Python ProcessDialog.apply方法代码示例

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_geomfilter_trips(self, event=None):
        """
        Select GPS traces to satisfy geometric requirements.
        This should be done before the mapmatching process. 
        """
        p = mapmatching.TripGeomfilter(self._mapmatching, logger=self._mainframe.get_logger())
        dlg = ProcessDialog(self._mainframe, p, immediate_apply=True)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            # apply current widget values to scenario instance
            dlg.apply()
            dlg.Destroy()
            self._mainframe.browse_obj(self._mapmatching.trips)
            self._is_needs_refresh = True
            self.refresh_widgets()

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_generate_tls(self, event=None):
        """Generates traffic light systems"""
        # TODO: here we should actually replace the current network
        # so we would need a clear net method in scenario
        # alternatively we could merge properly
        obj = networktools.TlsGenerator(self._net, logger=self._mainframe.get_logger())
        dlg = ProcessDialog(self._mainframe, obj)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            dlg.apply()
            dlg.Destroy()

            self._mainframe.browse_obj(self._net)

            # this should update all widgets for the new scenario!!
            # print 'call self._mainframe.refresh_moduleguis()'
            self._mainframe.refresh_moduleguis()

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_import_turnflows(self, event=None):
        tfimporter = turnflows.TurnflowImporter(self._demand.turnflows,
                                                logger=self._mainframe.get_logger()
                                                )
        dlg = ProcessDialog(self._mainframe, tfimporter)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            # apply current widget values to scenario instance
            dlg.apply()
            dlg.Destroy()
            self._mainframe.browse_obj(self._demand.turnflows)
            #del self._scenario
            #self._scenario = scenariocreator.get_scenario()
            # self._scenario.import_xml()
            # this should update all widgets for the new scenario!!
            # print 'call self._mainframe.refresh_moduleguis()'
            # self._mainframe.refresh_moduleguis()

        if event:
            event.Skip()

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_route_fastest(self, event=None):
        """
        Fastest path routing of matched routes.
        """
        p = mapmatching.Fastestrouter('fastestpathrouter', self._mapmatching,
                                      matchresults=self._results,
                                      logger=self._mainframe.get_logger()
                                      )
        dlg = ProcessDialog(self._mainframe, p, immediate_apply=True)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            # apply current widget values to scenario instance
            dlg.apply()
            dlg.Destroy()
            self._mainframe.browse_obj(self._mapmatching.trips)
            self._is_needs_refresh = True
            self.refresh_widgets()

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_import_osm(self, event=None):
        # TODO: here we should actually replace the current network
        # so we would need a clear net method in scenario
        # alternatively we could merge properly
        importer = network.OsmImporter(self._net, logger=self._mainframe.get_logger())
        dlg = ProcessDialog(self._mainframe, importer)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            # apply current widget values to scenario instance
            dlg.apply()
            dlg.Destroy()

            self._mainframe.browse_obj(self._net.nodes)

            # this should update all widgets for the new scenario!!
            # print 'call self._mainframe.refresh_moduleguis()'
            self._mainframe.refresh_moduleguis()

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_import_gpx(self, event=None):
        """
        Import and filter data from GPX file. 
        """
        p = mapmatching.GpxImporter(self._mapmatching, logger=self._mainframe.get_logger())
        dlg = ProcessDialog(self._mainframe, p, immediate_apply=True)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            # apply current widget values to scenario instance
            dlg.apply()
            dlg.Destroy()
            self._mainframe.browse_obj(self._mapmatching.trips)
            self._is_needs_refresh = True
            self.refresh_widgets()

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_match_birgil(self, event=None):
        """
        Match selected traces with Birgillito's method. 
        """
        p = mapmatching.BirgilMatcher(self._mapmatching, logger=self._mainframe.get_logger())

        # dlg = ProcessDialogInteractive( self._mainframe,
        #                                p,
        #                                #title = 'SUMO-Traci Dialog',
        #                                #func_close = self.close_sumodialog_interactive,
        #                                )

        dlg = ProcessDialog(self._mainframe, p, immediate_apply=True)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            # apply current widget values to scenario instance
            dlg.apply()
            dlg.Destroy()
            self._mainframe.browse_obj(self._mapmatching.trips)
            self._is_needs_refresh = True
            self.refresh_widgets()

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_postmatchfilter_trips(self, event=None):
        """
        Select trips by different parameters to ensure the quality of the mapmatching results.
        This should be done after the map-matching process. 
        """
        p = mapmatching.PostMatchfilter(self._mapmatching, logger=self._mainframe.get_logger())
        dlg = ProcessDialog(self._mainframe, p, immediate_apply=True)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            # apply current widget values to scenario instance
            dlg.apply()
            dlg.Destroy()
            self._mainframe.browse_obj(self._mapmatching.trips)
            self._is_needs_refresh = True
            self.refresh_widgets()

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_route_congested(self, event=None):
        """Generates routes from current trip info using routing methods with congested network assumption.
        Based on marouter.
        """
        # self._demand.trips.clear_routes()

        obj = routing.MacroRouter(self.get_scenario().net,
                                  trips=self._demand.trips,
                                  logger=self._mainframe.get_logger())

        dlg = ProcessDialog(self._mainframe, obj)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            dlg.apply()
            dlg.Destroy()

            self._mainframe.browse_obj(self._demand.trips)

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_create(self, event=None):
        # print 'on_create'
        scenariocreator = scenario.ScenarioCreator(logger=self._mainframe.get_logger(),
                                                   workdirpath=scenario.DIRPATH_SCENARIO,
                                                   )
        dlg = ProcessDialog(self._mainframe, scenariocreator)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            # apply current widget values to scenario instance
            dlg.apply()
            dlg.Destroy()

            del self._scenario
            self._scenario = scenariocreator.get_scenario()
            self._mainframe.browse_obj(self._scenario)
            # this should update all widgets for the new scenario!!
            # print 'call self._mainframe.refresh_moduleguis()'
            self._mainframe.refresh_moduleguis()

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_make_parking(self, event=None):
        """
        Generate on road parking areas on the street network
        """
        # self._landuse.parking.make_parking()
        #self._canvas = canvas.draw()
        #drawing = self.get_drawing().get_drawobj_by_ident('parkingdraws')

        # TODO: make a proper import mask that allows to set parameters
        # self._landuse.maps.download()
        proc = landuse.ParkingGenerator('parkinggenerator', self._landuse.parking, logger=self._mainframe.get_logger())
        dlg = ProcessDialog(self._mainframe, proc, immediate_apply=True)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            # apply current widget values to scenario instance
            dlg.apply()
            dlg.Destroy()
            self._mainframe.browse_obj(self._landuse.parking)
            self._mainframe.refresh_moduleguis()

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_import_osm(self, event=None):
        importer = landuse.OsmPolyImporter(
            self._landuse, logger=self._mainframe.get_logger())
        dlg = ProcessDialog(self._mainframe, importer)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            dlg.Destroy()

        if dlg.get_status() == 'success':
            dlg.apply()
            dlg.Destroy()
            self._mainframe.browse_obj(self._landuse)
            self._mainframe.refresh_moduleguis()

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_add_vehicles(self, event=None):
        p = prt.VehicleAdder(self._prtservice.prtvehicles, logger=self._mainframe.get_logger())
        dlg = ProcessDialog(self._mainframe, p, immediate_apply=True)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            # apply current widget values to scenario instance
            dlg.apply()
            dlg.Destroy()
            self._mainframe.browse_obj(self._prtservice.prtvehicles)

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_import_osmnx(self, event=None):
        """
        Import net and buildings from OSMnx
        """

        # proc = OxScenariocreator(\
        #                            workdirpath = scenario.DIRPATH_SCENARIO,
        #                            logger = self._mainframe.get_logger(),
        #                            )

        proc = networkxtools.OxImporter(self._scenario,
                                        logger=self._mainframe.get_logger(),
                                        )

        dlg = ProcessDialog(self._mainframe, proc)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            # apply current widget values to scenario instance
            dlg.apply()
            dlg.Destroy()

            #del self._scenario
            #self._scenario = scenariocreator.get_scenario()

            # self._scenario.import_xml()
            self._mainframe.browse_obj(self._scenario)
            # this should update all widgets for the new scenario!!
            # print 'call self._mainframe.refresh_moduleguis()'
            self._mainframe.refresh_moduleguis()

# 需要导入模块: from agilepy.lib_wx.processdialog import ProcessDialog [as 别名]
# 或者: from agilepy.lib_wx.processdialog.ProcessDialog import apply [as 别名]
    def on_import_turnflows(self, event=None):
        tfimporter = turnflows.TurnflowImporter(self._demand.turnflows,
                                                logger=self._mainframe.get_logger()
                                                )
        dlg = ProcessDialog(self._mainframe, tfimporter)

        dlg.CenterOnScreen()

        # this does not return until the dialog is closed.
        val = dlg.ShowModal()
        # print '  val,val == wx.ID_OK',val,wx.ID_OK,wx.ID_CANCEL,val == wx.ID_CANCEL
        # print '  status =',dlg.get_status()
        if dlg.get_status() != 'success':  # val == wx.ID_CANCEL:
            # print ">>>>>>>>>Unsuccessful\n"
            dlg.Destroy()

        if dlg.get_status() == 'success':
            # print ">>>>>>>>>successful\n"
            # apply current widget values to scenario instance
            dlg.apply()
            dlg.Destroy()
            self._mainframe.browse_obj(self._demand.turnflows)