Python ContainerStack.getMetaDataEntry方法代码示例

# 需要导入模块: from UM.Settings.ContainerStack import ContainerStack [as 别名]
# 或者: from UM.Settings.ContainerStack.ContainerStack import getMetaDataEntry [as 别名]
    def _buildExtruderMessage(self, stack: ContainerStack) -> None:
        message = self._slice_message.addRepeatedMessage("extruders")
        message.id = int(stack.getMetaDataEntry("position"))
        if not self._all_extruders_settings:
            self._cacheAllExtruderSettings()

        if self._all_extruders_settings is None:
            return

        extruder_nr = stack.getProperty("extruder_nr", "value")
        settings = self._all_extruders_settings[str(extruder_nr)].copy()

        # Also send the material GUID. This is a setting in fdmprinter, but we have no interface for it.
        settings["material_guid"] = stack.material.getMetaDataEntry("GUID", "")

        # Replace the setting tokens in start and end g-code.
        extruder_nr = stack.getProperty("extruder_nr", "value")
        settings["machine_extruder_start_code"] = self._expandGcodeTokens(settings["machine_extruder_start_code"], extruder_nr)
        settings["machine_extruder_end_code"] = self._expandGcodeTokens(settings["machine_extruder_end_code"], extruder_nr)

        for key, value in settings.items():
            # Do not send settings that are not settable_per_extruder.
            if not stack.getProperty(key, "settable_per_extruder"):
                continue
            setting = message.getMessage("settings").addRepeatedMessage("settings")
            setting.name = key
            setting.value = str(value).encode("utf-8")
            Job.yieldThread()

# 需要导入模块: from UM.Settings.ContainerStack import ContainerStack [as 别名]
# 或者: from UM.Settings.ContainerStack.ContainerStack import getMetaDataEntry [as 别名]
    def addExtruder(self, extruder: ContainerStack) -> None:
        position = extruder.getMetaDataEntry("position")
        if position is None:
            Logger.log("w", "No position defined for extruder {extruder}, cannot add it to stack {stack}", extruder = extruder.id, stack = self.id)
            return

        if any(item.getId() == extruder.id for item in self._extruders.values()):
            Logger.log("w", "Extruder [%s] has already been added to this stack [%s]", extruder.id, self.getId())
            return

        self._extruders[position] = extruder
        Logger.log("i", "Extruder[%s] added to [%s] at position [%s]", extruder.id, self.id, position)

# 需要导入模块: from UM.Settings.ContainerStack import ContainerStack [as 别名]
# 或者: from UM.Settings.ContainerStack.ContainerStack import getMetaDataEntry [as 别名]
    def addExtruder(self, extruder: ContainerStack) -> None:
        extruder_count = self.getProperty("machine_extruder_count", "value")
        if extruder_count and len(self._extruders) + 1 > extruder_count:
            Logger.log("w", "Adding extruder {meta} to {id} but its extruder count is {count}".format(id = self.id, count = extruder_count, meta = str(extruder.getMetaData())))
            return

        position = extruder.getMetaDataEntry("position")
        if position is None:
            Logger.log("w", "No position defined for extruder {extruder}, cannot add it to stack {stack}", extruder = extruder.id, stack = self.id)
            return

        if any(item.getId() == extruder.id for item in self._extruders.values()):
            Logger.log("w", "Extruder [%s] has already been added to this stack [%s]", extruder.id, self._id)
            return
        self._extruders[position] = extruder

# 需要导入模块: from UM.Settings.ContainerStack import ContainerStack [as 别名]
# 或者: from UM.Settings.ContainerStack.ContainerStack import getMetaDataEntry [as 别名]
    def addExtruder(self, extruder: ContainerStack) -> None:
        extruder_count = self.getProperty("machine_extruder_count", "value")

        if extruder_count <= 1:
            Logger.log("i", "Not adding extruder[%s] to [%s] because it is a single-extrusion machine.",
                       extruder.id, self.id)
            return

        position = extruder.getMetaDataEntry("position")
        if position is None:
            Logger.log("w", "No position defined for extruder {extruder}, cannot add it to stack {stack}", extruder = extruder.id, stack = self.id)
            return

        if any(item.getId() == extruder.id for item in self._extruders.values()):
            Logger.log("w", "Extruder [%s] has already been added to this stack [%s]", extruder.id, self._id)
            return

        self._extruders[position] = extruder
        Logger.log("i", "Extruder[%s] added to [%s] at position [%s]", extruder.id, self.id, position)

# 需要导入模块: from UM.Settings.ContainerStack import ContainerStack [as 别名]
# 或者: from UM.Settings.ContainerStack.ContainerStack import getMetaDataEntry [as 别名]
    def read(self, file_name):
        # Load all the nodes / meshdata of the workspace
        nodes = self._3mf_mesh_reader.read(file_name)
        if nodes is None:
            nodes = []

        archive = zipfile.ZipFile(file_name, "r")

        cura_file_names = [name for name in archive.namelist() if name.startswith("Cura/")]

        # Create a shadow copy of the preferences (we don't want all of the preferences, but we do want to re-use its
        # parsing code.
        temp_preferences = Preferences()
        temp_preferences.readFromFile(io.TextIOWrapper(archive.open("Cura/preferences.cfg")))  # We need to wrap it, else the archive parser breaks.

        # Copy a number of settings from the temp preferences to the global
        global_preferences = Preferences.getInstance()
        global_preferences.setValue("general/visible_settings", temp_preferences.getValue("general/visible_settings"))
        global_preferences.setValue("cura/categories_expanded", temp_preferences.getValue("cura/categories_expanded"))
        Application.getInstance().expandedCategoriesChanged.emit()  # Notify the GUI of the change

        self._id_mapping = {}

        # We don't add containers right away, but wait right until right before the stack serialization.
        # We do this so that if something goes wrong, it's easier to clean up.
        containers_to_add = []

        # TODO: For the moment we use pretty naive existence checking. If the ID is the same, we assume in quite a few
        # TODO: cases that the container loaded is the same (most notable in materials & definitions).
        # TODO: It might be possible that we need to add smarter checking in the future.
        Logger.log("d", "Workspace loading is checking definitions...")
        # Get all the definition files & check if they exist. If not, add them.
        definition_container_files = [name for name in cura_file_names if name.endswith(self._definition_container_suffix)]
        for definition_container_file in definition_container_files:
            container_id = self._stripFileToId(definition_container_file)
            definitions = self._container_registry.findDefinitionContainers(id=container_id)
            if not definitions:
                definition_container = DefinitionContainer(container_id)
                definition_container.deserialize(archive.open(definition_container_file).read().decode("utf-8"))
                self._container_registry.addContainer(definition_container)

        Logger.log("d", "Workspace loading is checking materials...")
        material_containers = []
        # Get all the material files and check if they exist. If not, add them.
        xml_material_profile = self._getXmlProfileClass()
        if self._material_container_suffix is None:
            self._material_container_suffix = ContainerRegistry.getMimeTypeForContainer(xml_material_profile).suffixes[0]
        if xml_material_profile:
            material_container_files = [name for name in cura_file_names if name.endswith(self._material_container_suffix)]
            for material_container_file in material_container_files:
                container_id = self._stripFileToId(material_container_file)
                materials = self._container_registry.findInstanceContainers(id=container_id)
                if not materials:
                    material_container = xml_material_profile(container_id)
                    material_container.deserialize(archive.open(material_container_file).read().decode("utf-8"))
                    containers_to_add.append(material_container)
                else:
                    if not materials[0].isReadOnly():  # Only create new materials if they are not read only.
                        if self._resolve_strategies["material"] == "override":
                            materials[0].deserialize(archive.open(material_container_file).read().decode("utf-8"))
                        elif self._resolve_strategies["material"] == "new":
                            # Note that we *must* deserialize it with a new ID, as multiple containers will be
                            # auto created & added.
                            material_container = xml_material_profile(self.getNewId(container_id))
                            material_container.deserialize(archive.open(material_container_file).read().decode("utf-8"))
                            containers_to_add.append(material_container)
                            material_containers.append(material_container)

        Logger.log("d", "Workspace loading is checking instance containers...")
        # Get quality_changes and user profiles saved in the workspace
        instance_container_files = [name for name in cura_file_names if name.endswith(self._instance_container_suffix)]
        user_instance_containers = []
        quality_changes_instance_containers = []
        for instance_container_file in instance_container_files:
            container_id = self._stripFileToId(instance_container_file)
            instance_container = InstanceContainer(container_id)

            # Deserialize InstanceContainer by converting read data from bytes to string
            instance_container.deserialize(archive.open(instance_container_file).read().decode("utf-8"))
            container_type = instance_container.getMetaDataEntry("type")
            if container_type == "user":
                # Check if quality changes already exists.
                user_containers = self._container_registry.findInstanceContainers(id=container_id)
                if not user_containers:
                    containers_to_add.append(instance_container)
                else:
                    if self._resolve_strategies["machine"] == "override":
                        user_containers[0].deserialize(archive.open(instance_container_file).read().decode("utf-8"))
                    elif self._resolve_strategies["machine"] == "new":
                        # The machine is going to get a spiffy new name, so ensure that the id's of user settings match.
                        extruder_id = instance_container.getMetaDataEntry("extruder", None)
                        if extruder_id:
                            new_id = self.getNewId(extruder_id) + "_current_settings"
                            instance_container._id = new_id
                            instance_container.setName(new_id)
                            instance_container.setMetaDataEntry("extruder", self.getNewId(extruder_id))
                            containers_to_add.append(instance_container)

                        machine_id = instance_container.getMetaDataEntry("machine", None)
                        if machine_id:
#.........这里部分代码省略.........