Python ModbusDeviceIdentification.ProductName方法代码示例

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
def run_dbstore_update_server():
    # ----------------------------------------------------------------------- #
    # initialize your data store
    # ----------------------------------------------------------------------- #

    block = ModbusSequentialDataBlock(0x00, [0] * 0xff)
    store = SqlSlaveContext(block)

    context = ModbusServerContext(slaves={1: store}, single=False)

    # ----------------------------------------------------------------------- #
    # initialize the server information
    # ----------------------------------------------------------------------- #
    identity = ModbusDeviceIdentification()
    identity.VendorName = 'pymodbus'
    identity.ProductCode = 'PM'
    identity.VendorUrl = 'http://github.com/bashwork/pymodbus/'
    identity.ProductName = 'pymodbus Server'
    identity.ModelName = 'pymodbus Server'
    identity.MajorMinorRevision = '2.2.0'

    # ----------------------------------------------------------------------- #
    # run the server you want
    # ----------------------------------------------------------------------- #
    time = 5  # 5 seconds delay
    loop = LoopingCall(f=updating_writer, a=(context,))
    loop.start(time, now=False)  # initially delay by time
    loop.stop()
    StartTcpServer(context, identity=identity, address=("", 5020))

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
def ServerThread(e):
	global server
	# Configure the service logging
	#import logging
	#logging.basicConfig()
	#log = logging.getLogger()
	#log.setLevel(logging.DEBUG)

	# Initialize your data store
	store = ModbusSlaveContext(
		di = ModbusSequentialDataBlock(0, [17]*100),
		co = ModbusSequentialDataBlock(0, [17]*100),
		hr = ModbusSequentialDataBlock(0, [17]*100),
		ir = ModbusSequentialDataBlock(0, [17]*100))
	context = ModbusServerContext(slaves=store, single=True)
	 
	# Initialize the server information
	identity = ModbusDeviceIdentification()
	identity.VendorName  = 'Pymodbus'
	identity.ProductCode = 'PM'
	identity.VendorUrl   = 'http://github.com/bashwork/pymodbus/'
	identity.ProductName = 'Pymodbus Server'
	identity.ModelName   = 'Pymodbus Server'
	identity.MajorMinorRevision = '1.0'


	# Run the server 
	# StartTcpServer(context, identity=identity, address=(args.ip, 502))
	server = ModbusTcpServer(context, identity=identity, address=(ip, 502))
	print 'Server started'
	server.serve_forever(0.1)
	print 'Server stopped'

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
def modbus_master(module, properties):
    log.debug('Modbus master module : '  + str(module))
    # Modbus Master
    #--------------------------------------------------------------------------#
    # initialize your data store
    #--------------------------------------------------------------------------#
    store = ModbusSlaveContext(
        co = ModbusSequentialDataBlock(0, [0]*100),
        hr = ModbusSequentialDataBlock(0, [0]*100))
    context = ModbusServerContext(slaves=store, single=True)

    #--------------------------------------------------------------------------#
    # initialize the server information
    #--------------------------------------------------------------------------#
    identity = ModbusDeviceIdentification()
    identity.VendorName  = 'ASO+AKO'
    identity.ProductCode = 'DYODE'
    identity.VendorUrl   = 'yoloswag'
    identity.ProductName = 'DYODE'
    identity.ModelName   = 'BSides LV release'
    identity.MajorMinorRevision = '0.9'

    #--------------------------------------------------------------------------#
    # run the server you want
    #--------------------------------------------------------------------------#
    time = 1 # 5 seconds delay
    loop = LoopingCall(f=modbus_master_update, a=(module, properties, context))
    loop.start(time, now=False) # initially delay by time
    StartTcpServer(context, identity=identity, address=("0.0.0.0", \
                   properties['port_out']))

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
def main():
	
	store = ModbusSlaveContext(
		di = ModbusSequentialDataBlock(0, [0]*100),
		co = ModbusSequentialDataBlock(0, [0]*100),
		hr = ModbusSequentialDataBlock(0, [0]*100),
		ir = ModbusSequentialDataBlock(0, [0]*100))
	context = ModbusServerContext(slaves=store, single=True)
	identity = ModbusDeviceIdentification()
	identity.VendorName  = 'pymodbus'
	identity.ProductCode = 'PM'
	identity.VendorUrl   = 'http://github.com/simplyautomationized'
	identity.ProductName = 'pymodbus Server'
	identity.ModelName   = 'pymodbus Server'
	identity.MajorMinorRevision = '1.0'
	time = 5 # 5 seconds delaytime = 5 # 5 seconds delay
	writer = LoopingCall(read_context,a=(context,))
	loop = LoopingCall(updating_writer, a=(context,))
	loop.start(.5) # initially delay by time
	writer.start(.1)
	StartTcpServer(context, identity=identity)#, address=("localhost", 502))
	#cleanup async tasks
	temp.setEnabled(False)
	loop.stop()
	writer.stop()
	GPIO.cleanup()

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
def run_updating_server():
    # ----------------------------------------------------------------------- # 
    # initialize your data store
    # ----------------------------------------------------------------------- # 
    
    store = ModbusSlaveContext(
        di=ModbusSequentialDataBlock(0, [17]*100),
        co=ModbusSequentialDataBlock(0, [17]*100),
        hr=ModbusSequentialDataBlock(0, [17]*100),
        ir=ModbusSequentialDataBlock(0, [17]*100))
    context = ModbusServerContext(slaves=store, single=True)
    
    # ----------------------------------------------------------------------- # 
    # initialize the server information
    # ----------------------------------------------------------------------- # 
    identity = ModbusDeviceIdentification()
    identity.VendorName = 'pymodbus'
    identity.ProductCode = 'PM'
    identity.VendorUrl = 'http://github.com/bashwork/pymodbus/'
    identity.ProductName = 'pymodbus Server'
    identity.ModelName = 'pymodbus Server'
    identity.MajorMinorRevision = '2.2.0'
    
    # ----------------------------------------------------------------------- # 
    # run the server you want
    # ----------------------------------------------------------------------- # 
    time = 5  # 5 seconds delay
    loop = LoopingCall(f=updating_writer, a=(context,))
    loop.start(time, now=False) # initially delay by time
    StartTcpServer(context, identity=identity, address=("localhost", 5020))

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
def run_custom_db_server():
    # ----------------------------------------------------------------------- # 
    # initialize your data store
    # ----------------------------------------------------------------------- # 
    block  = CustomDataBlock([0]*100)
    store  = ModbusSlaveContext(di=block, co=block, hr=block, ir=block)
    context = ModbusServerContext(slaves=store, single=True)

    # ----------------------------------------------------------------------- #
    # initialize the server information
    # ----------------------------------------------------------------------- #

    identity = ModbusDeviceIdentification()
    identity.VendorName = 'pymodbus'
    identity.ProductCode = 'PM'
    identity.VendorUrl = 'http://github.com/bashwork/pymodbus/'
    identity.ProductName = 'pymodbus Server'
    identity.ModelName = 'pymodbus Server'
    identity.MajorMinorRevision = '2.2.0'

    # ----------------------------------------------------------------------- #
    # run the server you want
    # ----------------------------------------------------------------------- #

    # p = Process(target=device_writer, args=(queue,))
    # p.start()
    StartTcpServer(context, identity=identity, address=("localhost", 5020))

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
def identity_factory():
    identity = ModbusDeviceIdentification()
    identity.VendorName  = 'pymodbus'
    identity.ProductCode = 'PM'
    identity.VendorUrl   = 'http://github.com/andreadanzi/pymodbus/'
    identity.ProductName = 'pymodbus Pump Server'
    identity.ModelName   = 'pymodbus Pump Server'
    identity.MajorMinorRevision = '1.0'

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
def run_server():
    # ----------------------------------------------------------------------- #
    # initialize your data store
    # ----------------------------------------------------------------------- #
    store = ModbusSlaveContext()
    context = ModbusServerContext(slaves=store, single=True)
    
    # ----------------------------------------------------------------------- # 
    # initialize the server information
    # ----------------------------------------------------------------------- # 
    # If you don't set this or any fields, they are defaulted to empty strings.
    # ----------------------------------------------------------------------- # 
    identity = ModbusDeviceIdentification()
    identity.VendorName = 'Pymodbus'
    identity.ProductCode = 'PM'
    identity.VendorUrl = 'http://github.com/riptideio/pymodbus/'
    identity.ProductName = 'Pymodbus Server'
    identity.ModelName = 'Pymodbus Server'
    identity.MajorMinorRevision = '1.5'

    # ----------------------------------------------------------------------- #
    # Add an example which is long enough to force the ReadDeviceInformation
    # request / response to require multiple responses to send back all of the
    # information.
    # ----------------------------------------------------------------------- #

    identity[0x80] = "Lorem ipsum dolor sit amet, consectetur adipiscing " \
                     "elit. Vivamus rhoncus massa turpis, sit amet " \
                     "ultrices orci semper ut. Aliquam tristique sapien in " \
                     "lacus pharetra, in convallis nunc consectetur. Nunc " \
                     "velit elit, vehicula tempus tempus sed. "

    # ----------------------------------------------------------------------- #
    # Add an example with repeated object IDs. The MODBUS specification is
    # entirely silent on whether or not this is allowed. In practice, this
    # should be assumed to be contrary to the MODBUS specification and other
    # clients (other than pymodbus) might behave differently when presented
    # with an object ID occurring twice in the returned information.
    #
    # Use this at your discretion, and at the very least ensure that all
    # objects which share a single object ID can fit together within a single
    # ADU unit. In the case of Modbus RTU, this is about 240 bytes or so. In
    # other words, when the spec says "An object is indivisible, therefore
    # any object must have a size consistent with the size of transaction
    # response", if you use repeated OIDs, apply that rule to the entire
    # grouping of objects with the repeated OID.
    # ----------------------------------------------------------------------- #
    identity[0x81] = ['pymodbus {0}'.format(pymodbus_version),
                      'pyserial {0}'.format(pyserial_version)]

    # ----------------------------------------------------------------------- #
    # run the server you want
    # ----------------------------------------------------------------------- # 
    # Tcp:
    StartTcpServer(context, identity=identity, address=("localhost", 5020))

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
def run_payload_server():
    # ----------------------------------------------------------------------- #
    # build your payload
    # ----------------------------------------------------------------------- #
    builder = BinaryPayloadBuilder(byteorder=Endian.Little,
                                   wordorder=Endian.Little)
    builder.add_string('abcdefgh')
    builder.add_bits([0, 1, 0, 1, 1, 0, 1, 0])
    builder.add_8bit_int(-0x12)
    builder.add_8bit_uint(0x12)
    builder.add_16bit_int(-0x5678)
    builder.add_16bit_uint(0x1234)
    builder.add_32bit_int(-0x1234)
    builder.add_32bit_uint(0x12345678)
    builder.add_32bit_float(22.34)
    builder.add_32bit_float(-22.34)
    builder.add_64bit_int(-0xDEADBEEF)
    builder.add_64bit_uint(0x12345678DEADBEEF)
    builder.add_64bit_uint(0xDEADBEEFDEADBEED)
    builder.add_64bit_float(123.45)
    builder.add_64bit_float(-123.45)

    
    # ----------------------------------------------------------------------- #
    # use that payload in the data store
    # ----------------------------------------------------------------------- #
    # Here we use the same reference block for each underlying store.
    # ----------------------------------------------------------------------- #
    
    block = ModbusSequentialDataBlock(1, builder.to_registers())
    store = ModbusSlaveContext(di=block, co=block, hr=block, ir=block)
    context = ModbusServerContext(slaves=store, single=True)
    
    # ----------------------------------------------------------------------- #
    # initialize the server information
    # ----------------------------------------------------------------------- #
    # If you don't set this or any fields, they are defaulted to empty strings.
    # ----------------------------------------------------------------------- #
    identity = ModbusDeviceIdentification()
    identity.VendorName = 'Pymodbus'
    identity.ProductCode = 'PM'
    identity.VendorUrl = 'http://github.com/bashwork/pymodbus/'
    identity.ProductName = 'Pymodbus Server'
    identity.ModelName = 'Pymodbus Server'
    identity.MajorMinorRevision = '1.5'
    # ----------------------------------------------------------------------- #
    # run the server you want
    # ----------------------------------------------------------------------- #
    StartTcpServer(context, identity=identity, address=("localhost", 5020))

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
    def __init__(self, address, port = MODBUS_PORT):
        store = ModbusSlaveContext(
            di = ModbusSequentialDataBlock(0, [0]*100),
            co = ModbusSequentialDataBlock(0, [0]*100),
            hr = ModbusSequentialDataBlock(0, [0]*100),
            ir = ModbusSequentialDataBlock(0, [0]*100))
        
        self.context = ModbusServerContext(slaves=store, single=True)
        
        identity = ModbusDeviceIdentification()
        identity.VendorName         = 'MockPLCs'
        identity.ProductCode        = 'MP'
        identity.VendorUrl          = 'http://github.com/bashwork/pymodbus/'
        identity.ProductName        = 'MockPLC 3000'
        identity.ModelName          = 'MockPLC Ultimate'
        identity.MajorMinorRevision = '1.0'

        ModbusServerFactory.__init__(self, self.context, ModbusSocketFramer, identity)

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
def main():
    # initialize the four register types
    store = ModbusSlaveContext(
        di = ModbusSequentialDataBlock(0, [0]*100),
        co = ModbusSequentialDataBlock(0, [0]*100),
        hr = ModbusSequentialDataBlock(0, [0]*100),
        ir = ModbusSequentialDataBlock(0, [0]*100))
    context = ModbusServerContext(slaves=store, single=True)
    
    identity = ModbusDeviceIdentification()
    identity.VendorName  = 'SPARSA'
    identity.ProductCode = 'SP'
    identity.VendorUrl   = 'http://gentoocloud.com/bitchimabus'
    identity.ProductName = 'SPARSA Temperature Sensor'
    identity.ModelName   = 'SP_1337'
    identity.MajorMinorRevision = '1.0'
    pi.start()
    time = 5 # 5 seconds delaytime = 5 # 5 seconds delay
    loop = LoopingCall(f=updating_writer, a=(context,))
    loop.start(time, now=False) # initially delay by time
    StartTcpServer(context, identity=identity, address=(args.address, 502))

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
def main():
    logging.basicConfig()
    #server_log   = logging.getLogger("pymodbus.server")
    #protocol_log = logging.getLogger("pymodbus.protocol")

    """ Server launcher """
    from optparse import OptionParser

    parser = OptionParser()
    parser.add_option("-D", "--debug",
                    help="Turn on to enable tracing",
                    action="store_true", dest="debug", default=False)
    (opt, arg) = parser.parse_args()

    # enable debugging information
    if opt.debug:
        try:
            _logger.setLevel(logging.DEBUG)
        except Exception:
            print "Logging is not supported on this system"

    # Create store context
    store = ModbusSlaveContext(
    di = ModbusSequentialDataBlock(0, [17]*100),
    co = ModbusSequentialDataBlock(0, [17]*100),
    hr = ModbusSequentialDataBlock(0, [17]*100),
    ir = ModbusSequentialDataBlock(0, [17]*100))
    context = ModbusServerContext(slaves=store, single=True)

    identity = ModbusDeviceIdentification()
    identity.VendorName  = 'Pymodbus'
    identity.ProductCode = 'PM'
    identity.VendorUrl   = 'http://unipi.technology'
    identity.ProductName = 'Pymodbus Server on IOLoop'
    identity.ModelName   = 'Pymodbus Server'
    identity.MajorMinorRevision = '1.0'

    StartTcpServer(context, identity=identity, address=("localhost", 5020)) 

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
#########################################
# Modbus Server Code
#########################################

store = ModbusSlaveContext(
    di = ModbusSequentialDataBlock(0, [0]*100),
    co = ModbusSequentialDataBlock(0, [0]*100),
    hr = ModbusSequentialDataBlock(0, [0]*100),
    ir = ModbusSequentialDataBlock(0, [0]*100))

context = ModbusServerContext(slaves=store, single=True)

identity = ModbusDeviceIdentification()
identity.VendorName  = 'MockPLCs'
identity.ProductCode = 'MP'
identity.VendorUrl   = 'http://github.com/bashwork/pymodbus/'
identity.ProductName = 'MockPLC 3000'
identity.ModelName   = 'MockPLC Ultimate'
identity.MajorMinorRevision = '1.0'

def startModbusServer():

    StartTcpServer(context, identity=identity, address=("localhost", MODBUS_SERVER_PORT))

def main():
    reactor.callInThread(runWorld)
    startModbusServer()

if __name__ == '__main__':
    sys.exit(main())

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
    if reactor.running:
        reactor.callFromThread(reactor.stop)

store = ModbusSlaveContext(
    di = ModbusSequentialDataBlock(0, [0]*100),
    co = ModbusSequentialDataBlock(0, [0]*100),
    hr = ModbusSequentialDataBlock(0, [0]*100),
    ir = ModbusSequentialDataBlock(0, [0]*100))

context = ModbusServerContext(slaves=store, single=True)

# Modbus PLC server information
identity = ModbusDeviceIdentification()
identity.VendorName  = 'Simmons Oil Refining Platform'
identity.ProductCode = 'SORP'
identity.VendorUrl   = 'http://simmons.com/markets/oil-gas/pages/refining-industry.html'
identity.ProductName = 'SORP 3850'
identity.ModelName   = 'Simmons ORP 3850'
identity.MajorMinorRevision = '2.09.01'

def startModbusServer():
    # Run a modbus server on specified address and modbus port (5020)
    StartTcpServer(context, identity=identity, address=(args.server_addr, MODBUS_SERVER_PORT))

def main():
    reactor.callInThread(run_world)
    startModbusServer()

if __name__ == '__main__':
    sys.exit(main())

# 需要导入模块: from pymodbus.device import ModbusDeviceIdentification [as 别名]
# 或者: from pymodbus.device.ModbusDeviceIdentification import ProductName [as 别名]
def run_server():
    # ----------------------------------------------------------------------- #
    # initialize your data store
    # ----------------------------------------------------------------------- #
    # The datastores only respond to the addresses that they are initialized to
    # Therefore, if you initialize a DataBlock to addresses of 0x00 to 0xFF, a
    # request to 0x100 will respond with an invalid address exception. This is
    # because many devices exhibit this kind of behavior (but not all)::
    #
    #     block = ModbusSequentialDataBlock(0x00, [0]*0xff)
    #
    # Continuing, you can choose to use a sequential or a sparse DataBlock in
    # your data context.  The difference is that the sequential has no gaps in
    # the data while the sparse can. Once again, there are devices that exhibit
    # both forms of behavior::
    #
    #     block = ModbusSparseDataBlock({0x00: 0, 0x05: 1})
    #     block = ModbusSequentialDataBlock(0x00, [0]*5)
    #
    # Alternately, you can use the factory methods to initialize the DataBlocks
    # or simply do not pass them to have them initialized to 0x00 on the full
    # address range::
    #
    #     store = ModbusSlaveContext(di = ModbusSequentialDataBlock.create())
    #     store = ModbusSlaveContext()
    #
    # Finally, you are allowed to use the same DataBlock reference for every
    # table or you may use a separate DataBlock for each table.
    # This depends if you would like functions to be able to access and modify
    # the same data or not::
    #
    #     block = ModbusSequentialDataBlock(0x00, [0]*0xff)
    #     store = ModbusSlaveContext(di=block, co=block, hr=block, ir=block)
    #
    # The server then makes use of a server context that allows the server to
    # respond with different slave contexts for different unit ids. By default
    # it will return the same context for every unit id supplied (broadcast
    # mode).
    # However, this can be overloaded by setting the single flag to False and
    # then supplying a dictionary of unit id to context mapping::
    #
    #     slaves  = {
    #         0x01: ModbusSlaveContext(...),
    #         0x02: ModbusSlaveContext(...),
    #         0x03: ModbusSlaveContext(...),
    #     }
    #     context = ModbusServerContext(slaves=slaves, single=False)
    #
    # The slave context can also be initialized in zero_mode which means that a
    # request to address(0-7) will map to the address (0-7). The default is
    # False which is based on section 4.4 of the specification, so address(0-7)
    # will map to (1-8)::
    #
    #     store = ModbusSlaveContext(..., zero_mode=True)
    # ----------------------------------------------------------------------- #
    store = ModbusSlaveContext(
        di=ModbusSequentialDataBlock(0, [17]*100),
        co=ModbusSequentialDataBlock(0, [17]*100),
        hr=ModbusSequentialDataBlock(0, [17]*100),
        ir=ModbusSequentialDataBlock(0, [17]*100))

    context = ModbusServerContext(slaves=store, single=True)

    # ----------------------------------------------------------------------- #
    # initialize the server information
    # ----------------------------------------------------------------------- #
    # If you don't set this or any fields, they are defaulted to empty strings.
    # ----------------------------------------------------------------------- #
    identity = ModbusDeviceIdentification()
    identity.VendorName = 'Pymodbus'
    identity.ProductCode = 'PM'
    identity.VendorUrl = 'http://github.com/riptideio/pymodbus/'
    identity.ProductName = 'Pymodbus Server'
    identity.ModelName = 'Pymodbus Server'
    identity.MajorMinorRevision = '2.2.0'

    # ----------------------------------------------------------------------- #
    # run the server you want
    # ----------------------------------------------------------------------- #
    # Tcp:
    StartTcpServer(context, identity=identity, address=("localhost", 5020))