Python skopt.Optimizer方法代码示例

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def set_basic_conf(self):
        optimizer = skopt.Optimizer([(0, 20), (-100, 100)])
        previously_run_params = [[10, 0], [15, -20]]
        known_rewards = [-189, -1144]

        def cost(space, reporter):
            reporter(loss=(space["height"]**2 + space["width"]**2))

        search_alg = SkOptSearch(
            optimizer,
            ["width", "height"],
            metric="loss",
            mode="min",
            max_concurrent=1000,  # Here to avoid breaking back-compat.
            points_to_evaluate=previously_run_params,
            evaluated_rewards=known_rewards)
        return search_alg, cost 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def test_dict_list_space_representation():
    """
    Tests whether the conversion of the dictionary and list representation
    of a point from a search space works properly.
    """

    chef_space = {
        'Cooking time': (0, 1200),  # in minutes
        'Main ingredient': [
            'cheese', 'cherimoya', 'chicken', 'chard', 'chocolate', 'chicory'
        ],
        'Secondary ingredient': [
            'love', 'passion', 'dedication'
        ],
        'Cooking temperature': (-273.16, 10000.0)  # in Celsius
    }

    opt = Optimizer(dimensions=dimensions_aslist(chef_space))
    point = opt.ask()

    # check if the back transformed point and original one are equivalent
    assert_equal(
        point,
        point_aslist(chef_space, point_asdict(chef_space, point))
    ) 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def test_names_dimensions():
    # Define objective
    def objective(x, noise_level=0.1):
        return np.sin(5 * x[0]) * (1 - np.tanh(x[0] ** 2)) +\
               np.random.randn() * noise_level

    # Initialize Optimizer
    opt = Optimizer([(-2.0, 2.0)], n_initial_points=1)

    # Optimize
    for i in range(2):
        next_x = opt.ask()
        f_val = objective(next_x)
        res = opt.tell(next_x, f_val)

    # Plot results
    plots.plot_objective(res) 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def run(self):
        import skopt
        optimizer = self.input().load() if self.branch != 0 else skopt.Optimizer(
            dimensions=[skopt.space.Real(-5.0, 10.0), skopt.space.Real(0.0, 15.0)],
            random_state=1, n_initial_points=self.n_initial_points
        )

        x = optimizer.ask(n_points=self.n_parallel)

        output = yield Objective.req(self, x=x, iteration=self.branch, branch=-1)

        y = [f.load()["y"] for f in output["collection"].targets.values()]

        optimizer.tell(x, y)

        print("minimum after {} iterations: {}".format(self.branch + 1, min(optimizer.yi)))

        with self.output().localize("w") as tmp:
            tmp.dump(optimizer) 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def summarize(opt, steps):
    print('Summarizing best values')
    for kappa in [0] + list(np.logspace(-1, 1, steps-1)):
        new_opt = skopt.Optimizer(opt.space.dimensions,
                acq_func='LCB',
                acq_func_kwargs=dict(
                    kappa=kappa/5,
                    n_jobs=-1,
                    ),
                acq_optimizer='lbfgs',
                acq_optimizer_kwargs=dict(
                    n_restarts_optimizer=100,
                    )
                )
        new_opt.tell(opt.Xi, opt.yi)
        x = new_opt.ask()
        y, sigma = new_opt.models[-1].predict([x], return_std=True)
        y = -y # Change back from minimization to maximization
        def score_to_elo(score):
            if score <= -1:
                return float('inf')
            if score >= 1:
                return -float('inf')
            return 400 * math.log10((1+score)/(1-score))
        elo = score_to_elo(y)
        pm = max(abs(score_to_elo(y + sigma) - elo),
                 abs(score_to_elo(y - sigma) - elo))
        print(f'Best expectation (κ={kappa:.1f}): {x}'
              f' = {y[0]:.3f} ± {sigma[0]:.3f}'
              f' (ELO-diff {elo:.3f} ± {pm:.3f})') 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def test_constant_liar_runs(strategy, surrogate, acq_func):
    """
    Tests whether the optimizer runs properly during the random
    initialization phase and beyond

    Parameters
    ----------
    * `strategy` [string]:
        Name of the strategy to use during optimization.

    * `surrogate` [scikit-optimize surrogate class]:
        A class of the scikit-optimize surrogate used in Optimizer.
    """
    optimizer = Optimizer(
        base_estimator=surrogate(),
        dimensions=[Real(-5.0, 10.0), Real(0.0, 15.0)],
        acq_func=acq_func,
        acq_optimizer='sampling',
        random_state=0
    )

    # test arguments check
    assert_raises(ValueError, optimizer.ask, {"strategy": "cl_maen"})
    assert_raises(ValueError, optimizer.ask, {"n_points": "0"})
    assert_raises(ValueError, optimizer.ask, {"n_points": 0})

    for i in range(n_steps):
        x = optimizer.ask(n_points=n_points, strategy=strategy)
        # check if actually n_points was generated
        assert_equal(len(x), n_points)

        if "ps" in acq_func:
            optimizer.tell(x, [[branin(v), 1.1] for v in x])
        else:
            optimizer.tell(x, [branin(v) for v in x]) 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def test_all_points_different(strategy, surrogate):
    """
    Tests whether the parallel optimizer always generates
    different points to evaluate.

    Parameters
    ----------
    * `strategy` [string]:
        Name of the strategy to use during optimization.

    * `surrogate` [scikit-optimize surrogate class]:
        A class of the scikit-optimize surrogate used in Optimizer.
    """
    optimizer = Optimizer(
        base_estimator=surrogate(),
        dimensions=[Real(-5.0, 10.0), Real(0.0, 15.0)],
        acq_optimizer='sampling',
        random_state=1
    )

    tolerance = 1e-3  # distance above which points are assumed same
    for i in range(n_steps):
        x = optimizer.ask(n_points, strategy)
        optimizer.tell(x, [branin(v) for v in x])
        distances = pdist(x)
        assert all(distances > tolerance) 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def test_same_set_of_points_ask(strategy, surrogate):
    """
    For n_points not None, tests whether two consecutive calls to ask
    return the same sets of points.

    Parameters
    ----------
    * `strategy` [string]:
        Name of the strategy to use during optimization.

    * `surrogate` [scikit-optimize surrogate class]:
        A class of the scikit-optimize surrogate used in Optimizer.
    """

    optimizer = Optimizer(
        base_estimator=surrogate(),
        dimensions=[Real(-5.0, 10.0), Real(0.0, 15.0)],
        acq_optimizer='sampling',
        random_state=2
    )

    for i in range(n_steps):
        xa = optimizer.ask(n_points, strategy)
        xb = optimizer.ask(n_points, strategy)
        optimizer.tell(xa, [branin(v) for v in xa])
        assert_equal(xa, xb)  # check if the sets of points generated are equal 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def test_reproducible_runs(strategy, surrogate):
    # two runs of the optimizer should yield exactly the same results

    optimizer = Optimizer(
        base_estimator=surrogate(random_state=1),
        dimensions=[Real(-5.0, 10.0), Real(0.0, 15.0)],
        acq_optimizer='sampling',
        random_state=1
    )

    points = []
    for i in range(n_steps):
        x = optimizer.ask(n_points, strategy)
        points.append(x)
        optimizer.tell(x, [branin(v) for v in x])

    # the x's should be exaclty as they are in `points`
    optimizer = Optimizer(
        base_estimator=surrogate(random_state=1),
        dimensions=[Real(-5.0, 10.0), Real(0.0, 15.0)],
        acq_optimizer='sampling',
        random_state=1
    )
    for i in range(n_steps):
        x = optimizer.ask(n_points, strategy)

        assert points[i] == x

        optimizer.tell(x, [branin(v) for v in x]) 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def test_purely_categorical_space():
    # Test reproduces the bug in #908, make sure it doesn't come back
    dims = [Categorical(['a', 'b', 'c']), Categorical(['A', 'B', 'C'])]
    optimizer = Optimizer(dims, n_initial_points=1, random_state=3)

    x = optimizer.ask()
    # before the fix this call raised an exception
    optimizer.tell(x, 1.) 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def __init__(self, api_config, base_estimator="GP", acq_func="gp_hedge", n_initial_points=5):
        """Build wrapper class to use an optimizer in benchmark.

        Parameters
        ----------
        api_config : dict-like of dict-like
            Configuration of the optimization variables. See API description.
        base_estimator : {'GP', 'RF', 'ET', 'GBRT'}
            How to estimate the objective function.
        acq_func : {'LCB', 'EI', 'PI', 'gp_hedge', 'EIps', 'PIps'}
            Acquisition objective to decide next suggestion.
        n_initial_points : int
            Number of points to sample randomly before actual Bayes opt.
        """
        AbstractOptimizer.__init__(self, api_config)

        dimensions, self.round_to_values = ScikitOptimizer.get_sk_dimensions(api_config)

        # Older versions of skopt don't copy over the dimensions names during
        # normalization and hence the names are missing in
        # self.skopt.space.dimensions. Therefore, we save our own copy of
        # dimensions list to be safe. If we can commit to using the newer
        # versions of skopt we can delete self.dimensions.
        self.dimensions_list = tuple(dd.name for dd in dimensions)

        self.skopt = SkOpt(
            dimensions,
            n_initial_points=n_initial_points,
            base_estimator=base_estimator,
            acq_func=acq_func,
            acq_optimizer="auto",
            acq_func_kwargs={},
            acq_optimizer_kwargs={},
        ) 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def __init__(self, api_config, base_estimator="GP", acq_func="gp_hedge", n_initial_points=5, **kwargs):
        """Build wrapper class to use an optimizer in benchmark.

        Parameters
        ----------
        api_config : dict-like of dict-like
            Configuration of the optimization variables. See API description.
        base_estimator : {'GP', 'RF', 'ET', 'GBRT'}
            How to estimate the objective function.
        acq_func : {'LCB', 'EI', 'PI', 'gp_hedge', 'EIps', 'PIps'}
            Acquisition objective to decide next suggestion.
        n_initial_points : int
            Number of points to sample randomly before actual Bayes opt.
        """
        AbstractOptimizer.__init__(self, api_config)

        dimensions, self.round_to_values = ScikitOptimizer.get_sk_dimensions(api_config)

        # Older versions of skopt don't copy over the dimensions names during
        # normalization and hence the names are missing in
        # self.skopt.space.dimensions. Therefore, we save our own copy of
        # dimensions list to be safe. If we can commit to using the newer
        # versions of skopt we can delete self.dimensions.
        self.dimensions_list = tuple(dd.name for dd in dimensions)

        # Undecided where we want to pass the kwargs, so for now just make sure
        # they are blank
        assert len(kwargs) == 0

        self.skopt = SkOpt(
            dimensions,
            n_initial_points=n_initial_points,
            base_estimator=base_estimator,
            acq_func=acq_func,
            acq_optimizer="auto",
            acq_func_kwargs={},
            acq_optimizer_kwargs={},
        ) 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def requires(self):
        if self.branch == 0:
            return None
        return Optimizer.req(self, branch=self.branch - 1) 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def tell_pending(self, x):
        # 'skopt.Optimizer' takes care of points we
        # have not got results for.
        self.pending_points.add(tuple(x)) 

# 需要导入模块: import skopt [as 别名]
# 或者: from skopt import Optimizer [as 别名]
def __init__(
        self, search_space: Dict[str, distributions.BaseDistribution], skopt_kwargs: Dict[str, Any]
    ) -> None:

        self._search_space = search_space

        dimensions = []
        for name, distribution in sorted(self._search_space.items()):
            if isinstance(distribution, distributions.UniformDistribution):
                # Convert the upper bound from exclusive (optuna) to inclusive (skopt).
                high = np.nextafter(distribution.high, float("-inf"))
                dimension = space.Real(distribution.low, high)
            elif isinstance(distribution, distributions.LogUniformDistribution):
                # Convert the upper bound from exclusive (optuna) to inclusive (skopt).
                high = np.nextafter(distribution.high, float("-inf"))
                dimension = space.Real(distribution.low, high, prior="log-uniform")
            elif isinstance(distribution, distributions.IntUniformDistribution):
                count = (distribution.high - distribution.low) // distribution.step
                dimension = space.Integer(0, count)
            elif isinstance(distribution, distributions.IntLogUniformDistribution):
                low = distribution.low - 0.5
                high = distribution.high + 0.5
                dimension = space.Real(low, high, prior="log-uniform")
            elif isinstance(distribution, distributions.DiscreteUniformDistribution):
                count = int((distribution.high - distribution.low) // distribution.q)
                dimension = space.Integer(0, count)
            elif isinstance(distribution, distributions.CategoricalDistribution):
                dimension = space.Categorical(distribution.choices)
            else:
                raise NotImplementedError(
                    "The distribution {} is not implemented.".format(distribution)
                )

            dimensions.append(dimension)

        self._optimizer = skopt.Optimizer(dimensions, **skopt_kwargs)