Python configuration.parse_arguments函数代码示例

definition.add_required("generation", "string", "generation name")

# Simulations to reanalyse
definition.add_optional("simulations", "string_list", "simulation names")

# Reanalyse which steps?
definition.add_positional_optional("steps", "string_list", "re-analyse only certain steps", choices=all_steps, default=all_steps)
definition.add_positional_optional("features", "string_list", "re-analyse only certain features (if a single step is defined)")
definition.add_optional("not_steps", "string_list", "don't analyse these steps", choices=all_steps)
definition.add_optional("not_features", "string_list", "don't analyse these features (if a single not_step is defined)")

# Add section for analysis options
definition.import_section("analysis", "analyser options", analysis_definition)

# Create the configuration
config = parse_arguments("generation_reanalysis", definition)

# -----------------------------------------------------------------

# Load the fitting run and the generation
fitting_run = runs.load(config.name)
generation = fitting_run.get_generation(config.generation)

# -----------------------------------------------------------------

# Loop over the simulations
for simulation in generation.simulations:

    # Check
    if config.simulations is not None and simulation.name not in config.simulations: continue

from pts.core.launch.analyser import reanalyse_simulation, all_steps
from pts.core.basics.log import log

# -----------------------------------------------------------------

# Create the configuration definition
definition = ConfigurationDefinition()
definition.add_required("remote", "string", "remote host to mount", choices=all_host_ids())
definition.add_required("ids", "integer_list", "simulation IDs")
definition.add_positional_optional("steps", "string_list", "re-analyse only certain steps", choices=all_steps, default=all_steps)
definition.add_positional_optional("features", "string_list", "re-analyse only certain features (if a single step is defined)")
definition.add_optional("not_steps", "string_list", "don't analyse these steps", choices=all_steps)
definition.add_optional("not_features", "string_list", "don't analyse these features (if a single not_step is defined)")

# Read the command line arguments
config = parse_arguments("reanalyse", definition, description="Re-analyse a certain simulation")

# -----------------------------------------------------------------

# Loop over the simulations
for simulation_id in config.ids:

    # Load the simulation
    simulation = get_simulation_for_host(config.remote, config.id)

    # Check whether retrieved (specific to remote simulations)
    if not simulation.retrieved: raise ValueError("The simulation has not been retrieved yet")

    # Inform the user
    log.info("Re-analysing simulation '" + simulation.name + "' (" + config.remote + " " + str(config.id) + ") ...")

from pts.core.basics.configuration import ConfigurationDefinition, parse_arguments
from pts.core.simulation.skifile import SkiFile
from pts.core.simulation.skifile import show_normalizations

# -----------------------------------------------------------------

# Create the configuration definition
definition = ConfigurationDefinition()

# Ski path
definition.add_required("ski", "file_path", "path of the ski file")

# Optional
definition.add_optional("flux", "photometric_unit", "also show flux in a particular unit")

# -----------------------------------------------------------------

# Parse the arguments into a configuration
config = parse_arguments("normalizations", definition, "Show the normalizations of stellar components in a ski file")

# -----------------------------------------------------------------

# Load the ski file
ski = SkiFile(config.ski)

# -----------------------------------------------------------------

show_normalizations(ski, flux_unit=config.flux)

# -----------------------------------------------------------------

from pts.core.basics.configuration import ConfigurationDefinition, parse_arguments
from pts.magic.services.s4g import get_galaxy_names, has_galaxy
from pts.core.basics.map import Map
from pts.core.basics.log import log
from pts.core.basics.table import SmartTable

# -----------------------------------------------------------------

# Create the configuration
definition = ConfigurationDefinition()

#
definition.add_optional("ngalaxies", "positive_integer", "max number of galaxies")

# Get configuration
config = parse_arguments("plot_galaxies", definition)

# -----------------------------------------------------------------

# Create the database instance
database = DustPediaDatabase()
#username, password = get_account()
#database.login(username, password)

# -----------------------------------------------------------------

sample = DustPediaSample()
galaxy_names = sample.get_names()

# -----------------------------------------------------------------

definition.add_flag("distributions", "show residual distributions", False)

# Extra
definition.add_flag("normalize", "normalize the images")
definition.add_optional("share_scale_with", "string", "share the scale of all other images with this image")
definition.add_optional("colormap", "string", "colormap", "viridis")

# Extra
definition.add_flag("write_data", "write data")

# Output
definition.add_optional("output", "directory_path", "output directory")

# Create the configuration
config = parse_arguments("show_residuals", definition, "Show residuals of photometry images and mock observed images in current director")

# -----------------------------------------------------------------

# Get modeling path
environment = find_modeling_environment_up_cwd()

# -----------------------------------------------------------------

# Create plotter
plotter = ResidualImageGridPlotter()

# Plot residual distributions
plotter.config.distributions = config.distributions

# Downsampling

# -----------------------------------------------------------------

formats = ["avi", "gif", "apng"]
default_format = "gif"

# -----------------------------------------------------------------

# Create the definition
definition = ConfigurationDefinition()

# File format
definition.add_optional("format", "string", "output format", default_format, choices=formats)
definition.add_optional("fps", "positive_integer", "frames per second", 10)

# Parse the command line arguments
config = parse_arguments("animate", definition)

# -----------------------------------------------------------------

# Add the frames
paths = fs.files_in_cwd(extension="png", sort=int)

# Determine path
path = "animation." + config.format

# APNG
if config.format == "apng":

    delay = 1000/config.fps  # in miliseconds

    # CRASHES

import numpy as np

# Import the relevant PTS classes and modules
from pts.core.basics.configuration import ConfigurationDefinition, parse_arguments
from pts.magic.core.image import Image
from pts.core.tools import filesystem as fs
from pts.core.basics.log import log

# -----------------------------------------------------------------

# Create the configuration
definition = ConfigurationDefinition()
definition.add_required("file_path", "file_path", "path of the image")
definition.add_required("factor", "real", "multiplication factor")
definition.add_flag("backup", "make a backup of each image that is multiplied", False)
config = parse_arguments("multiply", definition)

# -----------------------------------------------------------------

# BACKUP FIRST
if config.backup:

    # Inform the user
    log.info("Making a backup of the original image ...")

    # Determine new filepath and copy
    new_filepath = fs.appended_filepath(config.filepath, "_backup")
    fs.copy_file(config.filepath, new_filepath)

# -----------------------------------------------------------------

from pts.core.remote.remote import Remote
from pts.core.basics.configuration import ConfigurationDefinition, parse_arguments

# -----------------------------------------------------------------

# Create definition
definition = ConfigurationDefinition()
definition.add_positional_optional("skirt_and_or_pts", "string_list", "SKIRT and/or PTS", default=["skirt", "pts"], choices=["skirt", "pts"])

# Add flags
definition.add_flag("conda", "also remove conda installation")
definition.add_flag("qt", "also remove Qt installation")
definition.add_flag("one_attempt", "only perform one attempt at connecting to a remote")

# Get the config
config = parse_arguments("deinstall_all", definition)

# -----------------------------------------------------------------

# Loop over the remote hosts
for host_id in find_host_ids():

    # Setup
    remote = Remote()
    if not remote.setup(host_id, one_attempt=config.one_attempt):
        log.warning("Remote host '" + host_id + "' is offline")
        continue

    # Create uninstaller
    uninstaller = Uninstaller()

all_host_ids = find_host_ids()
all_hosts = find_hosts()

# -----------------------------------------------------------------

# Create configuration definition
definition = ConfigurationDefinition()

# Remote hosts
definition.add_positional_optional("hosts", "host_list", "remote hosts", default=all_hosts, choices=all_host_ids)

# Flags
definition.add_flag("clusters", "show the clusters")

# Create the configuration
config = parse_arguments("remotes", definition, "Check the status of the remotes")

# -----------------------------------------------------------------

# Set log level in a special way
if config.debug: setup_log("DEBUG")
else: setup_log("ERROR")

# -----------------------------------------------------------------

# Loop over the hosts
print("")
for host in config.hosts:

    # Debugging
    log.debug("Connecting to remote host '" + host.id + "' ...")

# -----------------------------------------------------------------

# Ensure Python 3 compatibility
from __future__ import absolute_import, division, print_function

# Import the relevant PTS classes and modules
from pts.core.basics.configuration import ConfigurationDefinition, parse_arguments
from pts.core.remote.remote import Remote

# -----------------------------------------------------------------

definition = ConfigurationDefinition()
definition.add_required("remote", "string", "remote host ID")
definition.add_required("line", "string", "line to be executed on the remote host")
config = parse_arguments("sessions", definition)

# -----------------------------------------------------------------

# Initialize the remote
remote = Remote()
if not remote.setup(config.remote): raise RuntimeError("The remote host '" + config.remote + "' is not available at the moment")

# -----------------------------------------------------------------

print("")
#print("-----------------------------------------------------------------")
print("OUTPUT")
print("-----------------------------------------------------------------")
print("")

from pts.core.tools.stringify import tostr, stringify_list_fancy

# -----------------------------------------------------------------

# Create the definition
definition = ConfigurationDefinition()

# Wavelength range
definition.add_positional_optional("wavelength_range", "quantity_range", "wavelength range")

# Flags
definition.add_flag("filters", "show filters in regimes", False)
definition.add_flag("physical", "use physical regimes (star formation, stellar emission, aromatic features, dust thermal emission, microwave)", False)

# Parse the command line arguments
config = parse_arguments("regimes", definition)

# -----------------------------------------------------------------

# Physical
if config.physical:

    # Get the list of regimes
    if config.wavelength_range is not None: regimes = physical_regimes_in_range(config.wavelength_range)
    else: regimes = physical_regimes

    print("")
    for name in regimes:

        print(fmt.bold + fmt.blue + name + fmt.reset)
        print("")

# Import the relevant PTS classes and modules
from pts.core.extract.progress import extract_progress_cwd, ProgressTable
from pts.core.plot.progress import ProgressPlotter
from pts.core.tools import filesystem as fs
from pts.core.basics.configuration import ConfigurationDefinition, parse_arguments

# -----------------------------------------------------------------

# Create the configuration definition
definition = ConfigurationDefinition()

# Add flags
definition.add_flag("table", "save the extracted progress table")

# Get configuration
config = parse_arguments("plotprogress", definition)

# -----------------------------------------------------------------

# Look for a file in the current working directory that contains extracted progress information
progress_table_path = fs.join(fs.cwd(), "progress.dat")
if fs.is_file(progress_table_path): table = ProgressTable.from_file(progress_table_path)

# If extracted progress information is not present, first perform the extraction
else: table = extract_progress_cwd()

# -----------------------------------------------------------------

if config.table and not fs.is_file(progress_table_path): table.saveto(progress_table_path)

# -----------------------------------------------------------------

definition.add_optional("covering_factor", "positive_real", "covering factor", 0.2) # fPDR

# Flags
definition.add_flag("plot", "plot the SEDs", False)
definition.add_flag("skirt", "use SKIRT", True)
definition.add_flag("pts", "use PTS", True)
definition.add_flag("sampled", "use SKIRT luminosities already sampled on a wavelength grid", True)
definition.add_flag("only_skirt", "only SKIRT", False)
definition.add_flag("only_pts", "only PTS", False)
definition.add_flag("only_sampled", "only sampled", False)

# Output path
definition.add_optional("output", "directory_path", "output path")

# Get the configuration
config = parse_arguments("sfr_to_lum", definition, "Convert a SFR to a luminosity in a certain band")

# -----------------------------------------------------------------

# Check
if config.only_skirt:
    config.pts = config.sampled = False
    config.skirt = True
elif config.only_pts:
    config.skirt = config.sampled = False
    config.pts = True
elif config.only_sampled:
    config.skirt = config.pts = False
    config.sampled = True

# -----------------------------------------------------------------

definition = ConfigurationDefinition(write_config=False)

# Quantity to convert and unit to convert to
definition.add_required("quantity", "string", "quantity to convert to another unit")
definition.add_required("unit", "string", "unit to convert the quantity to")

# Extra information
definition.add_optional("distance", "length_quantity", "distance")
definition.add_optional("wavelength", "length_quantity", "wavelength")
definition.add_optional("frequency", "frequency_quantity", "frequency")
definition.add_optional("pixelscale", "pixelscale", "pixelscale")
definition.add_optional("solid_angle", "solid_angle", "solid angle")
definition.add_optional("filter", "filter", "filter")

# Create the configuration
config = parse_arguments("convert", definition, "Convert a quantity from one unit to another")

# -----------------------------------------------------------------

# Check quantity
if is_photometric_quantity(config.quantity):

    #physical_types = possible_physical_types(config.quantity)
    #print(physical_types)

    # Density?
    density_flags = possible_density_flags(config.quantity)
    if len(density_flags) == 1: density = density_flags[0]
    elif len(density_flags) == 2: density = prompt_yn("density", "is this quantity (" + config.quantity + ") a spectral density?")
    else: raise RuntimeError("Something went wrong")

from pts.core.tools import introspection
from pts.core.tools import filesystem as fs
from pts.core.basics.configuration import ConfigurationDefinition, parse_arguments
from pts.core.remote.host import find_host_ids
from pts.core.remote.remote import Remote
from pts.core.tools import time

# -----------------------------------------------------------------

# Create definition
definition = ConfigurationDefinition()
definition.add_positional_optional("remote", "string", "remote host on which to clear the temporary directory", choices=find_host_ids())
definition.add_optional("names", "string_list", "remove temporary directories matching these names (e.g. 'installation' matches 'installation_2017-05-03--08-45-44-410', 'installation_2017-05-03--13-52-28-371', etc. and also exact matches")

# Create setter
config = parse_arguments("clear_temp", definition)

# -----------------------------------------------------------------

# Remote
if config.remote is not None:

    # Create the remote
    remote = Remote(host_id=config.remote)

    # Check whether names are given
    if config.names is not None:

        # Loop over the directories in the temporary directory
        for path, name in remote.directories_in_path(remote.pts_temp_path, returns=["path", "name"]):