当前位置: 首页>>代码示例>>Python>>正文


Python test_ap_eap.int_eap_server_params函数代码示例

本文整理汇总了Python中test_ap_eap.int_eap_server_params函数的典型用法代码示例。如果您正苦于以下问题:Python int_eap_server_params函数的具体用法?Python int_eap_server_params怎么用?Python int_eap_server_params使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了int_eap_server_params函数的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Python代码示例。

示例1: test_erp_server_no_match

def test_erp_server_no_match(dev, apdev):
    """ERP enabled on server and peer, but server has no key match"""
    check_erp_capa(dev[0])
    params = int_eap_server_params()
    params['erp_send_reauth_start'] = '1'
    params['erp_domain'] = 'example.com'
    params['eap_server_erp'] = '1'
    params['disable_pmksa_caching'] = '1'
    hapd = hostapd.add_ap(apdev[0]['ifname'], params)

    dev[0].request("ERP_FLUSH")
    id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                        eap="PSK", identity="[email protected]",
                        password_hex="0123456789abcdef0123456789abcdef",
                        erp="1", scan_freq="2412")
    dev[0].request("DISCONNECT")
    dev[0].wait_disconnected(timeout=15)
    hapd.request("ERP_FLUSH")
    dev[0].request("RECONNECT")
    ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS",
                            "CTRL-EVENT-EAP-FAILURE"], timeout=15)
    if ev is None:
        raise Exception("EAP result timed out")
    if "CTRL-EVENT-EAP-SUCCESS" in ev:
        raise Exception("Unexpected EAP success")
    dev[0].request("DISCONNECT")
    dev[0].select_network(id)
    ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=15)
    if ev is None:
        raise Exception("EAP success timed out")
    if "EAP re-authentication completed successfully" in ev:
        raise Exception("Unexpected use of ERP")
    dev[0].wait_connected(timeout=15, error="Reconnection timed out")
开发者ID:islipfd19,项目名称:hostap,代码行数:33,代码来源:test_erp.py

示例2: test_tnc_peap_soh_errors

def test_tnc_peap_soh_errors(dev, apdev):
    """TNC PEAP-SoH local error cases"""
    params = int_eap_server_params()
    params["tnc"] = "1"
    hostapd.add_ap(apdev[0], params)

    tests = [ (1, "tncc_build_soh"),
              (1, "eap_msg_alloc;=eap_peap_phase2_request") ]
    for count, func in tests:
        with alloc_fail(dev[0], count, func):
            dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                           eap="PEAP", identity="user", password="password",
                           ca_cert="auth_serv/ca.pem",
                           phase1="peapver=0 tnc=soh cryptobinding=0",
                           phase2="auth=MSCHAPV2",
                           scan_freq="2412", wait_connect=False)
            wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
            dev[0].request("REMOVE_NETWORK all")
            dev[0].wait_disconnected()

    with fail_test(dev[0], 1, "os_get_random;tncc_build_soh"):
        dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                       eap="PEAP", identity="user", password="password",
                       ca_cert="auth_serv/ca.pem",
                       phase1="peapver=0 tnc=soh cryptobinding=0",
                       phase2="auth=MSCHAPV2",
                       scan_freq="2412", wait_connect=False)
        wait_fail_trigger(dev[0], "GET_FAIL")
        dev[0].request("REMOVE_NETWORK all")
        dev[0].wait_disconnected()
开发者ID:9A9A,项目名称:wpa_supplicant-fork,代码行数:30,代码来源:test_tnc.py

示例3: test_tnc_peap_soh

def test_tnc_peap_soh(dev, apdev):
    """TNC PEAP-SoH"""
    params = int_eap_server_params()
    params["tnc"] = "1"
    hostapd.add_ap(apdev[0], params)

    dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                   eap="PEAP", identity="user", password="password",
                   ca_cert="auth_serv/ca.pem",
                   phase1="peapver=0 tnc=soh cryptobinding=0",
                   phase2="auth=MSCHAPV2",
                   scan_freq="2412", wait_connect=False)
    dev[0].wait_connected(timeout=10)

    dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                   eap="PEAP", identity="user", password="password",
                   ca_cert="auth_serv/ca.pem",
                   phase1="peapver=0 tnc=soh1 cryptobinding=1",
                   phase2="auth=MSCHAPV2",
                   scan_freq="2412", wait_connect=False)
    dev[1].wait_connected(timeout=10)

    dev[2].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                   eap="PEAP", identity="user", password="password",
                   ca_cert="auth_serv/ca.pem",
                   phase1="peapver=0 tnc=soh2 cryptobinding=2",
                   phase2="auth=MSCHAPV2",
                   scan_freq="2412", wait_connect=False)
    dev[2].wait_connected(timeout=10)
开发者ID:9A9A,项目名称:wpa_supplicant-fork,代码行数:29,代码来源:test_tnc.py

示例4: test_erp

def test_erp(dev, apdev):
    """ERP enabled on server and peer"""
    check_erp_capa(dev[0])
    params = int_eap_server_params()
    params['erp_send_reauth_start'] = '1'
    params['erp_domain'] = 'example.com'
    params['eap_server_erp'] = '1'
    params['disable_pmksa_caching'] = '1'
    hapd = hostapd.add_ap(apdev[0], params)

    dev[0].request("ERP_FLUSH")
    dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                   eap="PSK", identity="[email protected]",
                   password_hex="0123456789abcdef0123456789abcdef",
                   erp="1", scan_freq="2412")
    for i in range(3):
        dev[0].request("DISCONNECT")
        dev[0].wait_disconnected(timeout=15)
        dev[0].request("RECONNECT")
        ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=15)
        if ev is None:
            raise Exception("EAP success timed out")
        if "EAP re-authentication completed successfully" not in ev:
            raise Exception("Did not use ERP")
        dev[0].wait_connected(timeout=15, error="Reconnection timed out")
开发者ID:janetuk,项目名称:mech_eap,代码行数:25,代码来源:test_erp.py

示例5: test_erp_anonymous_identity

def test_erp_anonymous_identity(dev, apdev):
    """ERP and anonymous identity"""
    check_erp_capa(dev[0])
    params = int_eap_server_params()
    params['erp_send_reauth_start'] = '1'
    params['erp_domain'] = 'example.com'
    params['eap_server_erp'] = '1'
    params['disable_pmksa_caching'] = '1'
    hapd = hostapd.add_ap(apdev[0]['ifname'], params)

    dev[0].request("ERP_FLUSH")
    dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
                   identity="erp-ttls",
                   anonymous_identity="[email protected]",
                   password="password",
                   ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
                   erp="1", scan_freq="2412")
    for i in range(3):
        dev[0].request("DISCONNECT")
        dev[0].wait_disconnected(timeout=15)
        dev[0].request("RECONNECT")
        ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=15)
        if ev is None:
            raise Exception("EAP success timed out")
        if "EAP re-authentication completed successfully" not in ev:
            raise Exception("Did not use ERP")
        dev[0].wait_connected(timeout=15, error="Reconnection timed out")
开发者ID:islipfd19,项目名称:hostap,代码行数:27,代码来源:test_erp.py

示例6: test_tnc_fast

def test_tnc_fast(dev, apdev):
    """TNC FAST"""
    params = int_eap_server_params()
    params["tnc"] = "1"
    params["pac_opaque_encr_key"] ="000102030405060708090a0b0c0d0e00"
    params["eap_fast_a_id"] = "101112131415161718191a1b1c1d1e00"
    params["eap_fast_a_id_info"] = "test server2"

    hostapd.add_ap(apdev[0]['ifname'], params)

    if not os.path.exists("tnc/libhostap_imc.so"):
        logger.info("No IMC installed - skip")
        return "skip"

    dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                   eap="FAST", identity="user",
                   anonymous_identity="FAST", password="password",
                   phase2="auth=GTC",
                   phase1="fast_provisioning=2",
                   pac_file="blob://fast_pac_auth_tnc",
                   ca_cert="auth_serv/ca.pem",
                   wait_connect=False)
    ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=10)
    if ev is None:
        raise Exception("Connection timed out")
开发者ID:LiZhaoxing,项目名称:hostapd,代码行数:25,代码来源:test_tnc.py

示例7: test_tnc_peap_soh

def test_tnc_peap_soh(dev, apdev):
    """TNC PEAP-SoH"""
    params = int_eap_server_params()
    params["tnc"] = "1"
    hostapd.add_ap(apdev[0]['ifname'], params)

    dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                   eap="PEAP", identity="user", password="password",
                   ca_cert="auth_serv/ca.pem",
                   phase1="peapver=0 tnc=soh cryptobinding=0",
                   phase2="auth=MSCHAPV2",
                   wait_connect=False)
    ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=10)
    if ev is None:
        raise Exception("Connection timed out")

    dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                   eap="PEAP", identity="user", password="password",
                   ca_cert="auth_serv/ca.pem",
                   phase1="peapver=0 tnc=soh1 cryptobinding=1",
                   phase2="auth=MSCHAPV2",
                   wait_connect=False)
    ev = dev[1].wait_event(["CTRL-EVENT-CONNECTED"], timeout=10)
    if ev is None:
        raise Exception("Connection timed out")

    dev[2].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                   eap="PEAP", identity="user", password="password",
                   ca_cert="auth_serv/ca.pem",
                   phase1="peapver=0 tnc=soh2 cryptobinding=2",
                   phase2="auth=MSCHAPV2",
                   wait_connect=False)
    ev = dev[2].wait_event(["CTRL-EVENT-CONNECTED"], timeout=10)
    if ev is None:
        raise Exception("Connection timed out")
开发者ID:LiZhaoxing,项目名称:hostapd,代码行数:35,代码来源:test_tnc.py

示例8: test_tnc_ttls_errors

def test_tnc_ttls_errors(dev, apdev):
    """TNC TTLS local error cases"""
    if not os.path.exists("tnc/libhostap_imc.so"):
        raise HwsimSkip("No IMC installed")
    check_eap_capa(dev[0], "MSCHAPV2")

    params = int_eap_server_params()
    params["tnc"] = "1"
    params["fragment_size"] = "150"
    hostapd.add_ap(apdev[0], params)

    tests = [(1, "eap_ttls_process_phase2_eap;eap_ttls_process_tnc_start",
              "DOMAIN\mschapv2 user", "auth=MSCHAPV2"),
             (1, "eap_ttls_process_phase2_eap;eap_ttls_process_tnc_start",
              "mschap user", "auth=MSCHAP"),
             (1, "=eap_tnc_init", "chap user", "auth=CHAP"),
             (1, "tncc_init;eap_tnc_init", "pap user", "auth=PAP"),
             (1, "eap_msg_alloc;eap_tnc_build_frag_ack",
              "pap user", "auth=PAP"),
             (1, "eap_msg_alloc;eap_tnc_build_msg",
              "pap user", "auth=PAP"),
             (1, "wpabuf_alloc;=eap_tnc_process_fragment",
              "pap user", "auth=PAP"),
             (1, "eap_msg_alloc;=eap_tnc_process", "pap user", "auth=PAP"),
             (1, "wpabuf_alloc;=eap_tnc_process", "pap user", "auth=PAP"),
             (1, "dup_binstr;tncc_process_if_tnccs", "pap user", "auth=PAP"),
             (1, "tncc_get_base64;tncc_process_if_tnccs",
              "pap user", "auth=PAP"),
             (1, "tncc_if_tnccs_start", "pap user", "auth=PAP"),
             (1, "tncc_if_tnccs_end", "pap user", "auth=PAP"),
             (1, "tncc_parse_imc", "pap user", "auth=PAP"),
             (2, "tncc_parse_imc", "pap user", "auth=PAP"),
             (3, "tncc_parse_imc", "pap user", "auth=PAP"),
             (1, "os_readfile;tncc_read_config", "pap user", "auth=PAP"),
             (1, "tncc_init", "pap user", "auth=PAP"),
             (1, "TNC_TNCC_ReportMessageTypes", "pap user", "auth=PAP"),
             (1, "base64_gen_encode;?base64_encode;TNC_TNCC_SendMessage",
              "pap user", "auth=PAP"),
             (1, "=TNC_TNCC_SendMessage", "pap user", "auth=PAP"),
             (1, "tncc_get_base64;tncc_process_if_tnccs",
              "pap user", "auth=PAP")]
    for count, func, identity, phase2 in tests:
        with alloc_fail(dev[0], count, func):
            dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                           scan_freq="2412",
                           eap="TTLS", anonymous_identity="ttls",
                           identity=identity, password="password",
                           ca_cert="auth_serv/ca.pem", phase2=phase2,
                           fragment_size="150", wait_connect=False)
            ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD"],
                                   timeout=15)
            if ev is None:
                raise Exception("Timeout on EAP start")
            wait_fail_trigger(dev[0], "GET_ALLOC_FAIL",
                              note="Allocation failure not triggered for: %d:%s" % (count, func))
            dev[0].request("REMOVE_NETWORK all")
            dev[0].wait_disconnected()
            dev[0].dump_monitor()
开发者ID:greearb,项目名称:hostap-ct,代码行数:58,代码来源:test_tnc.py

示例9: test_erp_home_realm_oom

def test_erp_home_realm_oom(dev, apdev):
    """ERP and home realm OOM"""
    check_erp_capa(dev[0])
    params = int_eap_server_params()
    params['erp_send_reauth_start'] = '1'
    params['erp_domain'] = 'example.com'
    params['eap_server_erp'] = '1'
    params['disable_pmksa_caching'] = '1'
    hapd = hostapd.add_ap(apdev[0]['ifname'], params)

    for count in range(1, 3):
        with alloc_fail(dev[0], count, "eap_home_realm"):
            dev[0].request("ERP_FLUSH")
            dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
                           identity="[email protected]",
                           anonymous_identity="[email protected]",
                           password="password",
                           ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
                           erp="1", scan_freq="2412", wait_connect=False)
            dev[0].wait_connected(timeout=10)
            wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
            dev[0].request("REMOVE_NETWORK all")
            dev[0].wait_disconnected()

    for count in range(1, 3):
        with alloc_fail(dev[0], count, "eap_home_realm"):
            dev[0].request("ERP_FLUSH")
            dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
                           identity="erp-ttls",
                           anonymous_identity="[email protected]",
                           password="password",
                           ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
                           erp="1", scan_freq="2412", wait_connect=False)
            dev[0].wait_connected(timeout=10)
            wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
            dev[0].request("REMOVE_NETWORK all")
            dev[0].wait_disconnected()

    for count in range(1, 3):
        dev[0].request("ERP_FLUSH")
        dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
                       identity="[email protected]",
                       anonymous_identity="[email protected]",
                       password="password",
                       ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
                       erp="1", scan_freq="2412", wait_connect=False)
        dev[0].wait_connected(timeout=10)
        if range > 1:
            continue
        with alloc_fail(dev[0], count, "eap_home_realm"):
            dev[0].request("DISCONNECT")
            dev[0].wait_disconnected(timeout=15)
            dev[0].request("RECONNECT")
            wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
            dev[0].request("REMOVE_NETWORK all")
            dev[0].wait_disconnected()
开发者ID:islipfd19,项目名称:hostap,代码行数:56,代码来源:test_erp.py

示例10: test_erp_enabled_on_server

def test_erp_enabled_on_server(dev, apdev):
    """ERP enabled on internal EAP server, but disabled on peer"""
    params = int_eap_server_params()
    params['erp_send_reauth_start'] = '1'
    params['erp_domain'] = 'example.com'
    params['eap_server_erp'] = '1'
    hapd = hostapd.add_ap(apdev[0]['ifname'], params)

    dev[0].request("ERP_FLUSH")
    dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                   eap="PAX", identity="[email protected]",
                   password_hex="0123456789abcdef0123456789abcdef",
                   scan_freq="2412")
开发者ID:islipfd19,项目名称:hostap,代码行数:13,代码来源:test_erp.py

示例11: test_tnc_ttls

def test_tnc_ttls(dev, apdev):
    """TNC TTLS"""
    params = int_eap_server_params()
    params["tnc"] = "1"
    hostapd.add_ap(apdev[0]['ifname'], params)

    if not os.path.exists("tnc/libhostap_imc.so"):
        raise HwsimSkip("No IMC installed")

    dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                   eap="TTLS", identity="DOMAIN\mschapv2 user",
                   anonymous_identity="ttls", password="password",
                   phase2="auth=MSCHAPV2",
                   ca_cert="auth_serv/ca.pem",
                   wait_connect=False)
    dev[0].wait_connected(timeout=10)
开发者ID:Hansenq,项目名称:wifi-goes-to-town,代码行数:16,代码来源:test_tnc.py

示例12: test_tnc_ttls_fragmentation

def test_tnc_ttls_fragmentation(dev, apdev):
    """TNC TTLS with fragmentation"""
    check_eap_capa(dev[0], "MSCHAPV2")
    params = int_eap_server_params()
    params["tnc"] = "1"
    params["fragment_size"] = "150"
    hostapd.add_ap(apdev[0], params)

    if not os.path.exists("tnc/libhostap_imc.so"):
        raise HwsimSkip("No IMC installed")

    dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                   eap="TTLS", identity="DOMAIN\mschapv2 user",
                   anonymous_identity="ttls", password="password",
                   phase2="auth=MSCHAPV2",
                   ca_cert="auth_serv/ca.pem",
                   fragment_size="150",
                   scan_freq="2412", wait_connect=False)
    dev[0].wait_connected(timeout=10)
开发者ID:9A9A,项目名称:wpa_supplicant-fork,代码行数:19,代码来源:test_tnc.py

示例13: test_tnc_ttls

def test_tnc_ttls(dev, apdev):
    """TNC TTLS"""
    params = int_eap_server_params()
    params["tnc"] = "1"
    hostapd.add_ap(apdev[0]['ifname'], params)

    if not os.path.exists("tnc/libhostap_imc.so"):
        logger.info("No IMC installed - skip")
        return "skip"

    dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                   eap="TTLS", identity="DOMAIN\mschapv2 user",
                   anonymous_identity="ttls", password="password",
                   phase2="auth=MSCHAPV2",
                   ca_cert="auth_serv/ca.pem",
                   wait_connect=False)
    ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=10)
    if ev is None:
        raise Exception("Connection timed out")
开发者ID:LiZhaoxing,项目名称:hostapd,代码行数:19,代码来源:test_tnc.py

示例14: test_tnc_fast

def test_tnc_fast(dev, apdev):
    """TNC FAST"""
    check_eap_capa(dev[0], "FAST")
    params = int_eap_server_params()
    params["tnc"] = "1"
    params["pac_opaque_encr_key"] ="000102030405060708090a0b0c0d0e00"
    params["eap_fast_a_id"] = "101112131415161718191a1b1c1d1e00"
    params["eap_fast_a_id_info"] = "test server2"

    hostapd.add_ap(apdev[0], params)

    if not os.path.exists("tnc/libhostap_imc.so"):
        raise HwsimSkip("No IMC installed")

    dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
                   eap="FAST", identity="user",
                   anonymous_identity="FAST", password="password",
                   phase2="auth=GTC",
                   phase1="fast_provisioning=2",
                   pac_file="blob://fast_pac_auth_tnc",
                   ca_cert="auth_serv/ca.pem",
                   scan_freq="2412", wait_connect=False)
    dev[0].wait_connected(timeout=10)
开发者ID:9A9A,项目名称:wpa_supplicant-fork,代码行数:23,代码来源:test_tnc.py

示例15: test_erp_local_errors

def test_erp_local_errors(dev, apdev):
    """ERP and local error cases"""
    check_erp_capa(dev[0])
    params = int_eap_server_params()
    params['erp_send_reauth_start'] = '1'
    params['erp_domain'] = 'example.com'
    params['eap_server_erp'] = '1'
    params['disable_pmksa_caching'] = '1'
    hapd = hostapd.add_ap(apdev[0]['ifname'], params)

    dev[0].request("ERP_FLUSH")
    with alloc_fail(dev[0], 1, "eap_peer_erp_init"):
        dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
                       identity="[email protected]",
                       anonymous_identity="[email protected]",
                       password="password",
                       ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
                       erp="1", scan_freq="2412")
        dev[0].request("REMOVE_NETWORK all")
        dev[0].wait_disconnected()

    for count in range(1, 6):
        dev[0].request("ERP_FLUSH")
        with fail_test(dev[0], count, "hmac_sha256_kdf;eap_peer_erp_init"):
            dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
                           identity="[email protected]",
                           anonymous_identity="[email protected]",
                           password="password",
                           ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
                           erp="1", scan_freq="2412")
            dev[0].request("REMOVE_NETWORK all")
            dev[0].wait_disconnected()

    dev[0].request("ERP_FLUSH")
    with alloc_fail(dev[0], 1, "eap_msg_alloc;eap_peer_erp_reauth_start"):
        dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
                       identity="[email protected]",
                       anonymous_identity="[email protected]",
                       password="password",
                       ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
                       erp="1", scan_freq="2412")
        dev[0].request("DISCONNECT")
        dev[0].wait_disconnected(timeout=15)
        dev[0].request("RECONNECT")
        wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
        dev[0].request("REMOVE_NETWORK all")
        dev[0].wait_disconnected()

    dev[0].request("ERP_FLUSH")
    with fail_test(dev[0], 1, "hmac_sha256;eap_peer_erp_reauth_start"):
        dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
                       identity="[email protected]",
                       anonymous_identity="[email protected]",
                       password="password",
                       ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
                       erp="1", scan_freq="2412")
        dev[0].request("DISCONNECT")
        dev[0].wait_disconnected(timeout=15)
        dev[0].request("RECONNECT")
        wait_fail_trigger(dev[0], "GET_FAIL")
        dev[0].request("REMOVE_NETWORK all")
        dev[0].wait_disconnected()

    dev[0].request("ERP_FLUSH")
    with fail_test(dev[0], 1, "hmac_sha256;eap_peer_finish"):
        dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
                       identity="[email protected]",
                       anonymous_identity="[email protected]",
                       password="password",
                       ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
                       erp="1", scan_freq="2412")
        dev[0].request("DISCONNECT")
        dev[0].wait_disconnected(timeout=15)
        dev[0].request("RECONNECT")
        wait_fail_trigger(dev[0], "GET_FAIL")
        dev[0].request("REMOVE_NETWORK all")
        dev[0].wait_disconnected()
开发者ID:islipfd19,项目名称:hostap,代码行数:77,代码来源:test_erp.py


注:本文中的test_ap_eap.int_eap_server_params函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。