Python QTableView.setMaximumHeight方法代码示例

# 需要导入模块: from PyQt4.Qt import QTableView [as 别名]
# 或者: from PyQt4.Qt.QTableView import setMaximumHeight [as 别名]

#.........这里部分代码省略.........
      def addOrdering():
         if len(self.segDefList) > 0:
            dlgSpecifyOrdering = DlgSpecifyOrdering(main, main, len(self.segDefList))     
            if dlgSpecifyOrdering.exec_():
               self.segOrdStrSet.add(str(dlgSpecifyOrdering.parseOrderingList()).strip('[]'))
               self.updateOrderingListBox()
         else:
            QMessageBox.warning(self.main, tr('Not Ready'), tr("""
               No segments have been entered. You must enter some segments before you can order them."""), QMessageBox.Ok)

      
      self.main = main
      self.segDefList = []
      self.segOrdStrSet = set()
      segmentHeader = QRichLabel(tr("""<b>Build segments for pass phrase search: </b>"""), doWrap=False)
      self.knownButton = QPushButton("Add Known Segment")
      self.unknownCaseButton = QPushButton("Add Unknown Case Segment")
      self.unknownOrderButton = QPushButton("Add Unknown Order Segment")
      self.main.connect(self.knownButton, SIGNAL('clicked()'), addKnownSegment)
      self.main.connect(self.unknownCaseButton, SIGNAL('clicked()'), addUnknownCaseSegment)
      self.main.connect(self.unknownOrderButton, SIGNAL('clicked()'), addUnknownOrderSegment)
      topRow =  makeHorizFrame([segmentHeader, self.knownButton, self.unknownCaseButton, self.unknownOrderButton, 'stretch'])
      
      self.segDefTableModel = SegDefDisplayModel()
      self.segDefTableView = QTableView()
      self.segDefTableView.setModel(self.segDefTableModel)
      self.segDefTableView.setSelectionBehavior(QTableView.SelectRows)
      self.segDefTableView.setSelectionMode(QTableView.SingleSelection)
      self.segDefTableView.verticalHeader().setDefaultSectionSize(20)
      self.segDefTableView.verticalHeader().hide()
      
      h = tightSizeNChar(self.segDefTableView, 1)[1]
      self.segDefTableView.setMinimumHeight(2 * (1.3 * h))
      self.segDefTableView.setMaximumHeight(10 * (1.3 * h))      
      initialColResize(self.segDefTableView, [.1, .2, .4, .1, .1, .1])

      self.segDefTableView.customContextMenuRequested.connect(self.showSegContextMenu)
      self.segDefTableView.setContextMenuPolicy(Qt.CustomContextMenu)
      
      segmentOrderingsHeader = QRichLabel(tr("""<b>Specify orderings for pass phrase search: </b>"""), doWrap=False)
      self.addOrderingButton = QPushButton("Add Ordering")
      
      
      self.main.connect(self.addOrderingButton, SIGNAL('clicked()'), addOrdering)
      orderingButtonPanel = makeHorizFrame([segmentOrderingsHeader, self.addOrderingButton, 'stretch'])

      self.segOrdListBox  = QListWidget()
      
      self.segOrdListBox.customContextMenuRequested.connect(self.showOrdContextMenu)
      self.segOrdListBox.setContextMenuPolicy(Qt.CustomContextMenu)
      
      
      self.searchButton = QPushButton("Search")
      self.main.connect(self.searchButton, SIGNAL('clicked()'), searchForPassphrase)
      self.stopButton = QPushButton("Stop Searching")
      self.stopButton.setEnabled(False)
      self.main.connect(self.stopButton, SIGNAL('clicked()'), endSearch)
      totalSearchLabel = QRichLabel(tr("""<b>Total Passphrase Tries To Search: </b>"""), doWrap=False)
      self.totalSearchTriesDisplay = QLineEdit()
      self.totalSearchTriesDisplay.setReadOnly(True)
      self.totalSearchTriesDisplay.setText(QString('0'))
      self.totalSearchTriesDisplay.setFont(GETFONT('Fixed'))
      self.totalSearchTriesDisplay.setMinimumWidth(tightSizeNChar(self.totalSearchTriesDisplay, 6)[0])
      self.totalSearchTriesDisplay.setMaximumWidth(tightSizeNChar(self.totalSearchTriesDisplay, 12)[0])
      searchButtonPanel = makeHorizFrame([self.searchButton, self.stopButton, 'stretch', totalSearchLabel,  self.totalSearchTriesDisplay])
      

# 需要导入模块: from PyQt4.Qt import QTableView [as 别名]
# 或者: from PyQt4.Qt.QTableView import setMaximumHeight [as 别名]

#.........这里部分代码省略.........
               privKeyMap[scrAddr] = addrObj.binPrivKey32_Plain.copy()
            signedTx = PyCreateAndSignTx(utxiList,
                  [],
                  privKeyMap, SIGHASH_NONE|SIGHASH_ANYONECANPAY )
            
            print "-------------"
            print binary_to_hex(signedTx.serialize())
            
            # sock = socket.create_connection(('dust-b-gone.bitcoin.petertodd.org',80))
            # sock.send(signedTx.serialize())
            # sock.send(b'\n')
            # sock.close()
                  

         except socket.error as err:
            QMessageBox.critical(self.main, tr('Negative Value'), tr("""
               Failed to connect to dust-b-gone server: %s""" % err.strerror), QMessageBox.Ok)            
         except NegativeValueError:
            QMessageBox.critical(self.main, tr('Negative Value'), tr("""
               You must enter a positive value of at least 0.0000 0001 
               and less than %s for the dust limit.""" % MAX_DUST_LIMIT_STR), QMessageBox.Ok)
         except TooMuchPrecisionError:
            QMessageBox.critical(self.main.main, tr('Too much precision'), tr("""
               Bitcoins can only be specified down to 8 decimal places. 
               The smallest unit of a Groestlcoin is 0.0000 0001 GRS.
               Please enter a dust limit of at least 0.0000 0001 and less than %s.""" % MAX_DUST_LIMIT_STR), QMessageBox.Ok)
         finally:
            for scraddr in privKeyMap:
               privKeyMap[scraddr].destroy()
         
         
         
          
      self.main = main
 
      self.lblHeader    = QRichLabel(tr("""<b>Dust Outputs for Wallet: None Selected</b>"""), doWrap=False)
      self.beGoneDustButton = QPushButton("Remove Dust")
      self.beGoneDustButton.setEnabled(False)
      self.main.connect(self.beGoneDustButton, SIGNAL('clicked()'), sendDust)
      topRow =  makeHorizFrame([self.lblHeader,'stretch'])
      secondRow =  makeHorizFrame([self.beGoneDustButton, 'stretch'])
      
      self.dustLimitLabel = QLabel("Max Dust Value (GRS): ")
      self.dustLimitText = QLineEdit()
      self.dustLimitText.setFont(GETFONT('Fixed'))
      self.dustLimitText.setMinimumWidth(tightSizeNChar(self.dustLimitText, 6)[0])
      self.dustLimitText.setMaximumWidth(tightSizeNChar(self.dustLimitText, 12)[0])
      self.dustLimitText.setAlignment(Qt.AlignRight)
      self.dustLimitText.setText(coin2str(DEFAULT_DUST_LIMIT))
      self.main.connect(self.dustLimitText, SIGNAL('textChanged(QString)'), updateDustLimit)
      
      
      limitPanel = makeHorizFrame([self.dustLimitLabel, self.dustLimitText, 'stretch'])
      
      
      self.dustTableModel = DustDisplayModel()
      self.dustTableView = QTableView()
      self.dustTableView.setModel(self.dustTableModel)
      self.dustTableView.setSelectionMode(QTableView.NoSelection)
      self.dustTableView.verticalHeader().setDefaultSectionSize(20)
      self.dustTableView.verticalHeader().hide()
      h = tightSizeNChar(self.dustTableView, 1)[1]
      self.dustTableView.setMinimumHeight(2 * (1.3 * h))
      self.dustTableView.setMaximumHeight(10 * (1.3 * h))
      initialColResize(self.dustTableView, [100, .7, .3])

      self.dustTableView.setContextMenuPolicy(Qt.CustomContextMenu)

      self.lblTxioInfo = QRichLabel('')
      self.lblTxioInfo.setMinimumWidth(tightSizeNChar(self.lblTxioInfo, 30)[0])
      
      self.main.connect(self.main.walletsView, SIGNAL('clicked(QModelIndex)'), 
                   updateDustLimit)

      self.dustBGoneFrame = makeVertFrame([topRow, secondRow, limitPanel, self.dustTableView, 'stretch'])

      # Now set the scrollarea widget to the layout
      self.tabToDisplay = QScrollArea()
      self.tabToDisplay.setWidgetResizable(True)
      self.tabToDisplay.setWidget(self.dustBGoneFrame)

   def getSelectedWlt(self):
      wlt = None
      selectedWltList = self.main.walletsView.selectedIndexes()
      if len(selectedWltList)>0:
            row = selectedWltList[0].row()
            wltID = str(self.main.walletsView.model().index(row, WLTVIEWCOLS.ID).data().toString())
            wlt = self.main.walletMap[wltID]
      return wlt


   #############################################################################
   def getTabToDisplay(self):
      return self.tabToDisplay
   
   def injectShutdownFunc(self):
      try:
         self.main.writeSetting('DustLedgerCols', saveTableView(self.dustTableView))
      except:
         LOGEXCEPT('Strange error during shutdown')