Python ConfigurationAPI.set_target_height方法代码示例

# 需要导入模块: from api.configuration_api import ConfigurationAPI [as 别名]
# 或者: from api.configuration_api.ConfigurationAPI import set_target_height [as 别名]
    def test_mark_drips_should_when_target_specified(self, mock_current_z_location_mm, mock_start,mock_load,mock_save):
        fake_drip_counter = 70
        target_height = 10.0
        expected_drips_per_mm = fake_drip_counter / target_height
        
        configuration_API = ConfigurationAPI(ConfigurationManager())
        mock_load.return_value = self.DEFAULT_CONFIG.copy()
        configuration_API.load_printer('printer')
        mock_current_z_location_mm.return_value = fake_drip_counter
        
        configuration_API.start_counting_drips()
        configuration_API.set_target_height(target_height)
        configuration_API.mark_drips_at_target()

        self.assertEquals(expected_drips_per_mm, configuration_API.get_drips_per_mm())
        self.assertFalse(mock_save.called)

# 需要导入模块: from api.configuration_api import ConfigurationAPI [as 别名]
# 或者: from api.configuration_api.ConfigurationAPI import set_target_height [as 别名]
 def test_set_target_height_should_throw_when_not_numeric(self):
     configuration_API = ConfigurationAPI(ConfigurationManager())
     
     with self.assertRaises(Exception):
         configuration_API.set_target_height('a')

# 需要导入模块: from api.configuration_api import ConfigurationAPI [as 别名]
# 或者: from api.configuration_api.ConfigurationAPI import set_target_height [as 别名]
 def test_set_target_height_should_throw_when_0_or_below(self):
     configuration_API = ConfigurationAPI(ConfigurationManager())
     
     with self.assertRaises(Exception):
         configuration_API.set_target_height(0.0)

# 需要导入模块: from api.configuration_api import ConfigurationAPI [as 别名]
# 或者: from api.configuration_api.ConfigurationAPI import set_target_height [as 别名]
    def test_set_target_height_should_work_for__positive_numbers(self):
        configuration_API = ConfigurationAPI(ConfigurationManager())

        configuration_API.set_target_height(10.0)
        configuration_API.set_target_height(10)

# 需要导入模块: from api.configuration_api import ConfigurationAPI [as 别名]
# 或者: from api.configuration_api.ConfigurationAPI import set_target_height [as 别名]

#.........这里部分代码省略.........
        
        # ---------------- Microphone Dripper Frame Start -------------------------
        self.update_drips_job = None
        self.drips = 0
        self._drip_count = IntVar()

        self.drips_per_mm_field_text = DoubleVar()
        self.drips_per_mm_field_text.set(self._configuration_api.get_drips_per_mm())

        self._height_mm_entry = IntVar()
        self._height_mm_entry.set(10)

        self._average_drips = StringVar()
        self._average_drips.set(0)

        self.real_dripper_frame = LabelFrame(self, text="Microphone Dripper Setup", padx=5, pady=5)
        self.real_dripper_frame.grid(column=0,row=30, columnspan=3)

        Label(self.real_dripper_frame,text='Drips', anchor="w").grid(column=0,row=20,sticky=N+S+E+W)
        Label(self.real_dripper_frame,textvariable=self._drip_count,  anchor="w").grid(column=1,row=20,sticky=N+S+E+W)
        Label(self.real_dripper_frame,text='Drips/Second (last 10 drips)', anchor="w").grid(column=0,row=25,sticky=N+S+E+W)
        Label(self.real_dripper_frame,textvariable=self._average_drips,  anchor="w").grid(column=1,row=25,sticky=N+S+E+W)
        Button(self.real_dripper_frame,text=u"Reset Counter", command=self._reset).grid(column=2,row=20,sticky=N+S+E+W)

        Label(self.real_dripper_frame,text="End Height in Millimeters", anchor="w",justify="right").grid(column=0,row=30,sticky=N+S+E+W)
        Entry(self.real_dripper_frame, width=5, justify="left", textvariable=self._height_mm_entry, validate = 'key', validatecommand=self.validate_int_command()).grid(column=1,row=30,sticky=N+S+E+W)

        Label(self.real_dripper_frame,text="Drips per mm", anchor="w", justify="right").grid(column=0,row=40,sticky=N+S+E+W)
        Label(self.real_dripper_frame,textvariable=self.drips_per_mm_field_text, anchor="w").grid(column=1,row=40,sticky=N+S+E+W)
        Button(self.real_dripper_frame,text=u"Mark", command=self._mark).grid(column=2,row=40,sticky=N+S+E+W)

        Label(self.real_dripper_frame).grid(column=1,row=45)

        self.real_dripper_frame.grid_remove()
        # ---------------- Microphone Dripper Frame Stop -------------------------
        # ---------------- Manual Dripper Frame Start ----------------------------
        self._drips_per_second = DoubleVar()
        self._drips_per_second.set(self._configuration_api.get_emulated_drips_per_second())

        self.fake_dripper_frame = LabelFrame(self, text="Emulated Dripper Setup", padx=5, pady=5)
        self.fake_dripper_frame.grid(column=0,row=40, columnspan=3,sticky=N+S+E+W)
        self.fake_dripper_frame.grid_remove()

        Label(self.fake_dripper_frame, text="Drips per second").grid(column=1,row=10)
        Entry(self.fake_dripper_frame, textvariable=self._drips_per_second).grid(column=2,row=10)
        # ---------------- Manual Dripper Frame Stop ----------------------------

        Button(self,text=u"Save", command=self._save).grid(column=2,row=50,sticky=NSEW) 
        Button(self,text=u"Back", command=self._back).grid(column=0,row=50,sticky=N+S+E+W)
        
        ## destory Automaticness
        self._dripper_type_changed()
        self.update()

    def _dripper_type_changed(self):
        if self._dripper_type.get() == 'audio':
            self._configuration_api.set_dripper_type('audio')
            self.fake_dripper_frame.grid_remove()
            self.real_dripper_frame.grid()
            self._configuration_api.start_counting_drips(drip_call_back = self._drips_updated)
        elif self._dripper_type.get() == 'emulated':
            self._configuration_api.set_dripper_type('emulated')
            self._configuration_api.stop_counting_drips()
            self.real_dripper_frame.grid_remove()
            self.fake_dripper_frame.grid()
        else:
            raise Exception('Unsupported Dripper: %s ' % self._dripper_type.get() )

    def _drips_updated(self, drips, height, drips_per_second):
        self._drip_count.set(drips)
        self._average_drips.set("%0.2f" % drips_per_second)

    def _reset(self):
        self._configuration_api.reset_drips()

    def _back(self):
        self.navigate(SetupUI)

    def _help(self):
        PopUp(self,'Help', help_text.setup_drip_calibration_help)

    def _mark(self):
        try:
            self._configuration_api.set_target_height(self._height_mm_entry.get())
            self._configuration_api.mark_drips_at_target()
            self.drips_per_mm_field_text.set(self._configuration_api.get_drips_per_mm())
        except Exception as ex:
            tkMessageBox.showwarning(
            "Error",
            ex.message
        )

    def _save(self):
        self._configuration_api.set_emulated_drips_per_second(self._drips_per_second.get())
        self._configuration_api.stop_counting_drips()
        self._configuration_api.save()
        self.navigate(SetupUI)

    def close(self):
        self._configuration_api.stop_counting_drips()

# 需要导入模块: from api.configuration_api import ConfigurationAPI [as 别名]
# 或者: from api.configuration_api.ConfigurationAPI import set_target_height [as 别名]
class DripCalibrationUI(PeachyFrame, FieldValidations):
    
    def initialize(self):
        self._current_printer = self.kwargs['printer']
        self._configuration_api = ConfigurationAPI(self._configuration_manager)
        self._configuration_api.load_printer(self._current_printer)

        self.update_drips_job = None
        self.drips = 0
        self._drip_count = IntVar()
        self.grid()

        self.drips_per_mm_field_text = DoubleVar()
        self.drips_per_mm_field_text.set(self._configuration_api.get_drips_per_mm())

        self._height_mm_entry = IntVar()
        self._height_mm_entry.set(10)

        Label(self, text = 'Printer: ').grid(column=0,row=10)
        Label(self, text = self._configuration_api.current_printer()).grid(column=1,row=10)
        Button(self, text='?', command=self._help).grid(column=2, row=10,stick=N+E)
        
        Label(self).grid(column=1,row=15)

        Label(self,text='Drips', anchor="w").grid(column=0,row=20,sticky=N+S+E+W)
        Label(self,textvariable=self._drip_count,  anchor="w").grid(column=1,row=20,sticky=N+S+E+W)
        Button(self,text=u"Reset Counter", command=self._reset).grid(column=2,row=20,sticky=N+S+E+W)

        Label(self,text="End Height in Millimeters", anchor="w",justify="right").grid(column=0,row=30,sticky=N+S+E+W)
        Entry(self, width=5, justify="left", textvariable=self._height_mm_entry, validate = 'key', validatecommand=self.validate_int_command()).grid(column=1,row=30,sticky=N+S+E+W)

        Label(self,text="Drips per mm", anchor="w", justify="right").grid(column=0,row=40,sticky=N+S+E+W)
        Label(self,textvariable=self.drips_per_mm_field_text, anchor="w").grid(column=1,row=40,sticky=N+S+E+W)
        Button(self,text=u"Mark", command=self._mark).grid(column=2,row=40,sticky=N+S+E+W)

        Label(self).grid(column=1,row=45)

        self._save_button = Button(self,text=u"Save", command=self._save, state=DISABLED)
        self._save_button.grid(column=2,row=50,sticky=NSEW) 
        Button(self,text=u"Back", command=self._back).grid(column=0,row=50,sticky=N+S+E+W)
        self._configuration_api.start_counting_drips(drip_call_back = self._drips_updated)
        self.update()

    def _drips_updated(self, drips, height):
        self._drip_count.set(drips)

    def _reset(self):
        self._configuration_api.reset_drips()

    def _back(self):
        self.navigate(SetupUI)

    def _help(self):
        PopUp(self,'Help', help_text.setup_drip_calibration_help)

    def _mark(self):
        try:
            self._configuration_api.set_target_height(self._height_mm_entry.get())
            self._configuration_api.mark_drips_at_target()
            self.drips_per_mm_field_text.set(self._configuration_api.get_drips_per_mm())
            self._save_button.config(state = NORMAL)
        except Exception as ex:
            tkMessageBox.showwarning(
            "Error",
            ex.message
        )

    def _save(self):
        self._configuration_api.stop_counting_drips()
        self._configuration_api.save()
        self.navigate(SetupUI)

    def close(self):
        self._configuration_api.stop_counting_drips()