本文整理汇总了Python中pyNastran.bdf.bdfInterface.assign_type.integer函数的典型用法代码示例。如果您正苦于以下问题：Python integer函数的具体用法？Python integer怎么用？Python integer使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了integer函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Python代码示例。
示例1: __init__
def __init__(self, card=None, data=None, comment=''):
LineElement.__init__(self, card, data)
if comment:
self._comment = comment
if card:
self.eid = integer(card, 1, 'eid')
self.pid = integer_or_blank(card, 2, 'pid', self.eid)
self.ga = integer(card, 3, 'ga')
self.gb = integer(card, 4, 'gb')
self.gc = integer(card, 5, 'gc')
self.initX_G0(card)
self.wa = array([double_or_blank(card, 9, 'w1a', 0.0),
double_or_blank(card, 10, 'w2a', 0.0),
double_or_blank(card, 11, 'w3a', 0.0)], dtype='float64')
self.wb = array([double_or_blank(card, 12, 'w1b', 0.0),
double_or_blank(card, 13, 'w2b', 0.0),
double_or_blank(card, 14, 'w3b', 0.0)], dtype='float64')
self.wc = array([double_or_blank(card, 15, 'w1c', 0.0),
double_or_blank(card, 16, 'w2c', 0.0),
double_or_blank(card, 17, 'w3c', 0.0)], dtype='float64')
self.tw = array([double_or_blank(card, 18, 0., 'twa'),
double_or_blank(card, 19, 0., 'twb'),
double_or_blank(card, 20, 0., 'twc')], dtype='float64')
self.s = array([integer_or_blank(card, 21, 'sa'),
integer_or_blank(card, 22, 'sb'),
integer_or_blank(card, 23, 'sc')], dtype='float64')
assert len(card) <= 24, 'len(CBEAM3 card) = %i' % len(card)
else:
raise NotImplementedError(data)示例2: __init__
def __init__(self, card=None, data=None, comment=''):
"""
Defines a static concentrated moment at a grid point by specifying a
scale factor and a vector that determines the direction.::
MOMENT SID G CID M N1 N2 N3
MOMENT 2 5 6 2.9 0.0 1.0 0.0
"""
Moment.__init__(self, card, data)
if comment:
self._comment = comment
if card:
self.sid = integer(card, 1, 'sid')
self.node = integer(card, 2, 'node')
self.cid = integer_or_blank(card, 3, 'cid', 0)
self.mag = double(card, 4, 'mag')
xyz = array([double_or_blank(card, 5, 'X1', 0.0),
double_or_blank(card, 6, 'X2', 0.0),
double_or_blank(card, 7, 'X3', 0.0)])
assert len(card) <= 8, 'len(MOMENT card) = %i' % len(card)
else:
raise NotImplementedError(data)
assert len(xyz) == 3, 'xyz=%s' % xyz
self.xyz = xyz示例3: __init__
def __init__(self, card=None, data=None, comment=''):
SolidProperty.__init__(self, card, data)
if comment:
self._comment = comment
if card:
#: Property ID
self.pid = integer(card, 1, 'pid')
#: Material ID
self.mid = integer(card, 2, 'mid')
self.cordm = integer_or_blank(card, 3, 'cordm', 0)
self.integ = integer_string_or_blank(card, 4, 'integ')
#validIntegration = ['THREE', 'TWO', 'FULL', 'BUBBLE',
# 2, 3, None, 'REDUCED']
self.stress = integer_string_or_blank(card, 5, 'stress')
self.isop = integer_string_or_blank(card, 6, 'isop')
self.fctn = string_or_blank(card, 7, 'fctn', 'SMECH')
assert len(card) <= 8, 'len(PSOLID card) = %i' % len(card)
else:
self.pid = data[0]
self.mid = data[1]
self.cordm = data[2]
self.integ = data[3]
self.stress = data[4]
self.isop = data[5]
self.fctn = data[6]
if self.fctn == 'SMEC':
self.fctn = 'SMECH'示例4: add
def add(self, card, comment=''):
i = self.i
#comment = self._comments[i]
eid = integer(card, 1, 'element_id')
#if comment:
#self._comments[eid] = comment
#: Element ID
self.element_id[i] = eid
#: Property ID
self.property_id[i] = integer(card, 2, 'property_id')
#: Node IDs
nids = array([
integer(card, 3, 'node_id_1'), integer(card, 4, 'node_id_2'),
integer(card, 5, 'node_id_3'), integer(card, 6, 'node_id_4'),
integer(card, 7, 'node_id_5'), integer(card, 8, 'node_id_6'),
integer(card, 9, 'node_id_7'), integer(card, 10, 'node_id_8'),
integer_or_blank(card, 11, 'node_id_9', 0),
integer_or_blank(card, 12, 'node_id_10', 0),
integer_or_blank(card, 13, 'node_id_11', 0),
integer_or_blank(card, 14, 'node_id_12', 0),
integer_or_blank(card, 15, 'node_id_13', 0),
integer_or_blank(card, 16, 'node_id_14', 0),
integer_or_blank(card, 17, 'node_id_15', 0),
integer_or_blank(card, 18, 'node_id_16', 0),
integer_or_blank(card, 19, 'node_id_17', 0),
integer_or_blank(card, 20, 'node_id_18', 0),
integer_or_blank(card, 21, 'node_id_19', 0),
integer_or_blank(card, 22, 'node_id_20', 0)
], dtype='int32')
self.node_ids[i, :] = nids
assert len(card) <= 23, 'len(CHEXA20 card) = %i' % len(card)
self.i += 1示例5: __init__
def __init__(self, card=None, data=None, comment=''):
Property.__init__(self, card, data)
if comment:
self._comment = comment
if card:
#: Property ID
self.pid = integer(card, 1, 'pid')
#: Material ID
self.mid1 = integer_or_blank(card, 2, 'mid1', 0)
self.t1 = double_or_blank(card, 3, 't1')
self.mid2 = integer_or_blank(card, 4, 'mid2', 0)
if self.mid2 > 0:
self.i = double(card, 5, 'i')
assert self.i > 0.0
else:
self.i = blank(card, 5, 'i')
self.mid3 = integer(card, 6, 0)
if self.mid3 > 0:
self.t2 = double(card, 7, 't3')
assert self.t2 > 0.0
else:
self.t2 = blank(card, 7, 't3')
self.nsm = double(card, 8, 'nsm')
self.z1 = double(card, 9, 'z1')
self.z2 = double(card, 10, 'z2')
self.phi = fields(double, card, 'phi', i=11, j=len(card))
else:
raise NotImplementedError(data)示例6: __init__
def __init__(self, card=None, data=None, comment=''):
Constraint.__init__(self, card, data)
if comment:
self._comment = comment
if card:
self.conid = integer(card, 1, 'sid')
if card.field(5) in [None, '']:
self.gids = [integer(card, 2, 'G1'),]
self.constraints = [components_or_blank(card, 3, 'C1', 0)]
self.enforced = [double_or_blank(card, 4, 'D1', 0.0)]
else:
self.gids = [
integer(card, 2, 'G1'),
integer_or_blank(card, 5, 'G2'),
]
# :0 if scalar point 1-6 if grid
self.constraints = [components_or_blank(card, 3, 'C1', 0),
components_or_blank(card, 6, 'C2', 0)]
self.enforced = [double_or_blank(card, 4, 'D1', 0.0),
double_or_blank(card, 7, 'D2', 0.0)]
else:
self.conid = data[0]
self.gids = [data[1]]
self.constraints = [data[2]]
self.enforced = [data[3]]示例7: __init__
def __init__(self, card=None, data=None, comment=''):
"""
Defines the properties of a shear panel (CSHEAR entry).
+--------+-----+-----+---+-----+----+----+
| PSHEAR | PID | MID | T | NSM | F1 | F2 |
+--------+-----+-----+---+-----+----+----+
"""
ShellProperty.__init__(self, card, data)
if comment:
self._comment = comment
if card:
#: Property ID
self.pid = integer(card, 1, 'pid')
#: Material ID
self.mid = integer(card, 2, 'mid')
self.t = double(card, 3, 't')
self.nsm = double_or_blank(card, 4, 'nsm', 0.0)
self.f1 = double_or_blank(card, 5, 'f1', 0.0)
self.f2 = double_or_blank(card, 6, 'f2', 0.0)
assert self.t > 0.0
#assert self.f1 >= 0.0
#assert self.f2 >= 0.0
assert len(card) <= 7, 'len(PSHEAR card) = %i' % len(card)
else:
#(pid,mid,t,nsm,f1,f2) = out
self.pid = data[0]
self.mid = data[1]
self.t = data[2]
self.nsm = data[3]
self.f1 = data[4]
self.f2 = data[5]示例8: __init__
def __init__(self, card=None, data=None, comment=''):
SolidElement.__init__(self, card, data)
if comment:
self._comment = comment
if card:
#: Element ID
self.eid = integer(card, 1, 'eid')
#: Property ID
self.pid = integer(card, 2, 'pid')
nids = [
integer(card, 3, 'nid1'),
integer(card, 4, 'nid2'),
integer(card, 5, 'nid3'),
integer(card, 6, 'nid4'),
integer(card, 7, 'nid5'),
integer(card, 8, 'nid6'),
integer(card, 9, 'nid7'),
integer(card, 10, 'nid8')
]
assert len(card) == 11, 'len(CHEXA8 card) = %i' % len(card)
else:
self.eid = data[0]
self.pid = data[1]
nids = data[2:]
assert len(data) == 10, 'len(data)=%s data=%s' % (len(data), data)
self.prepare_node_ids(nids)
assert len(self.nodes) == 8示例9: __init__
def __init__(self, card=None, data=None, comment=''):
ThermalLoad.__init__(self, card, data)
if comment:
self._comment = comment
if card:
#: Load set identification number. (Integer > 0)
self.sid = integer(card, 1, 'sid')
#: Identification number of an CHBDYj element. (Integer > 0)
self.eid = integer(card, 2, 'eid')
qFlux = []
j = 1
for i in range(3, len(card)):
q = double_or_blank(card, i, 'qFlux%i' % j)
qFlux.append(q)
j += 1
assert len(qFlux) > 0
#: Heat flux at the i-th grid point on the referenced CHBDYj
#: element. (Real or blank)
self.qFlux = wipe_empty_fields(qFlux)
else:
self.sid = data[0]
self.eid = data[1]
self.qFlux = data[2]示例10: add
def add(self, card, comment=''):
assert self.n > 0, self.n
i = self.i
load_id = integer(card, 1, 'load_id')
tbar = double(card, 3, 'Tbar')
tprime = double(card, 4, 'Tprime')
t1 = double_or_blank(card, 5, 'T1')
t2 = double_or_blank(card, 6, 'T2')
self.load_id[i] = load_id
self.element_id[i] = integer(card, 2, 'element_id')
self.tbar[i] = tbar
self.tprime[i] = tprime
self.temp[i, 0] = t1
self.temp[i, 1] = t2
self.i += 1
if len(card) >= 7:
# i must be < self.n
eids = expand_thru(card[9:])
for eid in eids:
self.load_id[i] = load_id
assert isinstance(eid, int), eid
self.element_id[i] = eid
self.tbar[i] = tbar
self.tprime[i] = tprime
self.temp[i, 0] = t1
self.temp[i, 1] = t2
self.i += 1
assert self.i <= self.n
assert len(card) <= 7, '%s; n=%s' % (card, len(card))
#assert len(card) <= 7, len(card)
self.eids = None示例11: __init__
def __init__(self, card=None, data=None, comment=''):
"""
Intilizes the CORD3G
:param self: the CORD3G coordinate system object
:param card: a list version of the fields
"""
if comment:
self._comment = comment
Coord.__init__(self, card, data)
self.cid = integer(card, 1, 'cid')
method = string_or_blank(card, 2, 'E313')
self.methodES = method[0]
self.methodInt = int(method[1:])
assert self.methodES in ['E', 'S'] # Euler / Space-Fixed
assert 0 < self.methodInt < 1000
self.form = string_or_blank(card, 3, 'form', 'EQN')
self.thetas = [integer(card, 4, 'theta1'),
integer(card, 5, 'theta2'),
integer(card, 6, 'theta3')]
assert len(self.thetas) == 3, 'thetas=%s' % (self.thetas)
self.rid = integer_or_blank(card, 7, 'cidRef')
assert len(card) <= 8, 'len(CORD3G card) = %i' % len(card)
# EQN for DEQATN, TABLE for TABLE3D
assert self.form in ['EQN', 'TABLE']示例12: __init__
def __init__(self, card=None, data=None, comment=''):
TabularLoad.__init__(self, card, data)
if comment:
self._comment = comment
if card:
self.sid = integer(card, 1, 'sid')
self.exciteID = integer(card, 2, 'exciteID')
self.delay = integer_double_or_blank(card, 3, 'delay', 0)
self.dphase = integer_double_or_blank(card, 4, 'dphase')
self.tc = integer_double_or_blank(card, 5, 'tc', 0)
self.td = integer_double_or_blank(card, 6, 'td', 0)
self.Type = integer_string_or_blank(card, 7, 'Type', 'LOAD')
assert self.tc > 0 or self.td > 0, 'either RLOAD TC or TD > 0; tc=%s td=%s' % (tc, td)
if self.Type in [0, 'L', 'LO', 'LOA', 'LOAD']:
self.Type = 'LOAD'
elif self.Type in [1, 'D', 'DI', 'DIS', 'DISP']:
self.Type = 'DISP'
elif self.Type in [2, 'V', 'VE', 'VEL', 'VELO']:
self.Type = 'VELO'
elif self.Type in [3, 'A', 'AC', 'ACC', 'ACCE']:
self.Type = 'ACCE'
else:
msg = 'invalid RLOAD1 type Type=%r' % self.Type
raise RuntimeError(msg)
assert len(card) <= 8, 'len(RLOAD1 card) = %i' % len(card)
else:
raise NotImplementedError(data)示例13: getShockA
def getShockA(self, card, iStart):
self.shockType = string_or_blank(card, iStart + 1, 'shockType')
self.shockCVT = double(card, iStart + 2, 'shockCVT')
self.shockCVC = double_or_blank(card, iStart + 3, 'shockCVC')
self.shockExpVT = double_or_blank(card, iStart + 4, 'shockExpVT', 1.0)
self.shockExpVC = double_or_blank(card, iStart + 5,
'shockExpVC', self.shockExpVT)
if self.shockType == 'TABLE':
pass
# self.shockIDTS = integer(card, iStart + 6, 'shockIDTS')
# self.shockIDETS = blank(card, iStart + 9, 'shockIDETS')
# self.shockIDECS = blank(card, iStart + 10, 'shockIDECS')
# self.shockIDETSD = blank(card, iStart + 11, 'shockIDETSD')
# self.shockIDECSD = blank(card, iStart + 12, 'shockIDECSD')
elif self.shockType == 'EQUAT':
self.shockIDTS = blank(card, iStart + 6, 'shockIDTS')
self.shockIDETS = integer(card, iStart + 9, 'shockIDETS')
self.shockIDECS = integer_or_blank(card, iStart + 10,
'shockIDECS', self.shockIDETS)
self.shockIDETSD = integer(card, iStart + 11, 'shockIDETSD')
self.shockIDECSD = integer_or_blank(card, iStart + 11,
'shockIDECSD', self.shockIDETSD)
else:
raise RuntimeError('Invalid shockType=|%s| on card\n%s' %(self.shockType, card))
iStart += 8
return iStart示例14: add
def add(self, card, comment=''):
i = self.i
self.element_id[i] = integer(card, 1, 'element_id')
self.property_id[i] = integer(card, 2, 'property_id')
self.coord_id[i] = integer_or_blank(card, 3, 'cp', 0)
self.nspan[i] = integer_or_blank(card, 4, 'nspan', 0)
self.nchord[i] = integer_or_blank(card, 5, 'nchord', 0)
#if self.nspan==0:
self.lspan[i] = integer_or_blank(card, 6, 'lspan', 0)
#if self.nchord==0:
self.lchord[i] = integer_or_blank(card, 7, 'lchord', 0)
self.igid[i] = integer(card, 8, 'igid')
self.p1[i, :] = [double_or_blank(card, 9, 'x1', 0.0),
double_or_blank(card, 10, 'y1', 0.0),
double_or_blank(card, 11, 'z1', 0.0)]
self.x12[i] = double_or_blank(card, 12, 'x12', 0.)
self.p4[i, :] = [double_or_blank(card, 13, 'x4', 0.0),
double_or_blank(card, 14, 'y4', 0.0),
double_or_blank(card, 15, 'z4', 0.0)]
self.x43[i] = double_or_blank(card, 16, 'x43', 0.)
assert len(card) <= 17, 'len(CAERO1 card) = %i' % len(card)
self.i += 1示例15: __init__
def __init__(self, card=None, data=None, comment=''):
LineDamper.__init__(self, card, data)
if comment:
self._comment = comment
if card:
self.eid = integer(card, 1, 'eid')
self.pid = integer(card, 2, 'pid')
nids = [integer_or_blank(card, 3, 'g1', 0),
integer_or_blank(card, 5, 'g2', 0)]
#: component number
self.c1 = integer_or_blank(card, 4, 'c1', 0)
self.c2 = integer_or_blank(card, 6, 'c2', 0)
assert len(card) <= 7, 'len(CDAMP1 card) = %i' % len(card)
else:
self.eid = data[0]
self.pid = data[1]
nids = [data[2], data[4]]
self.c1 = data[3]
self.c2 = data[5]
self.prepare_node_ids(nids, allow_empty_nodes=True)
assert len(self.nodes) == 2
msg = 'on\n%s\n is invalid validComponents=[0,1,2,3,4,5,6]' % str(self)
assert self.c1 in [0, 1, 2, 3, 4, 5, 6], 'c1=|%s| %s' % (self.c1, msg)
assert self.c2 in [0, 1, 2, 3, 4, 5, 6], 'c2=|%s| %s' % (self.c2, msg)