Python QtGui.QSpacerItem方法代码示例

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def initUI(self):
        grid = QtGui.QGridLayout()

        grid.addWidget(QtGui.QLabel(u'过滤规则:', parent=self), 0, 0, 1, 1)
        self.filter = QtGui.QLineEdit(parent=self)
        grid.addWidget(self.filter, 0, 1, 1, 1)
        # 创建ButtonBox，用户确定和取消
        buttonBox = QtGui.QDialogButtonBox(parent=self)
        buttonBox.setOrientation(QtCore.Qt.Horizontal) # 设置为水平方向
        buttonBox.setStandardButtons(QtGui.QDialogButtonBox.Cancel|QtGui.QDialogButtonBox.Ok) # 确定和取消两个按钮
        # 连接信号和槽
        buttonBox.accepted.connect(self.accept) # 确定
        buttonBox.rejected.connect(self.reject) # 取消
        # 垂直布局，布局表格及按钮
        layout = QtGui.QVBoxLayout()
        # 加入前面创建的表格布局
        layout.addLayout(grid)
        # 放一个间隔对象美化布局
        spacerItem = QtGui.QSpacerItem(20, 48, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
        layout.addItem(spacerItem)
        # ButtonBox
        layout.addWidget(buttonBox)
        self.setLayout(layout) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def setupUi(self, Dialog):
        Dialog.setObjectName(_fromUtf8("Dialog"))
        Dialog.resize(400, 300)
        self.verticalLayout = QtGui.QVBoxLayout(Dialog)
        self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
        self.textEdit = QtGui.QTextEdit(Dialog)
        self.textEdit.setReadOnly(True)
        self.textEdit.setObjectName(_fromUtf8("textEdit"))
        self.verticalLayout.addWidget(self.textEdit)
        self.horizontalLayout = QtGui.QHBoxLayout()
        self.horizontalLayout.setObjectName(_fromUtf8("horizontalLayout"))
        spacerItem = QtGui.QSpacerItem(40, 20, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
        self.horizontalLayout.addItem(spacerItem)
        self.ExitButton = QtGui.QPushButton(Dialog)
        self.ExitButton.setObjectName(_fromUtf8("ExitButton"))
        self.horizontalLayout.addWidget(self.ExitButton)
        spacerItem1 = QtGui.QSpacerItem(40, 20, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
        self.horizontalLayout.addItem(spacerItem1)
        self.verticalLayout.addLayout(self.horizontalLayout)

        self.retranslateUi(Dialog)
        QtCore.QMetaObject.connectSlotsByName(Dialog) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def setupView(self,Form):
        """Set up slots for views.
        
        The x- and y-values of higher dimensional datasets can be selected to
        be displayed in the 1d plot.

        Args:
            self: Object of the Ui_Form class.
            Form: PlotWindow object that inherits the used calls here from the
                underlying QWidget class.
        Returns:
            No return variable. The function operates on the given object.
        """
        sizePolicy = QtGui.QSizePolicy(QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Minimum)
        sizePolicy.setHorizontalStretch(0)
        sizePolicy.setVerticalStretch(0)
        self._addTraceSelectorIndicator(Form,sizePolicy,TraceSelector = "VTraceXSelector", 
                                        TraceIndicator="VTraceXValue", prefix = self.selector_labels[3]+': ')
        self._addTraceSelectorIndicator(Form,sizePolicy,TraceSelector = "VTraceYSelector", 
                                        TraceIndicator="VTraceYValue", prefix = self.selector_labels[4]+': ')        

        spacerItem = QtGui.QSpacerItem(40, 1, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
        self.horizontalLayout.addItem(spacerItem)
        
        self._addIndicatorLabels(Form,sizePolicy,indicators=["PointX","PointY"]) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def setupUi(self, ChangeLog):
        ChangeLog.setObjectName(_fromUtf8("ChangeLog"))
        ChangeLog.resize(714, 557)
        self.verticalLayout = QtGui.QVBoxLayout(ChangeLog)
        self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
        self.webView = QtWebKit.QWebView(ChangeLog)
        self.webView.setUrl(QtCore.QUrl(_fromUtf8("about:blank")))
        self.webView.setObjectName(_fromUtf8("webView"))
        self.verticalLayout.addWidget(self.webView)
        self.horizontalLayout = QtGui.QHBoxLayout()
        self.horizontalLayout.setObjectName(_fromUtf8("horizontalLayout"))
        self.buttonBox = QtGui.QDialogButtonBox(ChangeLog)
        self.buttonBox.setStandardButtons(QtGui.QDialogButtonBox.Ok)
        self.buttonBox.setObjectName(_fromUtf8("buttonBox"))
        self.horizontalLayout.addWidget(self.buttonBox)
        spacerItem = QtGui.QSpacerItem(600000, 20, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
        self.horizontalLayout.addItem(spacerItem)
        self.verticalLayout.addLayout(self.horizontalLayout)

        self.retranslateUi(ChangeLog)
        QtCore.QMetaObject.connectSlotsByName(ChangeLog) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def setupUi(self, Alert):
        Alert.setObjectName("Alert")
        Alert.resize(400, 93)
        self.verticalLayout = QtGui.QVBoxLayout(Alert)
        self.verticalLayout.setObjectName("verticalLayout")
        self.gridLayout = QtGui.QGridLayout()
        self.gridLayout.setObjectName("gridLayout")
        spacerItem = QtGui.QSpacerItem(40, 20, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
        self.gridLayout.addItem(spacerItem, 0, 0, 1, 1)
        self.label = QtGui.QLabel(Alert)
        self.label.setObjectName("label")
        self.gridLayout.addWidget(self.label, 0, 1, 1, 1)
        spacerItem1 = QtGui.QSpacerItem(40, 20, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
        self.gridLayout.addItem(spacerItem1, 0, 2, 1, 1)
        self.verticalLayout.addLayout(self.gridLayout)
        self.buttonBox = QtGui.QDialogButtonBox(Alert)
        self.buttonBox.setOrientation(QtCore.Qt.Horizontal)
        self.buttonBox.setStandardButtons(QtGui.QDialogButtonBox.Ok)
        self.buttonBox.setObjectName("buttonBox")
        self.verticalLayout.addWidget(self.buttonBox)

        self.retranslateUi(Alert)
        QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL("accepted()"), Alert.accept)
        QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL("rejected()"), Alert.reject)
        QtCore.QMetaObject.connectSlotsByName(Alert) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def setupUi(self, TrezorPassphraseDialog):
        TrezorPassphraseDialog.setObjectName(_fromUtf8("TrezorPassphraseDialog"))
        TrezorPassphraseDialog.resize(400, 133)
        self.verticalLayout = QtGui.QVBoxLayout(TrezorPassphraseDialog)
        self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
        self.label = QtGui.QLabel(TrezorPassphraseDialog)
        self.label.setObjectName(_fromUtf8("label"))
        self.verticalLayout.addWidget(self.label)
        self.passphraseEdit = QtGui.QLineEdit(TrezorPassphraseDialog)
        self.passphraseEdit.setEchoMode(QtGui.QLineEdit.Password)
        self.passphraseEdit.setObjectName(_fromUtf8("passphraseEdit"))
        self.verticalLayout.addWidget(self.passphraseEdit)
        spacerItem = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
        self.verticalLayout.addItem(spacerItem)
        self.buttonBox = QtGui.QDialogButtonBox(TrezorPassphraseDialog)
        self.buttonBox.setOrientation(QtCore.Qt.Horizontal)
        self.buttonBox.setStandardButtons(QtGui.QDialogButtonBox.Cancel|QtGui.QDialogButtonBox.Ok)
        self.buttonBox.setObjectName(_fromUtf8("buttonBox"))
        self.verticalLayout.addWidget(self.buttonBox)

        self.retranslateUi(TrezorPassphraseDialog)
        QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL(_fromUtf8("accepted()")), TrezorPassphraseDialog.accept)
        QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL(_fromUtf8("rejected()")), TrezorPassphraseDialog.reject)
        QtCore.QMetaObject.connectSlotsByName(TrezorPassphraseDialog) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def setupUi(self, AddGroupDialog):
        AddGroupDialog.setObjectName(_fromUtf8("AddGroupDialog"))
        AddGroupDialog.resize(415, 111)
        self.verticalLayout = QtGui.QVBoxLayout(AddGroupDialog)
        self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
        self.label = QtGui.QLabel(AddGroupDialog)
        self.label.setObjectName(_fromUtf8("label"))
        self.verticalLayout.addWidget(self.label)
        self.newGroupEdit = QtGui.QLineEdit(AddGroupDialog)
        self.newGroupEdit.setMaxLength(64)
        self.newGroupEdit.setObjectName(_fromUtf8("newGroupEdit"))
        self.verticalLayout.addWidget(self.newGroupEdit)
        spacerItem = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
        self.verticalLayout.addItem(spacerItem)
        self.buttonBox = QtGui.QDialogButtonBox(AddGroupDialog)
        self.buttonBox.setOrientation(QtCore.Qt.Horizontal)
        self.buttonBox.setStandardButtons(QtGui.QDialogButtonBox.Cancel|QtGui.QDialogButtonBox.Ok)
        self.buttonBox.setObjectName(_fromUtf8("buttonBox"))
        self.verticalLayout.addWidget(self.buttonBox)

        self.retranslateUi(AddGroupDialog)
        QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL(_fromUtf8("accepted()")), AddGroupDialog.accept)
        QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL(_fromUtf8("rejected()")), AddGroupDialog.reject)
        QtCore.QMetaObject.connectSlotsByName(AddGroupDialog) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def setupVector(self,Form):
        """Set up slots for value_vector.
        
        It is possible to plot the data over the x_axis and display the numeric
        values in a table.
        Args:
            self: Object of the Ui_Form class.
            Form: PlotWindow object that inherits the used calls here from the
                underlying QWidget class.
        Returns:
            No return variable. The function operates on the given object.
        """
        self.PlotTypeSelector = QtGui.QComboBox(Form)
        sizePolicy = QtGui.QSizePolicy(QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Minimum)
        sizePolicy.setHorizontalStretch(0)
        sizePolicy.setVerticalStretch(0)
        sizePolicy.setHeightForWidth(self.PlotTypeSelector.sizePolicy().hasHeightForWidth())
        self.PlotTypeSelector.setSizePolicy(sizePolicy)
        self.PlotTypeSelector.setObjectName(_fromUtf8("PlotTypeSelector"))
        self.PlotTypeSelector.addItem(_fromUtf8(""))
        self.PlotTypeSelector.addItem(_fromUtf8(""))
        self.horizontalLayout.addWidget(self.PlotTypeSelector)
        self.PlotTypeSelector.setItemText(0, _translate("Form", "Line Plot", None))
        self.PlotTypeSelector.setItemText(1, _translate("Form", "Table", None))
        
        spacerItem = QtGui.QSpacerItem(40, 1, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
        self.horizontalLayout.addItem(spacerItem)
        self._addIndicatorLabels(Form,sizePolicy,indicators=["PointX","PointY"]) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def setupUi(self, InfoWindow):
        InfoWindow.setObjectName(_fromUtf8("InfoWindow"))
        InfoWindow.resize(611, 396)
        self.verticalLayout = QtGui.QVBoxLayout(InfoWindow)
        self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
        self.infoLabel = QtGui.QLabel(InfoWindow)
        sizePolicy = QtGui.QSizePolicy(QtGui.QSizePolicy.Preferred, QtGui.QSizePolicy.Expanding)
        sizePolicy.setHorizontalStretch(0)
        sizePolicy.setVerticalStretch(0)
        sizePolicy.setHeightForWidth(self.infoLabel.sizePolicy().hasHeightForWidth())
        self.infoLabel.setSizePolicy(sizePolicy)
        self.infoLabel.setAlignment(QtCore.Qt.AlignCenter)
        self.infoLabel.setObjectName(_fromUtf8("infoLabel"))
        self.verticalLayout.addWidget(self.infoLabel)
        self.horizontalLayout = QtGui.QHBoxLayout()
        self.horizontalLayout.setObjectName(_fromUtf8("horizontalLayout"))
        spacerItem = QtGui.QSpacerItem(40, 20, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
        self.horizontalLayout.addItem(spacerItem)
        self.setInfoDumbButton = QtGui.QPushButton(InfoWindow)
        self.setInfoDumbButton.setObjectName(_fromUtf8("setInfoDumbButton"))
        self.horizontalLayout.addWidget(self.setInfoDumbButton)
        self.setInfoSmartButton = QtGui.QPushButton(InfoWindow)
        self.setInfoSmartButton.setObjectName(_fromUtf8("setInfoSmartButton"))
        self.horizontalLayout.addWidget(self.setInfoSmartButton)
        spacerItem1 = QtGui.QSpacerItem(40, 20, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
        self.horizontalLayout.addItem(spacerItem1)
        self.verticalLayout.addLayout(self.horizontalLayout)

        self.retranslateUi(InfoWindow)
        QtCore.QMetaObject.connectSlotsByName(InfoWindow) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def qui(self, ui_list_string, parentObject_string='', opt=''):
        # pre-defined user short name syntax
        type_dict = {
            'vbox': 'QVBoxLayout','hbox':'QHBoxLayout','grid':'QGridLayout', 'form':'QFormLayout',
            'split': 'QSplitter', 'grp':'QGroupBox', 'tab':'QTabWidget',
            'btn':'QPushButton', 'btnMsg':'QPushButton', 'label':'QLabel', 'input':'QLineEdit', 'check':'QCheckBox', 'choice':'QComboBox',
            'txtEdit': 'LNTextEdit', 'txt': 'QTextEdit',
            'tree': 'QTreeWidget', 'table': 'QTableWidget',
            'space': 'QSpacerItem', 
        }
        # get ui_list, creation or existing ui object
        ui_list = [x.strip() for x in ui_list_string.split('|')]
        for i in range(len(ui_list)):
            if ui_list[i] in self.uiList:
                # - exisiting object
                ui_list[i] = self.uiList[ui_list[i]]
            else:
                # - string creation: 
                # get part info
                partInfo = ui_list[i].split(';',1)
                uiName = partInfo[0].split('@')[0]
                uiType = uiName.rsplit('_',1)[-1]
                if uiType in type_dict:
                    uiType = type_dict[uiType]
                # set quickUI string format
                ui_list[i] = partInfo[0]+';'+uiType
                if len(partInfo)==1:
                    # give empty button and label a place holder name
                    if uiType in ('btn', 'btnMsg', 'QPushButton','label', 'QLabel'):
                        ui_list[i] = partInfo[0]+';'+uiType + ';'+uiName 
                elif len(partInfo)==2:
                    ui_list[i]=ui_list[i]+";"+partInfo[1]
        # get parentObject or exisiting object
        parentObject = parentObject_string
        if parentObject in self.uiList:
            parentObject = self.uiList[parentObject]
        # process quickUI
        self.quickUI(ui_list, parentObject, opt) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def qui(self, ui_list_string, parentObject_string='', opt=''):
        # pre-defined user short name syntax
        type_dict = {
            'vbox': 'QVBoxLayout','hbox':'QHBoxLayout','grid':'QGridLayout', 'form':'QFormLayout',
            'split': 'QSplitter', 'grp':'QGroupBox', 'tab':'QTabWidget',
            'btn':'QPushButton', 'btnMsg':'QPushButton', 'label':'QLabel', 'input':'QLineEdit', 'check':'QCheckBox', 'choice':'QComboBox',
            'txt': 'QTextEdit',
            'list': 'QListWidget', 'tree': 'QTreeWidget', 'table': 'QTableWidget',
            'space': 'QSpacerItem', 
        }
        # get ui_list, creation or existing ui object
        ui_list = [x.strip() for x in ui_list_string.split('|')]
        for i in range(len(ui_list)):
            if ui_list[i] in self.uiList:
                # - exisiting object
                ui_list[i] = self.uiList[ui_list[i]]
            else:
                # - string creation: 
                # get part info
                partInfo = ui_list[i].split(';',1)
                uiName = partInfo[0].split('@')[0]
                uiType = uiName.rsplit('_',1)[-1]
                if uiType in type_dict:
                    uiType = type_dict[uiType]
                # set quickUI string format
                ui_list[i] = partInfo[0]+';'+uiType
                if len(partInfo)==1:
                    # give empty button and label a place holder name
                    if uiType in ('btn', 'btnMsg', 'QPushButton','label', 'QLabel'):
                        ui_list[i] = partInfo[0]+';'+uiType + ';'+uiName 
                elif len(partInfo)==2:
                    ui_list[i]=ui_list[i]+";"+partInfo[1]
        # get parentObject or exisiting object
        parentObject = parentObject_string
        if parentObject in self.uiList:
            parentObject = self.uiList[parentObject]
        # process quickUI
        self.quickUI(ui_list, parentObject, opt) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def qui(self, ui_list_string, parentObject_string='', opt=''):
        # pre-defined user short name syntax
        type_dict = {
            'vbox': 'QVBoxLayout','hbox':'QHBoxLayout','grid':'QGridLayout', 'form':'QFormLayout',
            'split': 'QSplitter', 'grp':'QGroupBox', 'tab':'QTabWidget',
            'btn':'QPushButton', 'btnMsg':'QPushButton', 'label':'QLabel', 'input':'QLineEdit', 'check':'QCheckBox', 'choice':'QComboBox',
            'txtEdit': 'LNTextEdit', 'txt': 'QTextEdit',
            'tree': 'QTreeWidget',
            'space': 'QSpacerItem', 
        }
        # get ui_list, creation or existing ui object
        ui_list = [x.strip() for x in ui_list_string.split('|')]
        for i in range(len(ui_list)):
            if ui_list[i] in self.uiList:
                # - exisiting object
                ui_list[i] = self.uiList[ui_list[i]]
            else:
                # - string creation: 
                # get part info
                partInfo = ui_list[i].split(';',1)
                uiName = partInfo[0].split('@')[0]
                uiType = uiName.rsplit('_',1)[-1]
                if uiType in type_dict:
                    uiType = type_dict[uiType]
                # set quickUI string format
                ui_list[i] = partInfo[0]+';'+uiType
                if len(partInfo)==1:
                    # give empty button and label a place holder name
                    if uiType in ('btn', 'btnMsg', 'QPushButton','label', 'QLabel'):
                        ui_list[i] = partInfo[0]+';'+uiType + ';'+uiName 
                elif len(partInfo)==2:
                    ui_list[i]=ui_list[i]+";"+partInfo[1]
        # get parentObject or exisiting object
        parentObject = parentObject_string
        if parentObject in self.uiList:
            parentObject = self.uiList[parentObject]
        # process quickUI
        self.quickUI(ui_list, parentObject, opt) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def setupUi(self, Dialog):
        Dialog.setObjectName(_fromUtf8("Dialog"))
        Dialog.resize(478, 280)
        self.verticalLayout = QtGui.QVBoxLayout(Dialog)
        self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
        self.horizontalLayout = QtGui.QHBoxLayout()
        self.horizontalLayout.setObjectName(_fromUtf8("horizontalLayout"))
        self.listView = QtGui.QListView(Dialog)
        self.listView.setObjectName(_fromUtf8("listView"))
        self.horizontalLayout.addWidget(self.listView)
        self.verticalLayout_2 = QtGui.QVBoxLayout()
        self.verticalLayout_2.setObjectName(_fromUtf8("verticalLayout_2"))
        spacerItem = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
        self.verticalLayout_2.addItem(spacerItem)
        self.pushButton_2 = QtGui.QPushButton(Dialog)
        self.pushButton_2.setObjectName(_fromUtf8("pushButton_2"))
        self.verticalLayout_2.addWidget(self.pushButton_2)
        self.pushButton = QtGui.QPushButton(Dialog)
        self.pushButton.setObjectName(_fromUtf8("pushButton"))
        self.verticalLayout_2.addWidget(self.pushButton)
        spacerItem1 = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
        self.verticalLayout_2.addItem(spacerItem1)
        self.horizontalLayout.addLayout(self.verticalLayout_2)
        self.listView_2 = QtGui.QListView(Dialog)
        self.listView_2.setObjectName(_fromUtf8("listView_2"))
        self.horizontalLayout.addWidget(self.listView_2)
        self.verticalLayout.addLayout(self.horizontalLayout)
        self.buttonBox = QtGui.QDialogButtonBox(Dialog)
        self.buttonBox.setOrientation(QtCore.Qt.Horizontal)
        self.buttonBox.setStandardButtons(QtGui.QDialogButtonBox.Cancel|QtGui.QDialogButtonBox.Ok)
        self.buttonBox.setObjectName(_fromUtf8("buttonBox"))
        self.verticalLayout.addWidget(self.buttonBox)

        self.retranslateUi(Dialog)
        QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL(_fromUtf8("accepted()")), Dialog.accept)
        QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL(_fromUtf8("rejected()")), Dialog.reject)
        QtCore.QMetaObject.connectSlotsByName(Dialog) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def setupUi(self, Dialog):
        Dialog.setObjectName(_fromUtf8("Dialog"))
        Dialog.setWindowModality(QtCore.Qt.ApplicationModal)
        Dialog.resize(1304, 753)
        self.verticalLayout = QtGui.QVBoxLayout(Dialog)
        self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
        self.label = QtGui.QLabel(Dialog)
        self.label.setObjectName(_fromUtf8("label"))
        self.verticalLayout.addWidget(self.label)
        self.versions_treeView = QtGui.QTreeView(Dialog)
        self.versions_treeView.setObjectName(_fromUtf8("versions_treeView"))
        self.verticalLayout.addWidget(self.versions_treeView)
        self.horizontalWidget = QtGui.QWidget(Dialog)
        sizePolicy = QtGui.QSizePolicy(QtGui.QSizePolicy.Preferred, QtGui.QSizePolicy.Preferred)
        sizePolicy.setHorizontalStretch(0)
        sizePolicy.setVerticalStretch(0)
        sizePolicy.setHeightForWidth(self.horizontalWidget.sizePolicy().hasHeightForWidth())
        self.horizontalWidget.setSizePolicy(sizePolicy)
        self.horizontalWidget.setObjectName(_fromUtf8("horizontalWidget"))
        self.horizontalLayout = QtGui.QHBoxLayout(self.horizontalWidget)
        self.horizontalLayout.setMargin(0)
        self.horizontalLayout.setObjectName(_fromUtf8("horizontalLayout"))
        spacerItem = QtGui.QSpacerItem(40, 20, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
        self.horizontalLayout.addItem(spacerItem)
        self.selectNone_pushButton = QtGui.QPushButton(self.horizontalWidget)
        self.selectNone_pushButton.setObjectName(_fromUtf8("selectNone_pushButton"))
        self.horizontalLayout.addWidget(self.selectNone_pushButton)
        self.selectAll_pushButton = QtGui.QPushButton(self.horizontalWidget)
        self.selectAll_pushButton.setObjectName(_fromUtf8("selectAll_pushButton"))
        self.horizontalLayout.addWidget(self.selectAll_pushButton)
        self.update_pushButton = QtGui.QPushButton(self.horizontalWidget)
        self.update_pushButton.setObjectName(_fromUtf8("update_pushButton"))
        self.horizontalLayout.addWidget(self.update_pushButton)
        self.cancel_pushButton = QtGui.QPushButton(self.horizontalWidget)
        self.cancel_pushButton.setObjectName(_fromUtf8("cancel_pushButton"))
        self.horizontalLayout.addWidget(self.cancel_pushButton)
        self.verticalLayout.addWidget(self.horizontalWidget)

        self.retranslateUi(Dialog)
        QtCore.QMetaObject.connectSlotsByName(Dialog) 

# 需要导入模块: from PyQt4 import QtGui [as 别名]
# 或者: from PyQt4.QtGui import QSpacerItem [as 别名]
def setupUi(self, TableDataSourceEditor):
        TableDataSourceEditor.setObjectName(_fromUtf8("TableDataSourceEditor"))
        TableDataSourceEditor.resize(276, 298)
        self.gridLayout = QtGui.QGridLayout(TableDataSourceEditor)
        self.gridLayout.setVerticalSpacing(10)
        self.gridLayout.setObjectName(_fromUtf8("gridLayout"))
        self.vl_notification = QtGui.QVBoxLayout()
        self.vl_notification.setObjectName(_fromUtf8("vl_notification"))
        self.gridLayout.addLayout(self.vl_notification, 1, 0, 1, 2)
        self.label_4 = QtGui.QLabel(TableDataSourceEditor)
        self.label_4.setStyleSheet(_fromUtf8("padding: 2px; font-weight: bold; background-color: rgb(200, 200, 200);"))
        self.label_4.setObjectName(_fromUtf8("label_4"))
        self.gridLayout.addWidget(self.label_4, 0, 0, 1, 2)
        spacerItem = QtGui.QSpacerItem(20, 118, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
        self.gridLayout.addItem(spacerItem, 4, 1, 1, 1)
        self.ref_table = ReferencedTableEditor(TableDataSourceEditor)
        self.ref_table.setObjectName(_fromUtf8("ref_table"))
        self.gridLayout.addWidget(self.ref_table, 3, 0, 1, 2)
        self.label = QtGui.QLabel(TableDataSourceEditor)
        self.label.setMinimumSize(QtCore.QSize(0, 30))
        self.label.setScaledContents(False)
        self.label.setWordWrap(True)
        self.label.setObjectName(_fromUtf8("label"))
        self.gridLayout.addWidget(self.label, 2, 0, 1, 2)

        self.retranslateUi(TableDataSourceEditor)
        QtCore.QMetaObject.connectSlotsByName(TableDataSourceEditor)