Python QToolButton.setMenu方法代码示例

# 需要导入模块: from PyQt4.Qt import QToolButton [as 别名]
# 或者: from PyQt4.Qt.QToolButton import setMenu [as 别名]
 def setupUi(self):
     """
     Setup the UI for the command toolbar.
     """
     #ninad 070123 : It's important to set the Vertical size policy of the 
     # cmd toolbar widget. otherwise the flyout QToolbar messes up the 
     #layout (makes the command toolbar twice as big) 
     #I have set the vertical policy as fixed. Works fine. There are some 
     # MainWindow resizing problems for but those are not due to this 
     #size policy AFAIK        
     self.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Fixed)
             
     layout_cmdtoolbar = QHBoxLayout(self)
     layout_cmdtoolbar.setMargin(2)
     layout_cmdtoolbar.setSpacing(2)
     
     #See comment at the top for details about this flag
     if DEFINE_CONTROL_AREA_AS_A_QWIDGET:
         self.cmdToolbarControlArea = QWidget(self)    
     else:
         self.cmdToolbarControlArea = QToolBar_WikiHelp(self)
         
     self.cmdToolbarControlArea.setAutoFillBackground(True)
             
     self.ctrlAreaPalette = self.getCmdMgrCtrlAreaPalette()  
     self.cmdToolbarControlArea.setPalette(self.ctrlAreaPalette)
             
     self.cmdToolbarControlArea.setMinimumHeight(62)
     self.cmdToolbarControlArea.setMinimumWidth(380)
     self.cmdToolbarControlArea.setSizePolicy(QSizePolicy.Fixed, 
                                              QSizePolicy.Fixed)  
     
     #See comment at the top for details about this flag
     if DEFINE_CONTROL_AREA_AS_A_QWIDGET:
         layout_controlArea = QHBoxLayout(self.cmdToolbarControlArea)
         layout_controlArea.setMargin(0)
         layout_controlArea.setSpacing(0)
     
     self.cmdButtonGroup = QButtonGroup()    
     btn_index = 0
     
     for name in ('Build', 'Insert', 'Tools', 'Move', 'Simulation'):
         btn = QToolButton(self.cmdToolbarControlArea)           
         btn.setObjectName(name)
         btn.setMinimumWidth(75)
         btn.setMaximumWidth(75)
         btn.setMinimumHeight(62)
         btn.setAutoRaise(True)
         btn.setCheckable(True)
         btn.setAutoExclusive(True)
         iconpath = "ui/actions/Command Toolbar/ControlArea/" + name + ".png"
         btn.setIcon(geticon(iconpath))
         btn.setIconSize(QSize(22, 22))
         btn.setText(name)
         btn.setToolButtonStyle(Qt.ToolButtonTextUnderIcon)
         btn.setPalette(self.ctrlAreaPalette)
         self.cmdButtonGroup.addButton(btn, btn_index)
         btn_index += 1        
         #See comment at the top for details about this flag
         if DEFINE_CONTROL_AREA_AS_A_QWIDGET:
             layout_controlArea.addWidget(btn)
         else:
             self.cmdToolbarControlArea.layout().addWidget(btn)                
             #following has issues. so not adding widget directly to the 
             #toolbar. (instead adding it in its layout)-- ninad 070124
             ##self.cmdToolbarControlArea.addWidget(btn)      
     
     layout_cmdtoolbar.addWidget(self.cmdToolbarControlArea) 
     
     #Flyout Toolbar in the command toolbar  
     self.flyoutToolBar = FlyoutToolBar(self)
     
     layout_cmdtoolbar.addWidget(self.flyoutToolBar)   
     
     #ninad 070116: Define a spacer item. It will have the exact geometry 
     # as that of the flyout toolbar. it is added to the command toolbar 
     # layout only when the Flyout Toolbar is hidden. It is required
     # to keep the 'Control Area' widget fixed in its place (otherwise, 
     #after hiding the flyout toolbar, the layout adjusts the position of 
     #remaining widget items) 
     
     self.spacerItem = QSpacerItem(0, 
                                   0, 
                                   QtGui.QSizePolicy.Expanding, 
                                   QtGui.QSizePolicy.Minimum)
     self.spacerItem.setGeometry = self.flyoutToolBar.geometry()
     
     for btn in self.cmdButtonGroup.buttons():
         if str(btn.objectName()) == 'Build':
             btn.setMenu(self.win.buildStructuresMenu)
             btn.setPopupMode(QToolButton.MenuButtonPopup)
             btn.setToolTip("Build Commands")
             whatsThisTextForCommandToolbarBuildButton(btn)
         if str(btn.objectName()) == 'Insert':
             btn.setMenu(self.win.insertMenu)
             btn.setPopupMode(QToolButton.MenuButtonPopup)
             btn.setToolTip("Insert Commands")
             whatsThisTextForCommandToolbarInsertButton(btn)
         if str(btn.objectName()) == 'Tools':
             #fyi: cmd stands for 'command toolbar' - ninad070406
#.........这里部分代码省略.........

# 需要导入模块: from PyQt4.Qt import QToolButton [as 别名]
# 或者: from PyQt4.Qt.QToolButton import setMenu [as 别名]

#.........这里部分代码省略.........
        lo0.addLayout(lo1, 0)
        self._range_validator = FloatValidator(self)
        self._wrange = QLineEdit(self), QLineEdit(self)
        self._wrange[0].setToolTip("""<P>This is the low end of the intensity range.</P>""")
        self._wrange[1].setToolTip("""<P>This is the high end of the intensity range.</P>""")
        for w in self._wrange:
            w.setValidator(self._range_validator)
            QObject.connect(w, SIGNAL("editingFinished()"), self._changeDisplayRange)
        lo1.addWidget(QLabel("low:", self), 0)
        lo1.addWidget(self._wrange[0], 1)
        self._wrangeleft0 = self.makeButton("\u21920", self._setZeroLeftLimit, width=32)
        self._wrangeleft0.setToolTip("""<P>Click this to set the low end of the intensity range to 0.</P>""")
        lo1.addWidget(self._wrangeleft0, 0)
        lo1.addSpacing(8)
        lo1.addWidget(QLabel("high:", self), 0)
        lo1.addWidget(self._wrange[1], 1)
        lo1.addSpacing(8)
        self._wrange_full = self.makeButton(None, self._setHistDisplayRange, icon=pixmaps.intensity_graph.icon())
        lo1.addWidget(self._wrange_full)
        self._wrange_full.setToolTip(
            """<P>Click this to reset the intensity range to the current extent of the histogram plot.</P>""")
        # add menu for display range
        range_menu = QMenu(self)
        wrange_menu = QToolButton(self)
        wrange_menu.setText("Reset to")
        wrange_menu.setToolTip("""<P>Use this to reset the intensity range to various pre-defined settings.</P>""")
        lo1.addWidget(wrange_menu)
        self._qa_range_full = range_menu.addAction(pixmaps.full_range.icon(), "Full subset",
                                                   self._rc.resetSubsetDisplayRange)
        self._qa_range_hist = range_menu.addAction(pixmaps.intensity_graph.icon(), "Current histogram limits",
                                                   self._setHistDisplayRange)
        for percent in (99.99, 99.9, 99.5, 99, 98, 95):
            range_menu.addAction("%g%%" % percent, self._currier.curry(self._changeDisplayRangeToPercent, percent))
        wrange_menu.setMenu(range_menu)
        wrange_menu.setPopupMode(QToolButton.InstantPopup)

        lo1 = QGridLayout()
        lo1.setContentsMargins(0, 0, 0, 0)
        lo0.addLayout(lo1, 0)
        self._wimap = QComboBox(self)
        lo1.addWidget(QLabel("Intensity policy:", self), 0, 0)
        lo1.addWidget(self._wimap, 1, 0)
        self._wimap.addItems(rc.getIntensityMapNames())
        QObject.connect(self._wimap, SIGNAL("currentIndexChanged(int)"), self._rc.setIntensityMapNumber)
        self._wimap.setToolTip("""<P>Use this to change the type of the intensity transfer function (ITF).</P>""")

        # log cycles control
        lo1.setColumnStretch(1, 1)
        self._wlogcycles_label = QLabel("Log cycles: ", self)
        lo1.addWidget(self._wlogcycles_label, 0, 1)
        #    self._wlogcycles = QwtWheel(self)
        #    self._wlogcycles.setTotalAngle(360)
        self._wlogcycles = QwtSlider(self)
        self._wlogcycles.setToolTip(
            """<P>Use this to change the log-base for the logarithmic intensity transfer function (ITF).</P>""")
        # This works around a stupid bug in QwtSliders -- see comments on histogram zoom wheel above
        self._wlogcycles_timer = QTimer(self)
        self._wlogcycles_timer.setSingleShot(True)
        self._wlogcycles_timer.setInterval(500)
        QObject.connect(self._wlogcycles_timer, SIGNAL("timeout()"), self._setIntensityLogCycles)
        lo1.addWidget(self._wlogcycles, 1, 1)
        self._wlogcycles.setRange(1., 10)
        self._wlogcycles.setStep(0.1)
        self._wlogcycles.setTracking(False)
        QObject.connect(self._wlogcycles, SIGNAL("valueChanged(double)"), self._setIntensityLogCycles)
        QObject.connect(self._wlogcycles, SIGNAL("sliderMoved(double)"), self._previewIntensityLogCycles)

# 需要导入模块: from PyQt4.Qt import QToolButton [as 别名]
# 或者: from PyQt4.Qt.QToolButton import setMenu [as 别名]
class ImageController(QFrame):
    """An ImageController is a widget for controlling the display of one image.
    It can emit the following signals from the image:
    raise                     raise button was clicked
    center                  center-on-image option was selected
    unload                  unload option was selected
    slice                     image slice has changed, need to redraw (emitted by SkyImage automatically)
    repaint                 image display range or colormap has changed, need to redraw (emitted by SkyImage automatically)
    """

    def __init__(self, image, parent, imgman, name=None, save=False):
        QFrame.__init__(self, parent)
        self.setFrameStyle(QFrame.StyledPanel | QFrame.Raised)
        # init state
        self.image = image
        self._imgman = imgman
        self._currier = PersistentCurrier()
        self._control_dialog = None
        # create widgets
        self._lo = lo = QHBoxLayout(self)
        lo.setContentsMargins(0, 0, 0, 0)
        lo.setSpacing(2)
        # raise button
        self._wraise = QToolButton(self)
        lo.addWidget(self._wraise)
        self._wraise.setIcon(pixmaps.raise_up.icon())
        self._wraise.setAutoRaise(True)
        self._can_raise = False
        QObject.connect(self._wraise, SIGNAL("clicked()"), self._raiseButtonPressed)
        self._wraise.setToolTip("""<P>Click here to raise this image above other images. Hold the button down briefly to
      show a menu of image operations.</P>""")
        # center label
        self._wcenter = QLabel(self)
        self._wcenter.setPixmap(pixmaps.center_image.pm())
        self._wcenter.setToolTip(
            "<P>The plot is currently centered on (the reference pixel %d,%d) of this image.</P>" % self.image.referencePixel())
        lo.addWidget(self._wcenter)
        # name/filename label
        self.name = image.name
        self._wlabel = QLabel(self.name, self)
        self._number = 0
        self.setName(self.name)
        self._wlabel.setToolTip("%s %s" % (image.filename, "\u00D7".join(map(str, image.data().shape))))
        lo.addWidget(self._wlabel, 1)
        # if 'save' is specified, create a "save" button
        if save:
            self._wsave = QToolButton(self)
            lo.addWidget(self._wsave)
            self._wsave.setText("save")
            self._wsave.setAutoRaise(True)
            self._save_dir = save if isinstance(save, str) else "."
            QObject.connect(self._wsave, SIGNAL("clicked()"), self._saveImage)
            self._wsave.setToolTip("""<P>Click here to write this image to a FITS file.</P>""")
        # render control
        dprint(2, "creating RenderControl")
        self._rc = RenderControl(image, self)
        dprint(2, "done")
        # selectors for extra axes
        self._wslicers = []
        curslice = self._rc.currentSlice();  # this may be loaded from config, so not necessarily 0
        for iextra, axisname, labels in self._rc.slicedAxes():
            if axisname.upper() not in ["STOKES", "COMPLEX"]:
                lbl = QLabel("%s:" % axisname, self)
                lo.addWidget(lbl)
            else:
                lbl = None
            slicer = QComboBox(self)
            self._wslicers.append(slicer)
            lo.addWidget(slicer)
            slicer.addItems(labels)
            slicer.setToolTip("""<P>Selects current slice along the %s axis.</P>""" % axisname)
            slicer.setCurrentIndex(curslice[iextra])
            QObject.connect(slicer, SIGNAL("activated(int)"), self._currier.curry(self._rc.changeSlice, iextra))
        # min/max display ranges
        lo.addSpacing(5)
        self._wrangelbl = QLabel(self)
        lo.addWidget(self._wrangelbl)
        self._minmaxvalidator = FloatValidator(self)
        self._wmin = QLineEdit(self)
        self._wmax = QLineEdit(self)
        width = self._wmin.fontMetrics().width("1.234567e-05")
        for w in self._wmin, self._wmax:
            lo.addWidget(w, 0)
            w.setValidator(self._minmaxvalidator)
            w.setMaximumWidth(width)
            w.setMinimumWidth(width)
            QObject.connect(w, SIGNAL("editingFinished()"), self._changeDisplayRange)
        # full-range button
        self._wfullrange = QToolButton(self)
        lo.addWidget(self._wfullrange, 0)
        self._wfullrange.setIcon(pixmaps.zoom_range.icon())
        self._wfullrange.setAutoRaise(True)
        QObject.connect(self._wfullrange, SIGNAL("clicked()"), self.renderControl().resetSubsetDisplayRange)
        rangemenu = QMenu(self)
        rangemenu.addAction(pixmaps.full_range.icon(), "Full subset", self.renderControl().resetSubsetDisplayRange)
        for percent in (99.99, 99.9, 99.5, 99, 98, 95):
            rangemenu.addAction("%g%%" % percent, self._currier.curry(self._changeDisplayRangeToPercent, percent))
        self._wfullrange.setPopupMode(QToolButton.DelayedPopup)
        self._wfullrange.setMenu(rangemenu)
        # update widgets from current display range
#.........这里部分代码省略.........