Python TestResult.end_in_success方法代码示例

# 需要导入模块: from test_result import TestResult [as 别名]
# 或者: from test_result.TestResult import end_in_success [as 别名]
    def __run_class_fixtures(self, stage, fixtures, callback_on_run_event, callback_on_complete_event):
        """Set the current _stage, run a set of fixtures, calling callbacks before and after each."""
        self._stage = stage

        for fixture_method in fixtures:
            result = TestResult(fixture_method)

            try:
                self.fire_event(callback_on_run_event, result)
                result.start()
                if self.__execute_block_recording_exceptions(fixture_method, result, is_class_level=True):
                    result.end_in_success()
                else:
                    if self.__class_level_failure:
                        result.end_in_failure(self.__class_level_failure)
                        ### Bump failure count?
                        ### Something about failure_limit?
                    elif self.__class_level_error:
                        result.end_in_error(self.__class_level_error)
                        ### Bump failure count?
                        ### Something about failure_limit?
                    else:
                        raise Exception("Couldn't find a class-level failure or error even"
                            " though we failed while executing a class-level fixture."
                            " This should not be possible. Aborting.")
            except (KeyboardInterrupt, SystemExit):
                result.end_in_interruption(sys.exc_info())
                raise
            finally:
                self.fire_event(callback_on_complete_event, result)

# 需要导入模块: from test_result import TestResult [as 别名]
# 或者: from test_result.TestResult import end_in_success [as 别名]
    def __run_class_setup_fixtures(self):
        """Running the class's class_setup method chain."""
        self._stage = self.STAGE_CLASS_SETUP

        for fixture_method in self.class_setup_fixtures:
            result = TestResult(fixture_method)

            try:
                for callback in self.__on_run_test_method_callbacks:
                    callback(self, fixture_method)

                result.start()

                if self.__execute_block_recording_exceptions(fixture_method, result, is_class_level=True):
                    result.end_in_success()
            except (KeyboardInterrupt, SystemExit):
                result.end_in_incomplete(sys.exc_info())
                for callback in self.__on_complete_test_method_callbacks:
                    callback(self, result)
                raise
            else:
                for callback in self.__on_complete_test_method_callbacks:
                    callback(self, result)

        self.__run_deprecated_fixture_method('classSetUp')

# 需要导入模块: from test_result import TestResult [as 别名]
# 或者: from test_result.TestResult import end_in_success [as 别名]
    def run(self):
        """Delegator method encapsulating the flow for executing a TestCase instance.

        This method tracks its progress in a TestResult with test_method 'run'.
        This TestResult is used as a signal when running in client/server mode:
        when the client is done running a TestCase and its fixtures, it sends
        this TestResult to the server during the EVENT_ON_COMPLETE_TEST_CASE
        phase.

        This could be handled better. See
        https://github.com/Yelp/Testify/issues/121.
        """

        # The TestResult constructor wants an actual method, which it inspects
        # to determine the method name (and class name, so it must be a method
        # and not a function!). self.run is as good a method as any.
        test_case_result = TestResult(self.run)
        test_case_result.start()
        self.fire_event(self.EVENT_ON_RUN_TEST_CASE, test_case_result)

        self.__run_class_setup_fixtures()
        self.__enter_class_context_managers(self.class_setup_teardown_fixtures, self.__run_test_methods)
        self.__run_class_teardown_fixtures()

        test_case_result.end_in_success()
        self.fire_event(self.EVENT_ON_COMPLETE_TEST_CASE, test_case_result)

# 需要导入模块: from test_result import TestResult [as 别名]
# 或者: from test_result.TestResult import end_in_success [as 别名]
    def __enter_class_context_managers(self, fixture_methods, callback):
        """Transform each fixture_method into a context manager with contextlib.contextmanager, enter them recursively, and call callback"""
        if fixture_methods:
            fixture_method = fixture_methods[0]
            ctm = contextmanager(fixture_method)()

            enter_result = TestResult(fixture_method)
            enter_result.start()
            self.fire_event(self.EVENT_ON_RUN_CLASS_SETUP_METHOD, enter_result)
            if self.__execute_block_recording_exceptions(ctm.__enter__, enter_result, is_class_level=True):
                enter_result.end_in_success()
            self.fire_event(self.EVENT_ON_COMPLETE_CLASS_SETUP_METHOD, enter_result)

            self.__enter_context_managers(fixture_methods[1:], callback)

            exit_result = TestResult(fixture_method)
            exit_result.start()
            self.fire_event(self.EVENT_ON_RUN_CLASS_TEARDOWN_METHOD, exit_result)
            if self.__execute_block_recording_exceptions(
                lambda: ctm.__exit__(None, None, None), exit_result, is_class_level=True
            ):
                exit_result.end_in_success()
            self.fire_event(self.EVENT_ON_COMPLETE_CLASS_TEARDOWN_METHOD, exit_result)
        else:
            callback()

# 需要导入模块: from test_result import TestResult [as 别名]
# 或者: from test_result.TestResult import end_in_success [as 别名]
    def __run_test_methods(self, class_fixture_failures):
        """Run this class's setup fixtures / test methods / teardown fixtures.

        These are run in the obvious order - setup and teardown go before and after,
        respectively, every test method.  If there was a failure in the class_setup
        phase, no method-level fixtures or test methods will be run, and we'll eventually
        skip all the way to the class_teardown phase.   If a given test method is marked
        as disabled, neither it nor its fixtures will be run.  If there is an exception
        during the setup phase, the test method will not be run and execution
        will continue with the teardown phase.
        """
        for test_method in self.runnable_test_methods():
            result = TestResult(test_method)

            # Sometimes, test cases want to take further action based on
            # results, e.g. further clean-up or reporting if a test method
            # fails. (Yelp's Selenium test cases do this.) If you need to
            # programatically inspect test results, you should use
            # self.results().

            # NOTE: THIS IS INCORRECT -- im_self is shared among all test
            # methods on the TestCase instance. This is preserved for backwards
            # compatibility and should be removed eventually.

            try:
                # run "on-run" callbacks. e.g. print out the test method name
                self.fire_event(self.EVENT_ON_RUN_TEST_METHOD, result)

                result.start()
                self.__all_test_results.append(result)

                # first, run setup fixtures
                self._stage = self.STAGE_SETUP
                with self.__test_fixtures.instance_context() as fixture_failures:
                    # we haven't had any problems in class/instance setup, onward!
                    if not (fixture_failures + class_fixture_failures):
                        self._stage = self.STAGE_TEST_METHOD
                        result.record(test_method)
                    self._stage = self.STAGE_TEARDOWN

                # maybe something broke during teardown -- record it
                for exc_info in fixture_failures + class_fixture_failures:
                    result.end_in_failure(exc_info)

                # if nothing's gone wrong, it's not about to start
                if not result.complete:
                    result.end_in_success()

            except (KeyboardInterrupt, SystemExit):
                result.end_in_interruption(sys.exc_info())
                raise

            finally:
                self.fire_event(self.EVENT_ON_COMPLETE_TEST_METHOD, result)

                if not result.success:
                    self.failure_count += 1
                    if self.failure_limit and self.failure_count >= self.failure_limit:
                        break

# 需要导入模块: from test_result import TestResult [as 别名]
# 或者: from test_result.TestResult import end_in_success [as 别名]
    def __run_test_methods(self):
        """Run this class's setup fixtures / test methods / teardown fixtures.

        These are run in the obvious order - setup and teardown go before and after,
        respectively, every test method.  If there was a failure in the class_setup
        phase, no method-level fixtures or test methods will be run, and we'll eventually
        skip all the way to the class_teardown phase.   If a given test method is marked
        as disabled, neither it nor its fixtures will be run.  If there is an exception
        during during the setup phase, the test method will not be run and execution
        will continue with the teardown phase.
        """
        for test_method in self.runnable_test_methods():

            result = TestResult(test_method)
            test_method.im_self.test_result = result

            try:
                # run "on-run" callbacks. eg/ print out the test method name
                for callback in self.__on_run_test_method_callbacks:
                    callback(self, test_method)
                result.start()

                if self.__class_level_failure:
                    result.end_in_failure(self.__class_level_failure)
                elif self.__class_level_error:
                    result.end_in_error(self.__class_level_error)
                else:
                    # first, run setup fixtures
                    self._stage = self.STAGE_SETUP
                    def _setup_block():
                        for fixture_method in self.setup_fixtures:
                            fixture_method()
                        self.__run_deprecated_fixture_method('setUp')
                    self.__execute_block_recording_exceptions(_setup_block, result)

                    # then run the test method itself, assuming setup was successful
                    self._stage = self.STAGE_TEST_METHOD
                    if not result.complete:
                        self.__execute_block_recording_exceptions(test_method, result)

                    # finally, run the teardown phase
                    self._stage = self.STAGE_TEARDOWN
                    def _teardown_block():
                        self.__run_deprecated_fixture_method('tearDown')
                        for fixture_method in self.teardown_fixtures:
                            fixture_method()
                    self.__execute_block_recording_exceptions(_teardown_block, result)

                # if nothing's gone wrong, it's not about to start
                if not result.complete:
                    result.end_in_success()
            except (KeyboardInterrupt, SystemExit):
                result.end_in_incomplete(sys.exc_info())
                for callback in self.__on_complete_test_method_callbacks:
                    callback(self, result)
                raise
            else:
                for callback in self.__on_complete_test_method_callbacks:
                    callback(self, result)

# 需要导入模块: from test_result import TestResult [as 别名]
# 或者: from test_result.TestResult import end_in_success [as 别名]
    def run(self):
        """Delegator method encapsulating the flow for executing a TestCase instance.

        This method tracks its progress in a TestResult with test_method 'run'.
        This TestResult is used as a signal when running in client/server mode:
        when the client is done running a TestCase and its fixtures, it sends
        this TestResult to the server during the EVENT_ON_COMPLETE_TEST_CASE
        phase.

        This could be handled better. See
        https://github.com/Yelp/Testify/issues/121.
        """

        # The TestResult constructor wants an actual method, which it inspects
        # to determine the method name (and class name, so it must be a method
        # and not a function!). self.run is as good a method as any.
        test_case_result = TestResult(self.run)
        test_case_result.start()
        self.fire_event(self.EVENT_ON_RUN_TEST_CASE, test_case_result)

        self._stage = self.STAGE_CLASS_SETUP
        with self.__test_fixtures.class_context(
                setup_callbacks=[
                    functools.partial(self.fire_event, self.EVENT_ON_RUN_CLASS_SETUP_METHOD),
                    functools.partial(self.fire_event, self.EVENT_ON_COMPLETE_CLASS_SETUP_METHOD),
                ],
                teardown_callbacks=[
                    functools.partial(self.fire_event, self.EVENT_ON_RUN_CLASS_TEARDOWN_METHOD),
                    functools.partial(self.fire_event, self.EVENT_ON_COMPLETE_CLASS_TEARDOWN_METHOD),
                ],
        ) as class_fixture_failures:
            # if we have class fixture failures, we're not going to bother
            # running tests, but we need to generate bogus results for them all
            # and mark them as failed.
            self.__run_test_methods(class_fixture_failures)
            self._stage = self.STAGE_CLASS_TEARDOWN

        # class fixture failures count towards our total
        self.failure_count += len(class_fixture_failures)

        # you might think that we would want to do this... but this is a
        # bogus test result used for reporting to the server. we always
        # have it report success, i guess.
        # for exc_info in fixture_failures:
        #     test_case_result.end_in_failure(exc_info)

        if not test_case_result.complete:
            test_case_result.end_in_success()

        self.fire_event(self.EVENT_ON_COMPLETE_TEST_CASE, test_case_result)

# 需要导入模块: from test_result import TestResult [as 别名]
# 或者: from test_result.TestResult import end_in_success [as 别名]
    def __run_class_fixture(self, fixture_method, function_to_call, stage, callback_on_run_event, callback_on_complete_event, fire_events=True):
        self._stage = stage

        result = TestResult(fixture_method)
        try:
            result.start()
            if fire_events:
                self.fire_event(callback_on_run_event, result)
            if self.__execute_block_recording_exceptions(function_to_call, result, is_class_level=True):
                result.end_in_success()
            else:
                self.failure_count += 1
        except (KeyboardInterrupt, SystemExit):
            result.end_in_interruption(sys.exc_info())
            raise
        finally:
            if fire_events:
                self.fire_event(callback_on_complete_event, result)

# 需要导入模块: from test_result import TestResult [as 别名]
# 或者: from test_result.TestResult import end_in_success [as 别名]
    def __run_class_fixtures(self, stage, fixtures, callback_on_run_event, callback_on_complete_event):
        """Set the current _stage, run a set of fixtures, calling callbacks before and after each."""
        self._stage = stage

        for fixture_method in fixtures:
            result = TestResult(fixture_method)

            try:
                result.start()
                self.fire_event(callback_on_run_event, result)
                if self.__execute_block_recording_exceptions(fixture_method, result, is_class_level=True):
                    result.end_in_success()
                else:
                    self.failure_count += 1
            except (KeyboardInterrupt, SystemExit):
                result.end_in_interruption(sys.exc_info())
                raise
            finally:
                self.fire_event(callback_on_complete_event, result)

# 需要导入模块: from test_result import TestResult [as 别名]
# 或者: from test_result.TestResult import end_in_success [as 别名]
    def run(self):
        """Delegator method encapsulating the flow for executing a TestCase instance.

        This method tracks its progress in a TestResult with test_method 'run'.
        This TestResult is used as a signal when running in client/server mode:
        when the client is done running a TestCase and its fixtures, it sends
        this TestResult to the server during the EVENT_ON_COMPLETE_TEST_CASE
        phase.

        This could be handled better. See
        https://github.com/Yelp/Testify/issues/121.
        """

        # The TestResult constructor wants an actual method, which it inspects
        # to determine the method name (and class name, so it must be a method
        # and not a function!). self.run is as good a method as any.
        test_case_result = TestResult(self.run)
        test_case_result.start()
        self.fire_event(self.EVENT_ON_RUN_TEST_CASE, test_case_result)

        fixtures = []
        all_class_fixtures = self.class_setup_fixtures + self.class_setup_teardown_fixtures + self.class_teardown_fixtures
        for fixture in sorted(all_class_fixtures, key=make_sortable_fixture_key):
            # We convert all class-level fixtures to
            # class_setup_teardown fixtures a) to handle all
            # class-level fixtures the same and b) to make the
            # behavior more predictable when a TestCase has different
            # fixtures interacting.
            if fixture._fixture_type == 'class_teardown':
                fixture = self.__convert_class_teardown_to_class_setup_teardown(fixture)
            elif fixture._fixture_type == 'class_setup':
                fixture = self.__convert_class_setup_to_class_setup_teardown(fixture)
            fixtures.append(fixture)

        self.__enter_class_context_managers(fixtures, self.__run_test_methods)

        test_case_result.end_in_success()
        self.fire_event(self.EVENT_ON_COMPLETE_TEST_CASE, test_case_result)

# 需要导入模块: from test_result import TestResult [as 别名]
# 或者: from test_result.TestResult import end_in_success [as 别名]
    def __run_deprecated_fixture_method(self, fixture_name):
        """This runs an old-style (eg/ 'def setUp') fixture method."""
        if hasattr(self, fixture_name):
            deprecated_method = getattr(self, fixture_name)

            if fixture_name.startswith('class'):
                result = TestResult(deprecated_method)
                try:
                    for callback in self.__on_run_test_method_callbacks:
                        callback(self, deprecated_method)

                    result.start()
                    if self.__execute_block_recording_exceptions(deprecated_method, result, is_class_level=True):
                        result.end_in_success()
                except (KeyboardInterrupt, SystemExit):
                    result.end_in_incomplete(sys.exc_info())
                    for callback in self.__on_complete_test_method_callbacks:
                        callback(self, result)
                    raise
                else:
                    for callback in self.__on_complete_test_method_callbacks:
                        callback(self, result)
            else:
                deprecated_method()

# 需要导入模块: from test_result import TestResult [as 别名]
# 或者: from test_result.TestResult import end_in_success [as 别名]
    def __run_class_teardown_fixtures(self):
        """End the process of running tests.  Run the class's class_teardown methods"""
        self._stage = self.STAGE_CLASS_TEARDOWN

        self.__run_deprecated_fixture_method('classTearDown')

        for fixture_method in self.class_teardown_fixtures:
            result = TestResult(fixture_method)
            try:
                for callback in self.__on_run_test_method_callbacks:
                    callback(self, fixture_method)

                result.start()

                if self.__execute_block_recording_exceptions(fixture_method, result, is_class_level=True):
                    result.end_in_success()
            except (KeyboardInterrupt, SystemExit):
                result.end_in_incomplete(sys.exc_info())
                for callback in self.__on_complete_test_method_callbacks:
                    callback(self, result)
                raise
            else:
                for callback in self.__on_complete_test_method_callbacks:
                    callback(self, result)

# 需要导入模块: from test_result import TestResult [as 别名]
# 或者: from test_result.TestResult import end_in_success [as 别名]
    def __run_test_methods(self):
        """Run this class's setup fixtures / test methods / teardown fixtures.

        These are run in the obvious order - setup and teardown go before and after,
        respectively, every test method.  If there was a failure in the class_setup
        phase, no method-level fixtures or test methods will be run, and we'll eventually
        skip all the way to the class_teardown phase.   If a given test method is marked
        as disabled, neither it nor its fixtures will be run.  If there is an exception
        during during the setup phase, the test method will not be run and execution
        will continue with the teardown phase.
        """
        for test_method in self.runnable_test_methods():

            result = TestResult(test_method)
            test_method.im_self.test_result = result

            try:
                self._method_level = True # Flag that we're currently running method-level stuff (rather than class-level)

                # run "on-run" callbacks. eg/ print out the test method name
                for callback in self.__callbacks[self.EVENT_ON_RUN_TEST_METHOD]:
                    callback(result.to_dict())
                result.start()

                if self.__class_level_failure:
                    result.end_in_failure(self.__class_level_failure)
                elif self.__class_level_error:
                    result.end_in_error(self.__class_level_error)
                else:
                    # first, run setup fixtures
                    self._stage = self.STAGE_SETUP
                    def _setup_block():
                        for fixture_method in self.setup_fixtures + [ self.setUp ]:
                            fixture_method()
                    self.__execute_block_recording_exceptions(_setup_block, result)

                    def _run_test_block():
                        # then run the test method itself, assuming setup was successful
                        self._stage = self.STAGE_TEST_METHOD
                        if not result.complete:
                            self.__execute_block_recording_exceptions(test_method, result)

                    def _setup_teardown_block():
                        self.__enter_context_managers(self.setup_teardown_fixtures, _run_test_block)

                    # then run any setup_teardown fixtures, assuming setup was successful.
                    if not result.complete:
                        self.__execute_block_recording_exceptions(_setup_teardown_block, result)

                    # finally, run the teardown phase
                    self._stage = self.STAGE_TEARDOWN
                    def _teardown_block():
                        for fixture_method in [ self.tearDown ] + self.teardown_fixtures:
                            fixture_method()
                    self.__execute_block_recording_exceptions(_teardown_block, result)

                # if nothing's gone wrong, it's not about to start
                if not result.complete:
                    result.end_in_success()
            except (KeyboardInterrupt, SystemExit):
                result.end_in_interruption(sys.exc_info())
                raise
            finally:
                for callback in self.__callbacks[self.EVENT_ON_COMPLETE_TEST_METHOD]:
                    callback(result.to_dict())

                self._method_level = False

                if not result.success:
                    self.failure_count += 1
                    if self.failure_limit and self.failure_count >= self.failure_limit:
                        return