Python QgsWkbTypes.LineGeometry方法代码示例

# 需要导入模块: from qgis.core import QgsWkbTypes [as 别名]
# 或者: from qgis.core.QgsWkbTypes import LineGeometry [as 别名]
def highlight(self, point):
        currExt = self.canvas.extent()

        leftPt = QgsPoint(currExt.xMinimum(), point.y())
        rightPt = QgsPoint(currExt.xMaximum(), point.y())

        topPt = QgsPoint(point.x(), currExt.yMaximum())
        bottomPt = QgsPoint(point.x(), currExt.yMinimum())

        horizLine = QgsGeometry.fromPolyline([leftPt, rightPt])
        vertLine = QgsGeometry.fromPolyline([topPt, bottomPt])

        self.crossRb.reset(QgsWkbTypes.LineGeometry)
        self.crossRb.addGeometry(horizLine, None)
        self.crossRb.addGeometry(vertLine, None)

        QTimer.singleShot(700, self.resetRubberbands) 

# 需要导入模块: from qgis.core import QgsWkbTypes [as 别名]
# 或者: from qgis.core.QgsWkbTypes import LineGeometry [as 别名]
def enableTools(self):
        self.digitizeAction.setEnabled(False)
        self.lineDigitizeAction.setEnabled(False)
        self.flipHorizontalAction.setEnabled(False)
        self.flipVerticalAction.setEnabled(False)
        self.rotate180Action.setEnabled(False)
        self.rotate90CWAction.setEnabled(False)
        self.rotate90CCWAction.setEnabled(False)
        layer = self.iface.activeLayer()

        if not layer or not layer.isValid() or (layer.type() != QgsMapLayer.VectorLayer) or not layer.isEditable():
            return
        wkbtype = layer.wkbType()
        geomtype = QgsWkbTypes.geometryType(wkbtype)
        self.lineDigitizeAction.setEnabled(True)
        if geomtype == QgsWkbTypes.PointGeometry or geomtype == QgsWkbTypes.LineGeometry:
            self.digitizeAction.setEnabled(True)
        if geomtype == QgsWkbTypes.LineGeometry or geomtype == QgsWkbTypes.PolygonGeometry:
            self.flipHorizontalAction.setEnabled(True)
            self.flipVerticalAction.setEnabled(True)
            self.rotate180Action.setEnabled(True)
            self.rotate90CWAction.setEnabled(True)
            self.rotate90CCWAction.setEnabled(True) 

# 需要导入模块: from qgis.core import QgsWkbTypes [as 别名]
# 或者: from qgis.core.QgsWkbTypes import LineGeometry [as 别名]
def canvasPressEvent(self, event):
        '''Capture the coordinate when the mouse button has been released.'''
        pt = self.snappoint(event.originalPixelPoint())
        self.removeVertexMarker()
        layer = self.iface.activeLayer()
        if layer is None:
            return
        if self.lineDigitizerDialog is None:
            from .lineDigitizer import LineDigitizerWidget
            self.lineDigitizerDialog = LineDigitizerWidget(self.iface, self.iface.mainWindow())

        if layer.geometryType() == QgsWkbTypes.LineGeometry:
            self.lineDigitizerDialog.closeLineCheckBox.setEnabled(True)
        else:
            self.lineDigitizerDialog.closeLineCheckBox.setEnabled(False)
        try:
            canvasCRS = self.canvas.mapSettings().destinationCrs()
            transform = QgsCoordinateTransform(canvasCRS, epsg4326, QgsProject.instance())
            pt4326 = transform.transform(pt.x(), pt.y())
            self.lineDigitizerDialog.setPoint(pt4326)
            self.lineDigitizerDialog.valuesTextEdit.clear()
            self.lineDigitizerDialog.show()
        except Exception:
            self.iface.messageBar().pushMessage("", tr("Clicked location is invalid"), level=Qgis.Warning, duration=4) 

# 需要导入模块: from qgis.core import QgsWkbTypes [as 别名]
# 或者: from qgis.core.QgsWkbTypes import LineGeometry [as 别名]
def __init__(self, iface):
        self.iface = iface
        self.canvas = iface.mapCanvas()
        self.crossRb = QgsRubberBand(self.canvas, QgsWkbTypes.LineGeometry)
        self.crossRb.setColor(Qt.red)
        self.provider = LatLonToolsProvider()
        self.toolbar = self.iface.addToolBar('Lat Lon Tools Toolbar')
        self.toolbar.setObjectName('LatLonToolsToolbar') 

# 需要导入模块: from qgis.core import QgsWkbTypes [as 别名]
# 或者: from qgis.core.QgsWkbTypes import LineGeometry [as 别名]
def RemoveCanvasRubberbands(self):
        ''' Remove Canvas Rubberbands '''
        self.poly_Canvas_RubberBand.reset()
        self.Track_Canvas_RubberBand.reset(QgsWkbTypes.LineGeometry)
        self.Cursor_Canvas_RubberBand.reset(QgsWkbTypes.PointGeometry) 

# 需要导入模块: from qgis.core import QgsWkbTypes [as 别名]
# 或者: from qgis.core.QgsWkbTypes import LineGeometry [as 别名]
def populateLayers(self):
        """
        Populates the layer combo box
        """
        self.layerCombo.clear()
        
        self.layerCombo.addItem(self.tr('Select a Layer'))
        
        layers = self.iface.mapCanvas().layers()
        for layer in layers:
            if isinstance(layer, QgsVectorLayer) and layer.geometryType() == QgsWkbTypes.LineGeometry:
                self.layerCombo.addItem(layer.name()) 

# 需要导入模块: from qgis.core import QgsWkbTypes [as 别名]
# 或者: from qgis.core.QgsWkbTypes import LineGeometry [as 别名]
def reset(self):
        """
        Resets the tool
        """
        if self.rubberBand:
            self.rubberBand.reset(QgsWkbTypes.LineGeometry)
        self.isEmittingPoint = False
        self.defineRubberBand() 

# 需要导入模块: from qgis.core import QgsWkbTypes [as 别名]
# 或者: from qgis.core.QgsWkbTypes import LineGeometry [as 别名]
def setToolEnabled(self, layer=None):
        """
        Checks if it is possible to use tool given layer editting conditions and type.
        :param layer: (QgsVectorLayer) layer that may have its lines flipped.
        :return: (bool) whether tool may be used.
        """
        if not isinstance(layer, QgsVectorLayer):
            layer = self.iface.mapCanvas().currentLayer()
        if not layer or not isinstance(layer, QgsVectorLayer) or layer.geometryType() != QgsWkbTypes.LineGeometry or not layer.isEditable():
            enabled = False
        else:
            enabled = True
        self.toolAction.setEnabled(enabled) if self.toolAction else None
        return enabled 

# 需要导入模块: from qgis.core import QgsWkbTypes [as 别名]
# 或者: from qgis.core.QgsWkbTypes import LineGeometry [as 别名]
def endGeometry(self):
        if len(self.geometry) > 2:
            if self.iface.activeLayer().geometryType() == QgsWkbTypes.PolygonGeometry:
                geom = QgsGeometry.fromPolygonXY([self.geometry])
            elif self.iface.activeLayer().geometryType() == QgsWkbTypes.LineGeometry:
                geom = QgsGeometry.fromPolylineXY(self.geometry)
            self.rubberBand.setToGeometry(geom, self.iface.activeLayer())
            self.createGeometry(geom) 

# 需要导入模块: from qgis.core import QgsWkbTypes [as 别名]
# 或者: from qgis.core.QgsWkbTypes import LineGeometry [as 别名]
def endGeometryFree(self):
        if len(self.geometry) > 2:
            if self.iface.activeLayer().geometryType() == QgsWkbTypes.PolygonGeometry:
                geom = QgsGeometry.fromPolygonXY([self.geometry])
            elif self.iface.activeLayer().geometryType() == QgsWkbTypes.LineGeometry:
                geom = QgsGeometry.fromPolylineXY(self.geometry + [self.geometry[0]])
            self.rubberBand.setToGeometry(geom, self.iface.activeLayer())
            self.createGeometry(geom) 

# 需要导入模块: from qgis.core import QgsWkbTypes [as 别名]
# 或者: from qgis.core.QgsWkbTypes import LineGeometry [as 别名]
def __init__(self, parent=None):
        ''' Constructor '''
        super().__init__(parent)
        self.surface = VideoWidgetSurface(self)
        self.setAttribute(Qt.WA_OpaquePaintEvent)

        self.Tracking_Video_RubberBand = QRubberBand(QRubberBand.Rectangle, self)
        self.Censure_RubberBand = QRubberBand(QRubberBand.Rectangle, self)

        color_blue = QColor(Qt.blue)
        color_black = QColor(Qt.black)
        color_amber = QColor(252, 215, 108)

        pal_blue = QPalette()
        pal_blue.setBrush(QPalette.Highlight, QBrush(color_blue))
        self.Tracking_Video_RubberBand.setPalette(pal_blue)

        pal_black = QPalette()
        pal_black.setBrush(QPalette.Highlight, QBrush(color_black))
        self.Censure_RubberBand.setPalette(pal_black)

        self._interaction = InteractionState()
        self._filterSatate = FilterState()

        self._isinit = False
        self._MGRS = False
        self.gt = None

        self.drawCesure = []
        self.poly_coordinates, self.drawPtPos, self.drawLines, self.drawMeasureDistance, self.drawMeasureArea, self.drawPolygon = [], [], [], [], [], []
        # Draw Polygon Canvas Rubberband
        self.poly_Canvas_RubberBand = QgsRubberBand(
            iface.mapCanvas(), True)  # Polygon type
        # set rubber band style
        self.poly_Canvas_RubberBand.setColor(color_amber)
        self.poly_Canvas_RubberBand.setWidth(3)

        # Tracking Canvas Rubberband
        self.Track_Canvas_RubberBand = QgsRubberBand(
            iface.mapCanvas(), QgsWkbTypes.LineGeometry)
        # set rubber band style
        self.Track_Canvas_RubberBand.setColor(color_blue)
        self.Track_Canvas_RubberBand.setWidth(5)

        # Cursor Canvas Rubberband
        self.Cursor_Canvas_RubberBand = QgsRubberBand(
            iface.mapCanvas(), QgsWkbTypes.PointGeometry)
        self.Cursor_Canvas_RubberBand.setWidth(4)
        self.Cursor_Canvas_RubberBand.setColor(QColor(255, 100, 100, 250))
        self.Cursor_Canvas_RubberBand.setIcon(QgsRubberBand.ICON_FULL_DIAMOND)

        self.parent = parent.parent()

        palette = self.palette()
        palette.setColor(QPalette.Background, Qt.transparent)
        self.setPalette(palette)

        self.origin, self.dragPos = QPoint(), QPoint()
        self.tapTimer = QBasicTimer()
        self.brush = QBrush(color_black)
        self.blue_Pen = QPen(color_blue, 3)