本文整理汇总了Python中dm_utils.DMUtils.lo0_ip_comment方法的典型用法代码示例。如果您正苦于以下问题：Python DMUtils.lo0_ip_comment方法的具体用法？Python DMUtils.lo0_ip_comment怎么用？Python DMUtils.lo0_ip_comment使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类dm_utils.DMUtils的用法示例。
在下文中一共展示了DMUtils.lo0_ip_comment方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Python代码示例。
示例1: add_routing_instance
# 需要导入模块: from dm_utils import DMUtils [as 别名]
# 或者: from dm_utils.DMUtils import lo0_ip_comment [as 别名]
#.........这里部分代码省略.........
addr.set_virtual_gateway_address(gateway)
self.build_l2_evpn_interface_config(interfaces_config, interfaces, vn)
if (not is_l2 and not is_l2_l3 and gateways):
interfaces_config = self.interfaces_config or Interfaces(comment=DMUtils.interfaces_comment())
ifl_num = str(1000 + int(network_id))
lo_intf = Interface(name="lo0")
interfaces_config.add_interface(lo_intf)
intf_unit = Unit(name=ifl_num, comment=DMUtils.l3_lo_intf_comment(vn))
lo_intf.add_unit(intf_unit)
family = Family()
intf_unit.set_family(family)
inet = None
inet6 = None
for (lo_ip, _) in gateways:
subnet = lo_ip
(ip, _) = lo_ip.split('/')
if ':' in lo_ip:
if not inet6:
inet6 = FamilyInet6()
family.set_inet6(inet6)
addr = Address()
inet6.add_address(addr)
lo_ip = ip + '/' + '128'
else:
if not inet:
inet = FamilyInet()
family.set_inet(inet)
addr = Address()
inet.add_address(addr)
lo_ip = ip + '/' + '32'
addr.set_name(lo_ip)
addr.set_comment(DMUtils.lo0_ip_comment(subnet))
ri.add_interface(Interface(name="lo0." + ifl_num,
comment=DMUtils.lo0_ri_intf_comment(vn)))
# fip services config
services_config = self.services_config
if fip_map is not None:
services_config = self.services_config or Services()
services_config.set_comment(DMUtils.services_comment())
service_name = DMUtils.make_services_set_name(ri_name)
service_set = ServiceSet(name=service_name)
service_set.set_comment(DMUtils.service_set_comment(vn))
services_config.add_service_set(service_set)
nat_rule = NATRules(name=service_name + "-sn-rule")
service_set.add_nat_rules(NATRules(name=DMUtils.make_snat_rule_name(ri_name),
comment=DMUtils.service_set_nat_rule_comment(vn, "SNAT")))
service_set.add_nat_rules(NATRules(name=DMUtils.make_dnat_rule_name(ri_name),
comment=DMUtils.service_set_nat_rule_comment(vn, "DNAT")))
next_hop_service = NextHopService(inside_service_interface = interfaces[0].name,
outside_service_interface = interfaces[1].name)
service_set.set_next_hop_service(next_hop_service)
nat = NAT(allow_overlapping_nat_pools='')
nat.set_comment(DMUtils.nat_comment())
services_config.add_nat(nat)
snat_rule = Rule(name=DMUtils.make_snat_rule_name(ri_name),
match_direction="input")
snat_rule.set_comment(DMUtils.snat_rule_comment())
nat.add_rule(snat_rule)
dnat_rule = Rule(name=DMUtils.make_dnat_rule_name(ri_name),
match_direction="output")
dnat_rule.set_comment(DMUtils.dnat_rule_comment())
nat.add_rule(dnat_rule)示例2: add_routing_instance
# 需要导入模块: from dm_utils import DMUtils [as 别名]
# 或者: from dm_utils.DMUtils import lo0_ip_comment [as 别名]
#.........这里部分代码省略.........
term.set_then(Then(accept=''))
from_ = From()
term = Term(name="t1", fromxx=from_)
ps.add_term(term)
for route_target in import_targets:
from_.add_community(DMUtils.make_community_name(route_target))
if not self.is_spine():
self.add_vni_option(vni or network_id, route_target)
term.set_then(Then(accept=''))
policy_config.add_policy_statement(ps)
self.add_to_global_switch_opts(DMUtils.make_import_name(ri_name), True)
# add L2 EVPN and BD config
interfaces_config = self.interfaces_config
if (is_l2 and vni is not None and
self.is_family_configured(self.bgp_params, "e-vpn")):
# add vlan config
vlan_conf = self.add_vlan_config(ri_name, vni)
interfaces_config = self.interfaces_config or Interfaces(comment=DMUtils.interfaces_comment())
if is_l2_l3 and self.is_spine():
irb_intf = Interface(name='irb', gratuitous_arp_reply='')
interfaces_config.add_interface(irb_intf)
if gateways is not None:
intf_unit = Unit(name=str(network_id),
comment=DMUtils.vn_irb_comment(vn, False, is_l2_l3))
irb_intf.add_unit(intf_unit)
if self.is_spine():
intf_unit.set_proxy_macip_advertisement('')
family = Family()
intf_unit.set_family(family)
inet = None
inet6 = None
for (irb_ip, gateway) in gateways:
if ':' in irb_ip:
if not inet6:
inet6 = FamilyInet6()
family.set_inet6(inet6)
addr = Address()
inet6.add_address(addr)
else:
if not inet:
inet = FamilyInet()
family.set_inet(inet)
addr = Address()
inet.add_address(addr)
addr.set_name(irb_ip)
addr.set_comment(DMUtils.irb_ip_comment(irb_ip))
if len(gateway) and gateway != '0.0.0.0':
addr.set_virtual_gateway_address(gateway)
self.build_l2_evpn_interface_config(interfaces_config,
interfaces, vn, vlan_conf)
if (not is_l2 and vni is not None and
self.is_family_configured(self.bgp_params, "e-vpn")):
ri.set_vtep_source_interface("lo0.0")
evpn = self.build_evpn_config()
if evpn:
ri.set_protocols(RoutingInstanceProtocols(evpn=evpn))
#add vlans
self.add_ri_vlan_config(ri, vni)
if (not is_l2 and not is_l2_l3 and gateways):
interfaces_config = self.interfaces_config or \
Interfaces(comment=DMUtils.interfaces_comment())
ifl_num = str(1000 + int(network_id))
lo_intf = Interface(name="lo0")
interfaces_config.add_interface(lo_intf)
intf_unit = Unit(name=ifl_num, comment=DMUtils.l3_lo_intf_comment(vn))
lo_intf.add_unit(intf_unit)
family = Family()
intf_unit.set_family(family)
inet = None
inet6 = None
for (lo_ip, _) in gateways:
subnet = lo_ip
(ip, _) = lo_ip.split('/')
if ':' in lo_ip:
if not inet6:
inet6 = FamilyInet6()
family.set_inet6(inet6)
addr = Address()
inet6.add_address(addr)
lo_ip = ip + '/' + '128'
else:
if not inet:
inet = FamilyInet()
family.set_inet(inet)
addr = Address()
inet.add_address(addr)
lo_ip = ip + '/' + '32'
addr.set_name(lo_ip)
addr.set_comment(DMUtils.lo0_ip_comment(subnet))
ri.add_interface(Interface(name="lo0." + ifl_num,
comment=DMUtils.lo0_ri_intf_comment(vn)))
self.policy_config = policy_config
self.interfaces_config = interfaces_config
self.route_targets |= import_targets | export_targets
self.ri_config = ri_config