Python QFrame.setFrameShadow方法代码示例

# 需要导入模块: from qtpy.QtWidgets import QFrame [as 别名]
# 或者: from qtpy.QtWidgets.QFrame import setFrameShadow [as 别名]
        def setup_grain_design():
            # grain table view
            master = QHBoxLayout(self)
            master.addWidget(QTableView())

            # grain design controls
            controls = QVBoxLayout(self)
            # add a push button
            self.btn_new_grain = QPushButton(self.tr("New Grain"))
            self.btn_new_grain.setMinimumHeight(50)
            controls.addWidget(self.btn_new_grain)

            # add a dividing line
            line = QFrame()
            line.setFrameShape(QFrame.HLine)
            line.setFrameShadow(QFrame.Sunken)
            controls.addSpacing(5)
            controls.addWidget(line)

            # rest of the controls buttons
            self.btn_edit_grain = QPushButton(self.tr("Edit"))
            self.btn_edit_grain.setMinimumHeight(30)
            controls.addWidget(self.btn_edit_grain)
            self.btn_delete_Grain = QPushButton(self.tr("Delete"))
            self.btn_delete_Grain.setMinimumHeight(30)
            controls.addWidget(self.btn_delete_Grain)

            # move grain up and down
            moveup = QHBoxLayout()
            self.btn_move_up = QToolButton()
            self.btn_move_up.setArrowType(Qt.UpArrow)
            moveup.addWidget(self.btn_move_up)
            moveup.addWidget(QLabel(self.tr("Move Up")))
            controls.addLayout(moveup)

            movedown = QHBoxLayout()
            self.btn_move_down = QToolButton()
            self.btn_move_down.setArrowType(Qt.DownArrow)
            movedown.addWidget(self.btn_move_down)
            movedown.addWidget(QLabel(self.tr("Move Down")))
            controls.addLayout(movedown)
            controls.addStretch()

            # add info for motor design
            fl_propellant_info = QFormLayout()
            gb_motor_info = QGroupBox(self.tr("Propellant Info"))
            gb_motor_info.setLayout(fl_propellant_info)

            self.lbl_num_grains = QLabel()
            fl_propellant_info.addRow(QLabel(self.tr("Number of Segments:")), self.lbl_num_grains)
            self.lbl_motor_dia = QLabel()
            fl_propellant_info.addRow(QLabel(self.tr("Motor Diameter:")), self.lbl_motor_dia)
            self.lbl_motor_len = QLabel()
            fl_propellant_info.addRow(QLabel(self.tr("Propellant Length:")), self.lbl_motor_len)
            self.lbl_prop_mass = QLabel()
            fl_propellant_info.addRow(QLabel(self.tr("Propellant Mass:")), self.lbl_prop_mass)
            self.lbl_volume_loading = QLabel()
            fl_propellant_info.addRow(QLabel(self.tr("Volume Loading:")), self.lbl_volume_loading)

            # set group box's layout
            controls.addWidget(gb_motor_info)

            # setup master layout
            master.addLayout(controls)
            self.gb_design = QGroupBox(self.tr("Grain Design"))
            self.gb_design.setLayout(master)

# 需要导入模块: from qtpy.QtWidgets import QFrame [as 别名]
# 或者: from qtpy.QtWidgets.QFrame import setFrameShadow [as 别名]
    def __init__(self, parent=None):
        QWidget.__init__(self, parent)

        self.dir = None
        self.runconf = RunConfiguration()
        firstrun_o = CONF.get('run', ALWAYS_OPEN_FIRST_RUN_OPTION, False)

        # --- Interpreter ---
        interpreter_group = QGroupBox(_("Console"))
        interpreter_layout = QVBoxLayout()
        interpreter_group.setLayout(interpreter_layout)

        self.current_radio = QRadioButton(CURRENT_INTERPRETER)
        interpreter_layout.addWidget(self.current_radio)

        self.dedicated_radio = QRadioButton(DEDICATED_INTERPRETER)
        interpreter_layout.addWidget(self.dedicated_radio)

        self.systerm_radio = QRadioButton(SYSTERM_INTERPRETER)
        interpreter_layout.addWidget(self.systerm_radio)

        # --- General settings ----
        common_group = QGroupBox(_("General settings"))
        common_layout = QGridLayout()
        common_group.setLayout(common_layout)

        self.clear_var_cb = QCheckBox(CLEAR_ALL_VARIABLES)
        common_layout.addWidget(self.clear_var_cb, 0, 0)

        self.post_mortem_cb = QCheckBox(POST_MORTEM)
        common_layout.addWidget(self.post_mortem_cb, 1, 0)

        self.clo_cb = QCheckBox(_("Command line options:"))
        common_layout.addWidget(self.clo_cb, 2, 0)
        self.clo_edit = QLineEdit()
        self.clo_cb.toggled.connect(self.clo_edit.setEnabled)
        self.clo_edit.setEnabled(False)
        common_layout.addWidget(self.clo_edit, 2, 1)

        # --- Working directory ---
        wdir_group = QGroupBox(_("Working Directory settings"))
        wdir_layout = QVBoxLayout()
        wdir_group.setLayout(wdir_layout)

        self.file_dir_radio = QRadioButton(FILE_DIR)
        wdir_layout.addWidget(self.file_dir_radio)

        self.cwd_radio = QRadioButton(CW_DIR)
        wdir_layout.addWidget(self.cwd_radio)

        fixed_dir_layout = QHBoxLayout()
        self.fixed_dir_radio = QRadioButton(FIXED_DIR)
        fixed_dir_layout.addWidget(self.fixed_dir_radio)
        self.wd_edit = QLineEdit()
        self.fixed_dir_radio.toggled.connect(self.wd_edit.setEnabled)
        self.wd_edit.setEnabled(False)
        fixed_dir_layout.addWidget(self.wd_edit)
        browse_btn = QPushButton(ima.icon('DirOpenIcon'), '', self)
        browse_btn.setToolTip(_("Select directory"))
        browse_btn.clicked.connect(self.select_directory)
        fixed_dir_layout.addWidget(browse_btn)
        wdir_layout.addLayout(fixed_dir_layout)

        # --- System terminal ---
        external_group = QGroupBox(_("External system terminal"))
        external_group.setDisabled(True)

        self.systerm_radio.toggled.connect(external_group.setEnabled)

        external_layout = QGridLayout()
        external_group.setLayout(external_layout)
        self.interact_cb = QCheckBox(INTERACT)
        external_layout.addWidget(self.interact_cb, 1, 0, 1, -1)

        self.pclo_cb = QCheckBox(_("Command line options:"))
        external_layout.addWidget(self.pclo_cb, 3, 0)
        self.pclo_edit = QLineEdit()
        self.pclo_cb.toggled.connect(self.pclo_edit.setEnabled)
        self.pclo_edit.setEnabled(False)
        self.pclo_edit.setToolTip(_("<b>-u</b> is added to the "
                                    "other options you set here"))
        external_layout.addWidget(self.pclo_edit, 3, 1)

        # Checkbox to preserve the old behavior, i.e. always open the dialog
        # on first run
        hline = QFrame()
        hline.setFrameShape(QFrame.HLine)
        hline.setFrameShadow(QFrame.Sunken)
        self.firstrun_cb = QCheckBox(ALWAYS_OPEN_FIRST_RUN % _("this dialog"))
        self.firstrun_cb.clicked.connect(self.set_firstrun_o)
        self.firstrun_cb.setChecked(firstrun_o)

        layout = QVBoxLayout()
        layout.addWidget(interpreter_group)
        layout.addWidget(common_group)
        layout.addWidget(wdir_group)
        layout.addWidget(external_group)
        layout.addWidget(hline)
        layout.addWidget(self.firstrun_cb)
        self.setLayout(layout)

# 需要导入模块: from qtpy.QtWidgets import QFrame [as 别名]
# 或者: from qtpy.QtWidgets.QFrame import setFrameShadow [as 别名]
    def __init__(self, parent=None):
        QWidget.__init__(self, parent)

        self.current_radio = None
        self.dedicated_radio = None
        self.systerm_radio = None

        self.runconf = RunConfiguration()

        firstrun_o = CONF.get("run", ALWAYS_OPEN_FIRST_RUN_OPTION, False)

        # --- General settings ----
        common_group = QGroupBox(_("General settings"))
        common_layout = QGridLayout()
        common_group.setLayout(common_layout)
        self.clo_cb = QCheckBox(_("Command line options:"))
        common_layout.addWidget(self.clo_cb, 0, 0)
        self.clo_edit = QLineEdit()
        self.clo_cb.toggled.connect(self.clo_edit.setEnabled)
        self.clo_edit.setEnabled(False)
        common_layout.addWidget(self.clo_edit, 0, 1)
        self.wd_cb = QCheckBox(_("Working directory:"))
        common_layout.addWidget(self.wd_cb, 1, 0)
        wd_layout = QHBoxLayout()
        self.wd_edit = QLineEdit()
        self.wd_cb.toggled.connect(self.wd_edit.setEnabled)
        self.wd_edit.setEnabled(False)
        wd_layout.addWidget(self.wd_edit)
        browse_btn = QPushButton(ima.icon("DirOpenIcon"), "", self)
        browse_btn.setToolTip(_("Select directory"))
        browse_btn.clicked.connect(self.select_directory)
        wd_layout.addWidget(browse_btn)
        common_layout.addLayout(wd_layout, 1, 1)
        self.post_mortem_cb = QCheckBox(_("Enter debugging mode when " "errors appear during execution"))
        common_layout.addWidget(self.post_mortem_cb)

        # --- Interpreter ---
        interpreter_group = QGroupBox(_("Console"))
        interpreter_layout = QVBoxLayout()
        interpreter_group.setLayout(interpreter_layout)
        self.current_radio = QRadioButton(CURRENT_INTERPRETER)
        interpreter_layout.addWidget(self.current_radio)
        self.dedicated_radio = QRadioButton(DEDICATED_INTERPRETER)
        interpreter_layout.addWidget(self.dedicated_radio)
        self.systerm_radio = QRadioButton(SYSTERM_INTERPRETER)
        interpreter_layout.addWidget(self.systerm_radio)

        # --- Dedicated interpreter ---
        new_group = QGroupBox(_("Dedicated Python console"))
        self.current_radio.toggled.connect(new_group.setDisabled)
        new_layout = QGridLayout()
        new_group.setLayout(new_layout)
        self.interact_cb = QCheckBox(_("Interact with the Python " "console after execution"))
        new_layout.addWidget(self.interact_cb, 1, 0, 1, -1)

        self.show_kill_warning_cb = QCheckBox(_("Show warning when killing" " running process"))

        new_layout.addWidget(self.show_kill_warning_cb, 2, 0, 1, -1)
        self.pclo_cb = QCheckBox(_("Command line options:"))
        new_layout.addWidget(self.pclo_cb, 3, 0)
        self.pclo_edit = QLineEdit()
        self.pclo_cb.toggled.connect(self.pclo_edit.setEnabled)
        self.pclo_edit.setEnabled(False)
        self.pclo_edit.setToolTip(_("<b>-u</b> is added to the " "other options you set here"))
        new_layout.addWidget(self.pclo_edit, 3, 1)

        # Checkbox to preserve the old behavior, i.e. always open the dialog
        # on first run
        hline = QFrame()
        hline.setFrameShape(QFrame.HLine)
        hline.setFrameShadow(QFrame.Sunken)
        self.firstrun_cb = QCheckBox(ALWAYS_OPEN_FIRST_RUN % _("this dialog"))
        self.firstrun_cb.clicked.connect(self.set_firstrun_o)
        self.firstrun_cb.setChecked(firstrun_o)

        layout = QVBoxLayout()
        layout.addWidget(interpreter_group)
        layout.addWidget(common_group)
        layout.addWidget(new_group)
        layout.addWidget(hline)
        layout.addWidget(self.firstrun_cb)
        self.setLayout(layout)