Python OpServerUtils.opserver_query_url方法代码示例

# 需要导入模块: from opserver.opserver_util import OpServerUtils [as 别名]
# 或者: from opserver.opserver_util.OpServerUtils import opserver_query_url [as 别名]
 def post_query_json(self, json_str, sync=True):
     '''
     this module is to support raw query given in json format
     '''
     res = None
     try:
         flows_url = OpServerUtils.opserver_query_url(self._ip, str(self._port))
         print flows_url
         print "query is: ", json_str
         res = []
         resp = OpServerUtils.post_url_http(flows_url, json_str, sync)
         if sync:
             if resp is not None:
                 res = json.loads(resp)
                 res = res['value']
         else: 
             if resp is not None:
                 resp = json.loads(resp)
                 qid = resp['href'].rsplit('/', 1)[1]
                 result = OpServerUtils.get_query_result(self._ip, str(self._port), qid, 30)
                 for item in result:
                     res.append(item)
     except Exception as e:
         print str(e) 
     finally:
         return res        

# 需要导入模块: from opserver.opserver_util import OpServerUtils [as 别名]
# 或者: from opserver.opserver_util.OpServerUtils import opserver_query_url [as 别名]
    def post_query(self, table, start_time=None, end_time=None,
                   select_fields=None, where_clause=None,
                   sort_fields=None, sort=None, limit=None,
                   filter=None, sync=True,dir=None):
        res = None
        try:
            flows_url = OpServerUtils.opserver_query_url(
                self._ip, str(self._port))
            print flows_url
            query_dict = OpServerUtils.get_query_dict(
                table, start_time, end_time,
                select_fields,
                where_clause,
                sort_fields, sort, limit, filter, dir)

            print json.dumps(query_dict)
            res = []
            resp = OpServerUtils.post_url_http(
                flows_url, json.dumps(query_dict), sync)
            if sync:
                if resp is not None:
                    res = json.loads(resp)
                    res = res['value']
            else:
                if resp is not None:
                    resp = json.loads(resp)
                    qid = resp['href'].rsplit('/', 1)[1]
                    result = OpServerUtils.get_query_result(
                        self._ip, str(self._port), qid, 30)
                    for item in result:
                        res.append(item)
        except Exception as e:
            print str(e)
        finally:
            return res

# 需要导入模块: from opserver.opserver_util import OpServerUtils [as 别名]
# 或者: from opserver.opserver_util.OpServerUtils import opserver_query_url [as 别名]
    def query(self,schema):
        query_url = OpServerUtils.opserver_query_url(
            self._args.opserver_ip,
            self._args.opserver_port)
        
        query_dict = OpServerUtils.get_query_dict(
                "StatTable." + self._args.table, str(self._start_time), str(self._end_time),
                select_fields = self._args.select,
                where_clause = "AND".join(self._args.where),
                sort_fields = self._args.sort)
        
        print json.dumps(query_dict)
        resp = OpServerUtils.post_url_http(
            query_url, json.dumps(query_dict), sync = True)

        res = None
        if resp is not None:
            res = json.loads(resp)
            res = res['value']

        return res

# 需要导入模块: from opserver.opserver_util import OpServerUtils [as 别名]
# 或者: from opserver.opserver_util.OpServerUtils import opserver_query_url [as 别名]
    def query(self):
        start_time, end_time = OpServerUtils.get_start_end_time(
            self._start_time,
            self._end_time)
        flow_url = OpServerUtils.opserver_query_url(
            self._args.opserver_ip,
            self._args.opserver_port)
        where = []
        filter = []
        if self._args.vrouter is not None:
            vrouter_match = OpServerUtils.Match(
                name=self._VROUTER,
                value=self._args.vrouter,
                op=OpServerUtils.MatchOp.EQUAL)
            where.append(vrouter_match.__dict__)

        if self._args.source_vn is not None:
            source_vn_match = OpServerUtils.Match(
                name=self._SOURCE_VN,
                value=self._args.source_vn,
                op=OpServerUtils.MatchOp.EQUAL)
            where.append(source_vn_match.__dict__)

        if self._args.destination_vn is not None:
            dest_vn_match = OpServerUtils.Match(
                name=self._DESTINATION_VN,
                value=self._args.destination_vn,
                op=OpServerUtils.MatchOp.EQUAL)
            where.append(dest_vn_match.__dict__)

        if self._args.source_ip is not None:
            source_ip_match = OpServerUtils.Match(
                name=self._SOURCE_IP,
                value=self._args.source_ip,
                op=OpServerUtils.MatchOp.EQUAL)
            where.append(source_ip_match.__dict__)

        if self._args.destination_ip is not None:
            dest_ip_match = OpServerUtils.Match(
                name=self._DESTINATION_IP,
                value=self._args.destination_ip,
                op=OpServerUtils.MatchOp.EQUAL)
            where.append(dest_ip_match.__dict__)

        if self._args.protocol is not None:
            protocol_match = OpServerUtils.Match(
                name=self._PROTOCOL,
                value=self._args.protocol,
                op=OpServerUtils.MatchOp.EQUAL)
            where.append(protocol_match.__dict__)

        if self._args.source_port is not None:
            source_port_match = OpServerUtils.Match(
                name=self._SOURCE_PORT,
                value=self._args.source_port,
                op=OpServerUtils.MatchOp.EQUAL)
            where.append(source_port_match.__dict__)

        if self._args.destination_port is not None:
            dest_port_match = OpServerUtils.Match(
                name=self._DESTINATION_PORT,
                value=self._args.destination_port,
                op=OpServerUtils.MatchOp.EQUAL)
            where.append(dest_port_match.__dict__)

        if self._args.action is not None:
            action_match = OpServerUtils.Match(
                name=self._ACTION,
                value=self._args.action,
                op=OpServerUtils.MatchOp.EQUAL)
            filter.append(action_match.__dict__)

        # Flow Record Table Query
        table = VizConstants.FLOW_TABLE
        if len(where) == 0:
            where = None
        else:
            where = [where]

        select_list = [
            VizConstants.FLOW_TABLE_UUID,
            self._VROUTER,
            self._SETUP_TIME,
            self._TEARDOWN_TIME,
            self._SOURCE_VN,
            self._DESTINATION_VN,
            self._SOURCE_IP,
            self._DESTINATION_IP,
            self._PROTOCOL,
            self._SOURCE_PORT,
            self._DESTINATION_PORT,
            self._ACTION,
            self._DIRECTION,
            VizConstants.FLOW_TABLE_AGG_BYTES,
            VizConstants.FLOW_TABLE_AGG_PKTS,
        ]

        if len(filter) == 0:
            filter = None

#.........这里部分代码省略.........

# 需要导入模块: from opserver.opserver_util import OpServerUtils [as 别名]
# 或者: from opserver.opserver_util.OpServerUtils import opserver_query_url [as 别名]
    def query(self):
        start_time, end_time = OpServerUtils.get_start_end_time(
            self._start_time,
            self._end_time)
        messages_url = OpServerUtils.opserver_query_url(
            self._args.opserver_ip,
            self._args.opserver_port)
        where_msg = []
        where_obj = []
        filter = []
        if self._args.source is not None:
            source_match = OpServerUtils.Match(name=VizConstants.SOURCE,
                                               value=self._args.source,
                                               op=OpServerUtils.MatchOp.EQUAL)
            where_msg.append(source_match.__dict__)

        if self._args.module is not None:
            module_match = OpServerUtils.Match(name=VizConstants.MODULE,
                                               value=self._args.module,
                                               op=OpServerUtils.MatchOp.EQUAL)
            where_msg.append(module_match.__dict__)

        if self._args.category is not None:
            category_match = OpServerUtils.Match(
                name=VizConstants.CATEGORY,
                value=self._args.category,
                op=OpServerUtils.MatchOp.EQUAL)
            where_msg.append(category_match.__dict__)

        if self._args.message_type is not None:
            message_type_match = OpServerUtils.Match(
                name=VizConstants.MESSAGE_TYPE,
                value=self._args.message_type,
                op=OpServerUtils.MatchOp.EQUAL)
            where_msg.append(message_type_match.__dict__)

        if self._args.level is not None:
            level_match = OpServerUtils.Match(
                name=VizConstants.LEVEL,
                value=SandeshLevel._NAMES_TO_VALUES[self._args.level],
                op=OpServerUtils.MatchOp.GEQ)
            filter.append(level_match.__dict__)

        if (self._args.object is not None or
            self._args.object_id is not None or
                self._args.object_select_field is not None):
            # Object Table Query
            where_obj = list(where_msg)

            if self._args.object is not None:
                if self._args.object in OBJECT_TABLE_LIST:
                    table = self._args.object
                else:
                    print 'Unknown object table [%s]' % (self._args.object)
                    return None
            else:
                print 'Object required for query'
                return None

            if self._args.object_id is not None:
                id_match = OpServerUtils.Match(name=OpServerUtils.OBJECT_ID,
                                               value=self._args.object_id,
                                               op=OpServerUtils.MatchOp.EQUAL)
                where_obj.append(id_match.__dict__)
            else:
                print 'Object id required for table [%s]' % (self._args.object)
                return None

            if self._args.object_select_field is not None:
                if ((self._args.object_select_field !=
                     VizConstants.OBJECT_LOG) and
                    (self._args.object_select_field !=
                     VizConstants.SYSTEM_LOG)):
                    print 'Invalid object-select-field. '\
                        'Valid values are "%s" or "%s"' \
                        % (VizConstants.OBJECT_LOG,
                           VizConstants.SYSTEM_LOG)
                    return None
                obj_sel_field = [self._args.object_select_field]
                self._args.object_select_field = obj_sel_field
            else:
                self._args.object_select_field = obj_sel_field = [
                    VizConstants.OBJECT_LOG, VizConstants.SYSTEM_LOG]

            where = [where_obj]

            select_list = [
                VizConstants.TIMESTAMP,
                VizConstants.SOURCE,
                VizConstants.MODULE,
                VizConstants.MESSAGE_TYPE,
            ] + obj_sel_field
        elif self._args.trace is not None:
            table = VizConstants.COLLECTOR_GLOBAL_TABLE
            if self._args.source is None:
                print 'Source is required for trace buffer dump'
                return None
            if self._args.module is None:
                print 'Module is required for trace buffer dump'
                return None
#.........这里部分代码省略.........