Python vbrif_portmap.validate_vbrif_at_controller函数代码示例

def update_vbr_flowfilter_drop():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print 'TEST 8 : VBR->FLOWFILTER TEST: Create Three VBR and VbrFlowFilterEntry with vbrone update the VbrFlowFilterEntry to vbrthree'
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)


  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOneDrop', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation at Controller Failed"
    exit(1)


  retval=flowfilter.update_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOneDrop', 'UpdateFlowfilterOneDrop')
  if retval != 0:
    print "VBRFlowFilterEntry Update Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst','UpdateFlowfilterOneDrop', presence='yes', position=0)
  if retval != 0:
    print "VBRFlowFilterEntry Updatation Validate Failed at Co-ordinator"
    exit(1)
#.........这里部分代码省略.........

def negative_vbr_flowfilter():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)
  print "Negative test scenario test cases"
  print 'TEST 3 : VBR->FLOWFILTER TEST: Create Three VBR and VbrFlowFilterEntry with vbrone negative  the VbrFlowFilterEntry to vbrthree'
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "VBRFlowFilterEntry Validation at Co-ordinator Failed "
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation at Controller Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrThree', 'VbrIfThree')
#.........这里部分代码省略.........

def test_vbr_flowfilter_pass():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)
  print "action type create pass"
  print "TEST 5 : VBR->FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)


  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOnePass', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation at Controller Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilterEntry deletete Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilter deletete Failed"
    exit(1)

#.........这里部分代码省略.........

def update_vbrif_flowfilter_pass_audit():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 4 : VBRIF->Update AUDIT FLOWFILTER DROP TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  print "****UPDATE Controller IP to invalid****"
  test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
  retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
  if retval != 0:
    print "controller invalid_ip update failed"
    exit(1)
  # Delay for AUDIT
  retval = controller.wait_until_state('ControllerFirst',"down")
  if retval != 0:
    print "controller state change failed"
    exit(1)



  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOnePass')
  if retval != 0:
#.........这里部分代码省略.........

def test_vbr_flowfilter_audit_1():

    print "****CREATE Controller with valid IP****"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)

    print """TEST 1 : create VTN and VBR FLOWFILTER when controller is down
             change the controller status to up trigger Audit and validate"""
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    print "****Create VTN****"
    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    print "****Create VBR****"
    retval = vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
    if retval != 0:
      print "VTN Create Failed"
      exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
    if retval != 0:
      print "VBRIF Create Failed"
      exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
    if retval != 0:
      print "VBR Validate Failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
    if retval != 0:
      print "After Create VBRIF Validate Failed"
      exit(1)

    retval=flowlistentry.create_flowlist('FlowlistOne')
    if retval != 0:
        print "FlowList Create Failed"
        exit(1)

    retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
    if retval != 0:
        print "FlowlistEntry Create Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
        print "controller invalid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
    if retval != 0:
        print "VBRFlowFilter Create Failed"
        exit(1)

    retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
    if retval != 0:
        print "VBRFlowFilterEntry Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
#.........这里部分代码省略.........

def test_vtn_mininet_ping_demo1():

    print """TEST 1 : One vtn and one VBridge with Two Interfaces one Portmap each
    send packets between two configured host(H1,H3)"""
    print "CREATE Controller"
    print "VTNONE->VBRONE->VBRIFONE->PORTMAP"
    print "VTNONE->VBRONE->VBRIFTWO->PORTMAP"

    child = create_mininet_topology('MININETONE', 'ControllerFirst', '2')
    if child.isalive() == True :
        print "Topology creation Success!!!"
    else:
        print "Topology creation Failed"
        close_topology(child)
        exit(1)

    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 1 :Controller Create Failed"
        close_topology(child)
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfOne')
    if retval != 0:
        print "VBRIFONE Create Failed"
        close_topology(child)
        exit(1)
    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst', position=0)
    if retval != 0:
        print "VBRIFONE Validate Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
    if retval != 0:
        print "VBRIFTWO Create Failed"
        close_topology(child)
        exit(1)
    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', position=1)
    if retval != 0:
        print "VBRIFTWO Validate Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'VbrIfOne', vlan_tagged=0);
    if retval != 0:
        print "VBRIF1 Portmap Create Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'VbrIfTwo', vlan_tagged=0);
    if retval != 0:
        print "VBRIF2 Portmap Create Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst', presence="yes");
    if retval != 0:
        print "VBRIF1 Portmap Validate Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', presence="yes");
    if retval != 0:
        print "VBRIF2 Portmap Validate Failed"
        close_topology(child)
        exit(1)

    retval = ping_mininet (child,'h1','h3')
    if retval != 0:
        print "MININET PING FAILED"

    close_topology(child)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        close_topology(child)
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
#.........这里部分代码省略.........

def test_multi_ctr_mininet_ping():
    child = create_multicontroller_mininet_topology('MININETONE')
    if child.isalive() == True :
        print "Topology creation Success!!!"
    else:
        print "Topology creation Failed"
        mininet_test.mininet_test.close_topology(child)
        exit(1)

    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        mininet_test.close_topology(child)
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        mininet_test.close_topology(child)
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = create_boundary('BOUNDARY', 'ControllerFirst', 'ControllerSecond')
    if retval != 0:
        print "Boundary  Create Failed"
        mininet_test.close_topology(child)
        exit(1)
    retval = validate_boundary('BOUNDARY', presence="yes", position=0)
    if retval != 0:
        print "Boundary  Validate  Failed after create"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrTwo', 'ControllerSecond')
    if retval != 0:
        print "VBRTWO Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne')
    if retval != 0:
        print "VBRIFONE Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', position=0)
    if retval != 0:
        print "VBRIFONE Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
    if retval != 0:
        print "VBRIFONE Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', position=1)
    if retval != 0:
        print "VBRIFTWO Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', vlan_tagged=0);
    if retval != 0:
        print "VBRIF1 Portmap Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', presence="yes");
    if retval != 0:
        print "VBRIF1 Portmap Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree')
    if retval != 0:
        print "VBRIFTHREE Create Failed"
        mininet_test.close_topology(child)
#.........这里部分代码省略.........

def test_audit_vtn_vbr_multi_vbrif_portmap():
    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 6 :Controller Create Failed"
        exit(1)

    print "TEST 6 : VTenant with one VBridge Two VBRIF1/VBRIF2 and One PORTMAP in VBRIF1"
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF1 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfTwo')
    if retval != 0:
        print "VBRIF2 Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',position=0)
    if retval != 0:
        print "After Create VBRIF1 Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfTwo','ControllerFirst',position=1)
    if retval != 0:
        print "After Create VBRIF2 Validate Failed"
        exit(1)

    retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "VBRIF1 Portmap Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes",position=0);
    if retval != 0:
        print "VBRIF1 Portmap Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
     print "controller invalid_ip update failed"
     exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.delete_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "Portmap Delete Failed"
        exit(1)

    retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfTwo');
    if retval != 0:
        print "VBRIF2 Portmap Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
     print "controller valid_ip update failed"
     exit(1)
   # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfTwo','ControllerFirst',presence="yes",position=0);
    if retval != 0:
        print "VBRIF2 Portmap Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',position=0)
    if retval != 0:
        print "After Create VBR1 Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
#.........这里部分代码省略.........

def test_vtermif_flowfilter_drop_audit():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 5 : VTERMIF->AUDIT FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval = vtn_vterm.create_vterm('VtnOne','VTermOne','ControllerFirst')
  if retval != 0:
    print "VTERM Create Failed"
    exit(1)

  retval = vtermif_portmap.create_vtermif('VtnOne','VTermOne','VTermIfOne')
  if retval != 0:
    print "VTERMIF Create Failed"
    exit(1)
    retval=flowlistentry.create_flowlist('FlowlistOne')

  retval = vtermif_portmap.create_portmap('VtnOne','VTermOne','VTermIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VTERMFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VTERMFlowFilterEntry Create Failed"
    exit(1)
  print "****UPDATE Controller IP to invalid****"
#.........这里部分代码省略.........

def test_audit_vtn_vbr_vbrif_portmap():

    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 4 :Controller Create Failed"
        exit(1)

    print "TEST 4 : Test Audit with VTenant one VBridge one VBRIF and One PORTMAP"
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)
    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
     print "controller invalid_ip update failed"
     exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "Portmap Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
     print "controller valid_ip update failed"
     exit(1)
   # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes");
    if retval != 0:
        print "Portmap Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval=vbrif_portmap.delete_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "Portmap Delete Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no");
    if retval != 0:
        print "After Delete Portmap Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF Delete Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no",position=0)
    if retval != 0:
        print "After Delete VBRIF Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
#.........这里部分代码省略.........

def test_audit_vtn_multi_vbr_vbrif():
    print "CREATE Controller"
    print "VTNONE->VBRONE->VBRIFONE/VBRIFTHREE"
    print "VTNONE->VBRTWO->VBRIFTWO/VBRIFFOUR"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        exit(1)

    print "TEST 3 : Audit One vtn and Two VBridges with Two Interfaces each"
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
    if retval != 0:
        print "VBR2 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF1 Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',position=0)
    if retval != 0:
        print "VBRIF1 Validate Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfOne')
    if retval != 0:
        print "VBR2->VBRIF1 Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfOne','ControllerFirst',position=0)
    if retval != 0:
        print "VBR2->VBRIF2 Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
     print "controller invalid_ip update failed"
     exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBR1->VBRIF1 Delete Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrTwo','VbrIfOne')
    if retval != 0:
        print "VBR2->VBRIF1 Delete Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfThree')
    if retval != 0:
        print "VBRIF3 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
    if retval != 0:
        print "VBR2->VBRIF2 Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
     print "controller valid_ip update failed"
     exit(1)
   # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfThree','ControllerFirst',position=0)
    if retval != 0:
        print "VBRIF3 Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst',position=0)
#.........这里部分代码省略.........

def update_vbr_flowlist():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print 'TEST 3 : VBR->FLOWLISTTEST:Update the VbrFlowListEntry'
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)
  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)
  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)
  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)
  retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes");
  if retval != 0:
     print "Portmap Validate Failed"
     exit(1)

  retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst',presence="yes");
  if retval != 0:
     print "Portmap Validate Failed"
     exit(1)
  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence="yes", position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)


  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

#.........这里部分代码省略.........

def negative_vbrif_flowfilter_out():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 1 : VBRIF->Negative test scenario FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VBR Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut', presence='yes', position=0)
  if retval != 0:
    print "VBRFlowFilterEntry Validation at Co-ordinator Failed "
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne|VbrIfOne', 'ControllerFirst', 'FlowfilterOneOut', presence='yes', position=0)
#.........这里部分代码省略.........

def test_vtermif_flowfilter_1():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 2 : VTERMIF->FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrThree','VbrIfThree')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrThree','VbrIfThree');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval = vtn_vterm.create_vterm('VtnOne','VTermOne','ControllerFirst')
  if retval != 0:
    print "VTERM Create Failed"
    exit(1)

  retval = vtermif_portmap.create_vtermif('VtnOne','VTermOne','VTermIfOne')
  if retval != 0:
    print "VTERMIF Create Failed"
    exit(1)
    retval=flowlistentry.create_flowlist('FlowlistOne')

  retval = vtermif_portmap.create_portmap('VtnOne','VTermOne','VTermIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

#.........这里部分代码省略.........