Python naoqitools.myGetProxy函数代码示例

def sayAndCacheAndLight( strTextToSay, bJustPrepare = False, bStoreToNonVolatilePath = False, nEyesColor = 0, nUseLang = -1 ):
    "say a cached text with light animation"
    "nEyesColor: 0: white, 1: blue, 2: green; 3: red"
    "nUseLang: if different of -1: speak with a specific languages (useful, when text are already generated: doesn't need to swap languages for nothing!"
    "return the length of the text in seconds, or None if impossible"
    print( "sayAndCacheAndLight( '%s', bJustPrepare: %s, bStoreToNonVolatilePath: %s, nEyesColor: %s, nUseLang: %s )" % ( strTextToSay, str( bJustPrepare ), str( bStoreToNonVolatilePath ), str( nEyesColor ), str( nUseLang ) ) );
    if( not config.bPrecomputeText ):
        print( "sayAndCacheAndLight: disabled by configuration: bPrecomputeText is false" );
        if( bJustPrepare ):
            return None; # do nothing
        tts = naoqitools.myGetProxy( "ALTextToSpeech" );
        tts.say( strTextToSay );
        return None;

    rLength = sayAndCache( strTextToSay, bJustPrepare = True, bStoreToNonVolatilePath = bStoreToNonVolatilePath, nUseLang = nUseLang, bCalledFromSayAndCacheFromLight = True ); # we store it to disk, only if we must do it

    # this two lines are done too in sayAndCache...
    strTextToSay = assumeTextHasDefaultSettings( strTextToSay, nUseLang );
    szFilename = sayAndCache_getFilename( strTextToSay, nUseLang );

    szPathVolatile = pathtools.getVolatilePath();
    rSampleLenSec = 0.05;
#    szPathFilenamePeak = szPathVolatile + szFilename + ("_%5.3f.egy" % rSampleLenSec);
    szPathFilenamePeak = szFilename + ("_%5.3f.egy" % rSampleLenSec);
    szPathFilenamePeakCache = pathtools.getCachePath() + "generatedvoices" + pathtools.getDirectorySeparator() + szPathFilenamePeak;
    szPathFilenamePeak = szPathVolatile + szPathFilenamePeak;
    anLedsColorSequency = [];
    aBufFile = "";
    bFileGenerated = False;
    if( not filetools.isFileExists( szPathFilenamePeak ) ):
        if( filetools.isFileExists( szPathFilenamePeakCache ) ):
            copyFile( szPathFilenamePeakCache, szPathFilenamePeak );
    if( not filetools.isFileExists( szPathFilenamePeak ) ):
        # generate peak file
        timeBegin = time.time();
        print( "sayAndCacheAndLight: generating peak light - begin\n" );
        szPathFilename = szPathVolatile + szFilename + ".raw";
        anLedsColorSequency = [];
        try:
            une = naoqitools.myGetProxy( 'UsageNoiseExtractor' );
            anLedsColorSequency = une.analyseSpeakSound( szPathFilename, int( rSampleLenSec * 1000 ), False );
        except BaseException, err:
            print( "ERR: sayAndCacheAndLight( '%s' ): err: %s" % ( strTextToSay, str( err ) ) );
            print( "ERR: sayAndCacheAndLight => trying old cpp version" );
            anLedsColorSequency = analyseSpeakSound( szPathFilename, rSampleLenSec * 1000 );
        print( "sayAndCacheAndLight: analyseSpeakSound - end - time: %fs\n" % float( time.time() - timeBegin ) );        
#        print( "anLedsColorSequency: %d samples: %s\n" % ( len( anLedsColorSequency ), str( anLedsColorSequency ) ) );
        
        print( "Writing file with %d peak samples (time: %d)\n" % ( len( anLedsColorSequency ), int( time.time() ) ) );
        #         struct.pack_into( "f"*len( anLedsColorSequency ), aBufFile, anLedsColorSequency[:] );
        for peakValue in anLedsColorSequency:
            aBufFile += struct.pack( "f", peakValue );
        try:
            file = open( szPathFilenamePeak, "wb" );
            file.write( aBufFile );
        except RuntimeError, err:
            print( "ERR: sayAndCacheAndLight( '%s' ): err: %s" % ( strTextToSay, str( err ) ) );

    def launch( self, strPathAndFilenameXar, bWaitEnd = True, strHostName = 'localhost', bForceLoading = False, rTimeOutInSec = 60*60*24*7 ):
        "launch a behavior and return the framemanager id"
        "return [id, return_value]"
        "the id has no use if bWaitEnd is true"
        "the return_value is not set if not bWaitEnd"
        "rTimeOutInSec: on pourrait peut etre mettre un temps plus court par défaut, ca serait mieux pour les tests"
        nSimulatedThreadID = random.randint( 1,10000 );
        self.log( "INF: launch: Launching %s:%s, rTimeOutInSec=%5.3f (thread:%d)" % ( strHostName, strPathAndFilenameXar, rTimeOutInSec, nSimulatedThreadID ) );
        mem = naoqitools.myGetProxy( "ALMemory", strHostName = strHostName );
#        mem.raiseMicroEvent( self.getVarName_SoftCancel( strPathAndFilenameXar ), False ); # on ne le fait pas ici, car des fois on a un stoppe, avant de rentrer dans cette méthode, donc autant le lire ici... par contre on le reinitialisera apres le comportement !         
        if( not bWaitEnd ):
            mem.raiseMicroEvent( self.getVarName_SoftCancel( strPathAndFilenameXar ), False ); # cependant dans ce cas, vu qu'on ne sera pas mis au courant de la fin de ce behavior, on ne pourra pas le remettre a False a la fin, donc il faut le mettre la
        try:
            if( mem.getData( self.getVarName_SoftCancel( strPathAndFilenameXar ) ) == True ):
                self.log( "INF: launch: Launching %s:%s - end (soft canceled before loading)(thread:%d)" % ( strHostName, strPathAndFilenameXar, nSimulatedThreadID ) );
                mem.raiseMicroEvent( self.getVarName_SoftCancel( strPathAndFilenameXar ), False ); # on le réinit pour le prochain lancement
                return [None, None];
        except:
            pass # oui cette variable peut ne pas encore exister!
        nXarID = self.load( strPathAndFilenameXar, strHostName, bForceLoading );
        if( nXarID == -1 ):
            self.log( "ERR: launch: '%s:%s' load failure" % ( strHostName, strPathAndFilenameXar, nSimulatedThreadID ) );
            return -1;
        nNumLoadedXar = self.find( strPathAndFilenameXar, strHostName );
        if( self.aLoadedXar[nNumLoadedXar][3] == True ):
            self.log( "WNG: launch: already launched: '%s:%s' => waiting a little (thread:%d)" % ( strHostName, strPathAndFilenameXar, nSimulatedThreadID ) );
            time.sleep( 1.0 ); # attend une seconde et reteste
            nNumLoadedXar = self.find( strPathAndFilenameXar, strHostName ); # refresh nNumLoadedXar
            if( self.aLoadedXar[nNumLoadedXar][3] == True ):
                self.log( "ERR: launch: already launched: '%s:%s' => skipped (thread:%d)" % ( strHostName, strPathAndFilenameXar, nSimulatedThreadID ) );
                return -1;
        self.aLoadedXar[nNumLoadedXar][3] = True;            
        mem.insertData( self.getVarName_Results( strPathAndFilenameXar ), self.unknown_value );
        mem.insertData( self.getVarName_Cancel( strPathAndFilenameXar ), False );
        try:
            if( mem.getData( self.getVarName_SoftCancel( strPathAndFilenameXar ) ) == True ):
                # on a été interrompu pendant le chargement ou  la connection d'un machin!
                self.log( "INF: launch: Launching %s:%s - end (soft canceled before launching) (thread:%d)" % ( strHostName, strPathAndFilenameXar, nSimulatedThreadID ) );
                mem.raiseMicroEvent( self.getVarName_SoftCancel( strPathAndFilenameXar ), False ); # on le réinit pour le prochain lancement
                self.aLoadedXar[nNumLoadedXar][3] = False;
                return [None, None];
        except:
            pass # oui cette variable peut ne pas encore exister!
            
            
        fm = naoqitools.myGetProxy( "ALFrameManager", strHostName = strHostName );
        try:
            self.log( "DBG: launch: before fm.playBehavior(%s) (thread:%d)" % ( str( nXarID ), nSimulatedThreadID ) );
            fm.playBehavior( nXarID );
            self.log( "DBG: launch: after fm.playBehavior(%s) (thread:%d)" % ( str( nXarID ), nSimulatedThreadID ) );
        except BaseException, err:
            self.log( "ERR: launch: while launching playBehavior on '%s': %s (thread:%d)" % ( strPathAndFilenameXar, err, nSimulatedThreadID ) );
            # self.aLoadedXar[nNumLoadedXar][3] = False; # pas la peine: on va carrément l'invalider!            
            # erasing it for next one!
            self.invalidate( strPathAndFilenameXar, strHostName );
            return [None, None];

def speechEmo( txt, strEmotion = "Standard", bWaitEnd = True, bPrecompute = False ):
    "talk using a specific emotion"
    "strEmotion, can be 'Standard', 'Happy', 'Sad', 'Loud', 'Proxi' or NAO"
    "Return -1 on error, or the ID of the speaking task"
    print( "speechEmo( '%s', strEmotion = '%s', bPrecompute = %s" % (txt, str( strEmotion ), str( bPrecompute ) ) );
    try:
        tts = naoqitools.myGetProxy( 'ALTextToSpeech' );
        ad = naoqitools.myGetProxy( 'ALAudioDevice' );
    except BaseException, err:
        print( "ERR: abcdk.speech.speechEmo: " + str( err ) );
        return -1;

def getHtmlPage( strHtmlAdress, bWaitAnswer = True, rTimeOutForAnswerInSec = 30.0, strSaveAs = None, bTryToUseCpp = True ):
    "return a web page, or "" on error (async or sync method, with optionnal timeout)"
    "Warning: don't put '&' in the html adress !"
    "rTimeOutForAnswerInSec: set to 0 for infinite"
    "strSaveAs: instead of returning a string, just save to a file and return True"
    # this method is ok but doesn't work on adress that doesn't finished with an extension (.ext)
#  req = urllib2.Request( strHtmlAdress );
#  print req.get_full_url();
# handle = urllib2.urlopen( req );
#  res = handle.read();
#  return res;

    # use cpp !
    if( bTryToUseCpp ):
        try:
            usage = naoqitools.myGetProxy( 'UsageTools' );
            # separate hostname and directories
            strHost, strFolder, strPageName = getHostFolderAndFile( strHtmlAdress );
    #        print( "altools.getHtmlPage: L'ADRESSE DU SITE: -%s-%s-%s-:" % (strHost, strFolder, strPageName) );
    #        strHost = strHost[len('http://'):]; # remove http: older version doesn't like it !
            if( strSaveAs != None ):
                if( bWaitAnswer ):
                    bRet = usage.getWebFile( strHost, strFolder + strPageName, strSaveAs, rTimeOutForAnswerInSec );
                    return bRet;
                else:
                    bRet = usage.post.getWebFile( strHost, strFolder + strPageName, strSaveAs, rTimeOutForAnswerInSec );
                    return "";
            strPageContents = usage.getWebPage( strHost, strFolder + strPageName, rTimeOutForAnswerInSec );
            if( strPageContents != "error" or ( rTimeOutForAnswerInSec > 0. and rTimeOutForAnswerInSec < 10.0 ) ): # if we put a short timeout, that's possible to have an empty response!
                return strPageContents; # else, we will use the normal method
            else:
                print( "WRN: getHtmlPage: CPP method error: return empty, trying other method" );
        except BaseException, err:
            print( "WRN: getHtmlPage: CPP method error: %s" % str( err ) );
            pass # use oldies version

def getNbrMoveOrder( nThreshold = 0.06 ):
    "compute current joint moving by order"
    mem = naoqitools.myGetProxy( "ALMemory" );
    global global_getNbrMoveOrder_listKeyOrder;
    global global_getNbrMoveOrder_listKeyValue;
    global global_getNbrMoveOrder_listKeyStiffness;
    global global_getNbrMoveOrder_listOrder_prev;

    # first time: generate key list
    if( len( global_getNbrMoveOrder_listKeyOrder ) < 1 ):
        listJointName = getDcmBodyJointName();
        for strJointName in listJointName:
            global_getNbrMoveOrder_listKeyOrder.append( "Device/SubDeviceList/%s/Position/Actuator/Value" % strJointName );
            global_getNbrMoveOrder_listKeyValue.append( "Device/SubDeviceList/%s/Position/Sensor/Value" % strJointName );
            global_getNbrMoveOrder_listKeyStiffness.append( "Device/SubDeviceList/%s/Hardness/Actuator/Value" % strJointName );
            global_getNbrMoveOrder_listOrder_prev = mem.getListData( global_getNbrMoveOrder_listKeyOrder ); # init first time

    # get all values
    arOrder = mem.getListData( global_getNbrMoveOrder_listKeyOrder );
    arValue = mem.getListData( global_getNbrMoveOrder_listKeyValue );
    arStiffness= mem.getListData( global_getNbrMoveOrder_listKeyStiffness );

    nNbr = 0;
    for i in range( len( arOrder ) ):
        # a joint is moving if: pos is different from order, if order changed and if stiffness
        # we can have a big difference between order and value when no stiffness (position is out of range)
        if( ( abs( arOrder[i] - arValue[i] ) > nThreshold or abs( global_getNbrMoveOrder_listOrder_prev[i] - arOrder[i] ) > 0.01 ) and arStiffness[i] > 0.01 ):
            nNbr += 1;
#            debug.debug( "getNbrMoveOrder: difference on %s: order: %f; sensor: %f; stiffness: %f" % ( global_getNbrMoveOrder_listKeyValue[i], arOrder[i], arValue[i], arStiffness[i] ) );
    global_getNbrMoveOrder_listOrder_prev = arOrder;
    return nNbr;

def getNaoChestName():
    "get the nao name as stored in the rom chest"
    stm = naoqitools.myGetProxy( "ALMemory" );
    strNum = stm.getData( "Device/DeviceList/ChestBoard/BodyNickName" );
    if( strNum == 'Nao336' and getNaoNickName() == 'Astroboy' ):
        strNum = 'Nao332';    
    return strNum;

def coloriseBox_ActivateOneBox_internal( strPathBoxName, bActivate = True ):
    "add an activation color to a single level box"
    global global_coloriseBox_ActivateOneBox_allBoxState;
    debug( "coloriseBox_ActivateOneBox_internal( '%s', %d )" % ( strPathBoxName, bActivate ) );

    global global_SectionCritique;
    while( global_SectionCritique.testandset() == False ):
        debug( "coloriseBox_ActivateOneBox_internal: locked" );
        time.sleep( 0.05 );

    nIdx = -1;
    for i in range( len( global_coloriseBox_ActivateOneBox_allBoxState ) ):
        if( global_coloriseBox_ActivateOneBox_allBoxState[i][0] == strPathBoxName ):
            nIdx = i;
            break;
    if( nIdx == -1 ):
        # first time
        nIdx = len( global_coloriseBox_ActivateOneBox_allBoxState );
        global_coloriseBox_ActivateOneBox_allBoxState.append( [ strPathBoxName, 0 ] );

    strBoxName = choregrapheBoxPathNameToBoxName( strPathBoxName );
    debug( "coloriseBox_ActivateOneBox_internal: '%s' last => '%s'" % ( strPathBoxName, strBoxName ) );
    if( bActivate ):
        global_coloriseBox_ActivateOneBox_allBoxState[nIdx][1] +=1;
        if( global_coloriseBox_ActivateOneBox_allBoxState[nIdx][1] == 1 ):
            # colorise it!
            controller = naoqitools.myGetProxy( "ALChoregrapheController" );
            try:
                controller.setBoxTitleColor( strBoxName, 0., 0., 1. );
            except BaseException, err:
                debug( "coloriseBox_ActivateOneBox_internal: Exception catched: %s" % err );

 def updateImg( self, strMessage, strFilenameImg = None, strLegend = None ):
     "add an image and a sentence to a blog"
     "strFilenameImg: if None, take a picture using camera"
     "strLegend: if different of None or strLegend, add a legend below the image"
     
     if( strFilenameImg == None ):
         print( "INF: Blog.updateImg: Taking picture...\n" );
         camToolBox = naoqitools.myGetProxy( "ALVisionToolbox" );
         camToolBox.halfPress();
         strFilenameImg = "/home/nao/" + filetools.getFilenameFromTime();
         camToolBox.post.takePictureRegularly( 5.0, strFilenameImg, True, "jpg", 2 ); # 2=> VGA
         time.sleep( 2.2 ); # 1 second is not sufficient !
         camToolBox.stopTPR( strFilenameImg, "jpg" );
         strFilenameImg = strFilenameImg + '.jpg'; # coz takePictureRegularly add '.jpg' automatically
         print( "INF: Blog.updateImg: Taking picture, file goes to '%s'\n" % strFilenameImg );
     strExt = os.path.basename( strFilenameImg );
     strExt = strExt.split( '.' );
     strExt = strExt.pop();
     strFilename = filetools.getFilenameFromTime() + '.' + strExt;
     strDest = self.strImgFolderAbs + strFilename;
     filetools.copyFile( strFilenameImg, strDest );
     strTxt = "<table cellpadding=2><tr><td>%s<br></td></tr><tr><td><IMG SRC='%s' HEIGHT=192></td></tr>" % ( strMessage, self.strImgFolderLocal + strFilename );
     if( strLegend != None and strLegend != "" ):
         strTxt += "<tr><td><font size=-2><center>- %s -</center></font></td></tr>" % strLegend;
     strTxt += "</table>";
     self.updateBlog( strTxt );

 def getGroupLimits( listGroup, rCoef = 1., bOrderedByMinMax = False ):
   "get list of limits from a group name or a list of group"
   "rCoef: you can reduce the list by a ratio (0.5, will get halt the limits)"    
   "order default: list of min,max,acc for each joint"
   "order bOrderedByMinMax: list of min of each joint, then list of max of each joint..."
   listJoints = PoseLibrary.getListJoints( listGroup );
   listLimits = [];
   if( bOrderedByMinMax ):
       listLimits = [[],[],[]];
   motion = naoqitools.myGetProxy( 'ALMotion' );
   for strJointName in listJoints:
       limitForThisJoint = motion.getLimits( strJointName );
       # gestion 1.7.25 et rétrocompatibilité
       if( len( limitForThisJoint ) > 1 ):
           limitForThisJoint = limitForThisJoint[1];
       limitForThisJoint = limitForThisJoint[0];
       print( "getGroupLimits: %s => %s" % ( strJointName, str( limitForThisJoint ) ) );
       if( not bOrderedByMinMax ):
           limitForThisJoint[0] *= rCoef;
           limitForThisJoint[1] *= rCoef;
           limitForThisJoint[2] *= rCoef;            
           listLimits.append( limitForThisJoint );
       else:
           listLimits[0].append( limitForThisJoint[0]*rCoef );
           listLimits[1].append( limitForThisJoint[1]*rCoef );
           listLimits[2].append( limitForThisJoint[2]*rCoef );
   return listLimits;

def setSpeakLanguage( nNumLang = getDefaultSpeakLanguage(), proxyTts = False ):
    "change the tts speak language"
    print( "SetSpeakLanguage to: %d" % nNumLang );
    if( not proxyTts ):
        proxyTts = naoqitools.myGetProxy( "ALTextToSpeech" );
    if( not proxyTts ):
        debug.debug( "ERR: setSpeakLanguage: can't connect to tts" );
        return;

    try:
        if( nNumLang == constants.LANG_FR ):
            proxyTts.loadVoicePreference( "NaoOfficialVoiceFrench" );
        elif ( nNumLang == constants.LANG_EN ):
            proxyTts.loadVoicePreference( "NaoOfficialVoiceEnglish" );
        elif ( nNumLang == constants.LANG_SP ):
            proxyTts.loadVoicePreference( "NaoOfficialVoiceSpanish" );
        elif ( nNumLang == constants.LANG_IT ):
            proxyTts.loadVoicePreference( "NaoOfficialVoiceItalian" );
        elif ( nNumLang == constants.LANG_GE ):
            proxyTts.loadVoicePreference( "NaoOfficialVoiceGerman" );
        elif ( nNumLang == constants.LANG_CH ):
            proxyTts.loadVoicePreference( "NaoOfficialVoiceChinese" );
        elif ( nNumLang == constants.LANG_PO ):
            proxyTts.loadVoicePreference( "NaoOfficialVoicePolish" );
        elif ( nNumLang == constants.LANG_KO ):
            proxyTts.loadVoicePreference( "NaoOfficialVoiceKorean" );            
        else:
            proxyTts.loadVoicePreference( "NaoOfficialVoiceEnglish" );
    except:
        print( "ERR: setSpeakLanguage: loadVoicePreference error" );

def runBehavior_BM( strBehavior, nTimeOut = 60 ):
    "launch a behavior on Nao, return "" if loading failed, or the 'naoqi' name of the behavior"
    "nTimeOut: temps maximum a attendre en secondes, -1 => pas d'attente (don't wait end)"
    abm = naoqitools.myGetProxy( "ALBehaviorManager" );
    strBeName = getLibraryName( strBehavior );
    
    # comme on ne peut le charger qu'une fois, on doit toujours le stopper avant (ca stoppera un précédent)
    try:
        print( "naolibrary.runBehavior: stopping previously running (%s)" % strBehavior );
        abm.stopBehavior( strBeName );
    except:
        pass # not previously running ... not a big deal
    try:
        print( "naolibrary.runBehavior: unloading previously loaded (%s)" % strBehavior );
        abm.unloadBehavior( self.strBehaviorName );
    except:
        pass # not previously running ... not a big deal
    
    try:
        print( "naolibrary.runBehavior: loading (%s)" % strBehavior );
        abm.loadBehavior( strBeName );
    except:
        print( "naolibrary.runBehavior: can't preload behavior, version >= 1.4.32 (%s) ?" % strBehavior );
    try:
        print( "naolibrary.runBehavior: running (%s)" % strBehavior );
        abm.runBehavior( strBeName );
        rStep = 0.2;
        rTotal = 0;
        while( abm.isBehaviorRunning( strBeName ) or rTotal > nTimeOut ):
            print( "naolibrary.runBehavior: waiting '%s'... %f..." % ( strBehavior, rStep ) );
            time.sleep( rStep );
            rTotal += rStep;
    except BaseException, err:
        debug.logToChoregraphe( "naolibrary.runBehavior: error occurs: " + str( err ) );
        strBeName = "";

def setBrainVuMeter( nLeftLevel, nRightLevel, rIntensity = 1.0, bDontWait = False, bInverseSide = False ):
    "use the brain leds as vu meter (left and right separated)"
    "the 0 is in the front of Nao"
    "nXxxLevel in [0,6] => 0: full lightoff; 6 => full litten"
    "bInverseSide: the 0 becomes at bottom of Nao"
    dcm = naoqitools.myGetProxy( "DCM" );
    rTime = 0.05
    riseTime = dcm.getTime(int( rTime*1000 ));
    for i in range( 6 ):
        if( not bInverseSide ):
            strDeviceNameR = getBrainLedName( i );
            strDeviceNameL = getBrainLedName( 11-i );
        else:
            strDeviceNameR = getBrainLedName( 5-i );
            strDeviceNameL = getBrainLedName( 11-(5-i) );            
        if( i < nLeftLevel ):
            rIntL = rIntensity;
        else:
            rIntL = 0.;
        if( i < nRightLevel ):
            rIntR = rIntensity;
        else:
            rIntR = 0.;        
        dcm.set( [ strDeviceNameL, "Merge",  [[ float( rIntL ), riseTime ]] ] );         # le float ici est ultra important car sinon venant de chorégraphe 1.0 => 1 (depuis les sliders de params)
        dcm.set( [ strDeviceNameR, "Merge",  [[ float( rIntR ), riseTime ]] ] );
    if( not bDontWait ):
        time.sleep( rTime );

def sayAndCache_internal( strTextToSay, bJustPrepare, bStoreToNonVolatilePath, bDirectPlay, nUseLang, bWaitEnd, bCalledFromSayAndCacheFromLight, strUseVoice ):
  "generate a text in a file, then read it, next time it will be directly played from that file"
  "bJustPrepare: render the text to a file, but don't play it now"
  "bStoreToNonVolatilePath: copy the generated file to a non volatile path (/usr/generatedvoices)"
  "nUseLang: if different of -1: speak with a specific languages (useful, when text are already generated: doesn't need to swap languages for nothing!"
  "strUseVoice: if different of None or default: use specific voice"
  "return the length of the text in seconds, or None if impossible"
  print( "sayAndCache_internal( '%s', bJustPrepare: %s, bStoreToNonVolatilePath: %s, bDirectPlay: %s, nUseLang: %d, bWaitEnd: %s, bCalledFromSayAndCacheFromLight: %s, strUseVoice: '%s' )" % ( strTextToSay, str( bJustPrepare ), str( bStoreToNonVolatilePath ), str( bDirectPlay ), nUseLang, str( bWaitEnd ), str( bCalledFromSayAndCacheFromLight ), str( strUseVoice ) ) );
  if( not config.bPrecomputeText ):
      print( "sayAndCache: disabled by configuration: bPrecomputeText is false" );
      if( bJustPrepare ):
          return None; # do nothing
      tts = naoqitools.myGetProxy( "ALTextToSpeech" );
      tts.say( strTextToSay );
      return None;
  print( "sayAndCache: FORCING DIRECT_PLAY CAR SINON C'EST BUGGE DANS LA VERSION COURANTE!");  
  bDirectPlay = True;
  
  if( strUseVoice == "default" ):
      strUseVoice = None;
  
  if( config.bRemoveDirectPlay ):
    print( "WRN: DISABLING DIRECT_PLAY SETTINGS for testing/temporary purpose" );
    bDirectPlay = False;  
  
  strTextToSay = assumeTextHasDefaultSettings( strTextToSay, nUseLang );
  szFilename = sayAndCache_getFilename( strTextToSay, nUseLang, strUseVoice );
  
  szPathVolatile = pathtools.getVolatilePath() + "generatedvoices" + pathtools.getDirectorySeparator();
  try:
    os.mkdir( szPathVolatile );
  except BaseException, err:
    pass

 def stop( self, strPathAndFilenameXar, strHostName = 'localhost' ):
     "stop a running behavior"
     "return true if the behavior was really running"
     self.log( "INF: stop: Stopping %s:%s" % ( strHostName, strPathAndFilenameXar ) );
     nNumLoadedXar = self.find( strPathAndFilenameXar, strHostName );
     if( nNumLoadedXar == -1 ):
         self.log( "WNG: stop: xar '%s:%s' is not running (perhaps currently loading - in this case, it will be stopped at the end of the loading)" % ( strHostName, strPathAndFilenameXar) );  
         # don't return there !
     try:
         mem = naoqitools.myGetProxy( "ALMemory", strHostName = strHostName );
         mem.raiseMicroEvent( self.getVarName_SoftCancel( strPathAndFilenameXar ), True );
         # pour etre sur on stoppe aussi le comportement (ca rajoute un peu plus de brutalité dans un monde de bug)
         fm = naoqitools.myGetProxy( "ALFrameManager", strHostName = strHostName );
         fm.exitBehavior( self.aLoadedXar[nNumLoadedXar][2] ); # will send a stop # mettre ici deleteBehavior si on veut liberer de la memoire (l'exit est fait dedans)            
     except BaseException, err:
         self.log( "ERR: stop: deleting '%s:%s' failure (already stopped?): err: %s" % ( strHostName, strPathAndFilenameXar, str(err) ) );
         return False;

 def __init__( self, strJointName ):
   self.strJointName = strJointName;
   self.stm = naoqitools.myGetProxy( "ALMemory" );
   self.strStmJointNameSensor = "Device/SubDeviceList/" + strJointName + "/Position/Sensor/Value";
   self.strStmJointNameActuator = "Device/SubDeviceList/" + strJointName + "/Position/Actuator/Value";
   self.strStmJointNameStiffness    = "Device/SubDeviceList/" + strJointName + "/Hardness/Actuator/Value";
   self.rDiffThreshold = 0.05;
   self.reset();