本文整理汇总了Python中termstyle.red函数的典型用法代码示例。如果您正苦于以下问题：Python red函数的具体用法？Python red怎么用？Python red使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了red函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Python代码示例。
示例1: test_path_stripping_in_test_failure_last_line
def test_path_stripping_in_test_failure_last_line(self):
f = io.StringIO()
r = TerminalReporter(watch_path='/path/to/watch',
build_path='/path/to/build',
terminal=Terminal(stream=f))
failures = [[
'core.ok',
[
'/path/to/watch/test/test_core.cc:12: Failure',
'Value of: 2',
'Expected: ok()',
'Which is: 42',
], [], FAILED
]]
r.report_failures(failures)
expected = [
'================================== FAILURES ==================================', # noqa
termstyle.bold(termstyle.red(
'__________________________________ core.ok ___________________________________' # noqa
)),
'/path/to/watch/test/test_core.cc:12: Failure',
'Value of: 2',
'Expected: ok()',
'Which is: 42',
termstyle.bold(termstyle.red(
'____________________________ test/test_core.cc:12 ____________________________', # noqa
)),
]
actual = f.getvalue().splitlines()
assert actual == expected示例2: test_report_multiple_failed
def test_report_multiple_failed(self):
f = io.StringIO()
r = TerminalReporter(watch_path='/path',
build_path=None,
terminal=Terminal(stream=f))
results = {
'total_runtime': 2.09,
'total_passed': 0,
'total_failed': 2,
'failures': [
[
'fail1',
[
'/path/to/file:12: blah',
'results line 2',
'results line 3',
'results line 4',
], [], FAILED
],
[
'fail2',
[
'/path/to/file:102: blah',
'results line 2',
'results line 3',
'results line 4',
], [], FAILED
],
]
}
r.report_results(results)
expected = [
'================================== FAILURES ==================================', # noqa
termstyle.bold(termstyle.red(
'___________________________________ fail1 ____________________________________' # noqa
)),
'/path/to/file:12: blah',
'results line 2',
'results line 3',
'results line 4',
termstyle.bold(termstyle.red(
'_________________________________ to/file:12 _________________________________' # noqa
)),
termstyle.bold(termstyle.red(
'___________________________________ fail2 ____________________________________' # noqa
)),
'/path/to/file:102: blah',
'results line 2',
'results line 3',
'results line 4',
termstyle.bold(termstyle.red(
'________________________________ to/file:102 _________________________________' # noqa
)),
termstyle.bold(termstyle.red(
'===================== 2 failed, 0 passed in 2.09 seconds =====================' # noqa
)),
]
actual = f.getvalue().splitlines()
assert actual == expected示例3: dump_info
def dump_info(fname):
info = red('unknwon error')
if not os.path.getsize(fname):
info = red('empty file')
else:
try:
handle = open(fname, 'rt')
except OSError as exc:
info = red('unable to open file: {!s}'.format(exc))
else:
try:
content = json.load(handle)
except ValueError as exc:
info = red('unable to load JSON: {!s}'.format(exc))
else:
try:
info = "{!s} dumps".format(len(content.keys()))
except AttributeError as exc:
info = red("unable to count dumps: {!s}".format(exc))
finally:
try:
handle.close()
except NameError:
pass
return info示例4: do_start_and_return
def do_start_and_return (self, line):
"""Start TRex run and once in 'Running' mode, return to cmd prompt"""
print termstyle.green("*** Starting TRex run, wait until in 'Running' state ***")
try:
ret = self.trex.start_trex(**self.run_params)
print termstyle.green("*** End of scenario (TRex is probably still running!) ***")
except TRexException as inst:
print termstyle.red(inst)示例5: do_stop_trex
def do_stop_trex (self, line):
"""Try to stop TRex run (if TRex is currently running)"""
print termstyle.green("*** Starting TRex termination ***")
try:
ret = self.trex.stop_trex()
print termstyle.green("*** End of scenario (TRex is not running now) ***")
except TRexException as inst:
print termstyle.red(inst)示例6: do_kill_indiscriminately
def do_kill_indiscriminately (self, line):
"""Force killing of running TRex process (if exists) on the server."""
print termstyle.green("*** Starting TRex termination ***")
ret = self.trex.force_kill()
if ret:
print termstyle.green("*** End of scenario (TRex is not running now) ***")
elif ret is None:
print termstyle.magenta("*** End of scenario (TRex termination aborted) ***")
else:
print termstyle.red("*** End of scenario (TRex termination failed) ***")示例7: do_reserve_trex
def do_reserve_trex (self, user):
"""Reserves the usage of TRex to a certain user"""
try:
if not user:
ret = self.trex.reserve_trex()
else:
ret = self.trex.reserve_trex(user.split(' ')[0])
print termstyle.green("*** TRex reserved successfully ***")
except TRexException as inst:
print termstyle.red(inst)示例8: do_cancel_reservation
def do_cancel_reservation (self, user):
"""Cancels a current reservation of TRex to a certain user"""
try:
if not user:
ret = self.trex.cancel_reservation()
else:
ret = self.trex.cancel_reservation(user.split(' ')[0])
print termstyle.green("*** TRex reservation canceled successfully ***")
except TRexException as inst:
print termstyle.red(inst)示例9: do_poll_once
def do_poll_once (self, line):
"""Performs a single poll of TRex current data dump (if TRex is running) and prompts and short version of latest result_obj"""
print termstyle.green("*** Trying TRex single poll ***")
try:
last_res = dict()
if self.trex.is_running(dump_out = last_res):
obj = self.trex.get_result_obj()
print obj
else:
print termstyle.magenta("TRex isn't currently running.")
print termstyle.green("*** End of scenario (TRex is posssibly still running!) ***")
except TRexException as inst:
print termstyle.red(inst)示例10: do_run_until_finish
def do_run_until_finish (self, sample_rate):
"""Starts TRex and sample server until run is done."""
print termstyle.green("*** Starting TRex run_until_finish scenario ***")
if not sample_rate: # use default sample rate if not passed
sample_rate = 5
try:
sample_rate = int(sample_rate)
ret = self.trex.start_trex(**self.run_params)
self.trex.sample_to_run_finish(sample_rate)
print termstyle.green("*** End of TRex run ***")
except ValueError as inst:
print termstyle.magenta("Provided illegal sample rate value. Please try again.\n[", inst,"]")
except TRexException as inst:
print termstyle.red(inst)示例11: _summarize
def _summarize(self):
"""summarize all tests - the number of failures, errors and successes"""
self._line(termstyle.black)
self._out("%s test%s run in %0.1f seconds" % (
self.total,
self._plural(self.total),
time.time() - self.start_time))
if self.total > self.success:
self._outln(". ")
additionals = []
if self.failure > 0:
additionals.append(termstyle.red("%s FAILED" % (
self.failure,)))
if self.error > 0:
additionals.append(termstyle.yellow("%s error%s" % (
self.error,
self._plural(self.error) )))
if self.skip > 0:
additionals.append(termstyle.blue("%s skipped" % (
self.skip)))
self._out(', '.join(additionals))
self._out(termstyle.green(" (%s test%s passed)" % (
self.success,
self._plural(self.success) )))
self._outln()示例12: test_report_with_stdout_and_stderr_in_additional_output
def test_report_with_stdout_and_stderr_in_additional_output(self):
f = io.StringIO()
r = TerminalReporter(watch_path='/path',
build_path=None,
terminal=Terminal(stream=f))
results = {
'total_runtime': 2.09,
'total_passed': 0,
'total_failed': 1,
'failures': [
[
'fail1',
[
'extra line 1',
'extra line 2',
'/path/to/file:12: blah',
'results line 1',
'results line 2',
'results line 3',
], [], FAILED
],
]
}
r.report_results(results)
expected = [
'================================== FAILURES ==================================', # noqa
termstyle.bold(termstyle.red(
'___________________________________ fail1 ____________________________________' # noqa
)),
'/path/to/file:12: blah',
'results line 1',
'results line 2',
'results line 3',
'----------------------------- Additional output ------------------------------', # noqa
'extra line 1',
'extra line 2',
termstyle.bold(termstyle.red(
'_________________________________ to/file:12 _________________________________' # noqa
)),
termstyle.bold(termstyle.red(
'===================== 1 failed, 0 passed in 2.09 seconds =====================' # noqa
)),
]
actual = f.getvalue().splitlines()
assert actual == expected示例13: test_writeln_decorator
def test_writeln_decorator(self):
f = io.StringIO()
t = Terminal(stream=f)
t.writeln('hello', decorator=[bold])
assert f.getvalue() == bold('hello') + linesep
f = io.StringIO()
t = Terminal(stream=f)
t.writeln('hello', decorator=[bold, red])
assert f.getvalue() == red(bold('hello')) + linesep示例14: do_run_until_condition
def do_run_until_condition (self, sample_rate):
"""Starts TRex and sample server until condition is satisfied."""
print termstyle.green("*** Starting TRex run until condition is satisfied scenario ***")
def condition (result_obj):
return result_obj.get_current_tx_rate()['m_tx_pps'] > 200000
if not sample_rate: # use default sample rate if not passed
sample_rate = 5
try:
sample_rate = int(sample_rate)
ret = self.trex.start_trex(**self.run_params)
ret_val = self.trex.sample_until_condition(condition, sample_rate)
print ret_val
print termstyle.green("*** End of TRex run ***")
except ValueError as inst:
print termstyle.magenta("Provided illegal sample rate value. Please try again.\n[", inst,"]")
except TRexException as inst:
print termstyle.red(inst)示例15: start_master_daemon
def start_master_daemon():
if master_daemon.is_running():
raise Exception('Master daemon is already running')
proc = multiprocessing.Process(target = start_master_daemon_func)
proc.daemon = True
proc.start()
for i in range(50):
if master_daemon.is_running():
return True
sleep(0.1)
fail(termstyle.red('Master daemon failed to run. Please look in log: %s' % logging_file))