本文整理匯總了C#中System.Drawing.Graphics.IsVisible方法的典型用法代碼示例。如果您正苦於以下問題：C# Graphics.IsVisible方法的具體用法？C# Graphics.IsVisible怎麽用？C# Graphics.IsVisible使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類System.Drawing.Graphics的用法示例。
在下文中一共展示了Graphics.IsVisible方法的8個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C#代碼示例。
示例1: IsVisiblePoint
private void IsVisiblePoint(PaintEventArgs e)
{
// Set clip region.
Region clipRegion = new Region(new Rectangle(50, 50, 100, 100));
e.Graphics.SetClip(clipRegion, CombineMode.Replace);
// Set up coordinates of points.
int x1 = 100;
int y1 = 100;
int x2 = 200;
int y2 = 200;
Point point1 = new Point(x1, y1);
Point point2 = new Point(x2, y2);
// If point is visible, fill ellipse that represents it.
if (e.Graphics.IsVisible(point1))
{
e.Graphics.FillEllipse(new SolidBrush(Color.Red), x1, y1, 10, 10);
}
if (e.Graphics.IsVisible(point2))
{
e.Graphics.FillEllipse(new SolidBrush(Color.Blue), x2, y2, 10, 10);
}
}示例2: IsVisiblePointF
private void IsVisiblePointF(PaintEventArgs e)
{
// Set clip region.
Region clipRegion = new Region(new Rectangle(50, 50, 100, 100));
e.Graphics.SetClip(clipRegion, CombineMode.Replace);
// Set up coordinates of points.
float x1 = 100.0F;
float y1 = 100.0F;
float x2 = 200.0F;
float y2 = 200.0F;
PointF point1 = new PointF(x1, y1);
PointF point2 = new PointF(x2, y2);
// If point is visible, fill ellipse that represents it.
if (e.Graphics.IsVisible(point1))
{
e.Graphics.FillEllipse(new SolidBrush(Color.Red), x1, y1, 10.0F, 10.0F);
}
if (e.Graphics.IsVisible(point2))
{
e.Graphics.FillEllipse(new SolidBrush(Color.Blue), x2, y2, 10.0F, 10.0F);
}
}示例3: IsVisibleRectangle
private void IsVisibleRectangle(PaintEventArgs e)
{
// Set clip region.
Region clipRegion = new Region(new Rectangle(50, 50, 100, 100));
e.Graphics.SetClip(clipRegion, CombineMode.Replace);
// Set up coordinates of rectangles.
Rectangle rect1 = new Rectangle(100, 100, 20, 20);
Rectangle rect2 = new Rectangle(200, 200, 20, 20);
// If rectangle is visible, fill it.
if (e.Graphics.IsVisible(rect1))
{
e.Graphics.FillRectangle(new SolidBrush(Color.Red), rect1);
}
if (e.Graphics.IsVisible(rect2))
{
e.Graphics.FillRectangle(new SolidBrush(Color.Blue), rect2);
}
}示例4: IsVisibleRectangleF
private void IsVisibleRectangleF(PaintEventArgs e)
{
// Set clip region.
Region clipRegion = new Region(new Rectangle(50, 50, 100, 100));
e.Graphics.SetClip(clipRegion, CombineMode.Replace);
// Set up coordinates of rectangles.
RectangleF rect1 = new RectangleF(100.0F, 100.0F, 20.0F, 20.0F);
RectangleF rect2 = new RectangleF(200.0F, 200.0F, 20.0F, 20.0F);
// If rectangle is visible, fill it.
if (e.Graphics.IsVisible(rect1))
{
e.Graphics.FillRectangle(new SolidBrush(Color.Red), rect1);
}
if (e.Graphics.IsVisible(rect2))
{
e.Graphics.FillRectangle(new SolidBrush(Color.Blue), rect2);
}
}示例5: IsVisibleInt
private void IsVisibleInt(PaintEventArgs e)
{
// Set clip region.
Region clipRegion = new Region(new Rectangle(50, 50, 100, 100));
e.Graphics.SetClip(clipRegion, CombineMode.Replace);
// Set up coordinates of points.
int x1 = 100;
int y1 = 100;
int x2 = 200;
int y2 = 200;
// If point is visible, fill ellipse that represents it.
if (e.Graphics.IsVisible(x1, y1))
{
e.Graphics.FillEllipse(new SolidBrush(Color.Red), x1, y1, 10, 10);
}
if (e.Graphics.IsVisible(x2, y2))
{
e.Graphics.FillEllipse(new SolidBrush(Color.Blue), x2, y2, 10, 10);
}
}示例6: IsVisibleFloat
private void IsVisibleFloat(PaintEventArgs e)
{
// Set clip region.
Region clipRegion = new Region(new Rectangle(50, 50, 100, 100));
e.Graphics.SetClip(clipRegion, CombineMode.Replace);
// Set up coordinates of points.
float x1 = 100.0F;
float y1 = 100.0F;
float x2 = 200.0F;
float y2 = 200.0F;
// If point is visible, fill ellipse that represents it.
if (e.Graphics.IsVisible(x1, y1))
{
e.Graphics.FillEllipse(new SolidBrush(Color.Red), x1, y1, 10.0F, 10.0F);
}
if (e.Graphics.IsVisible(x2, y2))
{
e.Graphics.FillEllipse(new SolidBrush(Color.Blue), x2, y2, 10.0F, 10.0F);
}
}示例7: IsVisible4Int
private void IsVisible4Int(PaintEventArgs e)
{
// Set clip region.
Region clipRegion = new Region(new Rectangle(50, 50, 100, 100));
e.Graphics.SetClip(clipRegion, CombineMode.Replace);
// Set up coordinates of rectangles.
int x1 = 100;
int y1 = 100;
int width1 = 20;
int height1 = 20;
int x2 = 200;
int y2 = 200;
int width2 = 20;
int height2 = 20;
// If rectangle is visible, fill it.
if (e.Graphics.IsVisible(x1, y1, width1, height1))
{
e.Graphics.FillRectangle(new SolidBrush(Color.Red), x1, y1, width1, height1);
}
if (e.Graphics.IsVisible(x2, y2, width2, height2))
{
e.Graphics.FillRectangle(new SolidBrush(Color.Blue), x2, y2, width2, height2);
}
}示例8: IsVisible4Float
private void IsVisible4Float(PaintEventArgs e)
{
// Set clip region.
Region clipRegion = new Region(new Rectangle(50, 50, 100, 100));
e.Graphics.SetClip(clipRegion, CombineMode.Replace);
// Set up coordinates of rectangles.
float x1 = 100.0F;
float y1 = 100.0F;
float width1 = 20.0F;
float height1 = 20.0F;
float x2 = 200.0F;
float y2 = 200.0F;
float width2 = 20.0F;
float height2 = 20.0F;
// If rectangle is visible, fill it.
if (e.Graphics.IsVisible(x1, y1, width1, height1))
{
e.Graphics.FillRectangle(new SolidBrush(Color.Red), x1, y1, width1, height1);
}
if (e.Graphics.IsVisible(x2, y2, width2, height2))
{
e.Graphics.FillRectangle(new SolidBrush(Color.Blue), x2, y2, width2, height2);
}
}