Python siteUtils.getUnitId函数代码示例

def getSensorGains(jobname='fe55_analysis', sensor_id=None):
    if sensor_id is None:
        sensor_id = siteUtils.getUnitId()
    try:
        gain_file = dependency_glob('%s_eotest_results.fits' % sensor_id,
                                    jobname=jobname)[0]
    except IndexError:
        raise RuntimeError('eotestUtils.getSensorGains: %s %s'
                           % (sensor_id, jobname))
    data = sensorTest.EOTestResults(gain_file)
    amps = data['AMP']
    gains = data['GAIN']
    sensorGains = dict([(amp, gains[amp-1]) for amp in amps])
    return sensorGains

    def __init__(self, configFile):
        """
        configFile contains the names of the site-specific
        configuration files.  File basenames are provided in
        configFile, and the full paths are constructed in the
        _read(...) method.
        """
        super(CcsSetup, self).__init__()
        if os.environ.has_key('CCS_TS'):
            self['ts']=_quote(os.getenv('CCS_TS'))
        else:
            self['ts'] = _quote('ts')
        self['tsCWD'] = _quote(os.getcwd())
        self['labname'] = _quote(siteUtils.getSiteName())
        self['CCDID'] = _quote(siteUtils.getUnitId())
#        self._read(os.path.join(siteUtils.getJobDir(), configFile))
        CCDTYPE = _quote(siteUtils.getUnitType())

def aggregate_filerefs(producer, testtype, origin=None, dp_mapping=None):
    """
    Aggregate the filerefs for the metrology data products and return
    them as a python list.
    """
    if origin is None:
        origin = siteUtils.getSiteName()

    if dp_mapping is None:
        dp_mapping = dict(BOXPLOT='boxplot',
                          HISTOGRAM='hist',
                          POINT_CLOUD_10='point_cloud_azim_10',
                          POINT_CLOUD_45='point_cloud_azim_45',
                          RESIDUALS='residuals',
                          QUANTILE_TABLE='quantile_table')

    # Common metadata fields for all data products.
    ccd_vendor = siteUtils.getCcdVendor()
    sensor_id = siteUtils.getUnitId()
    md = siteUtils.DataCatalogMetadata(CCD_MANU=ccd_vendor,
                                       LSST_NUM=sensor_id,
                                       PRODUCER=producer,
                                       ORIGIN=origin,
                                       TESTTYPE=testtype,
                                       TEST_CATEGORY='MET')

    # Create filerefs for each data product, adding the file-specific
    # data product metadata.
    tt_ext = testtype.lower()
    results = []
    for dp, ext in dp_mapping.items():
        pattern = '%(sensor_id)s_%(tt_ext)s_*%(ext)s.*'% locals()
        dp_files = glob.glob(pattern)
        results.extend([lcatr.schema.fileref.make(dp_file,
                                                  metadata=md(DATA_PRODUCT=dp))
                        for dp_file in dp_files])

    return results

#!/usr/bin/env python
import glob
import pyfits
import numpy as np
import lsst.eotest.sensor as sensorTest
import lcatr.schema
import siteUtils
import eotestUtils

sensor_id = siteUtils.getUnitId()

# Save the output file from producer script.
persistence_file = '%(sensor_id)s_persistence.fits' % locals()
eotestUtils.addHeaderData(persistence_file, LSST_NUM=sensor_id,
                          TESTTYPE='PERSISTENCE',
                          DATE=eotestUtils.utc_now_isoformat(),
                          CCD_MANU=siteUtils.getCcdVendor().upper())

results = [lcatr.schema.fileref.make(persistence_file)]

# Save the deferred charge for each amplifier from the first post-flat
# dark frame as the image persistence metric.
#
# Read the results from the FITS file.
persistence = pyfits.open(persistence_file)
times = persistence[1].data.field('TIME')

# Times of dark frames are relative to the MJD-OBS of the flat.
post_flat_times = times[np.where(times > 0)]
index = np.where(times == min(post_flat_times))[0][0]

#!/usr/bin/env python
import os, sys, glob
import siteUtils

print "executing producer_test_job.py"

IRODS = False

uid = siteUtils.getUnitId()
print "Running ASPIC PRODUCER on ", uid
uid = uid.split("LCA-11721-ASPIC-")[1]
uid = uid.replace("P", "0")

if not IRODS:
    basedir = "/sps/lsst/DataBE/ASPIC_production"
    logdir = os.path.join(basedir, "Logs")
    chipdir = os.path.join(basedir, "CHIP%s" % uid)
    try:
        input_file = os.environ["ASPIC_LOGFILE"]
    except KeyError:
        try:
            input_file = glob.glob(os.path.join(logdir, "log-%s-*.txt" % uid))[0]
        except:
            raise Exception("Input file %s not found in %s" % ("log-%s-*.txt" % uid, logdir))
    os.system("cp %s ." % input_file)
    os.system("ln -s %s ." % chipdir)
else:
    basedir = "/lsst-fr/home/lsstcamera/ASPIC_production"
    logdir = os.path.join(basedir, "Logs")
    chipdir = os.path.join(basedir, "CHIP%s" % uid)
    input_file = os.environ["ASPIC_LOGFILE"]

    def __init__(self, configFile):
        """
        configFile contains the names of the site-specific
        configuration files.  File basenames are provided in
        configFile, and the full paths are constructed in the
        _read(...) method.
        """
        super(CcsSetup, self).__init__()
        if os.environ.has_key('CCS_TS8'):
            self['ts8']=_quote(os.getenv('CCS_TS8'))
        else:
            self['ts8'] = _quote('ts8')
        if os.environ.has_key('CCS_JYTH'):
            self['jyth']=_quote(os.getenv('CCS_JYTH'))
        else:
            self['jyth'] = _quote('JythonInterpreterConsole')
        if os.environ.has_key('CCS_JSON_PORT'):
            self['jsonport']=os.getenv('CCS_JSON_PORT')
        else:
            self['jsonport'] = 4444
        if os.environ.has_key('CCS_PS'):
            self['ps']=_quote(os.getenv('CCS_PS'))
        else:
            self['ps'] = _quote('ccs-rebps')
        if os.environ.has_key('CCS_TS'):
            self['ts']=_quote(os.getenv('CCS_TS'))
        else:
            self['ts'] = _quote('ts')
        if os.environ.has_key('CCS_ARCHON'):
            self['archon']=_quote(os.getenv('CCS_ARCHON'))
        else:
            self['archon'] = _quote('archon')
        if os.environ.has_key('CCS_VAC_OUTLET'):
            self['vac_outlet']=os.getenv('CCS_VAC_OUTLET')
# there is no default for vac_outlet - if there is a script that needs
# it and it has not been defined then I want it to crash
        if os.environ.has_key('CCS_CRYO_OUTLET'):
            self['cryo_outlet']=os.getenv('CCS_CRYO_OUTLET')
# there is no default for cryo_outlet - if there is a script that needs
# it and it has not been defined then I want it to crash
        if os.environ.has_key('CCS_PUMP_OUTLET'):
            self['pump_outlet']=os.getenv('CCS_PUMP_OUTLET')
# there is no default for pump_outlet - if there is a script that needs
# it and it has not been defined then I want it to crash
        self['tsCWD'] = _quote(os.getcwd())
        self['labname'] = _quote(siteUtils.getSiteName())
        self['jobname'] = _quote(siteUtils.getJobName())
        self['CCDID'] = _quote(siteUtils.getUnitId())
        self['UNITID'] = _quote(siteUtils.getUnitId())
        self['LSSTID'] = _quote(siteUtils.getLSSTId())

        unitid = siteUtils.getUnitId()
        CCDTYPE = _quote(siteUtils.getUnitType())
        ccdnames = {}
        ccdmanunames = {}
        ccdnames,ccdmanunames = siteUtils.getCCDNames()

        print "retrieved the following LSST CCD names list"
        print ccdnames
        print "retrieved the following Manufacturers CCD names list"
        print ccdmanunames
        for slot in ccdnames :
            print "CCD %s is in slot %s" % (ccdnames[slot],slot)
            self['CCD%s'%slot] = _quote(ccdnames[slot])
            if 'itl' in ccdnames[slot].lower() :
                CCDTYPE = 'itl'
            if 'e2v' in ccdnames[slot].lower() :
                CCDTYPE = 'e2v'
        for slot in ccdmanunames :
            print "CCD %s is in slot %s" % (ccdmanunames[slot],slot)
            self['CCDMANU%s'%slot] = _quote(ccdmanunames[slot])
        try:
            self['RUNNUM'] = _quote(siteUtils.getRunNumber())
        except:
            self['RUNNUM'] = "no_lcatr_run_number"
            pass
        self._read(os.path.join(siteUtils.getJobDir(), configFile))

        print "CCDTYPE = %s" % CCDTYPE
        self['sequence_file'] = _quote("NA")
        self['acffile'] = self['itl_acffile']
# set default type
        self['CCSCCDTYPE'] = _quote("ITL")
        if ("RTM" in unitid.upper() or "ETU" in unitid.upper() or "RSA" in unitid.upper()) :
            if ("e2v" in CCDTYPE) :
                self['CCSCCDTYPE'] = _quote("E2V")
                self['acffile'] = self['e2v_acffile']
                self['sequence_file'] = self['e2v_seqfile']
            else :
                self['CCSCCDTYPE'] = _quote("ITL")
                self['acffile'] = self['itl_acffile']
                self['sequence_file'] = self['itl_seqfile']
            os.system("export | grep -i seq")
            seqdir = ""
            if os.environ.has_key('SEQUENCERFILESDIR') :
                seqdir = os.getenv('SEQUENCERFILESDIR')
                print "seqdir=",seqdir
                self['sequence_file'] = self['sequence_file'].replace('${SEQUENCERFILESDIR}',seqdir)
            os.system("cp -vp %s %s" % (self['sequence_file'],self['tsCWD']))

#.........这里部分代码省略.........

#!/usr/bin/env python
import sys
import os
import siteUtils
import metUtils
from flatnessTask import flatnessTask

raft_id = siteUtils.getUnitId()

# Find the TS5 metrology scan data by constructing the name of the data-taking step
acqjobname = siteUtils.getJobName().replace('_Analysis', '')
if ("Room_Temp_Measurement" in acqjobname and not "After" in acqjobname):
    acqjobname = "Pump_and_" + acqjobname

print('flatness_ts5:')
print(acqjobname)
print(siteUtils.getProcessName(acqjobname))
print('----')

# siteUtils returns a list with one member;
# here take the first (and only) member
infile = siteUtils.dependency_glob('*.csv',
                                   jobname=siteUtils.getProcessName(acqjobname),
                                   description='')[0]
print "infile = %s" % infile

flatnessTask(raft_id, infile, dtype='TS5', pickle_file='flatness_ts5.pickle')

    for k in rsp:
        print ('For key %s returned value is %s\n' % (k, rsp[k]) )

#    sys.exit(0)
except Exception,msg:
    print 'Operation failed with exception: '
    print  msg
    sys.exit(1)


rsp = []
try:
#    rsp = conn.getHardwareHierarchy(experimentSN='LCA-10753_RSA-002_CTE_ETU',
#                                      htype='LCA-10753_RSA',
#                                      noBatched='false')
    rsp = conn.getHardwareHierarchy(experimentSN=siteUtils.getUnitId(),
                                      htype=siteUtils.getUnitType(),
                                      noBatched='false')
    print "Results from getHardwareHierarchy unfiltered:"
    iDict = 0
    for d in rsp:
        print('Examining array element %d' % (iDict))
        isaccd = False
        ccd_sn = ""
        ccd_slot = ""
        ccd_htype = ""
        got_manu_info = False
        for k in d:
            if "ccd" in k.lower() :
                print('For key {0} value is {1}'.format(k, d[k]))
                if ('child_hardwareTypeName value' in k and ('itl-ccd' in d[k].lower() or 'e2v-ccd' in d[k].lower()) ) :

                            value is not None and
                            wl >= wl_range[0] and 
                            wl <= wl_range[1]):
                            qe_results[band].append(value)
        results = []
        for band in qe_results:
            results.append(validate(job, band=band,
                                    QE=np.average(qe_results[band])))
        return results
    def metrology(self):
        return []

if __name__ == '__main__':
    results = [siteUtils.packageVersions()]

    lsstnum = siteUtils.getUnitId()

    vendorDataDir = os.readlink('vendorData')
    print 'Vendor data location:', vendorDataDir

    if siteUtils.getCcdVendor() == 'ITL':
        vendor = ItlResults(vendorDataDir)
        translator = ItlFitsTranslator(lsstnum, vendorDataDir, '.')
    else:
        vendor = e2vResults(vendorDataDir)
        translator = e2vFitsTranslator(lsstnum, vendorDataDir, '.')

    results.extend(vendor.run_all())

    translator.run_all()
    results.extend([lcatr.schema.fileref.make(x) for x in translator.outfiles])

#!/usr/bin/env python
import glob
import lcatr.schema
import siteUtils
import metUtils
from MetrologyData import md_factory

producer = 'SR-MET-07'
testtype = 'FLATNESS'

results = metUtils.aggregate_filerefs_ts5(producer, testtype)

# Add the QA plot to the results
raft_id = siteUtils.getUnitId()
qafile = glob.glob('*_qa_plot.png')[0]
#print('qafile:  %s' % qafile)
#print('raft_id:  %s' % raft_id)

md = siteUtils.DataCatalogMetadata(CCD_MANU=siteUtils.getCcdVendor(),
                                   LSST_NUM=siteUtils.getUnitId(),
                                   PRODUCER=producer,
                                   ORIGIN=siteUtils.getSiteName(),
                                   TESTTYPE=testtype,
                                   TEST_CATEGORY='MET')

results.extend([lcatr.schema.fileref.make(qafile, metadata=md(DATA_PRODUCT='QA_PLOT'))])

raftData = md_factory.load('flatness_ts5_delta.pickle')
peak_valley_95 = raftData.quantiles['0.975'] - raftData.quantiles['0.025']
peak_valley_100 = raftData.quantiles['1.000'] - raftData.quantiles['0.000']