本文整理汇总了Python中stcgal.utils.Utils类的典型用法代码示例。如果您正苦于以下问题：Python Utils类的具体用法？Python Utils怎么用？Python Utils使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了Utils类的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Python代码示例。
示例1: test_decode_packed_bcd
def test_decode_packed_bcd(self):
"""Test packed BCD decoder"""
self.assertEqual(Utils.decode_packed_bcd(0x01), 1)
self.assertEqual(Utils.decode_packed_bcd(0x10), 10)
self.assertEqual(Utils.decode_packed_bcd(0x11), 11)
self.assertEqual(Utils.decode_packed_bcd(0x25), 25)
self.assertEqual(Utils.decode_packed_bcd(0x99), 99)示例2: set_watchdog_prescale
def set_watchdog_prescale(self, val):
val = Utils.to_int(val)
wd_vals = {2: 0, 4: 1, 8: 2, 16: 3, 32: 4, 64: 5, 128: 6, 256: 7}
if val not in wd_vals.keys():
raise ValueError("must be one of %s" % list(wd_vals.keys()))
self.msr[3] &= 0xf8
self.msr[3] |= wd_vals[val]示例3: set_osc_stable_delay
def set_osc_stable_delay(self, val):
val = Utils.to_int(val)
osc_vals = {4096: 0, 8192: 1, 16384: 2, 32768: 3}
if val not in osc_vals.keys():
raise ValueError("must be one of %s" % list(osc_vals.keys()))
self.msr[0] &= 0xcf
self.msr[0] |= osc_vals[val] << 4示例4: test_to_int
def test_to_int(self):
"""Test wrapped integer conversion"""
self.assertEqual(Utils.to_int("2"), 2)
self.assertEqual(Utils.to_int("0x10"), 16)
with self.assertRaises(ValueError):
Utils.to_int("a")
with self.assertRaises(ValueError):
Utils.to_int("")
with self.assertRaises(ValueError):
Utils.to_int(None)示例5: set_ee_erase
def set_ee_erase(self, val):
val = Utils.to_bool(val)
self.msr[0] &= 0xfd
self.msr[0] |= 0x02 if val else 0x00示例6: set_low_voltage
def set_low_voltage(self, val):
val = Utils.to_int(val)
if val not in range(0, 4):
raise ValueError("must be one of %s" % list(range(0, 4)))
self.msr[2] &= 0xfc
self.msr[2] |= 3 - val示例7: set_ale
def set_ale(self, val):
val = Utils.to_bool(val)
self.msr &= 0xdf
self.msr |= 0x20 if bool(val) else 0x00示例8: set_t6
def set_t6(self, val):
val = Utils.to_bool(val)
self.msr &= 0xfe
self.msr |= 0x01 if not bool(val) else 0x00示例9: set_uart1_remap
def set_uart1_remap(self, val):
val = Utils.to_bool(val)
self.msr[1] &= 0xbf
self.msr[1] |= 0x40 if val else 0x00示例10: set_uart_passthrough
def set_uart_passthrough(self, val):
val = Utils.to_bool(val)
self.msr[1] &= 0xef
self.msr[1] |= 0x10 if val else 0x00示例11: set_eeprom_lvd
def set_eeprom_lvd(self, val):
val = Utils.to_bool(val)
self.msr[1] &= 0x7f
self.msr[1] |= 0x80 if val else 0x00示例12: set_low_voltage_detect
def set_low_voltage_detect(self, val):
val = Utils.to_bool(val)
self.msr[0] &= 0xbf
self.msr[0] |= 0x40 if not val else 0x00示例13: set_reset_pin_enabled
def set_reset_pin_enabled(self, val):
val = Utils.to_bool(val)
self.msr[0] &= 0xfe
self.msr[0] |= 0x01 if bool(val) else 0x00示例14: set_watchdog
def set_watchdog(self, val):
val = Utils.to_bool(val)
self.msr &= 0x7f
self.msr |= 0x80 if not bool(val) else 0x00示例15: set_xram
def set_xram(self, val):
val = Utils.to_bool(val)
self.msr &= 0xbf
self.msr |= 0x40 if bool(val) else 0x00