Python operator.mod方法代码示例

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def test_mod(Poly):
    # This checks commutation, not numerical correctness
    c1 = list(random((4,)) + .5)
    c2 = list(random((3,)) + .5)
    c3 = list(random((2,)) + .5)
    p1 = Poly(c1)
    p2 = Poly(c2)
    p3 = Poly(c3)
    p4 = p1 * p2 + p3
    c4 = list(p4.coef)
    assert_poly_almost_equal(p4 % p2, p3)
    assert_poly_almost_equal(p4 % c2, p3)
    assert_poly_almost_equal(c4 % p2, p3)
    assert_poly_almost_equal(p4 % tuple(c2), p3)
    assert_poly_almost_equal(tuple(c4) % p2, p3)
    assert_poly_almost_equal(p4 % np.array(c2), p3)
    assert_poly_almost_equal(np.array(c4) % p2, p3)
    assert_poly_almost_equal(2 % p2, Poly([2]))
    assert_poly_almost_equal(p2 % 2, Poly([0]))
    assert_raises(TypeError, op.mod, p1, Poly([0], domain=Poly.domain + 1))
    assert_raises(TypeError, op.mod, p1, Poly([0], window=Poly.window + 1))
    if Poly is Polynomial:
        assert_raises(TypeError, op.mod, p1, Chebyshev([0]))
    else:
        assert_raises(TypeError, op.mod, p1, Polynomial([0])) 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def _add_arithmetic_ops(cls):
        cls.__add__ = cls._create_arithmetic_method(operator.add)
        cls.__radd__ = cls._create_arithmetic_method(ops.radd)
        cls.__sub__ = cls._create_arithmetic_method(operator.sub)
        cls.__rsub__ = cls._create_arithmetic_method(ops.rsub)
        cls.__mul__ = cls._create_arithmetic_method(operator.mul)
        cls.__rmul__ = cls._create_arithmetic_method(ops.rmul)
        cls.__pow__ = cls._create_arithmetic_method(operator.pow)
        cls.__rpow__ = cls._create_arithmetic_method(ops.rpow)
        cls.__mod__ = cls._create_arithmetic_method(operator.mod)
        cls.__rmod__ = cls._create_arithmetic_method(ops.rmod)
        cls.__floordiv__ = cls._create_arithmetic_method(operator.floordiv)
        cls.__rfloordiv__ = cls._create_arithmetic_method(ops.rfloordiv)
        cls.__truediv__ = cls._create_arithmetic_method(operator.truediv)
        cls.__rtruediv__ = cls._create_arithmetic_method(ops.rtruediv)
        if not PY3:
            cls.__div__ = cls._create_arithmetic_method(operator.div)
            cls.__rdiv__ = cls._create_arithmetic_method(ops.rdiv)

        cls.__divmod__ = cls._create_arithmetic_method(divmod)
        cls.__rdivmod__ = cls._create_arithmetic_method(ops.rdivmod) 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def _add_numeric_methods_binary(cls):
        """
        Add in numeric methods.
        """
        cls.__add__ = _make_arithmetic_op(operator.add, cls)
        cls.__radd__ = _make_arithmetic_op(ops.radd, cls)
        cls.__sub__ = _make_arithmetic_op(operator.sub, cls)
        cls.__rsub__ = _make_arithmetic_op(ops.rsub, cls)
        cls.__rpow__ = _make_arithmetic_op(ops.rpow, cls)
        cls.__pow__ = _make_arithmetic_op(operator.pow, cls)

        cls.__truediv__ = _make_arithmetic_op(operator.truediv, cls)
        cls.__rtruediv__ = _make_arithmetic_op(ops.rtruediv, cls)
        if not compat.PY3:
            cls.__div__ = _make_arithmetic_op(operator.div, cls)
            cls.__rdiv__ = _make_arithmetic_op(ops.rdiv, cls)

        # TODO: rmod? rdivmod?
        cls.__mod__ = _make_arithmetic_op(operator.mod, cls)
        cls.__floordiv__ = _make_arithmetic_op(operator.floordiv, cls)
        cls.__rfloordiv__ = _make_arithmetic_op(ops.rfloordiv, cls)
        cls.__divmod__ = _make_arithmetic_op(divmod, cls)
        cls.__mul__ = _make_arithmetic_op(operator.mul, cls)
        cls.__rmul__ = _make_arithmetic_op(ops.rmul, cls) 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def _gen_fill_zeros(name):
    """
    Find the appropriate fill value to use when filling in undefined values
    in the results of the given operation caused by operating on
    (generally dividing by) zero.

    Parameters
    ----------
    name : str

    Returns
    -------
    fill_value : {None, np.nan, np.inf}
    """
    name = name.strip('__')
    if 'div' in name:
        # truediv, floordiv, div, and reversed variants
        fill_value = np.inf
    elif 'mod' in name:
        # mod, rmod
        fill_value = np.nan
    else:
        fill_value = None
    return fill_value 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def test_float_mod(self):
        # Check behaviour of % operator for IEEE 754 special cases.
        # In particular, check signs of zeros.
        mod = operator.mod

        self.assertEqualAndEqualSign(mod(-1.0, 1.0), 0.0)
        self.assertEqualAndEqualSign(mod(-1e-100, 1.0), 1.0)
        self.assertEqualAndEqualSign(mod(-0.0, 1.0), 0.0)
        self.assertEqualAndEqualSign(mod(0.0, 1.0), 0.0)
        self.assertEqualAndEqualSign(mod(1e-100, 1.0), 1e-100)
        self.assertEqualAndEqualSign(mod(1.0, 1.0), 0.0)

        self.assertEqualAndEqualSign(mod(-1.0, -1.0), -0.0)
        self.assertEqualAndEqualSign(mod(-1e-100, -1.0), -1e-100)
        self.assertEqualAndEqualSign(mod(-0.0, -1.0), -0.0)
        self.assertEqualAndEqualSign(mod(0.0, -1.0), -0.0)
        self.assertEqualAndEqualSign(mod(1e-100, -1.0), -1.0)
        self.assertEqualAndEqualSign(mod(1.0, -1.0), -0.0) 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def test_modulus_basic(self):
        dt = np.typecodes['AllInteger'] + np.typecodes['Float']
        for dt1, dt2 in itertools.product(dt, dt):
            for sg1, sg2 in itertools.product((+1, -1), (+1, -1)):
                if sg1 == -1 and dt1 in np.typecodes['UnsignedInteger']:
                    continue
                if sg2 == -1 and dt2 in np.typecodes['UnsignedInteger']:
                    continue
                fmt = 'dt1: %s, dt2: %s, sg1: %s, sg2: %s'
                msg = fmt % (dt1, dt2, sg1, sg2)
                a = np.array(sg1*71, dtype=dt1)[()]
                b = np.array(sg2*19, dtype=dt2)[()]
                div = self.floordiv(a, b)
                rem = self.mod(a, b)
                assert_equal(div*b + rem, a, err_msg=msg)
                if sg2 == -1:
                    assert_(b < rem <= 0, msg)
                else:
                    assert_(b > rem >= 0, msg) 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def test_float_modulus_roundoff(self):
        # gh-6127
        dt = np.typecodes['Float']
        for dt1, dt2 in itertools.product(dt, dt):
            for sg1, sg2 in itertools.product((+1, -1), (+1, -1)):
                fmt = 'dt1: %s, dt2: %s, sg1: %s, sg2: %s'
                msg = fmt % (dt1, dt2, sg1, sg2)
                a = np.array(sg1*78*6e-8, dtype=dt1)[()]
                b = np.array(sg2*6e-8, dtype=dt2)[()]
                div = self.floordiv(a, b)
                rem = self.mod(a, b)
                # Equal assertion should hold when fmod is used
                assert_equal(div*b + rem, a, err_msg=msg)
                if sg2 == -1:
                    assert_(b < rem <= 0, msg)
                else:
                    assert_(b > rem >= 0, msg) 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def check_mod(Poly):
    # This checks commutation, not numerical correctness
    c1 = list(random((4,)) + .5)
    c2 = list(random((3,)) + .5)
    c3 = list(random((2,)) + .5)
    p1 = Poly(c1)
    p2 = Poly(c2)
    p3 = Poly(c3)
    p4 = p1 * p2 + p3
    c4 = list(p4.coef)
    assert_poly_almost_equal(p4 % p2, p3)
    assert_poly_almost_equal(p4 % c2, p3)
    assert_poly_almost_equal(c4 % p2, p3)
    assert_poly_almost_equal(p4 % tuple(c2), p3)
    assert_poly_almost_equal(tuple(c4) % p2, p3)
    assert_poly_almost_equal(p4 % np.array(c2), p3)
    assert_poly_almost_equal(np.array(c4) % p2, p3)
    assert_poly_almost_equal(2 % p2, Poly([2]))
    assert_poly_almost_equal(p2 % 2, Poly([0]))
    assert_raises(TypeError, op.mod, p1, Poly([0], domain=Poly.domain + 1))
    assert_raises(TypeError, op.mod, p1, Poly([0], window=Poly.window + 1))
    if Poly is Polynomial:
        assert_raises(TypeError, op.mod, p1, Chebyshev([0]))
    else:
        assert_raises(TypeError, op.mod, p1, Polynomial([0])) 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def add_globals(self):
    "Add some Scheme standard procedures."
    import math, cmath, operator as op
    from functools import reduce
    self.update(vars(math))
    self.update(vars(cmath))
    self.update({
     '+':op.add, '-':op.sub, '*':op.mul, '/':op.itruediv, 'níl':op.not_, 'agus':op.and_,
     '>':op.gt, '<':op.lt, '>=':op.ge, '<=':op.le, '=':op.eq, 'mod':op.mod, 
     'frmh':cmath.sqrt, 'dearbhluach':abs, 'uas':max, 'íos':min,
     'cothrom_le?':op.eq, 'ionann?':op.is_, 'fad':len, 'cons':cons,
     'ceann':lambda x:x[0], 'tóin':lambda x:x[1:], 'iarcheangail':op.add,  
     'liosta':lambda *x:list(x), 'liosta?': lambda x:isa(x,list),
     'folamh?':lambda x: x == [], 'adamh?':lambda x: not((isa(x, list)) or (x == None)),
     'boole?':lambda x: isa(x, bool), 'scag':lambda f, x: list(filter(f, x)),
     'cuir_le':lambda proc,l: proc(*l), 'mapáil':lambda p, x: list(map(p, x)), 
     'lódáil':lambda fn: load(fn), 'léigh':lambda f: f.read(),
     'oscail_comhad_ionchuir':open,'dún_comhad_ionchuir':lambda p: p.file.close(), 
     'oscail_comhad_aschur':lambda f:open(f,'w'), 'dún_comhad_aschur':lambda p: p.close(),
     'dac?':lambda x:x is eof_object, 'luacháil':lambda x: evaluate(x),
     'scríobh':lambda x,port=sys.stdout:port.write(to_string(x) + '\n')})
    return self 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def test_binop_other(self, op, value, dtype):
        skip = {(operator.add, 'bool'),
                (operator.sub, 'bool'),
                (operator.mul, 'bool'),
                (operator.truediv, 'bool'),
                (operator.mod, 'i8'),
                (operator.mod, 'complex128'),
                (operator.mod, '<M8[ns]'),
                (operator.mod, '<m8[ns]'),
                (operator.pow, 'bool')}
        if (op, dtype) in skip:
            pytest.skip("Invalid combination {},{}".format(op, dtype))
        e = DummyElement(value, dtype)
        s = pd.DataFrame({"A": [e.value, e.value]}, dtype=e.dtype)
        result = op(s, e).dtypes
        expected = op(s, value).dtypes
        assert_series_equal(result, expected) 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def binary_repr(number, max_length = 1025):
    """
    Return the binary representation of the input *number* as a
    string.

    This is more efficient than using :func:`base_repr` with base 2.

    Increase the value of max_length for very large numbers. Note that
    on 32-bit machines, 2**1023 is the largest integer power of 2
    which can be converted to a Python float.
    """

    #assert number < 2L << max_length
    shifts = map (operator.rshift, max_length * [number], \
                  range (max_length - 1, -1, -1))
    digits = map (operator.mod, shifts, max_length * [2])
    if not digits.count (1): return 0
    digits = digits [digits.index (1):]
    return ''.join (map (repr, digits)).replace('L','') 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def test_floating_mod(backend, alltypes, df):
    if not backend.supports_floating_modulus:
        pytest.skip(
            '{} backend does not support floating modulus operation'.format(
                backend.name
            )
        )
    expr = operator.mod(alltypes.double_col, alltypes.smallint_col + 1)

    result = expr.execute()
    expected = operator.mod(df.double_col, df.smallint_col + 1)

    expected = backend.default_series_rename(expected)
    backend.assert_series_equal(
        result, expected, check_exact=False, check_less_precise=True
    ) 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def binary_repr(number, max_length = 1025):
    """
    Return the binary representation of the input *number* as a
    string.

    This is more efficient than using :func:`base_repr` with base 2.

    Increase the value of max_length for very large numbers. Note that
    on 32-bit machines, 2**1023 is the largest integer power of 2
    which can be converted to a Python float.
    """

    #assert number < 2L << max_length
    shifts = list(map (operator.rshift, max_length * [number], \
                  range (max_length - 1, -1, -1)))
    digits = list(map (operator.mod, shifts, max_length * [2]))
    if not digits.count (1): return 0
    digits = digits [digits.index (1):]
    return ''.join (map (repr, digits)).replace('L','') 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def binary_repr(number, max_length=1025):
    """
    Return the binary representation of the input *number* as a
    string.

    This is more efficient than using :func:`base_repr` with base 2.

    Increase the value of max_length for very large numbers. Note that
    on 32-bit machines, 2**1023 is the largest integer power of 2
    which can be converted to a Python float.
    """

#   assert number < 2L << max_length
    shifts = map(operator.rshift, max_length * [number],
                 range(max_length - 1, -1, -1))
    digits = list(map(operator.mod, shifts, max_length * [2]))
    if not digits.count(1):
        return 0
    digits = digits[digits.index(1):]
    return ''.join(map(repr, digits)).replace('L', '') 

# 需要导入模块: import operator [as 别名]
# 或者: from operator import mod [as 别名]
def testMod(self):
        self.binaryCheck(operator.mod, jmin=1)