Python FlowEntry.set_flow_cookie_mask方法代码示例

# 需要导入模块: from pybvc.openflowdev.ofswitch import FlowEntry [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.FlowEntry import set_flow_cookie_mask [as 别名]
def of_demo_16():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 16 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Type
    #                 IPv6 Source Address
    #                 IPv6 Destination Address
    eth_type = ETH_TYPE_IPv6
    ipv6_src = "fe80::2acf:e9ff:fe21:6431/128"
    ipv6_dst = "aabb:1234:2acf:e9ff::fe21:6431/64"

    # --- Flow Actions: Output (CONTROLLER)
    output_port = "CONTROLLER"

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                IPv6 Source Address (%s)\n"
           "                IPv6 Destination Address (%s)" %
           (hex(eth_type), ipv6_src, ipv6_dst))
    print ("        Action: Output (to %s)" %
           (output_port))

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    fname = "match=ipv6_src,ipv6_dst;actions=output:Controller"
    flow_entry.set_flow_name(flow_name=fname)
    table_id = 0
    flow_id = 23
    flow_entry.set_flow_table_id(table_id)
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_priority(flow_priority=1014)
    flow_entry.set_flow_cookie(cookie=408)
    flow_entry.set_flow_cookie_mask(cookie_mask=255)
    flow_entry.set_flow_hard_timeout(hard_timeout=3400)
    flow_entry.set_flow_idle_timeout(idle_timeout=3400)

    # --- Instruction: 'Apply-actions'
    #     Actions:     'Output'
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port=output_port)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   IPv6 Source Address
    #                   IPv6 Destination Address
    match = Match()
    match.set_eth_type(eth_type)
    match.set_ipv6_src(ipv6_src)
    match.set_ipv6_dst(ipv6_dst)
    flow_entry.add_match(match)

    print ("\n")
    print ("<<< Flow to send:")
    print flow_entry.get_payload()
    time.sleep(rundelay)
    result = ofswitch.add_modify_flow(flow_entry)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully added to the Controller")
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.brief().lower())
        exit(0)

    print ("\n")
    print ("<<< Get configured flow from the Controller")
    time.sleep(rundelay)
    result = ofswitch.get_configured_flow(table_id, flow_id)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully read from the Controller")
        print ("Flow info:")
        flow = result.get_data()
#.........这里部分代码省略.........

# 需要导入模块: from pybvc.openflowdev.ofswitch import FlowEntry [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.FlowEntry import set_flow_cookie_mask [as 别名]
                                                       icmpv6_type, icmpv6_code, metadata))
 print ("        Action: Output (to %s)" % output_port)
 
 
 time.sleep(rundelay)
 
 
 flow_entry = FlowEntry()
 table_id = 0
 flow_id = 26
 flow_entry.set_flow_table_id(table_id)
 flow_entry.set_flow_name(flow_name = "demo20.py")
 flow_entry.set_flow_id(flow_id)
 flow_entry.set_flow_priority(flow_priority = 1019)
 flow_entry.set_flow_cookie(cookie = 250)
 flow_entry.set_flow_cookie_mask(cookie_mask = 255)
 flow_entry.set_flow_hard_timeout(hard_timeout = 1200)
 flow_entry.set_flow_idle_timeout(idle_timeout = 3400)
 
 # --- Instruction: 'Apply-actions'
 #     Actions:     'Output'
 instruction = Instruction(instruction_order = 0)
 action = OutputAction(order = 0, port = output_port)
 instruction.add_apply_action(action)
 flow_entry.add_instruction(instruction)
 
 # --- Match Fields: Ethernet Type
 #                   IP DSCP
 #                   IP ECN
 #                   IPv6 Source Address
 #                   IPv6 Destination Address

# 需要导入模块: from pybvc.openflowdev.ofswitch import FlowEntry [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.FlowEntry import set_flow_cookie_mask [as 别名]
def of_demo_15():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 15 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Type
    #                 VLAN ID
    #                 Input Port
    eth_type = ETH_TYPE_IPv4
    vlan_id = 100
    input_port = 3

    # --- Flow Actions: Push VLAN: Ethernet Type
    #                   Set Field: VLAN ID
    #                   Output:    Port Number
    push_eth_type = ETH_TYPE_DOT1AD  # 802.1ad VLAN tagged frame
    push_vlan_id = 200
    output_port = 5

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                VLAN ID (%s)\n"
           "                Input Port (%s)" %
           (hex(eth_type), vlan_id, input_port))
    print ("        Action: Push VLAN (Ethernet Type=%s)" %
           (hex(push_eth_type)))
    print ("                Set Field (VLAN ID=%s)" %
           (push_vlan_id))
    print ("                Output (to Physical Port Number %s)" %
           (output_port))

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    flow_entry.set_flow_name(flow_name="Push VLAN")
    table_id = 0
    flow_entry.set_flow_table_id(table_id)
    flow_id = 22
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_priority(flow_priority=1013)
    flow_entry.set_flow_cookie(cookie=407)
    flow_entry.set_flow_cookie_mask(cookie_mask=255)
    flow_entry.set_flow_hard_timeout(hard_timeout=3400)
    flow_entry.set_flow_idle_timeout(idle_timeout=3400)

    # --- Instruction: 'Apply-actions'
    #     Actions:     'PushVlan'
    #                  'SetField'
    #                  'Output'
    instruction = Instruction(instruction_order=0)
    action = PushVlanHeaderAction(order=0)
    action.set_eth_type(eth_type=push_eth_type)
    instruction.add_apply_action(action)
    action = SetFieldAction(order=1)
    action.set_vlan_id(vid=push_vlan_id)
    instruction.add_apply_action(action)
    action = OutputAction(order=2, port=output_port)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   Ethernet Source Address
    #                   Ethernet Destination Address
    #                   Input Port
    match = Match()
    match.set_eth_type(eth_type)
    match.set_vlan_id(vlan_id)
    match.set_in_port(in_port=input_port)
    flow_entry.add_match(match)

    print ("\n")
    print ("<<< Flow to send:")
    print flow_entry.get_payload()
    time.sleep(rundelay)
    result = ofswitch.add_modify_flow(flow_entry)
    status = result.get_status()
#.........这里部分代码省略.........

# 需要导入模块: from pybvc.openflowdev.ofswitch import FlowEntry [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.FlowEntry import set_flow_cookie_mask [as 别名]
def of_demo_25():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 25 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")



    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    table_id = 0
    priority = 500
    cookie = 1000
    cookie_mask = 255
    customer_port = 110
    provider_port = 111
    qinq_eth_type = ETH_TYPE_STAG   # 802.1ad (QinQ) VLAN tagged frame
    dot1q_eth_type = ETH_TYPE_CTAG  # 802.1q VLAN tagged frame
    arp_eth_type = ETH_TYPE_ARP
    ip_eth_type = ETH_TYPE_IPv4
    provider_vlan_id = 100          # Provider VLAN
    customer_vlan_id = 998          # Customer VLAN
    first_flow_id = 31

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
           % (ctrlIpAddr, nodeName))

    # ---------------------------------------------------
    # First flow entry
    # ---------------------------------------------------
    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                VLAN ID (%s)\n"
           "                Input Port (%s)"
           % (hex(arp_eth_type), customer_vlan_id, customer_port))
    print ("        Action: Push VLAN (Ethernet Type %s)\n"
           "                Set Field (VLAN ID %s)\n"
           "                Push VLAN (Ethernet Type %s)\n"
           "                Set Field (VLAN ID %s)\n"
           "                Output (Physical Port number %s)"
           % (hex(qinq_eth_type), provider_vlan_id,
              hex(dot1q_eth_type), customer_vlan_id,
              provider_port))

    time.sleep(rundelay)

    flow_id = first_flow_id
    flow_entry1 = FlowEntry()
    flow_entry1.set_flow_table_id(table_id)
    fname = "[MLX1-A] Test flow (match:inport=110,arp;" + \
            "actions:push-QINQ-tag,mod_vlan=100," + \
            "push-DOT1Q-tag,mod_vlan=998,output:111)"
    flow_entry1.set_flow_name(flow_name=fname)
    flow_entry1.set_flow_id(flow_id)
    flow_entry1.set_flow_hard_timeout(hard_timeout=600)
    flow_entry1.set_flow_idle_timeout(idle_timeout=300)
    flow_entry1.set_flow_priority(priority)
    flow_entry1.set_flow_cookie(cookie)
    flow_entry1.set_flow_cookie_mask(cookie_mask)

    instruction = Instruction(instruction_order=0)

    action_order = 0
    action = PushVlanHeaderAction(action_order)
    action.set_eth_type(qinq_eth_type)
    instruction.add_apply_action(action)

    action_order += 1
    action = SetFieldAction(action_order)
    action.set_vlan_id(provider_vlan_id)
    instruction.add_apply_action(action)

    action_order += 1
    action = PushVlanHeaderAction(action_order)
    action.set_eth_type(dot1q_eth_type)
    instruction.add_apply_action(action)

    action_order += 1
    action = SetFieldAction(action_order)
    action.set_vlan_id(customer_vlan_id)
    instruction.add_apply_action(action)

#.........这里部分代码省略.........

# 需要导入模块: from pybvc.openflowdev.ofswitch import FlowEntry [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.FlowEntry import set_flow_cookie_mask [as 别名]
def of_demo_8():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 8 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")



    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Source Address
    #                 Ethernet Destination Address
    #                 IPv4 Source Address
    #                 IPv4 Destination Address
    #                 IP Protocol Number
    #                 IP DSCP
    #                 Input Port
    #     NOTE: Ethernet type MUST be 2048 (0x800) -> IPv4 protocol
    eth_type = ETH_TYPE_IPv4
    eth_src = "00:1c:01:00:23:aa"
    eth_dst = "00:02:02:60:ff:fe"
    ipv4_src = "10.0.245.1/24"
    ipv4_dst = "192.168.1.123/16"
    ip_proto = IP_PROTO_TLSP
    ip_dscp = IP_DSCP_CS3  # 'Class Selector' = 'Flash'
    input_port = 13

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
           % (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                Ethernet Source Address (%s)\n"
           "                Ethernet Destination Address (%s)\n"
           "                IPv4 Source Address (%s)\n"
           "                IPv4 Destination Address (%s)\n"
           "                IP Protocol Number (%s)\n"
           "                IP DSCP (%s)\n"
           "                Input Port (%s)"
           % (hex(eth_type), eth_src,
              eth_dst, ipv4_src, ipv4_dst,
              ip_proto, ip_dscp,
              input_port))
    print ("        Action: Output (CONTROLLER)")

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    table_id = 0
    flow_entry.set_flow_table_id(table_id)
    flow_id = 15
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_priority(flow_priority=1006)
    flow_entry.set_flow_cookie(cookie=100)
    flow_entry.set_flow_cookie_mask(cookie_mask=255)

    # --- Instruction: 'Apply-actions'
    #     Action:      'Output' to CONTROLLER
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port="CONTROLLER", max_len=60)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   Ethernet Source Address
    #                   Ethernet Destination Address
    #                   IPv4 Source Address
    #                   IPv4 Destination Address
    #                   IP Protocol Number
    #                   IP DSCP
    #                   Input Port
    match = Match()
    match.set_eth_type(eth_type)
    match.set_eth_src(eth_src)
    match.set_eth_dst(eth_dst)
    match.set_ipv4_src(ipv4_src)
    match.set_ipv4_dst(ipv4_dst)
    match.set_ip_proto(ip_proto)
    match.set_ip_dscp(ip_dscp)
    match.set_in_port(input_port)
    flow_entry.add_match(match)

#.........这里部分代码省略.........

# 需要导入模块: from pybvc.openflowdev.ofswitch import FlowEntry [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.FlowEntry import set_flow_cookie_mask [as 别名]
def of_demo_9():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 9 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Source Address
    #                 Ethernet Destination Address
    #                 IPv4 Source Address
    #                 IPv4 Destination Address
    #                 TCP Source Port Number
    #                 TCP Destination Port Number
    #                 IP DSCP
    #                 Input Port
    #     NOTE: Ethernet type MUST be 2048 (0x800) -> IPv4 protocol
    eth_type = ETH_TYPE_IPv4
    eth_src = "00:00:00:11:23:ae"
    eth_dst = "ff:ff:29:01:19:61"
    ipv4_src = "17.1.2.3/8"
    ipv4_dst = "172.168.5.6/16"
    ip_proto = IP_PROTO_TCP
    # Assured Forwarding ('class'=1, 'drop precedence'=2)
    ip_dscp = IP_DSCP_AF12
    tcp_src_port = 25364
    tcp_dst_port = 8080
    input_port = 13

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                Ethernet Source Address (%s)\n"
           "                Ethernet Destination Address (%s)\n"
           "                IPv4 Source Address (%s)\n"
           "                IPv4 Destination Address (%s)\n"
           "                IP Protocol Number (%s)\n"
           "                IP DSCP (%s)\n"
           "                TCP Source Port Number (%s)\n"
           "                TCP Destination Port Number (%s)\n"
           "                Input Port (%s)" %
           (hex(eth_type), eth_src,
            eth_dst, ipv4_src, ipv4_dst,
            ip_proto, ip_dscp,
            tcp_src_port, tcp_dst_port,
            input_port))
    print ("        Action: Output (NORMAL)")

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    table_id = 0
    flow_entry.set_flow_table_id(table_id)
    flow_id = 16
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_priority(flow_priority=1007)
    flow_entry.set_flow_cookie(cookie=101)
    flow_entry.set_flow_cookie_mask(cookie_mask=255)

    # --- Instruction: 'Apply-actions'
    #     Action:      'Output' NORMAL
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port="NORMAL")
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   Ethernet Source Address
    #                   Ethernet Destination Address
    #                   IPv4 Source Address
    #                   IPv4 Destination Address
    #                   IP Protocol Number
    #                   IP DSCP
    #                   IP ECN
    #                   TCP Source Port Number
    #                   TCP Destination Port Number
    #                   Input Port
    match = Match()
    match.set_eth_type(eth_type)
    match.set_eth_src(eth_src)
#.........这里部分代码省略.........

# 需要导入模块: from pybvc.openflowdev.ofswitch import FlowEntry [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.FlowEntry import set_flow_cookie_mask [as 别名]
def of_demo_23():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 23 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Type
    #                 Input Port
    #                 IPv4 Destination Address
    eth_type = ETH_TYPE_MPLS_UCAST
    in_port = 13
    mpls_label = 27

    # --- Flow Actions: Set Field
    #                   Output
    new_mpls_label = 44
    output_port = 14

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                Input Port (%s)\n"
           "                MPLS Label (%s)" %
           (hex(eth_type), in_port, mpls_label))
    print ("        Action: Set Field (MPLS Label %s)\n"
           "                Output (Physical Port number %s)" %
           (new_mpls_label, output_port))

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    table_id = 0
    flow_id = 29
    flow_entry.set_flow_table_id(table_id)
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_name(flow_name="Change MPLS Label")
    flow_entry.set_flow_hard_timeout(hard_timeout=0)
    flow_entry.set_flow_idle_timeout(idle_timeout=0)
    flow_entry.set_flow_priority(flow_priority=1022)
    flow_entry.set_flow_cookie(cookie=401)
    flow_entry.set_flow_cookie_mask(cookie_mask=255)

    # --- Instruction: 'Apply-actions'
    #     Actions:     'Set Field'
    #                  'Output'
    instruction = Instruction(instruction_order=0)
    action = SetFieldAction(order=0)
    action.set_mpls_label(new_mpls_label)
    instruction.add_apply_action(action)
    action = OutputAction(order=1, port=2)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   Input Port
    #                   MPLS Label
    match = Match()
    match.set_eth_type(eth_type)
    match.set_in_port(in_port)
    match.set_mpls_label(mpls_label)
    flow_entry.add_match(match)

    print ("\n")
    print ("<<< Flow to send:")
    print flow_entry.get_payload()
    time.sleep(rundelay)
    result = ofswitch.add_modify_flow(flow_entry)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully added to the Controller")
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.detailed())
        exit(0)

    print ("\n")
    print ("<<< Get configured flow from the Controller")
    time.sleep(rundelay)
#.........这里部分代码省略.........

# 需要导入模块: from pybvc.openflowdev.ofswitch import FlowEntry [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.FlowEntry import set_flow_cookie_mask [as 别名]
def of_demo_20():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 20 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Type
    #                 IP DSCP
    #                 IP ECN
    #                 IPv6 Source Address
    #                 IPv6 Destination Address
    #                 IPv6 Flow Label
    #                 ICMPv6 type
    #                 ICMPv6 Code
    #                 Metadata
    eth_type = ETH_TYPE_IPv6
    ip_dscp = IP_DSCP_CS7  # 'Class Selector' = 'Network'
    ip_ecn = IP_ECN_CE     # 'Congestion Encountered'
    ipv6_src = "1234:5678:9ABC:DEF0:FDCD:A987:6543:210F/76"
    ipv6_dst = "2000:2abc:edff:fe00::3456/94"
    ipv6_flabel = 15
    ip_proto = IP_PROTO_ICMPv6
    icmpv6_type = 1        # 'Destination Unreachable'
    icmpv6_code = 3        # 'Address Unreachable'
    metadata = "0x0123456789ABCDEF"

    # --- Flow Actions: Output (CONTROLLER)
    output_port = "CONTROLLER"

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                IP DSCP (%s)\n"
           "                IP ECN (%s)\n"
           "                IPv6 Source Address (%s)\n"
           "                IPv6 Destination Address (%s)\n"
           "                IPv6 Flow Label (%s)\n"
           "                ICMPv6 Type (%s)\n"
           "                ICMPv6 Code (%s)\n"
           "                Metadata (%s)" %
           (hex(eth_type), ip_dscp, ip_ecn,
            ipv6_src, ipv6_dst, ipv6_flabel,
            icmpv6_type, icmpv6_code, metadata))
    print ("        Action: Output (to %s)" % (output_port))

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    table_id = 0
    flow_id = 26
    flow_entry.set_flow_table_id(table_id)
    flow_entry.set_flow_name(flow_name="demo20.py")
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_priority(flow_priority=1019)
    flow_entry.set_flow_cookie(cookie=250)
    flow_entry.set_flow_cookie_mask(cookie_mask=255)
    flow_entry.set_flow_hard_timeout(hard_timeout=1200)
    flow_entry.set_flow_idle_timeout(idle_timeout=3400)

    # --- Instruction: 'Apply-actions'
    #     Actions:     'Output'
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port=output_port)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   IP DSCP
    #                   IP ECN
    #                   IPv6 Source Address
    #                   IPv6 Destination Address
    #                   IPv6 Flow Label
    #                   IP protocol number (ICMPv6)
    #                   ICMPv6 Type
    #                   ICMPv6 Code
    #                   Metadata
    match = Match()
    match.set_eth_type(eth_type)
#.........这里部分代码省略.........

# 需要导入模块: from pybvc.openflowdev.ofswitch import FlowEntry [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.FlowEntry import set_flow_cookie_mask [as 别名]
        "                Output (Physical Port number %s)" % (hex(qinq_eth_type), provider_vlan_id,
                                                              hex(dot1q_eth_type), customer_vlan_id,
                                                              provider_port))
 
 time.sleep(rundelay)
 
 flow_id = first_flow_id
 flow_entry1 = FlowEntry()
 flow_entry1.set_flow_table_id(table_id)
 flow_entry1.set_flow_name(flow_name = "[MLX1-A] Test flow (match:inport=110,arp;actions:push-QINQ-tag,mod_vlan=100,push-DOT1Q-tag,mod_vlan=998,output:111)")
 flow_entry1.set_flow_id(flow_id)
 flow_entry1.set_flow_hard_timeout(hard_timeout = 600)
 flow_entry1.set_flow_idle_timeout(idle_timeout = 300)
 flow_entry1.set_flow_priority(priority)
 flow_entry1.set_flow_cookie(cookie)
 flow_entry1.set_flow_cookie_mask(cookie_mask)
 
 instruction = Instruction(instruction_order = 0)
 
 action_order = 0
 action = PushVlanHeaderAction(action_order)
 action.set_eth_type(qinq_eth_type)
 instruction.add_apply_action(action)
 
 action_order += 1
 action = SetFieldAction(action_order)
 action.set_vlan_id(provider_vlan_id)
 instruction.add_apply_action(action)
 
 action_order += 1
 action = PushVlanHeaderAction(action_order)