Python support.find_unused_port方法代码示例

# 需要导入模块: from test import support [as 别名]
# 或者: from test.support import find_unused_port [as 别名]
def testSockName(self):
        # Testing getsockname()
        port = support.find_unused_port()
        sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
        self.addCleanup(sock.close)
        sock.bind(("0.0.0.0", port))
        name = sock.getsockname()
        # XXX(nnorwitz): http://tinyurl.com/os5jz seems to indicate
        # it reasonable to get the host's addr in addition to 0.0.0.0.
        # At least for eCos.  This is required for the S/390 to pass.
        try:
            my_ip_addr = socket.gethostbyname(socket.gethostname())
        except OSError:
            # Probably name lookup wasn't set up right; skip this test
            self.skipTest('name lookup failure')
        self.assertIn(name[0], ("0.0.0.0", my_ip_addr), '%s invalid' % name[0])
        self.assertEqual(name[1], port) 

# 需要导入模块: from test import support [as 别名]
# 或者: from test.support import find_unused_port [as 别名]
def test_getsockaddrarg(self):
        sock = socket.socket()
        self.addCleanup(sock.close)
        port = support.find_unused_port()
        big_port = port + 65536
        neg_port = port - 65536
        self.assertRaises(OverflowError, sock.bind, (HOST, big_port))
        self.assertRaises(OverflowError, sock.bind, (HOST, neg_port))
        # Since find_unused_port() is inherently subject to race conditions, we
        # call it a couple times if necessary.
        for i in itertools.count():
            port = support.find_unused_port()
            try:
                sock.bind((HOST, port))
            except OSError as e:
                if e.errno != errno.EADDRINUSE or i == 5:
                    raise
            else:
                break 

# 需要导入模块: from test import support [as 别名]
# 或者: from test.support import find_unused_port [as 别名]
def test_find_unused_port(self):
        port = support.find_unused_port()
        s = socket.socket()
        s.bind((support.HOST, port))
        s.close() 

# 需要导入模块: from test import support [as 别名]
# 或者: from test.support import find_unused_port [as 别名]
def test_connect(self):
        port = support.find_unused_port()
        cli = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
        self.addCleanup(cli.close)
        with self.assertRaises(OSError) as cm:
            cli.connect((HOST, port))
        self.assertEqual(cm.exception.errno, errno.ECONNREFUSED) 

# 需要导入模块: from test import support [as 别名]
# 或者: from test.support import find_unused_port [as 别名]
def test_create_connection(self):
        # Issue #9792: errors raised by create_connection() should have
        # a proper errno attribute.
        port = support.find_unused_port()
        with self.assertRaises(OSError) as cm:
            socket.create_connection((HOST, port))

        # Issue #16257: create_connection() calls getaddrinfo() against
        # 'localhost'.  This may result in an IPV6 addr being returned
        # as well as an IPV4 one:
        #   >>> socket.getaddrinfo('localhost', port, 0, SOCK_STREAM)
        #   >>> [(2,  2, 0, '', ('127.0.0.1', 41230)),
        #        (26, 2, 0, '', ('::1', 41230, 0, 0))]
        #
        # create_connection() enumerates through all the addresses returned
        # and if it doesn't successfully bind to any of them, it propagates
        # the last exception it encountered.
        #
        # On Solaris, ENETUNREACH is returned in this circumstance instead
        # of ECONNREFUSED.  So, if that errno exists, add it to our list of
        # expected errnos.
        expected_errnos = [ errno.ECONNREFUSED, ]
        if hasattr(errno, 'ENETUNREACH'):
            expected_errnos.append(errno.ENETUNREACH)

        self.assertIn(cm.exception.errno, expected_errnos) 

# 需要导入模块: from test import support [as 别名]
# 或者: from test.support import find_unused_port [as 别名]
def clientSetUp(self):
        self.source_port = support.find_unused_port() 

# 需要导入模块: from test import support [as 别名]
# 或者: from test.support import find_unused_port [as 别名]
def test_source_address_passive_connection(self):
        port = support.find_unused_port()
        self.client.source_address = (HOST, port)
        try:
            with self.client.transfercmd('list') as sock:
                self.assertEqual(sock.getsockname()[1], port)
        except OSError as e:
            if e.errno == errno.EADDRINUSE:
                self.skipTest("couldn't bind to port %d" % port)
            raise 

# 需要导入模块: from test import support [as 别名]
# 或者: from test.support import find_unused_port [as 别名]
def testSourceAddress(self):
        # connect
        port = support.find_unused_port()
        try:
            smtp = smtplib.SMTP(HOST, self.port, local_hostname='localhost',
                    timeout=3, source_address=('127.0.0.1', port))
            self.assertEqual(smtp.source_address, ('127.0.0.1', port))
            self.assertEqual(smtp.local_hostname, 'localhost')
            smtp.quit()
        except OSError as e:
            if e.errno == errno.EADDRINUSE:
                self.skipTest("couldn't bind to port %d" % port)
            raise 

# 需要导入模块: from test import support [as 别名]
# 或者: from test.support import find_unused_port [as 别名]
def setUp(self):
        self.serv = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
        self.port = support.bind_port(self.serv)
        self.source_port = support.find_unused_port()
        self.serv.listen()
        self.conn = None 

# 需要导入模块: from test import support [as 别名]
# 或者: from test.support import find_unused_port [as 别名]
def test_create_connection_local_addr(self):
        with test_utils.run_test_server() as httpd:
            port = support.find_unused_port()
            f = self.loop.create_connection(
                lambda: MyProto(loop=self.loop),
                *httpd.address, local_addr=(httpd.address[0], port))
            tr, pr = self.loop.run_until_complete(f)
            expected = pr.transport.get_extra_info('sockname')[1]
            self.assertEqual(port, expected)
            tr.close() 

# 需要导入模块: from test import support [as 别名]
# 或者: from test.support import find_unused_port [as 别名]
def setUp(self):
        self.serv = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
        self.port = support.bind_port(self.serv)
        self.source_port = support.find_unused_port()
        self.serv.listen(5)
        self.conn = None 

# 需要导入模块: from test import support [as 别名]
# 或者: from test.support import find_unused_port [as 别名]
def test_create_server_dual_stack(self):
        f_proto = asyncio.Future(loop=self.loop)

        class TestMyProto(MyProto):
            def connection_made(self, transport):
                super().connection_made(transport)
                f_proto.set_result(self)

        try_count = 0
        while True:
            try:
                port = support.find_unused_port()
                f = self.loop.create_server(TestMyProto, host=None, port=port)
                server = self.loop.run_until_complete(f)
            except OSError as ex:
                if ex.errno == errno.EADDRINUSE:
                    try_count += 1
                    self.assertGreaterEqual(5, try_count)
                    continue
                else:
                    raise
            else:
                break
        client = socket.socket()
        client.connect(('127.0.0.1', port))
        client.send(b'xxx')
        proto = self.loop.run_until_complete(f_proto)
        proto.transport.close()
        client.close()

        f_proto = asyncio.Future(loop=self.loop)
        client = socket.socket(socket.AF_INET6)
        client.connect(('::1', port))
        client.send(b'xxx')
        proto = self.loop.run_until_complete(f_proto)
        proto.transport.close()
        client.close()

        server.close()