当前位置: 首页>>代码示例>>Python>>正文


Python termios.tcgetattr方法代码示例

本文整理汇总了Python中termios.tcgetattr方法的典型用法代码示例。如果您正苦于以下问题:Python termios.tcgetattr方法的具体用法?Python termios.tcgetattr怎么用?Python termios.tcgetattr使用的例子?那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在termios的用法示例。


在下文中一共展示了termios.tcgetattr方法的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Python代码示例。

示例1: raw_terminal

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def raw_terminal():
        if not isatty(sys.stdin):
            f = open('/dev/tty')
            fd = f.fileno()
        else:
            fd = sys.stdin.fileno()
            f = None
        try:
            old_settings = termios.tcgetattr(fd)
            try:
                tty.setraw(fd)
                yield fd
            finally:
                termios.tcsetattr(fd, termios.TCSADRAIN, old_settings)
                sys.stdout.flush()
                if f is not None:
                    f.close()
        except termios.error:
            pass 
开发者ID:Frank-qlu,项目名称:recruit,代码行数:21,代码来源:_termui_impl.py

示例2: __init__

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def __init__(self, verbosity, maxJobs):
        super().__init__(verbosity)
        self.__index = 1
        self.__maxJobs = maxJobs
        self.__jobs = {}
        self.__slots = [None] * maxJobs
        self.__tasksDone = 0
        self.__tasksNum = 1

        # disable cursor
        print("\x1b[?25l")

        # disable echo
        try:
            import termios
            fd = sys.stdin.fileno()
            self.__oldTcAttr = termios.tcgetattr(fd)
            new = termios.tcgetattr(fd)
            new[3] = new[3] & ~termios.ECHO
            termios.tcsetattr(fd, termios.TCSADRAIN, new)
        except ImportError:
            pass 
开发者ID:BobBuildTool,项目名称:bob,代码行数:24,代码来源:tty.py

示例3: __init__

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def __init__(self):
        # setup
        CozmoTeleop.settings = termios.tcgetattr(sys.stdin)
        atexit.register(self.reset_terminal)

        # vars
        self.head_angle = STD_HEAD_ANGLE
        self.lift_height = STD_LIFT_HEIGHT

        # params
        self.lin_vel = rospy.get_param('~lin_vel', 0.2)
        self.ang_vel = rospy.get_param('~ang_vel', 1.5757)

        # pubs
        self._head_pub = rospy.Publisher('head_angle', Float64, queue_size=1)
        self._lift_pub = rospy.Publisher('lift_height', Float64, queue_size=1)
        self._cmd_vel_pub = rospy.Publisher('cmd_vel', Twist, queue_size=1) 
开发者ID:OTL,项目名称:cozmo_driver,代码行数:19,代码来源:teleop_key.py

示例4: getchar

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def getchar(echo):
        if not isatty(sys.stdin):
            f = open('/dev/tty')
            fd = f.fileno()
        else:
            fd = sys.stdin.fileno()
            f = None
        try:
            old_settings = termios.tcgetattr(fd)
            try:
                tty.setraw(fd)
                ch = os.read(fd, 32)
                if echo and isatty(sys.stdout):
                    sys.stdout.write(ch)
            finally:
                termios.tcsetattr(fd, termios.TCSADRAIN, old_settings)
                sys.stdout.flush()
                if f is not None:
                    f.close()
        except termios.error:
            pass
        _translate_ch_to_exc(ch)
        return ch.decode(get_best_encoding(sys.stdin), 'replace') 
开发者ID:jpush,项目名称:jbox,代码行数:25,代码来源:_termui_impl.py

示例5: read_char_no_blocking

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def read_char_no_blocking():
    ''' Read a character in nonblocking mode, if no characters are present in the buffer, return an empty string '''
    fd = sys.stdin.fileno()
    old_settings = termios.tcgetattr(fd)
    old_flags = fcntl.fcntl(fd, fcntl.F_GETFL)
    try:
        tty.setraw(fd, termios.TCSADRAIN)
        fcntl.fcntl(fd, fcntl.F_SETFL, old_flags | os.O_NONBLOCK)
        return sys.stdin.read(1)
    except IOError as e:
        ErrorNumber = e[0]
        # IOError with ErrorNumber 11(35 in Mac)  is thrown when there is nothing to read(Resource temporarily unavailable)
        if (sys.platform.startswith("linux") and ErrorNumber != 11) or (sys.platform == "darwin" and ErrorNumber != 35):
            raise
        return ""
    finally:
        fcntl.fcntl(fd, fcntl.F_SETFL, old_flags)
        termios.tcsetattr(fd, termios.TCSADRAIN, old_settings) 
开发者ID:pindexis,项目名称:marker,代码行数:20,代码来源:readchar.py

示例6: restore_echo

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def restore_echo():
    """Hack for https://stackoverflow.com/questions/6488275 equivalent
    issue with Nmap (from
    http://stackoverflow.com/a/8758047/3223422)

    """
    try:
        fdesc = sys.stdin.fileno()
    except ValueError:
        return
    try:
        attrs = termios.tcgetattr(fdesc)
    except termios.error:
        return
    attrs[3] = attrs[3] | termios.ECHO
    termios.tcsetattr(fdesc, termios.TCSADRAIN, attrs) 
开发者ID:cea-sec,项目名称:ivre,代码行数:18,代码来源:runscans.py

示例7: __init__

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def __init__(self, args, close_stderr=False):
    pid, fd = pty.fork()
    if pid == 0:
      # We're the child. Transfer control to command.
      if close_stderr:
        dev_null = os.open('/dev/null', 0)
        os.dup2(dev_null, 2)
      os.execvp(args[0], args)
    else:
      # Disable echoing.
      attr = termios.tcgetattr(fd)
      attr[3] = attr[3] & ~termios.ECHO
      termios.tcsetattr(fd, termios.TCSANOW, attr)
      # Set up a file()-like interface to the child process
      self.r = os.fdopen(fd, 'r', 1)
      self.w = os.fdopen(os.dup(fd), 'w', 1) 
开发者ID:google,项目名称:clusterfuzz,代码行数:18,代码来源:stack_symbolizer.py

示例8: init

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def init():
    if os.name == 'posix':
        global old
        old = termios.tcgetattr(fd)
        new = termios.tcgetattr(fd)
        new[3] = new[3] & ~termios.ICANON & ~termios.ECHO
        new[6][termios.VMIN] = 1
        new[6][termios.VTIME] = 0

        # -- Cambiar los atributos
        termios.tcsetattr(fd, termios.TCSANOW, new)

        # -- Restaurar el terminal a la salida
        atexit.register(cleanup_console)
    pass


# -------------------------------------
# Pequena prueba del modulo
# ------------------------------------- 
开发者ID:Obijuan,项目名称:simplez-fpga,代码行数:22,代码来源:consola_io.py

示例9: _set_baudrate

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def _set_baudrate(self, baudrate):
        if not isinstance(baudrate, int):
            raise TypeError("Invalid baud rate type, should be integer.")

        if baudrate not in Serial._BAUDRATE_TO_OSPEED:
            raise ValueError("Unknown baud rate: {:d}".format(baudrate))

        # Get tty attributes
        try:
            (iflag, oflag, cflag, lflag, ispeed, ospeed, cc) = termios.tcgetattr(self._fd)
        except termios.error as e:
            raise SerialError(e.errno, "Getting serial port attributes: " + e.strerror)

        # Modify tty attributes
        cflag &= ~(termios.CBAUD | termios.CBAUDEX)
        cflag |= Serial._BAUDRATE_TO_OSPEED[baudrate]
        ispeed = Serial._BAUDRATE_TO_OSPEED[baudrate]
        ospeed = Serial._BAUDRATE_TO_OSPEED[baudrate]

        # Set tty attributes
        try:
            termios.tcsetattr(self._fd, termios.TCSANOW, [iflag, oflag, cflag, lflag, ispeed, ospeed, cc])
        except termios.error as e:
            raise SerialError(e.errno, "Setting serial port attributes: " + e.strerror) 
开发者ID:vsergeev,项目名称:python-periphery,代码行数:26,代码来源:serial.py

示例10: _set_databits

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def _set_databits(self, databits):
        if not isinstance(databits, int):
            raise TypeError("Invalid data bits type, should be integer.")
        elif databits not in [5, 6, 7, 8]:
            raise ValueError("Invalid data bits, can be 5, 6, 7, 8.")

        # Get tty attributes
        try:
            (iflag, oflag, cflag, lflag, ispeed, ospeed, cc) = termios.tcgetattr(self._fd)
        except termios.error as e:
            raise SerialError(e.errno, "Getting serial port attributes: " + e.strerror)

        # Modify tty attributes
        cflag &= ~termios.CSIZE
        cflag |= Serial._DATABITS_TO_CFLAG[databits]

        # Set tty attributes
        try:
            termios.tcsetattr(self._fd, termios.TCSANOW, [iflag, oflag, cflag, lflag, ispeed, ospeed, cc])
        except termios.error as e:
            raise SerialError(e.errno, "Setting serial port attributes: " + e.strerror) 
开发者ID:vsergeev,项目名称:python-periphery,代码行数:23,代码来源:serial.py

示例11: _set_stopbits

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def _set_stopbits(self, stopbits):
        if not isinstance(stopbits, int):
            raise TypeError("Invalid stop bits type, should be integer.")
        elif stopbits not in [1, 2]:
            raise ValueError("Invalid stop bits, can be 1, 2.")

        # Get tty attributes
        try:
            (iflag, oflag, cflag, lflag, ispeed, ospeed, cc) = termios.tcgetattr(self._fd)
        except termios.error as e:
            raise SerialError(e.errno, "Getting serial port attributes: " + e.strerror)

        # Modify tty attributes
        cflag &= ~termios.CSTOPB
        if stopbits == 2:
            cflag |= termios.CSTOPB

        # Set tty attributes
        try:
            termios.tcsetattr(self._fd, termios.TCSANOW, [iflag, oflag, cflag, lflag, ispeed, ospeed, cc])
        except termios.error as e:
            raise SerialError(e.errno, "Setting serial port attributes: " + e.strerror) 
开发者ID:vsergeev,项目名称:python-periphery,代码行数:24,代码来源:serial.py

示例12: _set_xonxoff

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def _set_xonxoff(self, enabled):
        if not isinstance(enabled, bool):
            raise TypeError("Invalid enabled type, should be boolean.")

        # Get tty attributes
        try:
            (iflag, oflag, cflag, lflag, ispeed, ospeed, cc) = termios.tcgetattr(self._fd)
        except termios.error as e:
            raise SerialError(e.errno, "Getting serial port attributes: " + e.strerror)

        # Modify tty attributes
        iflag &= ~(termios.IXON | termios.IXOFF | termios.IXANY)
        if enabled:
            iflag |= (termios.IXON | termios.IXOFF)

        # Set tty attributes
        try:
            termios.tcsetattr(self._fd, termios.TCSANOW, [iflag, oflag, cflag, lflag, ispeed, ospeed, cc])
        except termios.error as e:
            raise SerialError(e.errno, "Setting serial port attributes: " + e.strerror) 
开发者ID:vsergeev,项目名称:python-periphery,代码行数:22,代码来源:serial.py

示例13: _set_vmin

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def _set_vmin(self, vmin):
        if not isinstance(vmin, int):
            raise TypeError("Invalid vmin type, should be integer.")
        elif not (0 <= vmin <= 255):
            raise ValueError("Invalid vmin, can be 0 to 255.")

        try:
            iflag, oflag, cflag, lflag, ispeed, ospeed, cc = termios.tcgetattr(self._fd)
        except termios.error as e:
            raise SerialError(e.errno, "Setting serial port attributes: " + e.strerror)

        cc[termios.VMIN] = vmin

        try:
            termios.tcsetattr(self._fd, termios.TCSANOW, [iflag, oflag, cflag, lflag, ispeed, ospeed, cc])
        except termios.error as e:
            raise SerialError(e.errno, "Setting serial port attributes: " + e.strerror)

        self._use_termios_timeout = vmin > 0 
开发者ID:vsergeev,项目名称:python-periphery,代码行数:21,代码来源:serial.py

示例14: _set_vtime

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def _set_vtime(self, vtime):
        if not isinstance(vtime, (float, int)):
            raise TypeError("Invalid vtime type, should be float or integer.")
        elif not (0 <= vtime <= 25.5):
            raise ValueError("Invalid vtime, can be 0 to 25.5 seconds.")

        try:
            iflag, oflag, cflag, lflag, ispeed, ospeed, cc = termios.tcgetattr(self._fd)
        except termios.error as e:
            raise SerialError(e.errno, "Setting serial port attributes: " + e.strerror)

        cc[termios.VTIME] = int(float(vtime) * 10.0)

        try:
            termios.tcsetattr(self._fd, termios.TCSANOW, [iflag, oflag, cflag, lflag, ispeed, ospeed, cc])
        except termios.error as e:
            raise SerialError(e.errno, "Setting serial port attributes: " + e.strerror) 
开发者ID:vsergeev,项目名称:python-periphery,代码行数:19,代码来源:serial.py

示例15: launch_proc_with_pty

# 需要导入模块: import termios [as 别名]
# 或者: from termios import tcgetattr [as 别名]
def launch_proc_with_pty(args, stdin=None, stdout=None, stderr=None, echo=True):
    """Similar to pty.fork, but handle stdin/stdout according to parameters
    instead of connecting to the pty

    :return tuple (subprocess.Popen, pty_master)
    """

    def set_ctty(ctty_fd, master_fd):
        os.setsid()
        os.close(master_fd)
        fcntl.ioctl(ctty_fd, termios.TIOCSCTTY, 0)
        if not echo:
            termios_p = termios.tcgetattr(ctty_fd)
            # termios_p.c_lflags
            termios_p[3] &= ~termios.ECHO
            termios.tcsetattr(ctty_fd, termios.TCSANOW, termios_p)
    (pty_master, pty_slave) = os.openpty()
    # pylint: disable=not-an-iterable
    p = yield from asyncio.create_subprocess_exec(*args,
        stdin=stdin,
        stdout=stdout,
        stderr=stderr,
        preexec_fn=lambda: set_ctty(pty_slave, pty_master))
    os.close(pty_slave)
    return p, open(pty_master, 'wb+', buffering=0) 
开发者ID:QubesOS,项目名称:qubes-core-admin,代码行数:27,代码来源:backup.py


注:本文中的termios.tcgetattr方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。