Python traci.init函数代码示例

def run():
    global current_hour
    """execute the TraCI control loop"""
    traci.init(PORT)

    src = [
        Source("D2",100,1),
        Source("D2",100,2),
        Source("D2",100,3),
        Source("L16",100,51),
        Source("L14",50,25),
        Source("V4",0,30)
        ]
    dest = [
            Destination("V4",150),
            Destination("V4",100),
            Destination("D8",5),
            Destination("V4",150),
            Destination("D1",10),
            Destination("D1",20)
            ]
    stops = [
            ChargingStation(0,"D6",50,2,10,[0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5])
            ,
            ChargingStation(1,"V2",50,2,8,[0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5,0.5])
            ]            
    types = ["CarA", "CarA", "CarD", "CarB", "CarC", "CarC"]

    #number of elechtric vehicle insterted
    veh_count = 0
    vehicles = []
    temp_vehs = []
    for i in range(6):
        vehicles.append(Electric_Vehicle(veh_count,src[i],dest[i],types[i],1000,temp_vehs))
        veh_count+=1

    center = Center(stops,vehicles)
    for s in stops:
        center.seller_report(s)

    temp_toDel = False
    while vehicles != []:
        traci.simulationStep()
        if traci.simulation.getCurrentTime()/1000 % 1000 == 0 and traci.simulation.getCurrentTime()>0:
            current_hour += 1
            print '[HOUR]', current_hour
        deleteTempVehicles(temp_vehs)        
        for v in vehicles:
            if (v.updateState(dest) == 1 and not v.reported):
                center.buyer_report(v,stops,current_hour,temp_vehs)
                center.assign(v,stops)
                v.assinged = v.stopToCharge()
                v.reported = True
            if (v.toDel):
                vehicles.remove(v)
            if v.reported and not v.assinged:
                v.assinged = v.stopToCharge()
        
    traci.close()
    sys.stdout.flush()

def run():
    """execute the TraCI control loop"""
    traci.init(PORT)
    programPointer = len(PROGRAM) - 1
    step = 0
    while traci.simulation.getMinExpectedNumber() > 0:
        traci.simulationStep()
        programPointer = min(programPointer + 1, len(PROGRAM) - 1)
        numPriorityVehicles = traci.inductionloop.getLastStepVehicleNumber("0")
        if numPriorityVehicles > 0:
            if programPointer == len(PROGRAM) - 1:
                # we are in the WEGREEN phase. start the priority phase
                # sequence
                programPointer = 0
            elif PROGRAM[programPointer] != WEYELLOW:
                # horizontal traffic is already stopped. restart priority phase
                # sequence at green
                programPointer = 3
            else:
                # we are in the WEYELLOW phase. continue sequence
                pass
        traci.trafficlights.setRedYellowGreenState(
            "0", PROGRAM[programPointer])
        step += 1
    traci.close()
    sys.stdout.flush()

def run():
    create_simulation_scenario()
    if mode == "train":
        for i in range(200):
            if random.uniform(0, 1) > 0.5:
                accident_cars.add("veh" + str(i))

    client_socket = socket.socket()
    client_socket.connect(('127.0.0.1', 9999))
    traci.init(PORT)
    step = 0

    client_socket.send(scenario + "," + mode + "," + time + "\n")
    message = client_socket.recv(1024).splitlines()[0]
    print message

    cars_in_perimeter = set()
    while traci.simulation.getMinExpectedNumber() > 0:
        manage_car_set(cars_in_perimeter)
        send_data_to_rsu(client_socket, cars_in_perimeter)
        traci.simulationStep()
        step += 1
        if mode == "run":
            sleep(0.2)
    traci.close()
    client_socket.close()

def initTraciConnection(traciPort, maxRetry):
    """
    Initializes TraCI on the specified port
    """
    sleep = 1
    step = 0
    traciInit = False
    Logger.info("{}Initializing TraCI on port {}...".format(constants.PRINT_PREFIX_MANAGER, traciPort))
    while not(traciInit) and step < maxRetry:
        try:
            traci.init(traciPort)
            traciInit = True
        except:
            Logger.info("{}Traci initialization on port {} failed. Retrying connection in {} seconds...".format(constants.PRINT_PREFIX_MANAGER, traciPort, sleep))
            time.sleep(sleep)
            if sleep >= 4:
                sleep = 5
            else:
                sleep *= 2
            step += 1
            
    if not(traciInit):
        Logger.error("{}Traci initialization on port {} failed. Shutting down SUMO Manager".format(constants.PRINT_PREFIX_MANAGER, traciPort))
        sys.stdout.flush()
        sys.exit(0)
        
    Logger.info("{}Initialized".format(constants.PRINT_PREFIX_MANAGER))

def run():
    """execute the TraCI control loop"""
    traci.init(PORT)

    # track the duration for which the green phase of the vehicles has been
    # active
    greenTimeSoFar = 0

    # whether the pedestrian button has been pressed
    activeRequest = False

    # main loop. do something every simulation step until no more vehicles are
    # loaded or running
    while traci.simulation.getMinExpectedNumber() > 0:
        traci.simulationStep()

        # decide wether there is a waiting pedestrian and switch if the green
        # phase for the vehicles exceeds its minimum duration
        if not activeRequest:
            activeRequest = checkWaitingPersons()
        if traci.trafficlights.getPhase(TLSID) == VEHICLE_GREEN_PHASE:
            greenTimeSoFar += 1
            if greenTimeSoFar > MIN_GREEN_TIME:
                # check whether someone has pushed the button

                if activeRequest:
                    # switch to the next phase
                    traci.trafficlights.setPhase(
                        TLSID, VEHICLE_GREEN_PHASE + 1)
                    # reset state
                    activeRequest = False
                    greenTimeSoFar = 0

    sys.stdout.flush()
    traci.close()

    def beginEvaluate(self):
        """
        Given the parameters during initialization, we run the simulator to get the fitness
        using port num to identify a connection
        """
        traci.init(self.portNum, 10, "localhost", str(self.portNum))
        #traverse all the traffic lights
        for i in xrange(len(self.trafficLightIdList)):
            #traverse all the traffic lights
            tlsLogicList = traci.trafficlights.getCompleteRedYellowGreenDefinition(self.trafficLightIdList[i])
            #One traffic light has only one phase list now
            tlsLogicList = tlsLogicList[0]
            #each traffic light has several phases
            phaseList = []
            #traverse all the phase
            for j in xrange(len(tlsLogicList._phases)):
#                 print self.individual.genes[i].times[j]
                phaseList.append(traci.trafficlights.Phase(self.individual.genes[i].times[j], self.individual.genes[i].times[j], self.individual.genes[i].times[j], tlsLogicList._phases[j]._phaseDef))
            tlsLogicList._phases = phaseList
            traci.trafficlights.setCompleteRedYellowGreenDefinition(self.trafficLightIdList[i], tlsLogicList)

        totalNumPassed = 0
        for _ in xrange(600):
            traci.simulationStep()
            totalNumPassed = totalNumPassed + traci.simulation.getArrivedNumber()
        traci.close()
        self.fitness = totalNumPassed
        return totalNumPassed 

def init(manager, forTest=False):
    optParser = OptionParser()
    optParser.add_option("-v", "--verbose", action="store_true", dest="verbose",
                         default=False, help="tell me what you are doing")
    optParser.add_option("-g", "--gui", action="store_true", dest="gui",
                         default=False, help="run with GUI")
    optParser.add_option("-c", "--cyber", action="store_true", dest="cyber",
                         default=False, help="use small cybercars instead of big busses")
    optParser.add_option("-d", "--demand", type="int", dest="demand",
                         default=15, help="period with which the persons are emitted")
    optParser.add_option("-b", "--break", type="int", dest="breakstep", metavar="TIMESTEP",
                         help="let a vehicle break for %s seconds at TIMESTEP" % BREAK_DELAY)
    (options, args) = optParser.parse_args()
    sumoExe = SUMO
    if options.gui:
        sumoExe = SUMOGUI
    sumoConfig = "%s%02i.sumocfg" % (PREFIX, options.demand)
    if options.cyber:
        sumoConfig = "%s%02i_cyber.sumocfg" % (PREFIX, options.demand)
    sumoProcess = subprocess.Popen([sumoExe, sumoConfig], stdout=sys.stdout, stderr=sys.stderr)
    traci.init(PORT)
    traci.simulation.subscribe()
    setting.manager = manager
    setting.verbose = options.verbose
    setting.cyber = options.cyber
    setting.breakstep = options.breakstep
    try:
        while setting.step < 100 or statistics.personsRunning > 0:
            doStep()
        statistics.evaluate(forTest)
    finally:
        traci.close()
        sumoProcess.wait()

def main(args):
    sumoBinary = sumolib.checkBinary('sumo')
    sumo_call = [sumoBinary, "-c", "data/hello.sumocfg",
                 "--remote-port", str(PORT_TRACI),
                 "--netstate-dump", "rawdump.xml",
                 "--no-step-log"]
    sumoProcess = subprocess.Popen(
        sumo_call, stdout=sys.stdout, stderr=sys.stderr)
    traci.init(PORT_TRACI)

    for step in range(161):
        traci.simulationStep()
        if step == 120:
            print(traci.vehicle.getDistance('Stapler_00'))
            traci.vehicle.setRoute('Stapler_00', ('ed1', 'ed5'))
            print(traci.vehicle.getRoute('Stapler_00'))
            assert(traci.vehicle.getRoute('Stapler_00')
                   == ['ed0', 'ed1', 'ed5'])
            print(traci.vehicle.getDistance('Stapler_00'))
        if step == 122:
            assert(traci.vehicle.getRoute('Stapler_00')
                   == ['ed0', 'ed1', 'ed5'])
            print(traci.vehicle.getDistance('Stapler_00'))
            traci.vehicle.setRouteID('Stapler_00', "short")
            print(traci.vehicle.getRoute('Stapler_00'))
            print(traci.vehicle.getDistance('Stapler_00'))
    traci.close()
    sumoProcess.wait()

def run(edges, connections, speedChanges, optimalization, nogui):
    '''execute the TraCI control loop'''
    traci.init(PORT)
    if not nogui:
        traci.gui.trackVehicle('View #0', '0')
    #print 'route: {0}'.format(traci.vehicle.getRoute('0'))
    destination = traci.vehicle.getRoute('0')[-1]
    edgesPoll = list(edges)

    time = traci.simulation.getCurrentTime()
    while traci.simulation.getMinExpectedNumber() > 0:
        if optimalization:
            change_edge_speed(edgesPoll, edges, speedChanges)
            edge = traci.vehicle.getRoadID('0')
            if edge in edges and traci.vehicle.getLanePosition('0') >= 0.9 * traci.lane.getLength(traci.vehicle.getLaneID('0')):
                shortestPath = graph.dijkstra(edge, destination, edges, get_costs(edges), connections)
                #print 'dijkstra: {0}'.format(shortestPath)
                traci.vehicle.setRoute('0', shortestPath)
        else:
            if len(speedChanges) > 0:
                edge, speed = speedChanges.pop()
                traci.edge.setMaxSpeed(edge, speed)
            else:
                change_edge_speed(edgesPoll, edges, [])
        traci.simulationStep()
    time = traci.simulation.getCurrentTime() - time
    traci.close()
    sys.stdout.flush()
    return time

def run():
	traci.init(int(PORT))
	step = 0
	while traci.simulation.getMinExpectedNumber() > 0:
		traci.simulationStep()
		step += 1
	traci.close()

    def __init__(self, sysArgs):
        self.network_set = False
        self.iterations_set = False
        self.initiateSimulation(sysArgs)

        if self.network_set and self.iterations_set:
            import traci

            traci.init(CommunicationsAgent.PORT)
            counter = 0

            self.name = Agent.COMM_AGENT_NAME
            self.agent_name = "CommAgent"
            self.password = Agent.COMM_AGENT_PASSWORD
            self.respond_to_ping = False

            self.Connect_RabbitMQ()

            # SR 4b the liaison creates a run id and shares it with the MACTS
            self.simulationId = datetime.datetime.now().strftime(
                "%Y%m%d|%H%M%S")
            self.sendCommand(self.publishChannel, Agent.COMMAND_BEGIN)

            # spin up the main working loop in its own thread
            thread.start_new_thread(self.working_loop, (traci, ))

            # SR 12 Network Configuration Discovery / Command Response Handler
            self.command_response_handler()

        self.sendStopMessage(self.publishChannel)

def runSingle(traciEndTime, viewRange, module, objID):
    seen1 = 0
    seen2 = 0
    step = 0
    sumoProcess = subprocess.Popen("%s -c sumo.sumocfg %s" % (sumoBinary, addOption), shell=True, stdout=sys.stdout)
#    time.sleep(20)
    traci.init(PORT)
    traci.poi.add("poi", 400, 500, (1,0,0,0))
    traci.polygon.add("poly", ((400, 400), (450, 400), (450, 400)), (1,0,0,0))
    subscribed = False
    while not step>traciEndTime:
        responses = traci.simulationStep()
        near1 = set()
        if objID in module.getContextSubscriptionResults():
            for v in module.getContextSubscriptionResults()[objID]:
                near1.add(v)
        vehs = traci.vehicle.getIDList()
        pos = {}
        for v in vehs:
            pos[v] = traci.vehicle.getPosition(v)
        shape = None
        egoPos = None
        if hasattr(module, "getPosition"):
            egoPos = module.getPosition(objID)
        elif hasattr(module, "getShape"):
            shape = module.getShape(objID)
        elif module == traci.edge:
            # it's a hack, I know,  but do we really need to introduce edge.getShape?
            shape = traci.lane.getShape(objID+"_0")
        near2 = set()
        for v in pos:
            if egoPos:
                if math.sqrt(dist2(egoPos, pos[v])) < viewRange:
                    near2.add(v)
            if shape:
                lastP = shape[0]
                for p in shape[1:]:
                    if math.sqrt(distToSegmentSquared(pos[v], lastP, p)) < viewRange:
                        near2.add(v)
                    lastP = p
        
        if not subscribed:
            module.subscribeContext(objID, traci.constants.CMD_GET_VEHICLE_VARIABLE, viewRange, [traci.constants.VAR_POSITION] )
            subscribed = True
        else:
            seen1 += len(near1)
            seen2 += len(near2)
            for v in near1:
                if v not in near2:
                    print "timestep %s: %s is missing in subscribed vehicles" % (step, v)
            for v in near2:
                if v not in near1:
                    print "timestep %s: %s is missing in surrounding vehicles" % (step, v)


        step += 1
    print "Print ended at step %s" % (traci.simulation.getCurrentTime() / DELTA_T)
    traci.close()
    sys.stdout.flush()
    print "seen %s vehicles via suscription, %s in surrounding" % (seen1, seen2)

def traciSimulation(port):
    '''
    Execute the TraCI control loop on the SUMO simulation.
    :param port:    The port used for communicating with your sumo instance
    :return:        The end second time of the simulation
    '''
    try:
        # Init the TraCI server
        traci.init(port)

        # TraCI runs the simulation step by step
        step = 0
        while traci.simulation.getMinExpectedNumber() > 0:
            traci.simulationStep()
            step += 1
    except traci.TraCIException as ex:
        logger.fatal("Exception in simulation step %d: %s" % (step, ex.message))
        return -1
    except traci.FatalTraCIError as ex:
        logger.fatal("Fatal error in simulation step %d: %s" % (step, ex.message))
        return -1
    else:
        return step + 1
    finally:
        # Close the TraCI server
        traci.close()

def run():
    """execute the TraCI control loop"""
    traci.init(PORT)
    step = 0

    num_cars = -1
    parkable_lanes = []
    parked_cars = []

    for lane_id in traci.lane.getIDList():
        if PARKING_EDGE_TWO_LABEL in lane_id:
            parkable_lanes.append(lane_id)

    while traci.simulation.getMinExpectedNumber() > 0:
        num_cars += 1
        traci.simulationStep()

        traci.vehicle.add("parking_{}".format(num_cars), "right")
        if len(parkable_lanes) >0:
            parking_target = ""
            parking_target = random.choice(parkable_lanes)
            print parking_target
            traci.vehicle.changeTarget("parking_{}".format(num_cars), "1i_parking_lane_2_2")#parking_target[:-2])
            parkable_lanes.remove(parking_target)
            parked_cars.append("parking_{}".format(num_cars))





        step += 1
    traci.close()
    sys.stdout.flush()

def run(run_time):
    ## execute the TraCI control loop
    traci.init(PORT)
    programPointer = 0 # initiates at start # len(PROGRAM) - 1 # initiates at end
    step = 0
    flow_count = 0
    first_car = True
    prev_veh_id = ' '
    pointer_offset = 0
    car_speeds = []
    

    while traci.simulation.getMinExpectedNumber() > 0 and step <= run_time*(1/step_length): 
        traci.simulationStep() # advance a simulation step

        programPointer = int(math.floor(step/(int(1/step_length))))%len(PROGRAM) - pointer_offset 

        sensor_data = traci.inductionloop.getVehicleData("sensor")

        if len(sensor_data) != 0:
            flow_increment,prev_veh_id = flowCount([sensor_data],["sensor"],prev_veh_id)
            car_speeds.append(traci.vehicle.getSpeed(sensor_data[0][0]))
            flow_count += flow_increment
            if first_car: #if its the first car, record the time that it comes in
                first_time = sensor_data[0][2]
                print first_time
                first_car = False

        if step < 600: #24960, let queue accumulate
            traci.trafficlights.setRedYellowGreenState("0", ALLRED)
        else:
            traci.trafficlights.setRedYellowGreenState("0",PROGRAM[programPointer])


        
        step  += 1
        #print str(step)
   
    print "\n \n"
    print "-------------------------------------------------------- \n"
    print "Total number of cars that have passed: " + str(flow_count)
    tau = np.diff(leaving_times)
    print "Total throughput extrapolated to 1hr: " + str(flow_count*(3600/(run_time-first_time)))
    print "Average car speed: " + str(np.mean(car_speeds))



    print "Max Theoretical throughput: " + str(3600/min(min(tau)))
    print "Min Theoretical throughput: " + str(3600/max(max(tau)))
    

    # print tau
    # print "Mean tau: " + str(np.mean(tau)) + "\n"
    # print "Var tau: " + str(np.var(tau)) + "\n"
    # print "Standard Dev tau: " + str(np.std(tau)) +"\n"

    traci.close()
    sys.stdout.flush()
    return [np.mean(tau),np.var(tau),np.std(tau)]