本文整理汇总了Python中mibuild.xilinx.XilinxPlatform.__init__方法的典型用法代码示例。如果您正苦于以下问题：Python XilinxPlatform.__init__方法的具体用法？Python XilinxPlatform.__init__怎么用？Python XilinxPlatform.__init__使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类mibuild.xilinx.XilinxPlatform的用法示例。
在下文中一共展示了XilinxPlatform.__init__方法的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Python代码示例。
示例1: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self):
XilinxPlatform.__init__(self, "xc6slx9-2csg324", _io)
self.add_platform_command("""
CONFIG VCCAUX = "3.3";
""")
self.toolchain.bitgen_opt = "-g LCK_cycle:6 -g Binary:Yes -w -g SPI_buswidth:4"
self.toolchain.ise_commands = """示例2: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self, programmer="xc3sprog"):
# XC6SLX45-2CSG324C
XilinxPlatform.__init__(self, "xc6slx45-csg324-3", _io, _connectors)
self.programmer = programmer
# FPGA AUX is connected to the 2.5V supply on the Atlys
self.add_platform_command("""CONFIG VCCAUX="2.5";""")示例3: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self, toolchain="vivado", programmer="xc3sprog"):
XilinxPlatform.__init__(self, "xc7k325t-ffg900-2", _io, _connectors,
toolchain=toolchain)
if toolchain == "ise":
self.toolchain.bitgen_opt = "-g LCK_cycle:6 -g Binary:Yes -w -g ConfigRate:12 -g SPI_buswidth:4"
elif toolchain == "vivado":
self.toolchain.bitstream_commands = ["set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 4 [current_design]"]
self.toolchain.additional_commands = ["write_cfgmem -force -format bin -interface spix4 -size 16 -loadbit \"up 0x0 {build_name}.bit\" -file {build_name}.bin"]
self.programmer = programmer示例4: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self):
XilinxPlatform.__init__(self, "xc3s500e-4pq208", _io)
self.toolchain.xst_opt = """-ifmt MIXED
-opt_level 2
-opt_mode SPEED
-register_balancing yes"""
self.toolchain.bitgen_opt += (" -g GTS_cycle:3 -g LCK_cycle:4 "
"-g GWE_cycle:5 -g DONE_cycle:6")
self.toolchain.ise_commands += """示例5: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self, programmer="openocd", vccb2_voltage="VCC3V3"):
# Some IO configurations only work at certain vccb2 voltages.
if vccb2_voltage == "VCC3V3":
_io.extend(_io_vccb2_3v3)
elif vccb2_voltage == "VCC2V5":
_io.extend(_io_vccb2_2v5)
else:
raise SystemError("Unknown vccb2_voltage=%r" % vccb2_voltage)
# Resolve the LVCMOS_BANK2 voltage level before anything uses the _io
# definition.
LVCMOS_BANK2.set(vccb2_voltage)
# XC6SLX45-2CSG324C
XilinxPlatform.__init__(self, "xc6slx45-csg324-3", _io, _connectors)
self.programmer = programmer
# FPGA AUX is connected to the 3.3V supply on the Atlys
self.add_platform_command("""CONFIG VCCAUX="3.3";""")示例6: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self, programmer="openocd"):
# XC6SLX45T-3FGG484C
XilinxPlatform.__init__(self, "xc6slx45t-fgg484-3", _io, _connectors)
self.programmer = programmer
pins = {
'ProgPin': 'PullUp',
'DonePin': 'PullUp',
'TckPin': 'PullNone',
'TdiPin': 'PullNone',
'TdoPin': 'PullNone',
'TmsPin': 'PullNone',
'UnusedPin': 'PullNone',
}
for pin, config in pins.items():
self.toolchain.bitgen_opt += " -g %s:%s " % (pin, config)
# FPGA AUX is connected to the 3.3V supply
self.add_platform_command("""CONFIG VCCAUX="3.3";""")示例7: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self, programmer="xc3sprog"):
# XC6SLX45T-3FGG484C
XilinxPlatform.__init__(self, "xc6slx45t-fgg484-3", _io, _connectors)
pins = {
"ProgPin": "PullUp",
"DonePin": "PullUp",
"TckPin": "PullNone",
"TdiPin": "PullNone",
"TdoPin": "PullNone",
"TmsPin": "PullNone",
"UnusedPin": "PullNone",
}
for pin, config in pins.items():
self.toolchain.bitgen_opt += " -g %s:%s " % (pin, config)
self.programmer = programmer
# FPGA AUX is connected to the 3.3V supply
self.add_platform_command("""CONFIG VCCAUX="3.3";""")示例8: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self, device, pins, std):
cs_n, clk, mosi, miso = pins[:4]
io = ["spiflash", 0,
Subsignal("cs_n", Pins(cs_n)),
Subsignal("mosi", Pins(mosi)),
Subsignal("miso", Pins(miso), Misc("PULLUP")),
IOStandard(std),
]
if clk:
io.append(Subsignal("clk", Pins(clk)))
for i, p in enumerate(pins[4:]):
io.append(Subsignal("pullup{}".format(i), Pins(p), Misc("PULLUP")))
XilinxPlatform.__init__(self, device, [io])
if isinstance(self.toolchain, XilinxVivadoToolchain):
self.toolchain.bitstream_commands.append(
"set_property BITSTREAM.GENERAL.COMPRESS True [current_design]"
)
elif isinstance(self.toolchain, XilinxISEToolchain):
self.toolchain.bitgen_opt += " -g compress"示例9: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self, device="xc6slx25", programmer="fpgaprog"):
self.programmer = programmer
XilinxPlatform.__init__(self, device+"-3-ftg256", _io, _connectors)示例10: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self):
XilinxPlatform.__init__(self, "xc6slx150-3csg484", _io)
self.add_platform_command("""
CONFIG VCCAUX = "2.5";
""")示例11: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self, device="xc3s200a-4-vq100"):
XilinxPlatform.__init__(self, device, _io, _connectors)
# Small device- optimize for AREA instead of SPEED (LM32 runs at about
# 60-65MHz in AREA configuration).
self.toolchain.xst_opt = """-ifmt MIXED示例12: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self):
XilinxPlatform.__init__(self, "xc3s1400a-ft256-4", _io)
self.toolchain.bitgen_opt = "-g LCK_cycle:6 -g Binary:Yes -w -g UnusedPin:PullUp"示例13: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self):
XilinxPlatform.__init__(self, "xc7z020-clg484-1", _io)示例14: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self):
XilinxPlatform.__init__(self, "xc6slx9-csg324-2", _io, _connectors)示例15: __init__
# 需要导入模块: from mibuild.xilinx import XilinxPlatform [as 别名]
# 或者: from mibuild.xilinx.XilinxPlatform import __init__ [as 别名]
def __init__(self, programmer="openocd"):
XilinxPlatform.__init__(self, "xc6slx45-csg324-3", _io, _connectors)
self.toolchain.bitgen_opt += " -g Compress -g ConfigRate:6"
self.programmer = programmer