Python UnhandledExceptionHandler.singleton方法代码示例

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
    def __init__(self, port, host, num_executors=10):
        """
        :param port: The port number the slave service is running on
        :type port: int
        :param host: The hostname at which the slave is reachable
        :type host: str
        :param num_executors: The number of executors this slave should operate with -- this determines how many
            concurrent subjobs the slave can execute.
        :type num_executors: int
        """
        self.port = port
        self.host = host
        self._slave_id = None
        self._num_executors = num_executors
        self._logger = log.get_logger(__name__)

        self._idle_executors = Queue(maxsize=num_executors)
        self.executors = {}
        for executor_id in range(num_executors):
            executor = SubjobExecutor(executor_id)
            self._idle_executors.put(executor)
            self.executors[executor_id] = executor

        self._setup_complete_event = Event()
        self._master_url = None
        self._network = Network(min_connection_poolsize=num_executors)
        self._master_api = None  # wait until we connect to a master first

        self._project_type = None  # this will be instantiated during build setup
        self._current_build_id = None

        UnhandledExceptionHandler.singleton().add_teardown_callback(self._async_teardown_build,
                                                                    should_disconnect_from_master=True)

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
    def setUp(self):
        super().setUp()
        self._set_up_safe_guards()

        # Reset singletons so that they get recreated for every test that uses them.
        Configuration.reset_singleton()
        UnhandledExceptionHandler.reset_singleton()

        # Explicitly initialize UnhandledExceptionHandler singleton here (on the main thread) since it sets up signal
        # handlers that must execute on the main thread.
        UnhandledExceptionHandler.singleton()

        MasterConfigLoader().configure_defaults(Configuration.singleton())
        MasterConfigLoader().configure_postload(Configuration.singleton())
        self.patch('app.util.conf.master_config_loader.MasterConfigLoader.load_from_config_file')

        # Configure logging to go to stdout. This makes debugging easier by allowing us to see logs for failed tests.
        log.configure_logging('DEBUG')
        # Then stub out configure_logging so we don't end up logging to real files during testing.
        self.patch('app.util.log.configure_logging')

        # Set up TestHandler. This allows asserting on log messages in tests.
        self.log_handler = logbook.TestHandler(bubble=True)
        self.log_handler.push_application()

        self._base_setup_called = True

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
    def test_handles_platform_does_not_support_SIGINFO(self):
        UnhandledExceptionHandler.reset_singleton()
        mock_signal = self.patch('app.util.unhandled_exception_handler.signal')

        def register_signal_handler(sig, _):
            if sig == process_utils.SIGINFO:
                raise ValueError
        mock_signal.signal.side_effect = register_signal_handler
        UnhandledExceptionHandler.singleton()

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
 def initialize_unhandled_exception_handler():
     # Note: Unfortunately we can't use `self.assertRaises` here since this executes on a different thread.
     # todo: After exceptions in test threads are being caught, simplify this test to use self.assertRaises.
     UnhandledExceptionHandler.reset_singleton()
     try:
         UnhandledExceptionHandler.singleton()
     except Exception:
         nonlocal exception_raised
         exception_raised = True

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
    def _write_pid_file(self, filename):
        fs.write_file(str(os.getpid()), filename)

        def remove_pid_file():
            try:
                os.remove(filename)
            except OSError:
                pass
        UnhandledExceptionHandler.singleton().add_teardown_callback(remove_pid_file)

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
    def test_calling_kill_subprocesses_will_break_out_of_command_execution_wait_loop(self):

        def fake_communicate(timeout=None):
            # The fake implementation is that communicate() times out forever until os.killpg is called.
            if mock_killpg.call_count == 0 and timeout is not None:
                raise TimeoutExpired(None, timeout)
            elif mock_killpg.call_count > 0:
                return b'fake output', b'fake error'
            self.fail('Popen.communicate() should not be called without a timeout before os.killpg has been called.')

        mock_killpg = self.patch('os.killpg')
        self.mock_popen.communicate.side_effect = fake_communicate
        self.mock_popen.returncode = 1
        self.mock_popen.pid = 55555
        project_type = ProjectType()
        command_thread = SafeThread(target=project_type.execute_command_in_project, args=('echo The power is yours!',))

        # This calls execute_command_in_project() on one thread, and calls kill_subprocesses() on another. The
        # kill_subprocesses() call should cause the first thread to exit.
        command_thread.start()
        project_type.kill_subprocesses()

        # This *should* join immediately, but we specify a timeout just in case something goes wrong so that the test
        # doesn't hang. A successful join implies success. We also use the UnhandledExceptionHandler so that exceptions
        # propagate from the child thread to the test thread and fail the test.
        with UnhandledExceptionHandler.singleton():
            command_thread.join(timeout=10)
            if command_thread.is_alive():
                mock_killpg()  # Calling killpg() causes the command thread to end.
                self.fail('project_type.kill_subprocesses should cause the command execution wait loop to exit.')

        mock_killpg.assert_called_once_with(pgid=55555, sig=ANY)

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
    def _start_application(self, application, port):
        # Note: No significant application logic should be executed before this point. The call to application.listen()
        # will raise an exception if another process is using the same port. We rely on this exception to force us to
        # exit if there are any port conflicts.
        try:
            application.listen(port, '0.0.0.0')
        except OSError:
            self._logger.error('Could not start application on port {}. Is port already in use?'.format(port))
            sys.exit(1)

        ioloop = tornado.ioloop.IOLoop.instance()

        # add a teardown callback that will stop the tornado server
        stop_tornado_ioloop = functools.partial(ioloop.add_callback, callback=ioloop.stop)
        UnhandledExceptionHandler.singleton().add_teardown_callback(stop_tornado_ioloop)
        return ioloop

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
    def test_executing_build_teardown_multiple_times_will_raise_exception(self):
        self.mock_network.post().status_code = http.client.OK
        slave = self._create_cluster_slave()
        project_type_mock = self.patch('app.slave.cluster_slave.util.create_project_type').return_value
        # This test uses setup_complete_event to detect when the async fetch_project() has executed.
        setup_complete_event = Event()
        project_type_mock.fetch_project.side_effect = self.no_args_side_effect(setup_complete_event.set)
        # This test uses teardown_event to cause a thread to block on the teardown_build() call.
        teardown_event = Event()
        project_type_mock.teardown_build.side_effect = self.no_args_side_effect(teardown_event.wait)

        slave.connect_to_master(self._FAKE_MASTER_URL)
        slave.setup_build(build_id=123, project_type_params={'type': 'Fake'}, build_executor_start_index=0)
        self.assertTrue(setup_complete_event.wait(timeout=5), 'Build setup should complete very quickly.')

        # Start the first thread that does build teardown. This thread will block on teardown_build().
        first_thread = SafeThread(target=slave._do_build_teardown_and_reset)
        first_thread.start()
        # Call build teardown() again and it should raise an exception.
        with self.assertRaises(BuildTeardownError):
            slave._do_build_teardown_and_reset()

        # Cleanup: Unblock the first thread and let it finish. We use the unhandled exception handler just in case any
        # exceptions occurred on the thread (so that they'd be passed back to the main thread and fail the test).
        teardown_event.set()
        with UnhandledExceptionHandler.singleton():
            first_thread.join()

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
 def trigger_graceful_app_shutdown(self):
     """
     Helper method to easily trigger graceful shutdown. The side effect of this is that all teardown handlers that
     are registered with UnhandledExceptionHandler will be executed. This method will raise a SystemExit if an
     exception is raised in any of the teardown handlers.
     """
     with UnhandledExceptionHandler.singleton():
         raise _GracefulShutdownTrigger

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
    def _start_build(self):
        """
        Send the build request to the master for execution.
        """
        build_url = self._master_api.url('build')
        # todo: catch connection error
        response = self._network.post_with_digest(build_url, self._request_params, self._secret, error_on_failure=True)
        response_data = response.json()

        if 'error' in response_data:
            error_message = response_data['error']
            raise _BuildRunnerError('Error starting build: ' + error_message)

        self._build_id = response_data['build_id']

        UnhandledExceptionHandler.singleton().add_teardown_callback(self._cancel_build)
        self._logger.info('Build is running. (Build id: {})', self._build_id)

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
    def setUp(self):
        super().setUp()
        self.addCleanup(patch.stopall)

        self._patched_items = {}
        self._blacklist_methods_not_allowed_in_unit_tests()

        # Stub out a few library dependencies that launch subprocesses.
        self.patch('app.util.autoversioning.get_version').return_value = '0.0.0'
        self.patch('app.util.conf.base_config_loader.platform.node').return_value = self._fake_hostname

        if self._do_network_mocks:
            # requests.Session() also makes some subprocess calls on instantiation.
            self.patch('app.util.network.requests.Session')
            # Stub out Network.are_hosts_same() call with a simple string comparison.
            self.patch('app.util.network.Network.are_hosts_same', new=lambda host_a, host_b: host_a == host_b)

        # Reset singletons so that they get recreated for every test that uses them.
        Configuration.reset_singleton()
        UnhandledExceptionHandler.reset_singleton()
        SlaveRegistry.reset_singleton()

        # Explicitly initialize UnhandledExceptionHandler singleton here (on the main thread) since it sets up signal
        # handlers that must execute on the main thread.
        UnhandledExceptionHandler.singleton()

        MasterConfigLoader().configure_defaults(Configuration.singleton())
        MasterConfigLoader().configure_postload(Configuration.singleton())
        self.patch('app.util.conf.master_config_loader.MasterConfigLoader.load_from_config_file')

        # Reset counters
        Slave._slave_id_counter = Counter()
        Build._build_id_counter = Counter()
        analytics._event_id_generator = Counter()

        # Configure logging to go to stdout. This makes debugging easier by allowing us to see logs for failed tests.
        log.configure_logging('DEBUG')
        # Then stub out configure_logging so we don't end up logging to real files during testing.
        self.patch('app.util.log.configure_logging')

        # Set up TestHandler. This allows asserting on log messages in tests.
        self.log_handler = logbook.TestHandler(bubble=True)
        self.log_handler.push_application()

        self._base_setup_called = True

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
    def _start_application(self, application, port):
        # Note: No significant application logic should be executed before this point. The call to application.listen()
        # will raise an exception if another process is using the same port. We rely on this exception to force us to
        # exit if there are any port conflicts.
        try:
            # If SSL cert and key files are provided in configuration, ClusterRunner wil start with HTTPS protocol.
            # Otherwise ClusterRunner will start with HTTP protocol.
            server = HTTPServer(application, ssl_options=self._get_https_options())
            server.listen(port, '0.0.0.0')
        except OSError:
            self._logger.error('Could not start application on port {}. Is port already in use?'.format(port))
            sys.exit(1)

        ioloop = tornado.ioloop.IOLoop.instance()

        # add a teardown callback that will stop the tornado server
        stop_tornado_ioloop = functools.partial(ioloop.add_callback, callback=ioloop.stop)
        UnhandledExceptionHandler.singleton().add_teardown_callback(stop_tornado_ioloop)
        return ioloop

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
    def connect_to_master(self, master_url=None):
        """
        Notify the master that this slave exists.

        :param master_url: The URL of the master service. If none specified, defaults to localhost:43000.
        :type master_url: str | None
        """
        self.is_alive = True
        self._master_url = master_url or "localhost:43000"
        self._master_api = UrlBuilder(self._master_url)
        connect_url = self._master_api.url("slave")
        data = {"slave": "{}:{}".format(self.host, self.port), "num_executors": self._num_executors}
        response = self._network.post(connect_url, data=data)
        self._slave_id = int(response.json().get("slave_id"))
        self._logger.info("Slave {}:{} connected to master on {}.", self.host, self.port, self._master_url)

        # We disconnect from the master before build_teardown so that the master stops sending subjobs. (Teardown
        # callbacks are executed in the reverse order that they're added, so we add the build_teardown callback first.)
        UnhandledExceptionHandler.singleton().add_teardown_callback(self._do_build_teardown_and_reset, timeout=30)
        UnhandledExceptionHandler.singleton().add_teardown_callback(self._disconnect_from_master)

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
    def test_exception_on_safe_thread_calls_teardown_callbacks(self):
        my_awesome_teardown_callback = MagicMock()
        unhandled_exception_handler = UnhandledExceptionHandler.singleton()
        unhandled_exception_handler.add_teardown_callback(my_awesome_teardown_callback, 'fake arg', fake_kwarg='boop')

        def my_terrible_method():
            raise Exception('Sic semper tyrannis!')

        thread = SafeThread(target=my_terrible_method)
        thread.start()
        thread.join()

        my_awesome_teardown_callback.assert_called_once_with('fake arg', fake_kwarg='boop')

# 需要导入模块: from app.util.unhandled_exception_handler import UnhandledExceptionHandler [as 别名]
# 或者: from app.util.unhandled_exception_handler.UnhandledExceptionHandler import singleton [as 别名]
    def test_normal_execution_on_safe_thread_does_not_call_teardown_callbacks(self):
        my_lonely_teardown_callback = MagicMock()
        unhandled_exception_handler = UnhandledExceptionHandler.singleton()
        unhandled_exception_handler.add_teardown_callback(my_lonely_teardown_callback)

        def my_fantastic_method():
            print('Veritas vos liberabit!')

        thread = SafeThread(target=my_fantastic_method)
        thread.start()
        thread.join()

        self.assertFalse(my_lonely_teardown_callback.called,
                         'The teardown callback should not be called unless an exception is raised.')