Python QtCore.QLineF方法代码示例

# 需要导入模块: from PyQt5 import QtCore [as 别名]
# 或者: from PyQt5.QtCore import QLineF [as 别名]
def anchorMove(self, node, mousePos):
        """
        Move the selected anchor point.
        :type node: AbstractNode
        :type mousePos: QtCore.QPointF
        """
        nodePos = node.pos()
        snapToGrid = self.session.action('toggle_grid').isChecked()
        mousePos = snap(mousePos, self.diagram.GridSize, snapToGrid)
        path = self.mapFromItem(node, node.painterPath())
        if path.contains(mousePos):
            # Mouse is inside the shape => use this position as anchor point.
            pos = nodePos if distance(mousePos, nodePos) < 10.0 else mousePos
        else:
            # Mouse is outside the shape => use the intersection point as anchor point.
            pos = node.intersection(QtCore.QLineF(mousePos, nodePos))
            for pair in set(permutations([-1, -1, 0, 0, 1, 1], 2)):
                p = pos + QtCore.QPointF(*pair)
                if path.contains(p):
                    pos = p
                    break

        node.setAnchor(self, pos) 

# 需要导入模块: from PyQt5 import QtCore [as 别名]
# 或者: from PyQt5.QtCore import QLineF [as 别名]
def createPath(self, source, target, points):
        """
        Returns a list of QtCore.QLineF instance representing all the visible edge pieces.
        Subpaths which are obscured by the source or target shape are excluded by this method.
        :type source: AbstractNode
        :type target: AbstractNode
        :type points: list
        :rtype: list
        """
        # Get the source node painter path (the source node is always available).
        A = self.mapFromItem(source, source.painterPath())
        B = self.mapFromItem(target, target.painterPath()) if target else None
        # Exclude all the "subpaths" which are not visible (obscured by the shapes).
        return [x for x in (QtCore.QLineF(points[i], points[i + 1]) for i in range(len(points) - 1)) \
                    if (not A.contains(x.p1()) or not A.contains(x.p2())) and \
                        (not B or (not B.contains(x.p1()) or not B.contains(x.p2())))] 

# 需要导入模块: from PyQt5 import QtCore [as 别名]
# 或者: from PyQt5.QtCore import QLineF [as 别名]
def _generate(self, p):
        hl = np.array(
            [QtCore.QLineF(q.id, q.low, q.id, q.high) for q in Quotes]
        )
        op = np.array(
            [QtCore.QLineF(q.id - self.w, q.open, q.id, q.open) for q in Quotes]
        )
        cl = np.array(
            [
                QtCore.QLineF(q.id + self.w, q.close, q.id, q.close)
                for q in Quotes
            ]
        )
        lines = np.concatenate([hl, op, cl])
        long_bars = np.resize(Quotes.close > Quotes.open, len(lines))
        short_bars = np.resize(Quotes.close < Quotes.open, len(lines))

        p.setPen(self.bull_brush)
        p.drawLines(*lines[long_bars])

        p.setPen(self.bear_brush)
        p.drawLines(*lines[short_bars]) 

# 需要导入模块: from PyQt5 import QtCore [as 别名]
# 或者: from PyQt5.QtCore import QLineF [as 别名]
def add_port(self, port, is_subport = False):
        if (port.width is None) or (port.width == 0):
            x,y = port.midpoint
            cs = 1 # cross size
            pn = QPointF(x, y+cs)
            ps = QPointF(x, y-cs)
            pe = QPointF(x+cs, y)
            pw = QPointF(x-cs, y)
            qline1 = self.scene.addLine(QLineF(pn, ps))
            qline2 = self.scene.addLine(QLineF(pw, pe))
            port_shapes = [qline1,qline2]
        else:
            point1, point2 = port.endpoints
            point1 = QPointF(point1[0], point1[1])
            point2 = QPointF(point2[0], point2[1])
            qline = self.scene.addLine(QLineF(point1, point2))
            arrow_points = np.array([[0,0],[10,0],[6,4],[6,2],[0,2]])/(40)*port.width
            arrow_qpoly = QPolygonF( [QPointF(p[0], p[1]) for p in arrow_points] )
            port_scene_poly = self.scene.addPolygon(arrow_qpoly)
            port_scene_poly.setRotation(port.orientation)
            port_scene_poly.moveBy(port.midpoint[0], port.midpoint[1])
            port_shapes = [qline,port_scene_poly]
        qtext = self.scene.addText(str(port.name), self.portfont)
        port_items = port_shapes + [qtext]
        rad = port.orientation*np.pi/180
        x,y = port.endpoints[0]*1/4 +  port.endpoints[1]*3/4 + np.array([np.cos(rad), np.sin(rad)])*port.width/8
#        x,y = port.midpoint[0], port.midpoint[1]
#        x,y  = x - qtext.boundingRect().width()/2, y - qtext.boundingRect().height()/2
        qtext.setPos(QPointF(x,y))
        qtext.setFlag(QGraphicsItem.ItemIgnoresTransformations)

        if not is_subport:
            [shape.setPen(self.portpen) for shape in port_shapes]
            qtext.setDefaultTextColor(self.portfontcolor)
            self.portitems += port_items
        else:
            [shape.setPen(self.subportpen) for shape in port_shapes]
            qtext.setDefaultTextColor(self.subportfontcolor)
            self.subportitems += port_items
#        self.portlabels.append(qtext) 

# 需要导入模块: from PyQt5 import QtCore [as 别名]
# 或者: from PyQt5.QtCore import QLineF [as 别名]
def __init__(self, parent):
        QtWidgets.QGraphicsItem.__init__(self, parent=parent)

        self.p1 = QtCore.QPointF()
        self.p2 = QtCore.QPointF()
        self.line = QtCore.QLineF(self.p1, self.p2)

        self.setOrientation(0., 0.)
        self.setZValue(10000) 

# 需要导入模块: from PyQt5 import QtCore [as 别名]
# 或者: from PyQt5.QtCore import QLineF [as 别名]
def paint(self, painter, option, widget):
        """
        Paints the path lines
        """
        painter.setRenderHint(QtGui.QPainter.Antialiasing)
        painter.setClipRect(option.exposedRect)

        color = globals.theme.color('path_connector')
        painter.setBrush(QtGui.QBrush(color))
        painter.setPen(QtGui.QPen(color, 3 * globals.TileWidth / 24, join=Qt.RoundJoin, cap=Qt.RoundCap))

        lines = []

        snl = self.nodelist
        mult = globals.TileWidth / 16
        for j, node in enumerate(snl):
            if ((j + 1) < len(snl)):
                a = QtCore.QPointF(float((snl[j]['x'] + 8) * mult) - self.x(), float((snl[j]['y'] + 8) * mult) - self.y())
                b = QtCore.QPointF(float((snl[j + 1]['x'] + 8) * mult) - self.x(), float((snl[j + 1]['y'] + 8) * mult) - self.y())
                lines.append(QtCore.QLineF(a, b))
            elif self.loops and (j + 1) == len(snl):
                a = QtCore.QPointF(float((snl[j]['x'] + 8) * mult) - self.x(), float((snl[j]['y'] + 8) * mult) - self.y())
                b = QtCore.QPointF(float((snl[0]['x'] + 8) * mult) - self.x(), float((snl[0]['y'] + 8) * mult) - self.y())
                lines.append(QtCore.QLineF(a, b))

        painter.drawLines(lines) 

# 需要导入模块: from PyQt5 import QtCore [as 别名]
# 或者: from PyQt5.QtCore import QLineF [as 别名]
def viewportEvent(self, viewportEvent):
        """
        Perform pinch to zoom feature to scale the viewport.
        :type viewportEvent: QTouchEvent
        """
        if viewportEvent.type() in {QtCore.QEvent.TouchBegin, QtCore.QEvent.TouchUpdate, QtCore.QEvent.TouchEnd}:

            if viewportEvent.type() in {QtCore.QEvent.TouchBegin, QtCore.QEvent.TouchEnd}:
                self.pinchFactor = 1.0

            pts = viewportEvent.touchPoints()
            if len(pts) == 2:
                p0 = pts[0]
                p1 = pts[1]
                p2 = midpoint(p0.pos(), p1.pos())
                pinchFactor = QtCore.QLineF(p0.pos(), p1.pos()).length() / QtCore.QLineF(p0.startPos(), p1.startPos()).length()
                pinchFactor = snapF(pinchFactor, DiagramView.PinchSize)
                if pinchFactor < DiagramView.PinchGuard[0] or pinchFactor > DiagramView.PinchGuard[1]:
                    if pinchFactor != self.pinchFactor:
                        zoom = self.zoom
                        zoom += +DiagramView.ZoomStep if pinchFactor > self.pinchFactor else -DiagramView.ZoomStep
                        zoom = clamp(zoom, DiagramView.ZoomMin, DiagramView.ZoomMax)
                        self.pinchFactor = pinchFactor
                        if zoom != self.zoom:
                            self.scaleViewOnPoint(zoom, p2.toPoint())

        return super().viewportEvent(viewportEvent)

    #############################################
    #   INTERFACE
    ################################# 

# 需要导入模块: from PyQt5 import QtCore [as 别名]
# 或者: from PyQt5.QtCore import QLineF [as 别名]
def breakPointAdd(self, mousePos):
        """
        Create a new breakpoint from the given mouse position returning its index.
        :type mousePos: QtCore.QPointF
        :rtype: int
        """
        index = 0
        point = None
        between = None
        shortest = 999

        source = self.source.anchor(self)
        target = self.target.anchor(self)
        points = [source] + self.breakpoints + [target]

        # Estimate between which breakpoints the new one is being added.
        for subpath in (QtCore.QLineF(points[i], points[i + 1]) for i in range(len(points) - 1)):
            dis, pos = projection(subpath, mousePos)
            if dis < shortest:
                point = pos
                shortest = dis
                between = subpath.p1(), subpath.p2()

        # If there is no breakpoint the new one will be appended.
        for i, breakpoint in enumerate(self.breakpoints):

            if breakpoint == between[1]:
                # In case the new breakpoint is being added between
                # the source node of this edge and the last breakpoint.
                index = i
                break

            if breakpoint == between[0]:
                # In case the new breakpoint is being added between
                # the last breakpoint and the target node of this edge.
                index = i + 1
                break

        self.session.undostack.push(CommandEdgeBreakpointAdd(self.diagram, self, index, point))
        return index 

# 需要导入模块: from PyQt5 import QtCore [as 别名]
# 或者: from PyQt5.QtCore import QLineF [as 别名]
def intersection(self, line):
        """
        Returns the intersection of the shape with the given line (in scene coordinates).
        :type line: QtCore.QLineF
        :rtype: QPointF
        """
        intersection = QtCore.QPointF()
        path = self.painterPath()
        polygon = self.mapToScene(path.toFillPolygon(self.transform()))
        for i in range(0, polygon.size() - 1):
            polyline = QtCore.QLineF(polygon[i], polygon[i + 1])
            if polyline.intersect(line, intersection) == QtCore.QLineF.BoundedIntersection:
                return intersection
        return None 

# 需要导入模块: from PyQt5 import QtCore [as 别名]
# 或者: from PyQt5.QtCore import QLineF [as 别名]
def test_intersection(self):
        self.assertEqual(QtCore.QPointF(0, 0), intersection(QtCore.QLineF(QtCore.QPointF(-1, 0), QtCore.QPointF(1, 0)), QtCore.QLineF(QtCore.QPointF(0, -1), QtCore.QPointF(0, 1))))
        self.assertEqual(QtCore.QPointF(-4, 0), intersection(QtCore.QLineF(QtCore.QPointF(-10, 0), QtCore.QPointF(10, 0)), QtCore.QLineF(QtCore.QPointF(-4, -12), QtCore.QPointF(-4, 14))))
        self.assertIsNone(intersection(QtCore.QLineF(QtCore.QPointF(-1, 0), QtCore.QPointF(1, 0)), QtCore.QLineF(QtCore.QPointF(-1, 2), QtCore.QPointF(1, 2)))) 

# 需要导入模块: from PyQt5 import QtCore [as 别名]
# 或者: from PyQt5.QtCore import QLineF [as 别名]
def paint_drop_indicator(self, painter):
        brush = QBrush(QColor(Qt.darkRed))
        pen = QPen(brush, 2, Qt.SolidLine)
        painter.setPen(pen)
        rect = self.boundingRect()

        if self.drop_indicator_position == QAbstractItemView.AboveItem:
            painter.drawLine(QLineF(rect.topLeft(), rect.topRight()))
        else:
            painter.drawLine(QLineF(rect.bottomLeft(), rect.bottomRight())) 

# 需要导入模块: from PyQt5 import QtCore [as 别名]
# 或者: from PyQt5.QtCore import QLineF [as 别名]
def paint_drop_indicator(self, painter):
        painter.setPen(QPen(Qt.darkRed, 2, Qt.SolidLine))
        painter.setBrush(Qt.NoBrush)
        rect = self.boundingRect()

        if self.drop_indicator_position == QAbstractItemView.AboveItem:
            painter.drawLine(QLineF(rect.topLeft(), rect.topRight()))
        elif self.drop_indicator_position == QAbstractItemView.OnItem:
            painter.drawRect(rect)
        else:
            painter.drawLine(QLineF(rect.bottomLeft(), rect.bottomRight())) 

# 需要导入模块: from PyQt5 import QtCore [as 别名]
# 或者: from PyQt5.QtCore import QLineF [as 别名]
def drawBackground(self, painter: QPainter, rect: QRectF):
        # freqs = np.fft.fftfreq(len(w), 1 / self.sample_rate)
        if self.draw_grid and len(self.frequencies) > 0:
            painter.setPen(QPen(painter.pen().color(), 0))
            parent_width = self.parent().width() if hasattr(self.parent(), "width") else 750
            view_rect = self.parent().view_rect() if hasattr(self.parent(), "view_rect") else rect

            font_width = self.font_metrics.width(Formatter.big_value_with_suffix(self.center_freq) + "   ")
            x_grid_size = int(view_rect.width() / parent_width * font_width)
            # x_grid_size = int(0.1 * view_rect.width()) if 0.1 * view_rect.width() > 1 else 1
            y_grid_size = 1
            x_mid = np.where(self.frequencies == 0)[0]
            x_mid = int(x_mid[0]) if len(x_mid) > 0 else 0

            left = int(rect.left()) - (int(rect.left()) % x_grid_size)
            left = left if left > 0 else 0

            top = rect.top() - (rect.top() % y_grid_size)
            bottom = rect.bottom() - (rect.bottom() % y_grid_size)
            right_border = int(rect.right()) if rect.right() < len(self.frequencies) else len(self.frequencies)

            x_range = list(range(x_mid, left, -x_grid_size)) + list(range(x_mid, right_border, x_grid_size))
            lines = [QLineF(x, rect.top(), x, bottom) for x in x_range] \
                    + [QLineF(rect.left(), y, rect.right(), y) for y in np.arange(top, bottom, y_grid_size)]

            painter.drawLines(lines)
            scale_x, scale_y = util.calc_x_y_scale(rect, self.parent())

            painter.scale(scale_x, scale_y)
            counter = -1  # Counter for Label for every second line

            for x in x_range:
                freq = self.frequencies[x]
                counter += 1

                if freq != 0 and (counter % 2 != 0): # Label for every second line
                    continue

                if freq != 0:
                    prefix = "+" if freq > 0 else ""
                    value = prefix+Formatter.big_value_with_suffix(freq, 2)
                else:
                    counter = 0
                    value = Formatter.big_value_with_suffix(self.center_freq)
                font_width = self.font_metrics.width(value)
                painter.drawText(QPointF(x / scale_x - font_width / 2, bottom / scale_y), value)