Python runner.quiet函数代码示例

def savefs_before_chroot(chrootdir, saveto = None):
    """ backup chrootdir to another directory before chrooting in """
    if configmgr.chroot['saveto']:
        savefs = True
        saveto = configmgr.chroot['saveto']
        wrnmsg = "Can't save chroot fs for dir %s exists" % saveto
        if saveto == chrootdir:
            savefs = False
            wrnmsg = "Dir %s is being used to chroot" % saveto
        elif os.path.exists(saveto):
            if msger.ask("Dir %s already exists, cleanup and continue?" %
                         saveto):
                shutil.rmtree(saveto, ignore_errors = True)
                savefs = True
            else:
                savefs = False

        if savefs:
            msger.info("Saving image to directory %s" % saveto)
            fs_related.makedirs(os.path.dirname(os.path.abspath(saveto)))
            runner.quiet("cp -af %s %s" % (chrootdir, saveto))
            devs = ['dev/fd',
                    'dev/stdin',
                    'dev/stdout',
                    'dev/stderr',
                    'etc/mtab']
            ignlst = [os.path.join(saveto, x) for x in devs]
            map(os.unlink, filter(os.path.exists, ignlst))
        else:
            msger.warning(wrnmsg)

    def _install_syslinux(self):
        i = 0
        for name in self.__disks.keys():
            loopdev = self.__disks[name].device
            i =i+1

        msger.debug("Installing syslinux bootloader to %s" % loopdev)

        (bootdevnum, rootdevnum, rootdev, prefix) = self._get_syslinux_boot_config()


        #Set MBR
        mbrsize = os.stat("%s/usr/share/syslinux/mbr.bin" % self._instroot)[stat.ST_SIZE]
        rc = runner.show(['dd', "if=%s/usr/share/syslinux/mbr.bin" % self._instroot, "of=" + loopdev])
        if rc != 0:
            raise MountError("Unable to set MBR to %s" % loopdev)

        #Set Bootable flag
        parted = fs_related.find_binary_path("parted")
        rc = runner.quiet([parted, "-s", loopdev, "set", "%d" % (bootdevnum + 1), "boot", "on"])
        #XXX disabled return code check because parted always fails to
        #reload part table with loop devices. Annoying because we can't
        #distinguish this failure from real partition failures :-(
        if rc != 0 and 1 == 0:
            raise MountError("Unable to set bootable flag to %sp%d" % (loopdev, (bootdevnum + 1)))

        #Ensure all data is flushed to disk before doing syslinux install
        runner.quiet('sync')

        fullpathsyslinux = fs_related.find_binary_path("extlinux")
        rc = runner.show([fullpathsyslinux, "-i", "%s/boot/extlinux" % self._instroot])
        if rc != 0:
            raise MountError("Unable to install syslinux bootloader to %sp%d" % (loopdev, (bootdevnum + 1)))

    def package(self, destdir = "."):
        """Prepares the created image for final delivery.

        In its simplest form, this method merely copies the install root to the
        supplied destination directory; other subclasses may choose to package
        the image by e.g. creating a bootable ISO containing the image and
        bootloader configuration.

        destdir -- the directory into which the final image should be moved;
                   this defaults to the current directory.

        """
        self._stage_final_image()

        if not os.path.exists(destdir):
            fs.makedirs(destdir)
        if self._img_compression_method:
            if not self._img_name:
                raise CreatorError("Image name not set.")
            rc = None
            img_location = os.path.join(self._outdir,self._img_name)
            if self._img_compression_method == "bz2":
                bzip2 = fs.find_binary_path('bzip2')
                msger.info("Compressing %s with bzip2. Please wait..." \
                           % img_location)
                rc = runner.show([bzip2, "-f", img_location])
                if rc:
                    raise CreatorError("Failed to compress image %s with %s." \
                                % (img_location, self._img_compression_method))

                for bootimg in glob.glob(os.path.dirname(img_location) + \
                                         "/*-boot.bin"):
                    msger.info("Compressing %s with bzip2. Please wait..." \
                               % bootimg)
                    rc = runner.show([bzip2, "-f", bootimg])
                    if rc:
                        raise CreatorError("Failed to compress image %s with "
                                           "%s." \
                                           % (bootimg,
                                              self._img_compression_method))

        if self._recording_pkgs:
            self._save_recording_pkgs(destdir)

        # For image formats with two or multiple image files, it will be
        # better to put them under a directory
        if self.image_format in ("raw", "vmdk", "vdi", "nand", "mrstnand"):
            destdir = os.path.join(destdir, "%s-%s" \
                                            % (self.name, self.image_format))
            msger.debug("creating destination dir: %s" % destdir)
            fs.makedirs(destdir)

        # Ensure all data is flushed to _outdir
        runner.quiet('sync')

        for f in os.listdir(self._outdir):
            shutil.move(os.path.join(self._outdir, f),
                        os.path.join(destdir, f))
            self.outimage.append(os.path.join(destdir, f))
            self.do_genchecksum(os.path.join(destdir, f))

    def _install_syslinux(self):
        for name in self.__disks.keys():
            loopdev = self.__disks[name].device

            # Set MBR
            mbrfile = "%s/usr/share/syslinux/" % self._instroot
            if self._ptable_format == 'gpt':
                mbrfile += "gptmbr.bin"
            else:
                mbrfile += "mbr.bin"

            msger.debug("Installing syslinux bootloader '%s' to %s" % \
                        (mbrfile, loopdev))

            rc = runner.show(['dd', 'if=%s' % mbrfile, 'of=' + loopdev])
            if rc != 0:
                raise MountError("Unable to set MBR to %s" % loopdev)


            # Ensure all data is flushed to disk before doing syslinux install
            runner.quiet('sync')

            fullpathsyslinux = fs_related.find_binary_path("extlinux")
            rc = runner.show([fullpathsyslinux,
                              "-i",
                              "%s/boot/extlinux" % self._instroot])
            if rc != 0:
                raise MountError("Unable to install syslinux bootloader to %s" \
                                 % loopdev)

def cleanup_mounts(chrootdir):
    umountcmd = misc.find_binary_path("umount")
    for point in BIND_MOUNTS:
        args = [ umountcmd, "-l", chrootdir + point ]
        runner.quiet(args)
    point = '/parentroot'
    args = [ umountcmd, "-l", chrootdir + point ]
    runner.quiet(args)

    abs_chrootdir = os.path.abspath(chrootdir)
    with open('/proc/mounts') as f:
        for line in f:
            if abs_chrootdir in line:
                point = line.split()[1]

                if abs_chrootdir == point:
                    continue

                args = [ umountcmd, "-l", point ]
                ret = runner.quiet(args)
                if ret != 0:
                    msger.warning("failed to unmount %s" % point)
                    return ret

    return 0

    def package(self, destdir="."):
        """Prepares the created image for final delivery.

        In its simplest form, this method merely copies the install root to the
        supplied destination directory; other subclasses may choose to package
        the image by e.g. creating a bootable ISO containing the image and
        bootloader configuration.

        destdir -- the directory into which the final image should be moved;
                   this defaults to the current directory.

        """
        self._stage_final_image()

        if not os.path.exists(destdir):
            fs.makedirs(destdir)

        if self._recording_pkgs:
            self._save_recording_pkgs(destdir)

        # For image formats with two or multiple image files, it will be
        # better to put them under a directory
        if self.image_format in ("raw", "vmdk", "vdi", "nand", "mrstnand"):
            destdir = os.path.join(destdir, "%s-%s" % (self.name, self.image_format))
            msger.debug("creating destination dir: %s" % destdir)
            fs.makedirs(destdir)

        # Ensure all data is flushed to _outdir
        runner.quiet("sync")

        misc.check_space_pre_cp(self._outdir, destdir)
        for f in os.listdir(self._outdir):
            shutil.move(os.path.join(self._outdir, f), os.path.join(destdir, f))
            self.outimage.append(os.path.join(destdir, f))
            self.do_genchecksum(os.path.join(destdir, f))

    def __map_partitions(self):
        """Load it if dm_snapshot isn't loaded"""
        load_module("dm_snapshot")

        for dev in self.disks.keys():
            d = self.disks[dev]
            if d['mapped']:
                continue

            msger.debug("Running kpartx on %s" % d['disk'].device )
            rc, kpartxOutput = runner.runtool([self.kpartx, "-l", "-v", d['disk'].device])
            kpartxOutput = kpartxOutput.splitlines()

            if rc != 0:
                raise MountError("Failed to query partition mapping for '%s'" %
                                 d['disk'].device)

            # Strip trailing blank and mask verbose output
            i = 0
            while i < len(kpartxOutput) and kpartxOutput[i][0:4] != "loop":
               i = i + 1
            kpartxOutput = kpartxOutput[i:]

            # Quick sanity check that the number of partitions matches
            # our expectation. If it doesn't, someone broke the code
            # further up
            if len(kpartxOutput) != d['numpart']:
                raise MountError("Unexpected number of partitions from kpartx: %d != %d" %
                                 (len(kpartxOutput), d['numpart']))

            for i in range(len(kpartxOutput)):
                line = kpartxOutput[i]
                newdev = line.split()[0]
                mapperdev = "/dev/mapper/" + newdev
                loopdev = d['disk'].device + newdev[-1]

                msger.debug("Dev %s: %s -> %s" % (newdev, loopdev, mapperdev))
                pnum = d['partitions'][i]
                self.partitions[pnum]['device'] = loopdev

                # grub's install wants partitions to be named
                # to match their parent device + partition num
                # kpartx doesn't work like this, so we add compat
                # symlinks to point to /dev/mapper
                if os.path.lexists(loopdev):
                    os.unlink(loopdev)
                os.symlink(mapperdev, loopdev)

            msger.debug("Adding partx mapping for %s" % d['disk'].device)
            rc = runner.show([self.kpartx, "-v", "-a", d['disk'].device])

            if rc != 0:
                # Make sure that the device maps are also removed on error case.
                # The d['mapped'] isn't set to True if the kpartx fails so
                # failed mapping will not be cleaned on cleanup either.
                runner.quiet([self.kpartx, "-d", d['disk'].device])
                raise MountError("Failed to map partitions for '%s'" %
                                 d['disk'].device)

            d['mapped'] = True

def load_module(module):
    found = False
    for line in open('/proc/modules').xreadlines():
        if line.startswith("%s " % module):
            found = True
            break
    if not found:
        msger.info("Loading %s..." % module)
        runner.quiet(['modprobe', module])

 def apply(self, ksrepo, repodata):
     for repo in ksrepo.repoList:
         if repo.save:
             # self.__create_repo_file(repo, "/etc/yum.repos.d")
             self.__create_repo_file(repo, "/etc/zypp/repos.d")
     """ Import repo gpg keys """
     if repodata:
         for repo in repodata:
             if repo["repokey"]:
                 runner.quiet(["rpm", "--root=%s" % self.instroot, "--import", repo["repokey"]])

def unhide_loopdev_presentation():
    global _LOOP_RULE_PTH

    if not _LOOP_RULE_PTH:
        return

    try:
        os.unlink(_LOOP_RULE_PTH)
        runner.quiet('udevadm trigger')
    except:
        pass

def _get_uncompressed_data_from_url(url, filename, proxies):
    filename = myurlgrab(url, filename, proxies)
    suffix = None
    if filename.endswith(".gz"):
        suffix = ".gz"
        runner.quiet(['gunzip', "-f", filename])
    elif filename.endswith(".bz2"):
        suffix = ".bz2"
        runner.quiet(['bunzip2', "-f", filename])
    if suffix:
        filename = filename.replace(suffix, "")
    return filename

 def unmount(self):
     if self.mounted:
         msger.debug("Unmounting directory %s" % self.mountdir)
         runner.quiet('sync') # sync the data on this mount point
         rc = runner.show([self.umountcmd, "-l", self.mountdir])
         if rc == 0:
             self.mounted = False
         else:
             raise MountError("Failed to umount %s" % self.mountdir)
     if self.rmdir and not self.mounted:
         try:
             os.rmdir(self.mountdir)
         except OSError, e:
             pass
         self.rmdir = False

 def apply(self, ksrepo, repodata, repourl):
     for repo in ksrepo.repoList:
         if repo.name in repourl:
             repo.baseurl = repourl[repo.name]
         if repo.save:
             #self.__create_repo_file(repo, "/etc/yum.repos.d")
             self.__create_repo_file(repo, "/etc/zypp/repos.d")
     """ Import repo gpg keys """
     if repodata:
         for repo in repodata:
             if repo['repokey']:
                 runner.quiet(['rpm',
                               "--root=%s" % self.instroot,
                               "--import",
                               repo['repokey']])

    def cleanup(self):

        if self.device is None:
            return


        if self._kpseek(self.device):
            runner.quiet([self.kpartxcmd, "-d", self.device])
        if self._loseek(self.device):
            runner.quiet([self.losetupcmd, "-d", self.device])
        # FIXME: should sleep a while between two loseek
        if self._loseek(self.device):
            msger.warning("Can't cleanup loop device %s" % self.device)
        elif self.loopid:
            os.unlink(self.device)

    def cleanup(self):

        if self.device is None:
            return


        if self._kpseek(self.device):
            if self.created:
                for i in range(3, os.sysconf("SC_OPEN_MAX")):
                    try:
                        os.close(i)
                    except:
                        pass
            runner.quiet([self.kpartxcmd, "-d", self.device])
        if self._loseek(self.device):
            runner.quiet([self.losetupcmd, "-d", self.device])
        # FIXME: should sleep a while between two loseek
        if self._loseek(self.device):
            msger.warning("Can't cleanup loop device %s" % self.device)
        elif self.loopid:
            os.unlink(self.device)