Python DebugLog.debug_print_level1方法代码示例

本文整理汇总了Python中utils.DebugLog.debug_print_level1方法的典型用法代码示例。如果您正苦于以下问题：Python DebugLog.debug_print_level1方法的具体用法？Python DebugLog.debug_print_level1怎么用？Python DebugLog.debug_print_level1使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类utils.DebugLog的用法示例。

在下文中一共展示了DebugLog.debug_print_level1方法的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Python代码示例。

示例1: get_asm_poweron_status

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
 def get_asm_poweron_status(self, server_id):
     DebugLog.debug_print_level1("in server controller get_vios_installation_status")
     server_data = self.getServerData(server_id)
     
     params = [server_data[IP_FOR_NIMINSTALL]]
     msg = self.msg_coder.encodeMsg(CMDMsg.getCMD(CHECKASM_POWERON), server_data[IDX_ID], params)  #"UPDATE_PASSWD"
     self._sendMsg2CommCnt(msg)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:9，代码来源:SvrController.py

示例2: process_message

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
 def process_message(self, msg):
     DebugLog.debug_print_level1("Got the command tranfering in hmc engine")
     cmd, _server_id, data = self.msg_decoder.decodeMsg(msg)
     if CMDMsg.getCMD(SERVERSCAN) == cmd:
         self.server_scan()
     elif CMDMsg.getCMD(UPDATEPASSWD) == cmd:
         self.update_password(_server_id, data)
     elif CMDMsg.getCMD(CHECKUPDATEPASSWD) == cmd:
         self.check_UpdatePassword_Status(_server_id, data)
     elif CMDMsg.getCMD(REMVSERVER) == cmd:
         self.remove_server_from_hmc(_server_id, data)
     elif CMDMsg.getCMD(POWEROFFSERVER) == cmd:
         self.poweroffserver(_server_id, data)
     elif CMDMsg.getCMD(CHECKPOWEROFFSERVER) == cmd:
         self.check_poweroff_status(_server_id, data)        
     elif CMDMsg.getCMD(GETSTATUS) == cmd:
         self.getstatus()
     elif CMDMsg.getCMD(RECOVERPROFILE) == cmd:
         self.recover_server_profile(_server_id, data)
     #CHECKRECOVERPROFILE
     elif CMDMsg.getCMD(CHECKRECOVERPROFILE) == cmd:
         self.check_recover_profile_status(_server_id, data)
     elif CMDMsg.getCMD(POWERONSERVER) == cmd:
         self.poweronserver(_server_id, data)
     elif CMDMsg.getCMD(CHECKPOWERONSERVER) == cmd:
         self.check_poweron_status(_server_id, data)
     elif CMDMsg.getCMD(CREATEVIOSLPAR) == cmd:
         self.createvioslpar(_server_id, data)
     elif CMDMsg.getCMD(INSTALLVIOS) == cmd:
         self.install_vios(_server_id, data)
     elif CMDMsg.getCMD(CHECKCREATEVIOSLPAR) == cmd:
         _server_name, _server_sn = eval(data)
         self.check_if_create_vios_lpar_state(_server_id, 
                                              _server_name, 
                                              _server_sn)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:37，代码来源:hmceng.py

示例3: check_if_create_vios_lpar_state

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
    def check_if_create_vios_lpar_state(self, server_id, server_name, server_sn):
        '''
        '''
        hmc_cli = HMC_CLI(self.hmc_ip, self.hmc_passwd)
        ret = hmc_cli.check_if_create_vios_lpar_finished(server_name,
                                                         server_sn)
        
        resp_state = None
        
        count = 1
#         while not ret:
#             
        if ret:
            resp_state = [StateBase.get_state_const(CREATEVIOSLPAR_STAT), 
                          StateBase.get_state_progress_const_name(PRGRS_FINISHED)]
        else:
            resp_state = [StateBase.get_state_const(CREATEVIOSLPAR_STAT), 
                          StateBase.get_state_progress_const_name(PRGRS_INPROGRESS)]
            #count = (count + 1) % 4 

        msg = self.msg_decoder.encodeMsg(CMDMsg.getCMD(CHECKCREATEVIOSLPAR),
                                         server_id, 
                                         resp_state)
            
        DebugLog.debug_print_level1(msg)
        self.vd_comm_cnt.postMessage(msg)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:28，代码来源:hmceng.py

示例4: check_recover_profile_status

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
    def check_recover_profile_status(self, _server_id, data):
        hmc_cli = HMC_CLI(self.hmc_ip, self.hmc_passwd)
        data = eval(data)
        _server_name = data[0]
        status_ret = hmc_cli.get_server_status(_server_name)
        
        recoverprofile_check_status_list = [
                               StateBase.get_state_const(POWEROFF_STAT),
                               StateBase.get_state_const(OPERATING_STAT),
                               StateBase.get_state_const(STANDBY_STAT),
                               ]
        
        recover_profile_finished = False
        if status_ret[0] in recoverprofile_check_status_list:
            recover_profile_finished = True
        
        if recover_profile_finished:
            resp_state = [StateBase.get_state_const(RECOVERPROFILE_STAT), 
                          StateBase.get_state_progress_const_name(PRGRS_FINISHED)]
        else:
            resp_state = [StateBase.get_state_const(RECOVERPROFILE_STAT), 
                          StateBase.get_state_progress_const_name(PRGRS_INPROGRESS)]
            #count = (count + 1) % 4 

        msg = self.msg_decoder.encodeMsg(CMDMsg.getCMD(RECOVERPROFILE),
                                         _server_id, 
                                         resp_state)
            
        DebugLog.debug_print_level1(msg)
        self.vd_comm_cnt.postMessage(msg)
        
        if recover_profile_finished:
            self.get_server_hmc_status(_server_id, _server_name)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:35，代码来源:hmceng.py

示例5: check_poweroff_status

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
    def check_poweroff_status(self, server_id, data):
        hmc_cli = HMC_CLI(self.hmc_ip, self.hmc_passwd)
        data = eval(data)
        _server_name = data[0]
        status_ret = hmc_cli.get_server_status(_server_name)
        
        poweroff_status_list = [StateBase.get_state_const(POWEROFF_STAT),
                               ]
        
        poweroff_val = False
        if status_ret[0] in poweroff_status_list:
            poweroff_val = True
        
        if poweroff_val:
            resp_state = [StateBase.get_state_const(POWEROFFSERVER_STAT), 
                          StateBase.get_state_progress_const_name(PRGRS_FINISHED)]
        else:
            resp_state = [StateBase.get_state_const(POWEROFFSERVER_STAT), 
                          StateBase.get_state_progress_const_name(PRGRS_INPROGRESS)]

        msg = self.msg_decoder.encodeMsg(CMDMsg.getCMD(POWEROFFSERVER),
                                         server_id, 
                                         resp_state)
            
        DebugLog.debug_print_level1(msg)
        self.vd_comm_cnt.postMessage(msg)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:28，代码来源:hmceng.py

示例6: check_nim_resource_clean

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
 def check_nim_resource_clean(self, server_id):
     DebugLog.debug_print_level1("in server controller check_nim_resource_clean")
     server_data = self.getServerData(server_id)
     
     params = [server_data[SN_ID]]
     msg = self.msg_coder.encodeMsg(CMDMsg.getCMD(CHECKCLEANSTATUS), server_data[IDX_ID], params)
     self._sendMsg2CommCnt(msg)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:9，代码来源:SvrController.py

示例7: check_poweron_status

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
    def check_poweron_status(self, server_id, data):
        hmc_cli = HMC_CLI(self.hmc_ip, self.hmc_passwd)
        data = eval(data)
        _server_name = data[0]
        status_ret = hmc_cli.get_server_status(_server_name)
        
        poweron_status_list = [StateBase.get_state_const(PASSWORD_REQUIRED_STAT),
                               StateBase.get_state_const(FAILED_AUTH_STAT),
                               StateBase.get_state_const(UPDATEPASSWD_STAT),
                               StateBase.get_state_const(RECOVERY_STAT),
                               StateBase.get_state_const(OPERATING_STAT),
                               StateBase.get_state_const(STANDBY_STAT),
                               ]
        
        poweron_val = False
        if status_ret[0] in poweron_status_list:
            poweron_val = True
        
        if poweron_val:
            resp_state = [StateBase.get_state_const(POWERONSERVER_STAT), 
                          StateBase.get_state_progress_const_name(PRGRS_FINISHED)]
        else:
            resp_state = [StateBase.get_state_const(POWERONSERVER_STAT), 
                          StateBase.get_state_progress_const_name(PRGRS_INPROGRESS)]

        msg = self.msg_decoder.encodeMsg(CMDMsg.getCMD(POWERONSERVER),
                                         server_id, 
                                         resp_state)
            
        DebugLog.debug_print_level1(msg)
        self.vd_comm_cnt.postMessage(msg)

        if poweron_val:
            self.get_server_hmc_status(server_id, _server_name)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:36，代码来源:hmceng.py

示例8: check_server_in_fsm_manager

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
 def check_server_in_fsm_manager(self):
     for server_manager_indx in range(len(self.fsm_manager)):
         phase, state = self.dataentity.get_data_status_key(server_manager_indx)
         fsm_manager = self.fsm_manager[server_manager_indx]
         DebugLog.debug_print_level1('state name : %s' % state)
         #if not fsm_manager.inprogress:
         fsm_manager.setTaskState(phase, state, first=True)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:9，代码来源:SvrController.py

示例9: updateData

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
 def updateData(self, msg):
     DebugLog.debug_print_level1("in updateData function in controller")
     self.dataentity.savedata(msg)
     _cmd_key, _server_id, data = self.msg_coder.decodeMsg(msg)
     if CMDMsg.getCMD(UPDATEPASSWD) == _cmd_key:
         self.b_server_removed_frm_hmc_flg = True
     self.setServerTaskState(_cmd_key, _server_id, data)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:9，代码来源:SvrController.py

示例10: get_lpar_current_status

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
 def get_lpar_current_status(self, server_id):
     DebugLog.debug_print_level1("in server controller get_lpar_current_status")
     server_data = self.getServerData(server_id)
     
     params = [server_data[NAME_ID], server_data[SN_ID]]
     msg = self.msg_coder.encodeMsg(CMDMsg.getCMD(CHECKCREATEVIOSLPAR), server_data[IDX_ID], params)  #"UPDATE_PASSWD"
     self._sendMsg2CommCnt(msg)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:9，代码来源:SvrController.py

示例11: get_nimserver_hosts_current_status

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
 def get_nimserver_hosts_current_status(self, server_id):
     DebugLog.debug_print_level1("in server controller get_lpar_current_status")
     server_data = self.getServerData(server_id)
     
     params = [server_data[IP_FOR_NIMINSTALL], server_data[SN_ID]]
     msg = self.msg_coder.encodeMsg(CMDMsg.getCMD(CHECKHOSTSFILE), server_data[IDX_ID], params)  #"UPDATE_PASSWD"
     self._sendMsg2CommCnt(msg)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:9，代码来源:SvrController.py

示例12: get_nimserver_assigned_resource_status

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
 def get_nimserver_assigned_resource_status(self, server_id):
     DebugLog.debug_print_level1("in server controller get_nimserver_assigned_resource_status")
     server_data = self.getServerData(server_id)
     
     params = [server_data[SN_ID]]
     msg = self.msg_coder.encodeMsg(CMDMsg.getCMD(CHECKASSIGNEDRESOURCE), server_data[IDX_ID], params)  #"UPDATE_PASSWD"
     self._sendMsg2CommCnt(msg)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:9，代码来源:SvrController.py

示例13: nimserver_define_nim_host

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
    def nimserver_define_nim_host(self, server_id):
        DebugLog.debug_print_level1("in server controller createvioslpar")
#         ckecked_items_id_list = self.getCheckedItemsIdList()
#         for item_id in range(len(ckecked_items_id_list)):
        server_data = self.getServerData(server_id)
        params = [server_data[SN_ID]]
        msg = self.msg_coder.encodeMsg(CMDMsg.getCMD(DEFINESERVER), server_data[IDX_ID], params)  #"POWERON"
        self._sendMsg2CommCnt(msg)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:10，代码来源:SvrController.py

示例14: get_server_poweron_status

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
    def get_server_poweron_status(self, server_id):
        '''get current status'''
        DebugLog.debug_print_level1("in server controller get_server_poweron_status")

        server_data = self.getServerData(server_id)
        params = [server_data[NAME_ID]]
        msg = self.msg_coder.encodeMsg(CMDMsg.getCMD(CHECKPOWERONSERVER), server_data[IDX_ID], params)  #"GET_STATUS"
        self._sendMsg2CommCnt(msg)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:10，代码来源:SvrController.py

示例15: get_update_password_status

# 需要导入模块: from utils import DebugLog [as 别名]
# 或者: from utils.DebugLog import debug_print_level1 [as 别名]
 def get_update_password_status(self, server_id):
     '''
     check update password status
     ''' 
     DebugLog.debug_print_level1("in server controller get_update_password_status")
     server_data = self.getServerData(server_id)
     params = [server_data[SN_ID]]
     msg = self.msg_coder.encodeMsg(CMDMsg.getCMD(CHECKUPDATEPASSWD), server_data[IDX_ID], params)  #"GET_STATUS"
     self._sendMsg2CommCnt(msg)

开发者ID:xhan-shannon，项目名称:SystemControlView，代码行数:11，代码来源:SvrController.py

注：本文中的utils.DebugLog.debug_print_level1方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。