Python PlotWindow.getYAxis方法代码示例

# 需要导入模块: from silx.gui.plot import PlotWindow [as 别名]
# 或者: from silx.gui.plot.PlotWindow import getYAxis [as 别名]
class TestPlotWindow(TestCaseQt):
    """Base class for tests of PlotWindow."""

    def setUp(self):
        super(TestPlotWindow, self).setUp()
        self.plot = PlotWindow()
        self.plot.show()
        self.qWaitForWindowExposed(self.plot)

    def tearDown(self):
        self.plot.setAttribute(qt.Qt.WA_DeleteOnClose)
        self.plot.close()
        del self.plot
        super(TestPlotWindow, self).tearDown()

    def testActions(self):
        """Test the actions QToolButtons"""
        self.plot.setLimits(1, 100, 1, 100)

        checkList = [  # QAction, Plot state getter
            (self.plot.xAxisAutoScaleAction, self.plot.getXAxis().isAutoScale),
            (self.plot.yAxisAutoScaleAction, self.plot.getYAxis().isAutoScale),
            (self.plot.xAxisLogarithmicAction, self.plot.getXAxis()._isLogarithmic),
            (self.plot.yAxisLogarithmicAction, self.plot.getYAxis()._isLogarithmic),
            (self.plot.gridAction, self.plot.getGraphGrid),
        ]

        for action, getter in checkList:
            self.mouseMove(self.plot)
            initialState = getter()
            toolButton = getQToolButtonFromAction(action)
            self.assertIsNot(toolButton, None)
            self.mouseClick(toolButton, qt.Qt.LeftButton)
            self.assertNotEqual(getter(), initialState,
                                msg='"%s" state not changed' % action.text())

            self.mouseClick(toolButton, qt.Qt.LeftButton)
            self.assertEqual(getter(), initialState,
                             msg='"%s" state not changed' % action.text())

        # Trigger a zoom reset
        self.mouseMove(self.plot)
        resetZoomAction = self.plot.resetZoomAction
        toolButton = getQToolButtonFromAction(resetZoomAction)
        self.assertIsNot(toolButton, None)
        self.mouseClick(toolButton, qt.Qt.LeftButton)

    def testToolAspectRatio(self):
        self.plot.toolBar()
        self.plot.keepDataAspectRatioButton.keepDataAspectRatio()
        self.assertTrue(self.plot.isKeepDataAspectRatio())
        self.plot.keepDataAspectRatioButton.dontKeepDataAspectRatio()
        self.assertFalse(self.plot.isKeepDataAspectRatio())

    def testToolYAxisOrigin(self):
        self.plot.toolBar()
        self.plot.yAxisInvertedButton.setYAxisUpward()
        self.assertFalse(self.plot.getYAxis().isInverted())
        self.plot.yAxisInvertedButton.setYAxisDownward()
        self.assertTrue(self.plot.getYAxis().isInverted())

# 需要导入模块: from silx.gui.plot import PlotWindow [as 别名]
# 或者: from silx.gui.plot.PlotWindow import getYAxis [as 别名]
toolbar = qt.QToolBar("My toolbar")
plotwin.addToolBar(toolbar)

myaction = FftAction(plotwin)
toolbar.addAction(myaction)

# x range: 0 -- 10 (1000 points)
x = numpy.arange(1000) * 0.01

twopi = 2 * numpy.pi
# Sum of sine functions with frequencies 3, 20 and 42 Hz
y1 = numpy.sin(twopi * 3 * x) + 1.5 * numpy.sin(twopi * 20 * x) + 2 * numpy.sin(twopi * 42 * x)
# Cosine with frequency 7 Hz and phase pi / 3
y2 = numpy.cos(twopi * 7 * (x - numpy.pi / 3))
# 5 periods of square wave, amplitude 2
y3 = numpy.zeros_like(x)
for i in [0, 2, 4, 6, 8]:
    y3[i * len(x) // 10:(i + 1) * len(x) // 10] = 2

plotwin.addCurve(x, y1, legend="sin")
plotwin.addCurve(x, y2, legend="cos")
plotwin.addCurve(x, y3, legend="square wave")

plotwin.setGraphTitle("Original data")
plotwin.getYAxis().setLabel("amplitude")
plotwin.getXAxis().setLabel("time")

plotwin.show()
app.exec_()
sys.excepthook = sys.__excepthook__

# 需要导入模块: from silx.gui.plot import PlotWindow [as 别名]
# 或者: from silx.gui.plot.PlotWindow import getYAxis [as 别名]

#.........这里部分代码省略.........
        self.assertIsNotNone(self.profile.getProfileValues())
        points = self.profile.getProfilePoints()
        self.assertEqual(len(points), nPoints)

        # Check that profile has same limits than Plot
        xLimits = self.plot.getXAxis().getLimits()
        self.assertEqual(points[0, 0], xLimits[0])
        self.assertEqual(points[-1, 0], xLimits[1])

        # Clear the profile
        clearAction = self.profile.actions()[-1]
        clearAction.trigger()
        self.qapp.processEvents()

        self.assertIsNone(self.profile.getProfileValues())
        self.assertIsNone(self.profile.getProfilePoints())
        self.assertEqual(self.profile.getProfileTitle(), '')

    def testVerticalProfile(self):
        """Test ScatterProfileToolBar vertical profile"""
        nPoints = 8
        self.profile.setNPoints(nPoints)
        self.assertEqual(self.profile.getNPoints(), nPoints)

        # Add a scatter plot
        self.plot.addScatter(
            x=(0., 1., 1., 0.), y=(0., 0., 1., 1.), value=(0., 1., 2., 3.))
        self.plot.resetZoom(dataMargins=(.1, .1, .1, .1))
        self.qapp.processEvents()

        # Activate vertical profile
        vlineAction = self.profile.actions()[1]
        vlineAction.trigger()
        self.qapp.processEvents()

        # Set a ROI profile
        roi = roi_items.VerticalLineROI()
        roi.setPosition(0.5)
        self.profile._getRoiManager().addRoi(roi)

        # Wait for async interpolator init
        for _ in range(10):
            self.qWait(200)
            if not self.profile.hasPendingOperations():
                break

        self.assertIsNotNone(self.profile.getProfileValues())
        points = self.profile.getProfilePoints()
        self.assertEqual(len(points), nPoints)

        # Check that profile has same limits than Plot
        yLimits = self.plot.getYAxis().getLimits()
        self.assertEqual(points[0, 1], yLimits[0])
        self.assertEqual(points[-1, 1], yLimits[1])

        # Check that profile limits are updated when changing limits
        self.plot.getYAxis().setLimits(yLimits[0] + 1, yLimits[1] + 10)
        self.qapp.processEvents()
        yLimits = self.plot.getYAxis().getLimits()
        points = self.profile.getProfilePoints()
        self.assertEqual(points[0, 1], yLimits[0])
        self.assertEqual(points[-1, 1], yLimits[1])

        # Clear the plot
        self.plot.clear()
        self.qapp.processEvents()
        self.assertIsNone(self.profile.getProfileValues())
        self.assertIsNone(self.profile.getProfilePoints())

    def testLineProfile(self):
        """Test ScatterProfileToolBar line profile"""
        nPoints = 8
        self.profile.setNPoints(nPoints)
        self.assertEqual(self.profile.getNPoints(), nPoints)

        # Activate line profile
        lineAction = self.profile.actions()[2]
        lineAction.trigger()
        self.qapp.processEvents()

        # Add a scatter plot
        self.plot.addScatter(
            x=(0., 1., 1., 0.), y=(0., 0., 1., 1.), value=(0., 1., 2., 3.))
        self.plot.resetZoom(dataMargins=(.1, .1, .1, .1))
        self.qapp.processEvents()

        # Set a ROI profile
        roi = roi_items.LineROI()
        roi.setEndPoints(numpy.array([0., 0.]), numpy.array([1., 1.]))
        self.profile._getRoiManager().addRoi(roi)

        # Wait for async interpolator init
        for _ in range(10):
            self.qWait(200)
            if not self.profile.hasPendingOperations():
                break

        self.assertIsNotNone(self.profile.getProfileValues())
        points = self.profile.getProfilePoints()
        self.assertEqual(len(points), nPoints)