Python PySimpleGUI.Checkbox方法代码示例

# 需要导入模块: import PySimpleGUI [as 别名]
# 或者: from PySimpleGUI import Checkbox [as 别名]
def lbas_group_node_line_generator(cls, group_id):
        return [
            sg.Text(f'LBAS Group {group_id}', **cls.LABEL_SETTINGS),
            sg.Checkbox(
                'Enabled',
                key=f'combat.lbas_group_{group_id}.enabled',
                font=cls.FONT_10,
                enable_events=True),
            sg.Combo(
                [''] + [x.display_name for x in NamedNodeEnum],
                key=f'combat.lbas_group_{group_id}_node_1',
                font=cls.FONT_10,
                size=(4, 1)),
            sg.Combo(
                [''] + [x.display_name for x in NamedNodeEnum],
                key=f'combat.lbas_group_{group_id}_node_2',
                font=cls.FONT_10,
                size=(4, 1)),
            cls.generate_clear_btn(
                f'combat.lbas_group_{group_id}_nodes')] 

# 需要导入模块: import PySimpleGUI [as 别名]
# 或者: from PySimpleGUI import Checkbox [as 别名]
def get_layout(cls):
        return sg.Column(
            [
                [
                    sg.Text('PvP Module', **cls.LABEL_SETTINGS),
                    sg.Checkbox(
                        'Enabled',
                        key='pvp.enabled',
                        enable_events=True)
                ],
                [
                    sg.Text('Fleet Preset', **cls.LABEL_SETTINGS),
                    sg.Combo(
                        [''] + [x for x in range(1, MAX_FLEET_PRESETS + 1)],
                        key='pvp.fleet_preset',
                        font=cls.FONT_10,
                        size=(13, 1))
                ]
            ],
            key='config_pvp_col',
            visible=False) 

# 需要导入模块: import PySimpleGUI [as 别名]
# 或者: from PySimpleGUI import Checkbox [as 别名]
def get_layout(cls):
        return sg.Column(
            [
                [
                    sg.Text('Expedition Module', **cls.LABEL_SETTINGS),
                    sg.Checkbox(
                        'Enabled',
                        key='expedition.enabled',
                        enable_events=True)
                ],
                cls.expedition_line_generator(2),
                cls.expedition_line_generator(3),
                cls.expedition_line_generator(4),
            ],
            key='config_expedition_col',
            visible=False) 

# 需要导入模块: import PySimpleGUI [as 别名]
# 或者: from PySimpleGUI import Checkbox [as 别名]
def MachineLearningGUI():
    sg.SetOptions(text_justification='right')

    flags = [[sg.Checkbox('Normalize', size=(12, 1), default=True), sg.Checkbox('Verbose', size=(20, 1))],
    [sg.Checkbox('Cluster', size=(12, 1)), sg.Checkbox('Flush Output', size=(20, 1), default=True)],
    [sg.Checkbox('Write Results', size=(12, 1)), sg.Checkbox('Keep Intermediate Data', size=(20, 1))],
    [sg.Checkbox('Normalize', size=(12, 1), default=True), sg.Checkbox('Verbose', size=(20, 1))],
    [sg.Checkbox('Cluster', size=(12, 1)), sg.Checkbox('Flush Output', size=(20, 1), default=True)],
    [sg.Checkbox('Write Results', size=(12, 1)), sg.Checkbox('Keep Intermediate Data', size=(20, 1))],]

    loss_functions = [[sg.Radio('Cross-Entropy', 'loss', size=(12, 1)), sg.Radio('Logistic', 'loss', default=True, size=(12, 1))],
        [sg.Radio('Hinge', 'loss', size=(12, 1)), sg.Radio('Huber', 'loss', size=(12, 1))],
        [sg.Radio('Kullerback', 'loss', size=(12, 1)), sg.Radio('MAE(L1)', 'loss', size=(12, 1))],
        [sg.Radio('MSE(L2)', 'loss', size=(12, 1)), sg.Radio('MB(L0)', 'loss', size=(12, 1))],]

    command_line_parms = [[sg.Text('Passes', size=(8, 1)), sg.Spin(values=[i for i in range(1, 1000)], initial_value=20, size=(6, 1)),
         sg.Text('Steps', size=(8, 1), pad=((7,3))), sg.Spin(values=[i for i in range(1, 1000)], initial_value=20, size=(6, 1))],
        [sg.Text('ooa', size=(8, 1)), sg.In(default_text='6', size=(8, 1)), sg.Text('nn', size=(8, 1)),
         sg.In(default_text='10', size=(10, 1))],
        [sg.Text('q', size=(8, 1)), sg.In(default_text='ff', size=(8, 1)), sg.Text('ngram', size=(8, 1)),
         sg.In(default_text='5', size=(10, 1))],
        [sg.Text('l', size=(8, 1)), sg.In(default_text='0.4', size=(8, 1)), sg.Text('Layers', size=(8, 1)),
         sg.Drop(values=('BatchNorm', 'other'), auto_size_text=True)],]

    layout = [[sg.Frame('Command Line Parameteres', command_line_parms, title_color='green', font='Any 12')],
              [sg.Frame('Flags', flags, font='Any 12', title_color='blue')],
                [sg.Frame('Loss Functions',  loss_functions, font='Any 12', title_color='red')],
              [sg.Submit(), sg.Cancel()]]

    window = sg.Window('Machine Learning Front End', font=("Helvetica", 12)).Layout(layout)
    button, values = window.Read()
    sg.SetOptions(text_justification='left')

    print(button, values) 

# 需要导入模块: import PySimpleGUI [as 别名]
# 或者: from PySimpleGUI import Checkbox [as 别名]
def Launcher2():
    sg.ChangeLookAndFeel('GreenTan')
    window = sg.Window('Script launcher')

    filelist = glob.glob(LOCATION_OF_YOUR_SCRIPTS+'*.py')
    namesonly = []
    for file in filelist:
        namesonly.append(ntpath.basename(file))

    layout =  [
                [sg.Listbox(values=namesonly, size=(30, 19), select_mode=sg.SELECT_MODE_EXTENDED, key='demolist'), sg.Output(size=(88, 20), font='Courier 10')],
                [sg.Checkbox('Wait for program to complete', default=False, key='wait')],
                [sg.Button('Run'), sg.Button('Shortcut 1'), sg.Button('Fav Program'), sg.Button('EXIT')],
                ]

    window.Layout(layout)

    # ---===--- Loop taking in user input  --- #
    while True:
        event, values = window.Read()
        if event in ('EXIT', None):
            break           # exit button clicked
        if event in ('Shortcut 1', 'Fav Program'):
            print('Quickly launch your favorite programs using these shortcuts')
            print('Or  copy files to your github folder.  Or anything else you type on the command line')
            # copyfile(source, dest)
        elif event == 'Run':
            for index, file in enumerate(values['demolist']):
                print('Launching %s'%file)
                window.Refresh()          # make the print appear immediately
                if values['wait']:
                    execute_command_blocking(LOCATION_OF_YOUR_SCRIPTS + file)
                else:
                    execute_command_nonblocking(LOCATION_OF_YOUR_SCRIPTS + file) 

# 需要导入模块: import PySimpleGUI [as 别名]
# 或者: from PySimpleGUI import Checkbox [as 别名]
def main():
    layout = [[sg.Text('Window Snapshot', key='-T-', font='Any 20', justification='c')],
              [sg.Listbox(values=[' '], size=(50, 20), select_mode=sg.SELECT_MODE_EXTENDED, font=('Courier', 12), key='-PROCESSES-')],
              [sg.Checkbox('Show only Python programs', default=True, key='-PYTHON ONLY-')],
              [sg.Checkbox('Crop image', default=True, key='-CROP-')],
              [sg.Multiline(size=(63, 10), font=('Courier', 10), key='-ML-')],
              [sg.Text('Output folder:'), sg.In(os.path.dirname(__file__), key='-FOLDER-'), sg.FolderBrowse()],
              [sg.Button('Refresh'),
               sg.Button('Snapshot', button_color=('white', 'DarkOrange2')),
               sg.Exit(button_color=('white', 'sea green'))]]

    window = sg.Window('Window Snapshot', layout, keep_on_top=True, auto_size_buttons=False, default_button_element_size=(12, 1), finalize=True)

    window['-T-'].expand(True, False, False)  # causes text to center by expanding the element

    sg.cprint_set_output_destination(window, '-ML-')
    show_list_by_name(window, '-PROCESSES-', True)

    # ----------------  main loop  ----------------
    while True:
        # --------- Read and update window --------
        event, values = window.read()
        if event in (sg.WIN_CLOSED, 'Exit'):
            break

        # --------- Do Button Operations --------
        if event == 'Refresh':
            show_list_by_name(window, '-PROCESSES-', values['-PYTHON ONLY-'])
        elif event == 'Snapshot':
            for title in values['-PROCESSES-']:
                sg.cprint('Saving: ', end='', c='white on red')
                sg.cprint(title)
                output_filename = os.path.join(values['-FOLDER-'], f'{title}.png')
                save_win(output_filename, title, values['-CROP-'])
    window.close() 

# 需要导入模块: import PySimpleGUI [as 别名]
# 或者: from PySimpleGUI import Checkbox [as 别名]
def get_layout(cls):
        return sg.Column(
            [
                [
                    sg.Text('Scheduler', **cls.LABEL_SETTINGS),
                    sg.Checkbox(
                        'Enabled', key='scheduler.enabled', enable_events=True)
                ],
                [
                    sg.Text('Scheduler Rules', **cls.LABEL_SETTINGS),
                    sg.Listbox(
                        key='scheduler.rules',
                        values=[],
                        font=cls.FONT_10,
                        size=(54, 4),
                        enable_events=True)
                ],
                [
                    sg.Text('', **cls.LABEL_SETTINGS),
                    cls.generate_edit_btn('scheduler.rules', size=(20, 1)),
                    cls.generate_remove_btn('scheduler.rules', size=(20, 1)),
                    cls.generate_clear_btn('scheduler.rules', size=(20, 1)),
                ]
            ],
            key='config_scheduler_col',
            visible=False) 

# 需要导入模块: import PySimpleGUI [as 别名]
# 或者: from PySimpleGUI import Checkbox [as 别名]
def get_layout(cls):
        return sg.Column(
            [
                [
                    sg.Text('Passive Repair', **cls.LABEL_SETTINGS),
                    sg.Checkbox(
                        'Enabled',
                        key='passive_repair.enabled',
                        enable_events=True)
                ],
                [
                    sg.Text('Repair Threshold', **cls.LABEL_SETTINGS),
                    sg.Combo(
                        [
                            x.display_name for x in DamageStateEnum
                            if x in cls.VALID_DAMAGE_STATES],
                        default_value=DamageStateEnum.SCRATCH.display_name,
                        key='passive_repair.repair_threshold',
                        font=cls.FONT_10,
                        size=(13, 1))
                ],
                [
                    sg.Text('Slots to Reserve', **cls.LABEL_SETTINGS),
                    sg.Spin(
                        [x for x in range(
                            cls.MIN_SLOTS_RESERVED,
                            cls.MAX_SLOTS_RESERVED + 1)],
                        0,
                        key='passive_repair.slots_to_reserve',
                        font=cls.FONT_10,
                        size=(5, 1))
                ]
            ],
            key='config_passive_repair_col',
            visible=False) 

# 需要导入模块: import PySimpleGUI [as 别名]
# 或者: from PySimpleGUI import Checkbox [as 别名]
def generate_quest_checkboxes(cls, quests):
        qlist = [[]]
        for idx, q in enumerate(quests):
            qlist[-1].append(sg.Checkbox(
                q,
                key=f'quest_c.q.{q}',
                font=cls.FONT,
                enable_events=True
            ))
            if (idx + 1) % cls.QUESTS_PER_LINE == 0:
                qlist.append([])
        return qlist 

# 需要导入模块: import PySimpleGUI [as 别名]
# 或者: from PySimpleGUI import Checkbox [as 别名]
def get_layout(cls):
        return sg.Column(
            [
                [
                    sg.Text('Event Reset Module', **cls.LABEL_SETTINGS),
                    sg.Checkbox(
                        'Enabled',
                        key='event_reset.enabled',
                        enable_events=True)
                ],
                [
                    sg.Text('Reset Frequency', **cls.LABEL_SETTINGS),
                    sg.Spin(
                        [x for x in range(1, 11)],
                        2,
                        key='event_reset.frequency',
                        font=cls.FONT_10,
                        size=(4, 1))
                ],
                [
                    sg.Text('Reset Difficulty', **cls.LABEL_SETTINGS),
                    sg.Combo(
                        [
                            x.display_name for x in EventDifficultyEnum
                            if x is not EventDifficultyEnum.NONE],
                        default_value=EventDifficultyEnum.NORMAL.display_name,
                        key='event_reset.reset_difficulty',
                        font=cls.FONT_10,
                        size=(8, 1))
                ],
                [
                    sg.Text('Farm Difficulty', **cls.LABEL_SETTINGS),
                    sg.Combo(
                        [
                            x.display_name for x in EventDifficultyEnum
                            if x is not EventDifficultyEnum.NONE],
                        default_value=EventDifficultyEnum.EASY.display_name,
                        key='event_reset.farm_difficulty',
                        font=cls.FONT_10,
                        size=(8, 1))
                ]
            ],
            key='config_event_reset_col',
            visible=False) 

# 需要导入模块: import PySimpleGUI [as 别名]
# 或者: from PySimpleGUI import Checkbox [as 别名]
def HowDoI():
    '''
    Make and show a window (PySimpleGUI form) that takes user input and sends to the HowDoI web oracle
    Excellent example of 2 GUI concepts
        1. Output Element that will show text in a scrolled window
        2. Non-Window-Closing Buttons - These buttons will cause the form to return with the form's values, but doesn't close the form
    :return: never returns
    '''
    # -------  Make a new Window  ------- #
    sg.ChangeLookAndFeel('GreenTan')            # give our form a spiffy set of colors

    layout =  [
                [sg.Text('Ask and your answer will appear here....', size=(40, 1))],
                [sg.Output(size=(127, 30), font=('Helvetica 10'))],
                [ sg.Spin(values=(1, 2, 3, 4), initial_value=1, size=(2, 1), key='Num Answers', font='Helvetica 15'),
                  sg.Text('Num Answers',font='Helvetica 15'), sg.Checkbox('Display Full Text', key='full text', font='Helvetica 15'),
                sg.T('Command History', font='Helvetica 15'), sg.T('', size=(40,3), text_color=sg.BLUES[0], key='history')],
                [sg.Multiline(size=(85, 5), enter_submits=True, key='query', do_not_clear=False),
                sg.ReadButton('SEND', button_color=(sg.YELLOWS[0], sg.BLUES[0]), bind_return_key=True),
                sg.Button('EXIT', button_color=(sg.YELLOWS[0], sg.GREENS[0]))]
              ]

    window = sg.Window('How Do I ??',
                       default_element_size=(30, 2),
                       font=('Helvetica',' 13'),
                       default_button_element_size=(8,2),
                       icon=DEFAULT_ICON,
                       return_keyboard_events=True).Layout(layout)

    # ---===--- Loop taking in user input and using it to query HowDoI --- #
    command_history = []
    history_offset = 0
    while True:
        (button, value) = window.Read()
        if button == 'SEND':
            query = value['query'].rstrip()
            print(query)
            QueryHowDoI(query, value['Num Answers'], value['full text'])  # send the string to HowDoI
            command_history.append(query)
            history_offset = len(command_history)-1
            window.FindElement('query').Update('')                       # manually clear input because keyboard events blocks clear
            window.FindElement('history').Update('\n'.join(command_history[-3:]))
        elif button in (None, 'EXIT'):            # if exit button or closed using X
            break
        elif 'Up' in button and len(command_history):                                # scroll back in history
            command = command_history[history_offset]
            history_offset -= 1 * (history_offset > 0)      # decrement is not zero
            window.FindElement('query').Update(command)
        elif 'Down' in button and len(command_history):                              # scroll forward in history
            history_offset += 1 * (history_offset < len(command_history)-1) # increment up to end of list
            command = command_history[history_offset]
            window.FindElement('query').Update(command)
        elif 'Escape' in button:                            # clear currently line
            window.FindElement('query').Update('') 

# 需要导入模块: import PySimpleGUI [as 别名]
# 或者: from PySimpleGUI import Checkbox [as 别名]
def Everything():
    sg.ChangeLookAndFeel('TanBlue')

    column1 = [
        [sg.Text('Column 1', background_color=sg.DEFAULT_BACKGROUND_COLOR, justification='center', size=(10, 1))],
        [sg.Spin(values=('Spin Box 1', '2', '3'), initial_value='Spin Box 1', key='spin1')],
        [sg.Spin(values=('Spin Box 1', '2', '3'), initial_value='Spin Box 2', key='spin2')],
        [sg.Spin(values=('Spin Box 1', '2', '3'), initial_value='Spin Box 3', key='spin3')]]

    layout = [
        [sg.Text('All graphic widgets in one form!', size=(30, 1), font=("Helvetica", 25))],
        [sg.Text('Here is some text.... and a place to enter text')],
        [sg.InputText('This is my text', key='in1', do_not_clear=True)],
        [sg.Checkbox('Checkbox', key='cb1'), sg.Checkbox('My second checkbox!', key='cb2', default=True)],
        [sg.Radio('My first Radio!     ', "RADIO1", key='rad1', default=True),
         sg.Radio('My second Radio!', "RADIO1", key='rad2')],
        [sg.Multiline(default_text='This is the default Text should you decide not to type anything', size=(35, 3),
                      key='multi1', do_not_clear=True),
         sg.Multiline(default_text='A second multi-line', size=(35, 3), key='multi2', do_not_clear=True)],
        [sg.InputCombo(('Combobox 1', 'Combobox 2'), key='combo', size=(20, 1)),
         sg.Slider(range=(1, 100), orientation='h', size=(34, 20), key='slide1', default_value=85)],
        [sg.InputOptionMenu(('Menu Option 1', 'Menu Option 2', 'Menu Option 3'), key='optionmenu')],
        [sg.Listbox(values=('Listbox 1', 'Listbox 2', 'Listbox 3'), size=(30, 3), key='listbox'),
         sg.Slider(range=(1, 100), orientation='v', size=(5, 20), default_value=25, key='slide2', ),
         sg.Slider(range=(1, 100), orientation='v', size=(5, 20), default_value=75, key='slide3', ),
         sg.Slider(range=(1, 100), orientation='v', size=(5, 20), default_value=10, key='slide4'),
         sg.Column(column1, background_color='gray34')],
        [sg.Text('_' * 80)],
        [sg.Text('Choose A Folder', size=(35, 1))],
        [sg.Text('Your Folder', size=(15, 1), auto_size_text=False, justification='right'),
         sg.InputText('Default Folder', key='folder', do_not_clear=True), sg.FolderBrowse()],
        [sg.Button('Exit'),
         sg.Text(' ' * 40), sg.Button('SaveSettings'), sg.Button('LoadSettings')]
    ]

    window = sg.Window('Form Fill Demonstration', default_element_size=(40, 1), grab_anywhere=False)
    # button, values = window.LayoutAndRead(layout, non_blocking=True)
    window.Layout(layout)

    while True:
        event, values = window.Read()

        if event == 'SaveSettings':
            filename = sg.PopupGetFile('Save Settings', save_as=True, no_window=True)
            window.SaveToDisk(filename)
            # save(values)
        elif event == 'LoadSettings':
            filename = sg.PopupGetFile('Load Settings', no_window=True)
            window.LoadFromDisk(filename)
            # load(form)
        elif event in ('Exit', None):
            break

    # window.CloseNonBlocking()