本文整理汇总了Python中neutron.agent.linux.ip_lib.ensure_device_is_ready函数的典型用法代码示例。如果您正苦于以下问题：Python ensure_device_is_ready函数的具体用法？Python ensure_device_is_ready怎么用？Python ensure_device_is_ready使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ensure_device_is_ready函数的7个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Python代码示例。
示例1: test_ensure_device_is_ready
def test_ensure_device_is_ready(self):
ip_lib_mock = mock.Mock()
with mock.patch.object(ip_lib, 'IPDevice', return_value=ip_lib_mock):
self.assertTrue(ip_lib.ensure_device_is_ready("eth0"))
self.assertTrue(ip_lib_mock.link.set_up.called)
ip_lib_mock.reset_mock()
# device doesn't exists
ip_lib_mock.link.set_up.side_effect = RuntimeError
self.assertFalse(ip_lib.ensure_device_is_ready("eth0"))示例2: setup
def setup(self, network):
"""Create and initialize a device for network's DHCP on this host."""
port = self.setup_dhcp_port(network)
self._update_dhcp_port(network, port)
interface_name = self.get_interface_name(network, port)
if ip_lib.ensure_device_is_ready(interface_name, namespace=network.namespace):
LOG.debug("Reusing existing device: %s.", interface_name)
else:
self.driver.plug(network.id, port.id, interface_name, port.mac_address, namespace=network.namespace)
self.fill_dhcp_udp_checksums(namespace=network.namespace)
ip_cidrs = []
for fixed_ip in port.fixed_ips:
subnet = fixed_ip.subnet
if not ipv6_utils.is_auto_address_subnet(subnet):
net = netaddr.IPNetwork(subnet.cidr)
ip_cidr = "%s/%s" % (fixed_ip.ip_address, net.prefixlen)
ip_cidrs.append(ip_cidr)
if self.conf.enable_isolated_metadata and self.conf.use_namespaces:
ip_cidrs.append(METADATA_DEFAULT_CIDR)
self.driver.init_l3(interface_name, ip_cidrs, namespace=network.namespace)
# ensure that the dhcp interface is first in the list
if network.namespace is None:
device = ip_lib.IPDevice(interface_name)
device.route.pullup_route(interface_name, ip_version=constants.IP_VERSION_4)
if self.conf.use_namespaces:
self._set_default_route(network, interface_name)
return interface_name示例3: setup
def setup(self, network):
"""Create and initialize a device for network's DHCP on this host."""
port = self.setup_dhcp_port(network)
self._update_dhcp_port(network, port)
interface_name = self.get_interface_name(network, port)
if ip_lib.ensure_device_is_ready(interface_name, namespace=network.namespace):
LOG.debug("Reusing existing device: %s.", interface_name)
else:
try:
self.driver.plug(
network.id,
port.id,
interface_name,
port.mac_address,
namespace=network.namespace,
mtu=network.get("mtu"),
)
except Exception:
with excutils.save_and_reraise_exception():
LOG.exception(_LE("Unable to plug DHCP port for " "network %s. Releasing port."), network.id)
self.plugin.release_dhcp_port(network.id, port.device_id)
self.fill_dhcp_udp_checksums(namespace=network.namespace)
ip_cidrs = []
for fixed_ip in port.fixed_ips:
subnet = fixed_ip.subnet
if not ipv6_utils.is_auto_address_subnet(subnet):
net = netaddr.IPNetwork(subnet.cidr)
ip_cidr = "%s/%s" % (fixed_ip.ip_address, net.prefixlen)
ip_cidrs.append(ip_cidr)
if self.driver.use_gateway_ips:
# For each DHCP-enabled subnet, add that subnet's gateway
# IP address to the Linux device for the DHCP port.
for subnet in network.subnets:
if not subnet.enable_dhcp:
continue
gateway = subnet.gateway_ip
if gateway:
net = netaddr.IPNetwork(subnet.cidr)
ip_cidrs.append("%s/%s" % (gateway, net.prefixlen))
if self.conf.enable_isolated_metadata:
ip_cidrs.append(METADATA_DEFAULT_CIDR)
self.driver.init_l3(interface_name, ip_cidrs, namespace=network.namespace)
self._set_default_route(network, interface_name)
try:
self._cleanup_stale_devices(network, port)
except Exception:
# catch everything as we don't want to fail because of
# cleanup step
LOG.error(_LE("Exception during stale dhcp device cleanup"))
return interface_name示例4: setup
def setup(self, network):
"""Create and initialize a device for network's DHCP on this host."""
port = self.setup_dhcp_port(network)
interface_name = self.get_interface_name(network, port)
if ip_lib.ensure_device_is_ready(interface_name,
namespace=network.namespace):
LOG.debug('Reusing existing device: %s.', interface_name)
else:
self.driver.plug(network.id,
port.id,
interface_name,
port.mac_address,
namespace=network.namespace)
self.fill_dhcp_udp_checksums(namespace=network.namespace)
ip_cidrs = []
for fixed_ip in port.fixed_ips:
subnet = fixed_ip.subnet
if not ipv6_utils.is_auto_address_subnet(subnet):
net = netaddr.IPNetwork(subnet.cidr)
ip_cidr = '%s/%s' % (fixed_ip.ip_address, net.prefixlen)
ip_cidrs.append(ip_cidr)
LOG.debug("ip_cidrs = %s" % ip_cidrs)
if self.driver.subnet_ip_usage is constants.USE_GATEWAY_IPS:
# For each DHCP-enabled subnet, add that subnet's gateway
# IP address to the Linux device for the DHCP port..
for subnet in network.subnets:
if not subnet.enable_dhcp:
continue
gateway = subnet.gateway_ip
if gateway:
net = netaddr.IPNetwork(subnet.cidr)
ip_cidrs.append('%s/%s' % (gateway, net.prefixlen))
LOG.debug("ip_cidrs = %s" % ip_cidrs)
if (self.conf.enable_isolated_metadata and
self.conf.use_namespaces):
ip_cidrs.append(METADATA_DEFAULT_CIDR)
self.driver.init_l3(interface_name, ip_cidrs,
namespace=network.namespace)
# ensure that the dhcp interface is first in the list
if network.namespace is None:
device = ip_lib.IPDevice(interface_name)
device.route.pullup_route(interface_name,
ip_version=constants.IP_VERSION_4)
if self.conf.use_namespaces:
self._set_default_route(network, interface_name)
return interface_name示例5: ensure_bridge
def ensure_bridge(self, bridge_name, interface=None,
update_interface=True):
"""Create a bridge unless it already exists."""
# ensure_device_is_ready instead of device_exists is used here
# because there are cases where the bridge exists but it's not UP,
# for example:
# 1) A greenthread was executing this function and had not yet executed
# "ip link set bridge_name up" before eventlet switched to this
# thread running the same function
# 2) The Nova VIF driver was running concurrently and had just created
# the bridge, but had not yet put it UP
if not ip_lib.ensure_device_is_ready(bridge_name):
LOG.debug("Starting bridge %(bridge_name)s for subinterface "
"%(interface)s",
{'bridge_name': bridge_name, 'interface': interface})
bridge_device = bridge_lib.BridgeDevice.addbr(bridge_name)
if bridge_device.setfd(0):
return
if bridge_device.disable_stp():
return
if bridge_device.link.set_up():
return
LOG.debug("Done starting bridge %(bridge_name)s for "
"subinterface %(interface)s",
{'bridge_name': bridge_name, 'interface': interface})
else:
bridge_device = bridge_lib.BridgeDevice(bridge_name)
if not interface:
return bridge_name
# Update IP info if necessary
if update_interface:
self.update_interface_ip_details(bridge_name, interface)
# Check if the interface is part of the bridge
if not bridge_device.owns_interface(interface):
try:
# Check if the interface is not enslaved in another bridge
bridge = bridge_lib.BridgeDevice.get_interface_bridge(
interface)
if bridge:
bridge.delif(interface)
bridge_device.addif(interface)
except Exception as e:
LOG.error("Unable to add %(interface)s to %(bridge_name)s"
"! Exception: %(e)s",
{'interface': interface, 'bridge_name': bridge_name,
'e': e})
return
return bridge_name示例6: setup
def setup(self, network):
"""Create and initialize a device for network's DHCP on this host."""
port = self.setup_dhcp_port(network)
interface_name = self.get_interface_name(network, port)
if ip_lib.ensure_device_is_ready(interface_name,
self.root_helper,
network.namespace):
LOG.debug(_('Reusing existing device: %s.'), interface_name)
else:
self.driver.plug(network.id,
port.id,
interface_name,
port.mac_address,
namespace=network.namespace)
ip_cidrs = []
for fixed_ip in port.fixed_ips:
subnet = fixed_ip.subnet
net = netaddr.IPNetwork(subnet.cidr)
ip_cidr = '%s/%s' % (fixed_ip.ip_address, net.prefixlen)
ip_cidrs.append(ip_cidr)
if (self.conf.enable_isolated_metadata and
self.conf.use_namespaces):
ip_cidrs.append(METADATA_DEFAULT_CIDR)
self.driver.init_l3(interface_name, ip_cidrs,
namespace=network.namespace)
# ensure that the dhcp interface is first in the list
if network.namespace is None:
device = ip_lib.IPDevice(interface_name,
self.root_helper)
device.route.pullup_route(interface_name)
if self.conf.use_namespaces:
self._set_default_route(network, interface_name)
return interface_name示例7: setup
def setup(self, network):
"""Create and initialize a device for network's DHCP on this host."""
port = self.setup_dhcp_port(network)
interface_name = self.get_interface_name(network, port)
if ip_lib.ensure_device_is_ready(interface_name,
self.root_helper,
network.namespace):
LOG.debug(_('Reusing existing device: %s.'), interface_name)
else:
self.driver.plug(network.id,
port.id,
interface_name,
port.mac_address,
namespace=network.namespace)
ip_cidrs = []
for fixed_ip in port.fixed_ips:
subnet = fixed_ip.subnet
net = netaddr.IPNetwork(subnet.cidr)
ip_cidr = '%s/%s' % (fixed_ip.ip_address, net.prefixlen)
ip_cidrs.append(ip_cidr)
if not self.driver.bridged():
# When the DHCP port and VM TAP interfaces are not
# bridged, assign the subnet's gateway IP address to the
# DHCP port.
LOG.debug("ip_cidrs = %s" % ip_cidrs)
for i, subnet in enumerate(network.subnets):
if not subnet.enable_dhcp:
continue
gateway = subnet.gateway_ip
for hr in subnet.host_routes:
if hr.destination == "0.0.0.0/0":
gateway = hr.nexthop
if gateway:
net = netaddr.IPNetwork(subnet.cidr)
ip_cidrs.append('%s/%s' % (gateway, net.prefixlen))
if (self.driver.bridged() and
self.conf.enable_isolated_metadata and
self.conf.use_namespaces):
ip_cidrs.append(METADATA_DEFAULT_CIDR)
LOG.debug("ip_cidrs = %s" % ip_cidrs)
self.driver.init_l3(interface_name, ip_cidrs,
namespace=network.namespace)
# ensure that the dhcp interface is first in the list
if self.driver.bridged() and network.namespace is None:
device = ip_lib.IPDevice(interface_name,
self.root_helper)
device.route.pullup_route(interface_name)
if (self.driver.bridged() and
self.conf.use_namespaces):
self._set_default_route(network, port)
return interface_name