Python piper.popen_sp函数代码示例

def psql_csv_run(sql_command, error_handler=None):
    """
    Runs psql and returns a CSVReader object from the query

    This CSVReader includes header names as the first record in all
    situations.  The output is fully buffered into Python.

    """
    csv_query = ('COPY ({query}) TO STDOUT WITH CSV HEADER;'
                 .format(query=sql_command))

    psql_proc = popen_sp([PSQL_BIN, '-p',os.getenv('WALE_PG_PORT'),'-d', 'postgres', '-c', csv_query],
                         stdout=subprocess.PIPE)
    stdout = psql_proc.communicate()[0]

    if psql_proc.returncode != 0:
        if error_handler is not None:
            error_handler(psql_proc)
        else:
            assert error_handler is None
            raise UserException(
                'could not csv-execute a query successfully via psql',
                'Query was "{query}".'.format(sql_command),
                'You may have to set some libpq environment '
                'variables if you are sure the server is running.')

    # Previous code must raise any desired exceptions for non-zero
    # exit codes
    assert psql_proc.returncode == 0

    # Fake enough iterator interface to get a CSV Reader object
    # that works.
    return csv.reader(iter(stdout.strip().split('\n')))

def do_lzo_aes_s3_put(s3_url, path, s3cmd_config_path):
    """
    Synchronous version of the s3-upload wrapper

    Nominally intended to be used through a pool, but exposed here
    for testing and experimentation.

    """
    with tempfile.NamedTemporaryFile(mode='w') as tf:
        compression_p = popen_sp([ENCODE_BIN,path], stdout=tf,
                                 bufsize=BUFSIZE_HT)
        compression_p.wait()

        if compression_p.returncode != 0:
            raise UserCritical(
                'could not properly compress heap file',
                'the heap file is at {path}'.format(path=path))

        # Not to be confused with fsync: the point is to make
        # sure any Python-buffered output is visible to other
        # processes, but *NOT* force a write to disk.
        tf.flush()

        check_call_wait_sigint([S3CMD_BIN, '-c', s3cmd_config_path,
                                'put', tf.name, s3_url + '.lzo.aes'])

    def start(self):
        if self._process is not None:
            raise StandardError(
                'BUG: Tried to .start on a PipelineCommand twice')

        self._process = popen_sp(self._command,
                                 stdin=self._stdin, stdout=self._stdout,
                                 bufsize=BUFSIZE_HT, close_fds=True)

    def start(self):
        if self._process is not None:
            raise UserCritical(
                'BUG: Tried to .start on a PipelineCommand twice')

        self._process = popen_sp(self._command,
                                 stdin=self._stdin, stdout=self._stdout,
                                 close_fds=True)

 def _read_controldata(self):
     controldata_proc = popen_sp([self._controldata_bin, self.data_directory], stdout=PIPE)
     stdout = controldata_proc.communicate()[0]
     controldata = {}
     for line in stdout.split("\n"):
         split_values = line.split(":")
         if len(split_values) == 2:
             key, val = split_values
             controldata[key.strip()] = val.strip()
     return controldata

def external_program_check(to_check=frozenset([PSQL_BIN, LZOP_BIN, PV_BIN])):
    """
    Validates the existence and basic working-ness of other programs

    Implemented because it is easy to get confusing error output when
    one does not install a dependency because of the fork-worker model
    that is both necessary for throughput and makes more obscure the
    cause of failures.  This is intended to be a time and frustration
    saving measure.  This problem has confused The Author in practice
    when switching rapidly between machines.

    """

    could_not_run = []
    error_msgs = []

    def psql_err_handler(popen):
        assert popen.returncode != 0
        error_msgs.append(
            textwrap.fill("Could not get a connection to the database: " "note that superuser access is required")
        )

        # Bogus error message that is re-caught and re-raised
        raise EnvironmentError("INTERNAL: Had problems running psql " "from external_program_check")

    with open(os.devnull, "wb") as nullf:
        for program in to_check:
            try:
                if program is PSQL_BIN:
                    psql_csv_run("SELECT 1", error_handler=psql_err_handler)
                else:
                    if program is PV_BIN:
                        extra_args = ["--quiet"]
                    else:
                        extra_args = []

                    proc = popen_sp([program] + extra_args, stdout=nullf, stderr=nullf, stdin=subprocess.PIPE)

                    # Close stdin for processes that default to
                    # reading from the pipe; the programs WAL-E uses
                    # of this kind will terminate in this case.
                    proc.stdin.close()
                    proc.wait()
            except EnvironmentError:
                could_not_run.append(program)

    if could_not_run:
        error_msgs.append("Could not run the following programs, are they installed? " + ", ".join(could_not_run))

    if error_msgs:
        raise UserException("could not run one or more external programs WAL-E depends upon", "\n".join(error_msgs))

    return None

def check_call_wait_sigint(*popenargs, **kwargs):
    got_sigint = False
    wait_sigint_proc = None

    try:
        wait_sigint_proc = popen_sp(*popenargs, **kwargs)
    except KeyboardInterrupt, e:
        got_sigint = True
        if wait_sigint_proc is not None:
            wait_sigint_proc.send_signal(signal.SIGINT)
            wait_sigint_proc.wait()
            raise e

 def __init__(self, data_directory):
     self.data_directory = data_directory
     pg_config_proc = popen_sp([CONFIG_BIN], stdout=PIPE)
     output = pg_config_proc.communicate()[0]
     for line in output.split("\n"):
         parts = line.split("=")
         if len(parts) != 2:
             continue
         key, val = [x.strip() for x in parts]
         if key == "BINDIR":
             self._controldata_bin = os.path.join(val, CONTROLDATA_BIN)
         elif key == "VERSION":
             self._pg_version = val

 def __init__(self, data_directory):
     self.data_directory = data_directory
     pg_config_proc = popen_sp([CONFIG_BIN],
                          stdout=PIPE)
     output = pg_config_proc.communicate()[0]
     for line in output.split('\n'):
         parts = line.split('=')
         if len(parts) != 2:
             continue
         key, val = map(lambda x: x.strip(), parts)
         if key == 'BINDIR':
             self._controldata_bin = os.path.join(val, CONTROLDATA_BIN)
         elif key == 'VERSION':
             self._pg_version = val

def do_lzop_s3_put(s3_url, local_path):
    """
    Compress and upload a given local path.

    :type s3_url: string
    :param s3_url: A s3://bucket/key style URL that is the destination

    :type local_path: string
    :param local_path: a path to a file to be compressed

    """

    assert not s3_url.endswith('.lzo')
    s3_url += '.lzo'

    with tempfile.NamedTemporaryFile(mode='rwb') as tf:
        compression_p = popen_sp([LZOP_BIN, '--stdout', local_path], stdout=tf,
                                 bufsize=BUFSIZE_HT)
        compression_p.wait()

        if compression_p.returncode != 0:
            raise UserCritical(
                'could not properly compress file',
                'the file is at {path}'.format(path=local_path))

        tf.flush()

        logger.info(msg='begin archiving a file',
                    detail=('Uploading "{local_path}" to "{s3_url}".'
                            .format(**locals())))

        clock_start = time.clock()
        k = uri_put_file(s3_url, tf)
        clock_finish = time.clock()

        kib_per_second = format_kib_per_second(clock_start, clock_finish,
                                               k.size)
        logger.info(
            msg='completed archiving to a file ',
            detail=('Archiving to "{s3_url}" complete at '
                    '{kib_per_second}KiB/s. ')
            .format(s3_url=s3_url, kib_per_second=kib_per_second))

def do_partition_put(backup_s3_prefix, tpart_number, tpart, rate_limit,
                     s3cmd_config_path):
    """
    Synchronous version of the s3-upload wrapper

    Nominally intended to be used through a pool, but exposed here
    for testing and experimentation.

    """
    with tempfile.NamedTemporaryFile(mode='w') as tf:
        compression_p = popen_sp([ENCODE_BIN],
                                 stdin=subprocess.PIPE, stdout=tf,
                                 bufsize=BUFSIZE_HT)
        tpart.tarfile_write(compression_p.stdin, rate_limit=rate_limit)
        compression_p.stdin.flush()
        compression_p.stdin.close()
        compression_p.wait()
        if compression_p.returncode != 0:
            raise UserCritical(
                'could not properly compress tar partition',
                'The partition failed is {tpart_number}.  '
                'It has the following manifest:\n  '
                '{error_manifest}'
                .format(error_manifest=tpart.format_manifest(),
                        tpart_number=tpart_number))

        # Not to be confused with fsync: the point is to make
        # sure any Python-buffered output is visible to other
        # processes, but *NOT* force a write to disk.
        tf.flush()

        check_call_wait_sigint(
            [S3CMD_BIN, '-c', s3cmd_config_path, 'put', tf.name,
             '/'.join([backup_s3_prefix, 'tar_partitions',
                       'part_{tpart_number}.tar.lzo.aes'.format(
                            tpart_number=tpart_number)])])

 def start(self, command, stdin, stdout):
     self._command = command
     self._process = popen_sp(command, stdin=stdin, stdout=stdout,
         bufsize=BUFSIZE_HT, close_fds=True)

def invoke_program():
    with open(os.devnull, 'w') as devnull:
        piper.popen_sp(['python', '--version'],
                       stdout=devnull, stderr=devnull)

    def database_s3_fetch(self, pg_cluster_dir, backup_name, pool_size):
        basebackups_prefix = '/'.join(
            [self.s3_prefix, 'basebackups_' + FILE_STRUCTURE_VERSION])

        with self.s3cmd_temp_config as s3cmd_config:

            # Verify sane looking input for backup_name
            if backup_name == 'LATEST':
                # "LATEST" is a special backup name that is always valid
                # to always find the lexically-largest backup, with the
                # intend of getting the freshest database as soon as
                # possible.

                backup_find = popen_sp(
                    [S3CMD_BIN, '-c', s3cmd_config.name,
                     'ls', basebackups_prefix + '/'],
                    stdout=subprocess.PIPE)
                stdout, stderr = backup_find.communicate()


                sentinel_suffix = '_backup_stop_sentinel.json'
                # Find sentinel files as markers of guaranteed good backups
                sentinel_urls = []

                for line in (l.strip() for l in stdout.split('\n')):

                    if line.endswith(sentinel_suffix):
                        sentinel_urls.append(line.split()[-1])

                if not sentinel_urls:
                    raise UserException(
                        'no base backups found',
                        'The prefix searched was "{0}"'
                        .format(basebackups_prefix),
                        'Consider checking to make sure that you have taken a '
                        'base backup and that the prefix is correct.  '
                        'New versions of WAL-E with new file formats will '
                        'fail to recognize old backups, too.')
                else:
                    sentinel_urls.sort()

                    # Slice away the extra URL cruft to locate just
                    # the base backup name.
                    #
                    # NB: '... + 1' is for trailing slash
                    begin_slice = len(basebackups_prefix) + 1
                    end_slice = -len(sentinel_suffix)
                    backup_name = sentinel_urls[-1][begin_slice:end_slice]

            base_backup_regexp = (r'base'
                                  r'_(?P<segment>[0-9a-zA-Z.]{0,60})'
                                  r'_(?P<position>[0-9A-F]{8})')
            match = re.match(base_backup_regexp, backup_name)
            if match is None:
                raise UserException('non-conformant backup name passed',
                                    'The invalid name was "{0}"'
                                    .format(backup_name))

            assert backup_name != 'LATEST', ('Must be rewritten to the actual '
                                             'name of the last base backup')


            backup_s3_prefix = '/'.join([basebackups_prefix, backup_name])
            backup_s3_cluster_prefix = '/'.join(
                [backup_s3_prefix, 'tar_partitions', ''])

            ls_proc = popen_sp(
                [S3CMD_BIN, '-c', s3cmd_config.name, 'ls',
                 backup_s3_cluster_prefix],
                stdout=subprocess.PIPE)
            stdout, stderr = ls_proc.communicate()

            pool = multiprocessing.Pool(processes=pool_size)
            results = []
            cluster_abspath = os.path.abspath(pg_cluster_dir)
            try:
                partitions = set()

                for line in stdout.split('\n'):
                    # Skip any blank lines
                    if not line.strip():
                        continue

                    pos = line.rfind('s3://')
                    if pos > 0:
                        s3_url = line[pos:]
                        assert s3_url.startswith(backup_s3_cluster_prefix)
                        base, partition_name = s3_url.rsplit('/', 1)
                        match = re.match(r'part_(\d+).tar.lzo.aes', partition_name)
                        if not match:
                            raise UserCritical(
                                'Malformed tar partition in base backup',
                                'The offensive line from s3cmd is ' + line)
                        else:
                            partition_number = int(match.group(1))
                            assert partition_number not in partitions, \
                                'Must not have duplicates'
                            partitions.add(partition_number)
                    else:
                        raise UserCritical(
#.........这里部分代码省略.........

def external_program_check(
    to_check=frozenset([PSQL_BIN, ENCODE_BIN, DECODE_BIN, S3CMD_BIN, MBUFFER_BIN])):
    """
    Validates the existence and basic working-ness of other programs

    Implemented because it is easy to get confusing error output when
    one does not install a dependency because of the fork-worker model
    that is both necessary for throughput and makes more obscure the
    cause of failures.  This is intended to be a time and frustration
    saving measure.  This problem has confused The Author in practice
    when switching rapidly between machines.

    """

    could_not_run = []
    error_msgs = []

    def psql_err_handler(popen):
        assert popen.returncode != 0
        error_msgs.append(textwrap.fill(
                'Could not get a connection to the database: '
                'note that superuser access is required'))

        # Bogus error message that is re-caught and re-raised
        raise Exception('INTERNAL: Had problems running psql '
                        'from external_program_check')

    with open(os.devnull, 'w') as nullf:
        for program in to_check:
            try:
                if program is PSQL_BIN:
                    psql_csv_run('SELECT 1', error_handler=psql_err_handler)
                else:
                    if program is MBUFFER_BIN:
                        # Prevent noise on the TTY, as mbuffer writes
                        # text there: suppressing stdout/stderr
                        # doesn't seem to work.
                        extra_args = ['-q']
                    else:
                        extra_args = []

                    proc = popen_sp([program] + extra_args, stdout=nullf, stderr=nullf,
                                    stdin=subprocess.PIPE)

                    # Close stdin for processes that default to
                    # reading from the pipe; the programs WAL-E uses
                    # of this kind will terminate in this case.
                    proc.stdin.close()
                    proc.wait()
            except EnvironmentError:
                could_not_run.append(program)

    if could_not_run:
        error_msgs.append(
                'Could not run the following programs, are they installed? ' +
                ', '.join(could_not_run))


    if error_msgs:
        raise UserException(
            'could not run one or more external programs WAL-E depends upon',
            '\n'.join(error_msgs))

    return None