Python profile.getProfileSetting函数代码示例

    def __init__(
        self,
        parent,
        profileSetting,
        bitmapFilenameOn,
        bitmapFilenameOff,
        helpText="",
        id=-1,
        callback=None,
        size=(20, 20),
    ):
        self.bitmapOn = getBitmapImage(bitmapFilenameOn)
        self.bitmapOff = getBitmapImage(bitmapFilenameOff)

        super(ToggleButton, self).__init__(parent, id, self.bitmapOff, size=size)

        self.callback = callback
        self.profileSetting = profileSetting
        self.helpText = helpText

        self.SetBezelWidth(1)
        self.SetUseFocusIndicator(False)

        if self.profileSetting != "":
            self.SetValue(profile.getProfileSetting(self.profileSetting) == "True")
            self.Bind(wx.EVT_BUTTON, self.OnButtonProfile)
        else:
            self.Bind(wx.EVT_BUTTON, self.OnButton)

        self.Bind(wx.EVT_ENTER_WINDOW, self.OnMouseEnter)
        self.Bind(wx.EVT_LEAVE_WINDOW, self.OnMouseLeave)

        parent.AddControl(self)

 def updateProfileToControls(self):
     "Update the configuration wx controls to show the new configuration settings"
     for setting in self.settingControlList:
         if setting.type == "profile":
             setting.SetValue(profile.getProfileSetting(setting.configName))
         else:
             setting.SetValue(profile.getPreference(setting.configName))

	def _doAutoPlace(self, allowedSizeY):
		extraSizeMin = self.headSizeMin
		extraSizeMax = self.headSizeMax
		if profile.getProfileSettingFloat('skirt_line_count') > 0:
			skirtSize = profile.getProfileSettingFloat('skirt_line_count') * profile.calculateEdgeWidth() + profile.getProfileSettingFloat('skirt_gap')
			extraSizeMin = extraSizeMin + util3d.Vector3(skirtSize, skirtSize, 0)
			extraSizeMax = extraSizeMax + util3d.Vector3(skirtSize, skirtSize, 0)
		if profile.getProfileSetting('support') != 'None':
			extraSizeMin = extraSizeMin + util3d.Vector3(3.0, 0, 0)
			extraSizeMax = extraSizeMax + util3d.Vector3(3.0, 0, 0)
		
		if self.printMode == 1:
			extraSizeMin = util3d.Vector3(6.0, 6.0, 0)
			extraSizeMax = util3d.Vector3(6.0, 6.0, 0)

		if extraSizeMin.x > extraSizeMax.x:
			posX = self.machineSize.x
			dirX = -1
		else:
			posX = 0
			dirX = 1
		posY = 0
		dirY = 1
		
		minX = self.machineSize.x
		minY = self.machineSize.y
		maxX = 0
		maxY = 0
		for item in self.list:
			item.centerX = posX + item.getMaximum().x * item.scale * dirX
			item.centerY = posY + item.getMaximum().y * item.scale * dirY
			if item.centerY + item.getSize().y >= allowedSizeY:
				if dirX < 0:
					posX = minX - extraSizeMax.x - 1
				else:
					posX = maxX + extraSizeMin.x + 1
				posY = 0
				item.centerX = posX + item.getMaximum().x * item.scale * dirX
				item.centerY = posY + item.getMaximum().y * item.scale * dirY
			posY += item.getSize().y  * item.scale * dirY + extraSizeMin.y + 1
			minX = min(minX, item.centerX - item.getSize().x * item.scale / 2)
			minY = min(minY, item.centerY - item.getSize().y * item.scale / 2)
			maxX = max(maxX, item.centerX + item.getSize().x * item.scale / 2)
			maxY = max(maxY, item.centerY + item.getSize().y * item.scale / 2)
		
		for item in self.list:
			if dirX < 0:
				item.centerX -= minX / 2
			else:
				item.centerX += (self.machineSize.x - maxX) / 2
			item.centerY += (self.machineSize.y - maxY) / 2
		
		if minX < 0 or maxX > self.machineSize.x:
			return ((maxX - minX) + (maxY - minY)) * 100
		
		return (maxX - minX) + (maxY - minY)

	def getExtraHeadSize(self):
		extraSizeMin = self.headSizeMin
		extraSizeMax = self.headSizeMax
		if profile.getProfileSettingFloat('skirt_line_count') > 0:
			skirtSize = profile.getProfileSettingFloat('skirt_line_count') * profile.calculateEdgeWidth() + profile.getProfileSettingFloat('skirt_gap')
			extraSizeMin = extraSizeMin + numpy.array([skirtSize, skirtSize, 0])
			extraSizeMax = extraSizeMax + numpy.array([skirtSize, skirtSize, 0])
		if profile.getProfileSetting('enable_raft') != 'False':
			raftSize = profile.getProfileSettingFloat('raft_margin') * 2
			extraSizeMin = extraSizeMin + numpy.array([raftSize, raftSize, 0])
			extraSizeMax = extraSizeMax + numpy.array([raftSize, raftSize, 0])
		if profile.getProfileSetting('support') != 'None':
			extraSizeMin = extraSizeMin + numpy.array([3.0, 0, 0])
			extraSizeMax = extraSizeMax + numpy.array([3.0, 0, 0])

		if self.printMode == 1:
			extraSizeMin = numpy.array([6.0, 6.0, 0])
			extraSizeMax = numpy.array([6.0, 6.0, 0])
		
		return extraSizeMin, extraSizeMax

	def updateModelTransform(self, f=0):
		if len(self.objectList) < 1 or self.objectList[0].mesh == None:
			return
		
		rotate = profile.getProfileSettingFloat('model_rotate_base')
		mirrorX = profile.getProfileSetting('flip_x') == 'True'
		mirrorY = profile.getProfileSetting('flip_y') == 'True'
		mirrorZ = profile.getProfileSetting('flip_z') == 'True'
		swapXZ = profile.getProfileSetting('swap_xz') == 'True'
		swapYZ = profile.getProfileSetting('swap_yz') == 'True'

		for obj in self.objectList:
			if obj.mesh == None:
				continue
			obj.mesh.setRotateMirror(rotate, mirrorX, mirrorY, mirrorZ, swapXZ, swapYZ)
		
		minV = self.objectList[0].mesh.getMinimum()
		maxV = self.objectList[0].mesh.getMaximum()
		for obj in self.objectList:
			if obj.mesh == None:
				continue

			obj.mesh.getMinimumZ()
			minV = numpy.minimum(minV, obj.mesh.getMinimum())
			maxV = numpy.maximum(maxV, obj.mesh.getMaximum())

		self.objectsMaxV = maxV
		self.objectsMinV = minV
		for obj in self.objectList:
			if obj.mesh == None:
				continue

			obj.mesh.vertexes -= numpy.array([minV[0] + (maxV[0] - minV[0]) / 2, minV[1] + (maxV[1] - minV[1]) / 2, minV[2]])
			#for v in obj.mesh.vertexes:
			#	v[2] -= minV[2]
			#	v[0] -= minV[0] + (maxV[0] - minV[0]) / 2
			#	v[1] -= minV[1] + (maxV[1] - minV[1]) / 2
			obj.mesh.getMinimumZ()
			obj.dirty = True
		self.glCanvas.Refresh()

	def updateModelTransform(self, f=0):
		if len(self.objectList) < 1 or self.objectList[0].mesh == None:
			return
		
		rotate = profile.getProfileSettingFloat('model_rotate_base')
		mirrorX = profile.getProfileSetting('flip_x') == 'True'
		mirrorY = profile.getProfileSetting('flip_y') == 'True'
		mirrorZ = profile.getProfileSetting('flip_z') == 'True'
		swapXZ = profile.getProfileSetting('swap_xz') == 'True'
		swapYZ = profile.getProfileSetting('swap_yz') == 'True'

		for obj in self.objectList:
			if obj.mesh == None:
				continue
			obj.mesh.setRotateMirror(rotate, mirrorX, mirrorY, mirrorZ, swapXZ, swapYZ)
		
		minV = self.objectList[0].mesh.getMinimum()
		maxV = self.objectList[0].mesh.getMaximum()
		for obj in self.objectList:
			if obj.mesh == None:
				continue

			obj.mesh.getMinimumZ()
			minV = minV.min(obj.mesh.getMinimum())
			maxV = maxV.max(obj.mesh.getMaximum())

		self.objectsMaxV = maxV
		self.objectsMinV = minV
		for obj in self.objectList:
			if obj.mesh == None:
				continue

			for v in obj.mesh.vertexes:
				v.z -= minV.z
				v.x -= minV.x + (maxV.x - minV.x) / 2
				v.y -= minV.y + (maxV.y - minV.y) / 2
			obj.mesh.getMinimumZ()
			obj.dirty = True
		self.glCanvas.Refresh()

	def updateProfileToControls(self):
		self.scale.SetValue(profile.getProfileSetting('model_scale'))
		self.rotate.SetValue(profile.getProfileSettingFloat('model_rotate_base'))
		self.mirrorX.SetValue(profile.getProfileSetting('flip_x') == 'True')
		self.mirrorY.SetValue(profile.getProfileSetting('flip_y') == 'True')
		self.mirrorZ.SetValue(profile.getProfileSetting('flip_z') == 'True')
		self.swapXZ.SetValue(profile.getProfileSetting('swap_xz') == 'True')
		self.swapYZ.SetValue(profile.getProfileSetting('swap_yz') == 'True')
		self.updateModelTransform()

	def __init__(self, parent):
		super(UltimakerCalibrationPage, self).__init__(parent, "Ultimaker Calibration")
		
		self.AddText("Your Ultimaker requires some calibration.")
		self.AddText("This calibration is needed for a proper extrusion amount.")
		self.AddSeperator()
		self.AddText("The following values are needed:")
		self.AddText("* Diameter of filament")
		self.AddText("* Number of steps per mm of filament extrusion")
		self.AddSeperator()
		self.AddText("The better you have calibrated these values, the better your prints\nwill become.")
		self.AddSeperator()
		self.AddText("First we need the diameter of your filament:")
		self.filamentDiameter = self.AddTextCtrl(profile.getProfileSetting('filament_diameter'))
		self.AddText("If you do not own digital Calipers that can measure\nat least 2 digits then use 2.89mm.\nWhich is the average diameter of most filament.")
		self.AddText("Note: This value can be changed later at any time.")

 def StoreData(self):
     if self.UltimakerRadio.GetValue():
         profile.putPreference("machine_width", "205")
         profile.putPreference("machine_depth", "205")
         profile.putPreference("machine_height", "200")
         profile.putProfileSetting("nozzle_size", "0.4")
         profile.putProfileSetting("machine_center_x", "100")
         profile.putProfileSetting("machine_center_y", "100")
     else:
         profile.putPreference("machine_width", "80")
         profile.putPreference("machine_depth", "80")
         profile.putPreference("machine_height", "60")
         profile.putProfileSetting("nozzle_size", "0.5")
         profile.putProfileSetting("machine_center_x", "40")
         profile.putProfileSetting("machine_center_y", "40")
     profile.putProfileSetting("wall_thickness", float(profile.getProfileSetting("nozzle_size")) * 2)

	def StoreData(self):
		if self.UltimakerRadio.GetValue():
			profile.putPreference('machine_width', '205')
			profile.putPreference('machine_depth', '205')
			profile.putPreference('machine_height', '200')
			profile.putProfileSetting('nozzle_size', '0.4')
			profile.putProfileSetting('machine_center_x', '100')
			profile.putProfileSetting('machine_center_y', '100')
		else:
			profile.putPreference('machine_width', '80')
			profile.putPreference('machine_depth', '80')
			profile.putPreference('machine_height', '60')
			profile.putProfileSetting('nozzle_size', '0.5')
			profile.putProfileSetting('machine_center_x', '40')
			profile.putProfileSetting('machine_center_y', '40')
		profile.putProfileSetting('wall_thickness', float(profile.getProfileSetting('nozzle_size')) * 2)

def raftLayerCount(setting):
	if profile.getProfileSetting('enable_raft') == "True":
		return '1'
	return '0'

def ifSettingIs(name, value):
	return lambda setting: profile.getProfileSetting(name) == value

def storedSettingInvertBoolean(name):
	return lambda setting: profile.getProfileSetting(name) == "False"

def storedSetting(name):
	return lambda setting: profile.getProfileSetting(name)

	def __init__(self, parent):
		super(previewPanel, self).__init__(parent,-1)
		
		self.SetBackgroundColour(wx.SystemSettings.GetColour(wx.SYS_COLOUR_3DDKSHADOW))
		self.SetMinSize((440,320))
		
		self.objectList = []
		self.errorList = []
		self.gcode = None
		self.objectsMinV = None
		self.objectsMaxV = None
		self.loadThread = None
		self.machineSize = util3d.Vector3(profile.getPreferenceFloat('machine_width'), profile.getPreferenceFloat('machine_depth'), profile.getPreferenceFloat('machine_height'))
		self.machineCenter = util3d.Vector3(float(profile.getProfileSetting('machine_center_x')), float(profile.getProfileSetting('machine_center_y')), 0)

		self.glCanvas = PreviewGLCanvas(self)
		#Create the popup window
		self.warningPopup = wx.PopupWindow(self, flags=wx.BORDER_SIMPLE)
		self.warningPopup.SetBackgroundColour(wx.SystemSettings.GetColour(wx.SYS_COLOUR_INFOBK))
		self.warningPopup.text = wx.StaticText(self.warningPopup, -1, 'Reset scale, rotation and mirror?')
		self.warningPopup.yesButton = wx.Button(self.warningPopup, -1, 'yes', style=wx.BU_EXACTFIT)
		self.warningPopup.noButton = wx.Button(self.warningPopup, -1, 'no', style=wx.BU_EXACTFIT)
		self.warningPopup.sizer = wx.BoxSizer(wx.HORIZONTAL)
		self.warningPopup.SetSizer(self.warningPopup.sizer)
		self.warningPopup.sizer.Add(self.warningPopup.text, 1, flag=wx.ALL|wx.ALIGN_CENTER_VERTICAL, border=1)
		self.warningPopup.sizer.Add(self.warningPopup.yesButton, 0, flag=wx.EXPAND|wx.ALL, border=1)
		self.warningPopup.sizer.Add(self.warningPopup.noButton, 0, flag=wx.EXPAND|wx.ALL, border=1)
		self.warningPopup.Fit()
		self.warningPopup.Layout()
		self.warningPopup.timer = wx.Timer(self)
		self.Bind(wx.EVT_TIMER, self.OnHideWarning, self.warningPopup.timer)
		
		self.Bind(wx.EVT_BUTTON, self.OnResetAll, self.warningPopup.yesButton)
		self.Bind(wx.EVT_BUTTON, self.OnHideWarning, self.warningPopup.noButton)
		parent.Bind(wx.EVT_MOVE, self.OnMove)
		parent.Bind(wx.EVT_SIZE, self.OnMove)
		
		self.toolbar = toolbarUtil.Toolbar(self)

		group = []
		toolbarUtil.RadioButton(self.toolbar, group, 'object-3d-on.png', 'object-3d-off.png', '3D view', callback=self.On3DClick)
		toolbarUtil.RadioButton(self.toolbar, group, 'object-top-on.png', 'object-top-off.png', 'Topdown view', callback=self.OnTopClick)
		self.toolbar.AddSeparator()

		self.showBorderButton = toolbarUtil.ToggleButton(self.toolbar, '', 'view-border-on.png', 'view-border-off.png', 'Show model borders', callback=self.OnViewChange)
		self.toolbar.AddSeparator()

		group = []
		self.normalViewButton = toolbarUtil.RadioButton(self.toolbar, group, 'view-normal-on.png', 'view-normal-off.png', 'Normal model view', callback=self.OnViewChange)
		self.transparentViewButton = toolbarUtil.RadioButton(self.toolbar, group, 'view-transparent-on.png', 'view-transparent-off.png', 'Transparent model view', callback=self.OnViewChange)
		self.xrayViewButton = toolbarUtil.RadioButton(self.toolbar, group, 'view-xray-on.png', 'view-xray-off.png', 'X-Ray view', callback=self.OnViewChange)
		self.gcodeViewButton = toolbarUtil.RadioButton(self.toolbar, group, 'view-gcode-on.png', 'view-gcode-off.png', 'GCode view', callback=self.OnViewChange)
		self.mixedViewButton = toolbarUtil.RadioButton(self.toolbar, group, 'view-mixed-on.png', 'view-mixed-off.png', 'Mixed model/GCode view', callback=self.OnViewChange)
		self.toolbar.AddSeparator()

		self.layerSpin = wx.SpinCtrl(self.toolbar, -1, '', size=(21*4,21), style=wx.SP_ARROW_KEYS)
		self.toolbar.AddControl(self.layerSpin)
		self.Bind(wx.EVT_SPINCTRL, self.OnLayerNrChange, self.layerSpin)

		self.toolbar2 = toolbarUtil.Toolbar(self)

		# Mirror
		self.mirrorX = toolbarUtil.ToggleButton(self.toolbar2, 'flip_x', 'object-mirror-x-on.png', 'object-mirror-x-off.png', 'Mirror X', callback=self.updateModelTransform)
		self.mirrorY = toolbarUtil.ToggleButton(self.toolbar2, 'flip_y', 'object-mirror-y-on.png', 'object-mirror-y-off.png', 'Mirror Y', callback=self.updateModelTransform)
		self.mirrorZ = toolbarUtil.ToggleButton(self.toolbar2, 'flip_z', 'object-mirror-z-on.png', 'object-mirror-z-off.png', 'Mirror Z', callback=self.updateModelTransform)
		self.toolbar2.AddSeparator()

		# Swap
		self.swapXZ = toolbarUtil.ToggleButton(self.toolbar2, 'swap_xz', 'object-swap-xz-on.png', 'object-swap-xz-off.png', 'Swap XZ', callback=self.updateModelTransform)
		self.swapYZ = toolbarUtil.ToggleButton(self.toolbar2, 'swap_yz', 'object-swap-yz-on.png', 'object-swap-yz-off.png', 'Swap YZ', callback=self.updateModelTransform)
		self.toolbar2.AddSeparator()

		# Scale
		self.scaleReset = toolbarUtil.NormalButton(self.toolbar2, self.OnScaleReset, 'object-scale.png', 'Reset model scale')
		self.scale = wx.TextCtrl(self.toolbar2, -1, profile.getProfileSetting('model_scale'), size=(21*2,21))
		self.toolbar2.AddControl(self.scale)
		self.scale.Bind(wx.EVT_TEXT, self.OnScale)
		self.scaleMax = toolbarUtil.NormalButton(self.toolbar2, self.OnScaleMax, 'object-max-size.png', 'Scale object to fit machine size')

		self.toolbar2.AddSeparator()

		# Multiply
		#self.mulXadd = toolbarUtil.NormalButton(self.toolbar2, self.OnMulXAddClick, 'object-mul-x-add.png', 'Increase number of models on X axis')
		#self.mulXsub = toolbarUtil.NormalButton(self.toolbar2, self.OnMulXSubClick, 'object-mul-x-sub.png', 'Decrease number of models on X axis')
		#self.mulYadd = toolbarUtil.NormalButton(self.toolbar2, self.OnMulYAddClick, 'object-mul-y-add.png', 'Increase number of models on Y axis')
		#self.mulYsub = toolbarUtil.NormalButton(self.toolbar2, self.OnMulYSubClick, 'object-mul-y-sub.png', 'Decrease number of models on Y axis')
		#self.toolbar2.AddSeparator()

		# Rotate
		self.rotateReset = toolbarUtil.NormalButton(self.toolbar2, self.OnRotateReset, 'object-rotate.png', 'Reset model rotation')
		self.rotate = wx.SpinCtrl(self.toolbar2, -1, profile.getProfileSetting('model_rotate_base'), size=(21*3,21), style=wx.SP_WRAP|wx.SP_ARROW_KEYS)
		self.rotate.SetRange(0, 360)
		self.rotate.Bind(wx.EVT_TEXT, self.OnRotate)
		self.toolbar2.AddControl(self.rotate)

		self.toolbar2.Realize()
		self.OnViewChange()
		
		sizer = wx.BoxSizer(wx.VERTICAL)
		sizer.Add(self.toolbar, 0, flag=wx.EXPAND|wx.TOP|wx.LEFT|wx.RIGHT, border=1)
#.........这里部分代码省略.........