Python MobileRestClient.delete_docs方法代碼示例

# 需要導入模塊: from keywords.MobileRestClient import MobileRestClient [as 別名]
# 或者: from keywords.MobileRestClient.MobileRestClient import delete_docs [as 別名]

#.........這裏部分代碼省略.........
    # Start replication ls_db -> sg_db
    repl_one = client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_admin_url, to_db=sg_db
    )

    client.verify_docs_present(url=sg_admin_url, db=sg_db, expected_docs=ls_db_docs)

    # Delay is to the updates here due to couchbase/couchbase-lite-ios#1277.
    # Basically, if your revs depth is small and someone is updating a doc past the revs depth before a push replication,
    # the push replication will have no common ancestor with sync_gateway causing conflicts to be created.
    # Adding a delay between updates helps this situation. There is an alternative for CBL mac and CBL NET to change the default revs client depth
    # but that is not configurable for Android.
    # Currently adding a delay will allow the replication to act as expected for all platforms now.
    client.update_docs(url=sg_url, db=sg_db, docs=ls_db_docs, number_updates=num_revs, delay=0.1, auth=sg_session)
    client.update_docs(url=ls_url, db=ls_db, docs=ls_db_docs, number_updates=num_revs, delay=0.1)

    # Start replication ls_db <- sg_db
    repl_two = client.start_replication(
        url=ls_url,
        continuous=True,
        from_url=sg_admin_url, from_db=sg_db,
        to_db=ls_db
    )

    client.wait_for_replication_status_idle(url=ls_url, replication_id=repl_one)
    client.wait_for_replication_status_idle(url=ls_url, replication_id=repl_two)

    client.compact_database(url=ls_url, db=ls_db)

    # LiteServ should only have 20 revisions due to built in client revs limit
    client.verify_revs_num_for_docs(url=ls_url, db=ls_db, docs=ls_db_docs, expected_revs_per_doc=20)

    # Sync Gateway should have 100 revisions due to the specified revs_limit in the sg config and possible conflict winners from the liteserv db
    client.verify_max_revs_num_for_docs(url=sg_url, db=sg_db, docs=ls_db_docs, expected_max_number_revs_per_doc=100, auth=sg_session)

    client.delete_conflicts(url=ls_url, db=ls_db, docs=ls_db_docs)
    expected_generation = num_revs + 1
    client.verify_docs_rev_generations(url=ls_url, db=ls_db, docs=ls_db_docs, expected_generation=expected_generation)
    client.verify_docs_rev_generations(url=sg_url, db=sg_db, docs=ls_db_docs, expected_generation=expected_generation, auth=sg_session)

    client.delete_docs(url=ls_url, db=ls_db, docs=ls_db_docs)
    client.verify_docs_deleted(url=ls_url, db=ls_db, docs=ls_db_docs)
    client.verify_docs_deleted(url=sg_admin_url, db=sg_db, docs=ls_db_docs)

    ls_db_docs = client.add_docs(url=ls_url, db=ls_db, number=num_docs, id_prefix=ls_db, channels=sg_user_channels)
    assert len(ls_db_docs) == 10

    expected_revs = num_revs + 20 + 2
    client.update_docs(url=ls_url, db=ls_db, docs=ls_db_docs, delay=0.1, number_updates=num_revs)

    client.verify_max_revs_num_for_docs(url=ls_url, db=ls_db, docs=ls_db_docs, expected_max_number_revs_per_doc=expected_revs)

    expected_generation = (num_revs * 2) + 3
    client.verify_docs_rev_generations(url=ls_url, db=ls_db, docs=ls_db_docs, expected_generation=expected_generation)

    client.compact_database(url=ls_url, db=ls_db)
    client.verify_revs_num_for_docs(url=ls_url, db=ls_db, docs=ls_db_docs, expected_revs_per_doc=20)

    client.stop_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_admin_url, to_db=sg_db
    )

    client.stop_replication(
        url=ls_url,
        continuous=True,
        from_url=sg_admin_url, from_db=sg_db,
        to_db=ls_db
    )

    client.wait_for_no_replications(url=ls_url)

    client.delete_conflicts(url=ls_url, db=ls_db, docs=ls_db_docs)
    client.delete_conflicts(url=sg_url, db=sg_db, docs=ls_db_docs, auth=sg_session)
    client.delete_docs(url=ls_url, db=ls_db, docs=ls_db_docs)

    # Start push pull and verify that all docs are deleted
    # Start replication ls_db -> sg_db
    repl_one = client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_admin_url, to_db=sg_db
    )

    # Start replication ls_db <- sg_db
    repl_two = client.start_replication(
        url=ls_url,
        continuous=True,
        from_url=sg_admin_url, from_db=sg_db,
        to_db=ls_db
    )

    client.verify_docs_deleted(url=ls_url, db=ls_db, docs=ls_db_docs)
    client.verify_docs_deleted(url=sg_admin_url, db=sg_db, docs=ls_db_docs)

# 需要導入模塊: from keywords.MobileRestClient import MobileRestClient [as 別名]
# 或者: from keywords.MobileRestClient.MobileRestClient import delete_docs [as 別名]
def test_inline_large_attachments(setup_client_syncgateway_test):
    """
    1.  Start LiteServ and Sync Gateway
    2.  Create 2 databases on LiteServ (ls_db1, ls_db2)
    3.  Start continuous push replication from ls_db1 to sg_db
    4.  Start continuous pull replication from sg_db to ls_db2
    5.  PUT 5 large inline attachments to ls_db1
    6.  DELETE the docs on ls_db1
    7.  PUT same 5 large inline attachments to ls_db1
    8.  Verify docs replicate to ls_db2
    9.  Purge ls_db1
    10. Verify docs removed
    """

    log_info("Running 'test_inline_large_attachments' ...")

    sg_url = setup_client_syncgateway_test["sg_url"]
    sg_url_admin = setup_client_syncgateway_test["sg_admin_url"]

    ls_url = setup_client_syncgateway_test["ls_url"]

    log_info("ls_url: {}".format(ls_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("sg_url_admin: {}".format(sg_url_admin))

    ls_db1 = "ls_db1"
    ls_db2 = "ls_db2"
    sg_db = "db"

    client = MobileRestClient()
    client.create_database(ls_url, ls_db1)
    client.create_database(ls_url, ls_db2)

    # Start continuous push replication from ls_db1 -> sg_db
    client.start_replication(url=ls_url, continuous=True, from_db=ls_db1, to_url=sg_url, to_db=sg_db)

    # Start continuous push replication from sg_db -> ls_db2
    client.start_replication(url=ls_url, continuous=True, from_url=sg_url, from_db=sg_db, to_db=ls_db2)

    # doc with 2.36 PNG attachment
    attachment_docs = []
    for i in range(5):
        doc = document.create_doc(
            doc_id="large_attach_{}".format(i), attachment_name="golden_gate_large.jpg", channels=["ABC"]
        )
        attachment_docs.append(doc)

    # add large attachments to ls_db1
    docs = []
    for doc in attachment_docs:
        docs.append(client.add_doc(ls_url, ls_db1, doc, use_post=False))

    # Delete docs
    client.delete_docs(ls_url, ls_db1, docs)
    client.verify_docs_deleted(ls_url, ls_db1, docs)

    # Recreated docs
    recreated_docs = []
    for doc in attachment_docs:
        recreated_docs.append(client.add_doc(ls_url, ls_db1, doc, use_post=False))

    client.verify_docs_present(ls_url, ls_db1, recreated_docs)
    client.verify_docs_present(sg_url, sg_db, recreated_docs)
    client.verify_docs_present(ls_url, ls_db2, recreated_docs)

    purged_docs = client.purge_docs(ls_url, ls_db1, recreated_docs)
    log_info(purged_docs)

    # All purged docs should have replicated and should be gone now.
    # This is currently failing due to some docs not replicating to ls_db2
    client.verify_docs_deleted(ls_url, ls_db1, recreated_docs)
    client.verify_docs_deleted(sg_url, sg_db, recreated_docs)
    client.verify_docs_deleted(ls_url, ls_db2, recreated_docs)