Python InterfaceKit.getSensorCount方法代码示例

# 需要导入模块: from Phidgets.Devices.InterfaceKit import InterfaceKit [as 别名]
# 或者: from Phidgets.Devices.InterfaceKit.InterfaceKit import getSensorCount [as 别名]
class PhidgetsEventThread(QtCore.QThread):
    def __init__(self, parent=None):
        super(PhidgetsEventThread, self).__init__(parent)

        try:
            self.interfaceKit = InterfaceKit()
            self.interfaceKit.openPhidget()
            self.interfaceKit.setOnAttachHandler(self.interfaceKitAttachedEvent)
            self.interfaceKit.setOnDetachHandler(self.interfaceKitDetachEvent)
            self.interfaceKit.setOnErrorhandler(self.interfaceKitErrorSlot)
            self.interfaceKit.setOnInputChangeHandler(self.interfaceKitInputChangedEvent)
            self.interfaceKit.setOnOutputChangeHandler(self.interfaceKitOutputChangedEvent)
            self.interfaceKit.setOnSensorChangeHandler(self.interfaceKitSensorChangedEvent)
        except RuntimeError as e:
            print "Runtime Exception: %s" % (e.details)
            print "Exiting..."
            sys.exit(1)
            
        except PhidgetException as e:
            print "Phidget Exception %i: %s" % (e.code, e.details)
            print "Exiting..."
            sys.exit(1) 
    
    
    #===========================================================================
    # On Interfacekit events, emit signals to main thread for updating GUI
    #===========================================================================
    def interfaceKitAttachedEvent(self, event):
        self.emit(QtCore.SIGNAL("interfaceKitAttachedSlot"), event)
    
    def interfaceKitDetachEvent(self, event):
        self.emit(QtCore.SIGNAL("interfaceKitDetachedSlot"), event)
        
    def interfaceKitErrorSlot(self, event):
        self.emit(QtCore.SIGNAL("interfaceKitErrorSlot"), event)
    
    def interfaceKitInputChangedEvent(self, event):
        self.emit(QtCore.SIGNAL("interfaceKitInputChangedSlot"), event)
    
    def interfaceKitOutputChangedEvent(self, event):
        self.emit(QtCore.SIGNAL("interfaceKitOutputChangedSlot"), event)
    
    def interfaceKitSensorChangedEvent(self, event):
        self.emit(QtCore.SIGNAL("interfaceKitSensorChangedSlot"), event)
    
    def setSensorSensitivity(self, value):
        try:
            for i in range(self.interfaceKit.getSensorCount()):
                self.interfaceKit.setSensorChangeTrigger(i, value)
        except PhidgetException as e:
            print "Could not set sensitivity: %s" % e.details
            
    def run(self):
        self.exec_()

# 需要导入模块: from Phidgets.Devices.InterfaceKit import InterfaceKit [as 别名]
# 或者: from Phidgets.Devices.InterfaceKit.InterfaceKit import getSensorCount [as 别名]
class Phidgets:
    
    def __init__(self):
        self.V1 = 0.0
        self.V2list = [0,0,0,0,0,0,0] #lista dei valori associati alle porte analogiche, corrispondenza porta analogica posizione nella lista
        self.running = True
        
    def ponteDiWheatstone(self):
        R1 = 1000.0#1KOhm
        R2 = 1000.0#1KOhm
        R3 = 1000.0#1KOhm
        Vs = 5.0
        
        for pos, v in enumerate(self.V2list):
            if v==0:
                continue
            
            Vm = v-self.V1 #ingresso differenziale
            print Vm
            #formula per il calcolo della resistenza
            p1 = R3/(R1+R3) + (Vm/Vs)
            p2 = 1 - p1
            Rx = R2*(p1/p2);
            
            #
            date = datetime.now().strftime('%Y-%m-%d')
            time = datetime.now().strftime('%H:%M:%S')
            self.monitoring.insertValue(Rx, pos+1, date,time)
            #
            print ("la resistenza sull'input %d vale %f: " % (pos+1, Rx))

    def partitoreDiTensione(self, val):
        if val != 1:
            r1 = 1000
            Vref = 12 #5V tensione applicata al partitore
            V2 = (5.0/1023.0)*val #tensione letta ai capi della resistenza
            r2 =  r1*V2/(Vref-V2)
            print ("la resistenza vale %f: " % r2)
        
    def interfaceKitSensorChanged(self, e):
        source = e.device
        if e.value == 1:#1 indica che non sta nulla collegato e resetto anche il suo valore nella lista
            if e.index==0:
                self.V1=0
            else:
                self.V2list[e.index-1]=0
            return
        
        if e.index == 0:#V1 va collegato sempre sul pin 0
            self.V1 = (5.0/1023.0)*e.value 
            print self.V1
        else:
            val = (5.0/1023.0)*e.value
            self.V2list[e.index-1]=val #corrispondenza porta analogica posizione nella lista
            print str(self.V2list)
        
        self.ponteDiWheatstone()
            
        #if e.value != 1:
        #    self.monitoring.insertPos(e.index)
        #print("InterfaceKit %i: Sensor %i: %i" % (source.getSerialNum(), e.index, e.value))
    
    def run(self):
            try:
                self.interfaceKit = InterfaceKit() #instanzio la classe per interfacciarmi con la scheda di acquisizione
                self.monitoring = sm.SensorMonitoring() #tabella dove sono memorizzati i valori dei sensori collegati
                self.monitoring.open()
                self.monitoring.create()
            except RuntimeError as e:
                print("Runtime Exception: %s" % e.details)
                print("Exiting....")
                exit(1)
            
            try:
                self.interfaceKit.setOnSensorChangeHandler(self.interfaceKitSensorChanged)
            except PhidgetException as e:
                print("Exiting....")
                exit(1)
                
            try:
                self.interfaceKit.openPhidget()
            except PhidgetException as e:
                print("Exiting....")
                exit(1)
                
            try:
                self.interfaceKit.waitForAttach(10000)
            except PhidgetException as e:
                try:
                    self.interfaceKit.closePhidget()
                except PhidgetException as e:
                    exit(1)
                print("Assicurarsi di aver collegato la scheda di acquisizione Phidget 1019 al PC. Exiting....")
                exit(1)
            else:
                print "Scheda di acquisizione rilevata."
                
            for i in range(self.interfaceKit.getSensorCount()):
                try:
                    self.interfaceKit.setDataRate(i, 4)
#.........这里部分代码省略.........

# 需要导入模块: from Phidgets.Devices.InterfaceKit import InterfaceKit [as 别名]
# 或者: from Phidgets.Devices.InterfaceKit.InterfaceKit import getSensorCount [as 别名]
except PhidgetException as e:
    print("Phidget Exception %i: %s" % (e.code, e.details))
    try:
        interfaceKit.closePhidget()
    except PhidgetException as e:
        print("Phidget Exception %i: %s" % (e.code, e.details))
        print("Exiting....")
        exit(1)
    print("Exiting....")
    exit(1)
else:
    displayDeviceInfo()


print("Setting the data rate for each sensor index to 4ms....")
for i in range(interfaceKit.getSensorCount()):
    try:        
        interfaceKit.setDataRate(i, 4)
    except PhidgetException as e:
        print("Phidget Exception %i: %s" % (e.code, e.details))
        

HOST = ''                                             
PORT = 20000       
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
s.bind((HOST, PORT))                            
s.listen(1)


print("Press Enter to quit....")

# 需要导入模块: from Phidgets.Devices.InterfaceKit import InterfaceKit [as 别名]
# 或者: from Phidgets.Devices.InterfaceKit.InterfaceKit import getSensorCount [as 别名]
def setup_phidgets():
    global interfaceKits
    interfaceKits = InterfaceKits()

    "Print Creating phidget manager"
    try:
        manager = Manager()
    except RuntimeError as e:
        output("Runtime Exception: %s" % e.details)
        output("Exiting....")
        exit(1)

    try:
        manager.setOnAttachHandler(ManagerDeviceAttached)
        manager.setOnDetachHandler(ManagerDeviceDetached)
        manager.setOnErrorHandler(ManagerError)
    except PhidgetException as e:
        output("Phidget Exception %i: %s" % (e.code, e.details))
        output("Exiting....")
        exit(1)

    output("Opening phidget manager....")
    logging.info("Opening phidget manager....")

    try:
        manager.openManager()
        #manager.openRemote("hydropi","hydropi")
    except PhidgetException as e:
        output("Phidget Exception %i: %s" % (e.code, e.details))
        logging.error("Phidget Exception %i: %s" % (e.code, e.details))
        output("Exiting....")
        logging.error("Exiting....")
        exit(1)

    # Wait a moment for devices to attache......
    output("\nWaiting one sec for devices to attach....\n\n")
    logging.info("Waiting one sec for devices to attach....")
    time.sleep(1)

    output("Phidget manager opened.")

    attachedDevices = manager.getAttachedDevices()
    for attachedDevice in attachedDevices:
     
        output("Found %30s - SN %10d" % (attachedDevice.getDeviceName(), attachedDevice.getSerialNum()))
        if attachedDevice.getDeviceClass() == PhidgetClass.INTERFACEKIT:
            output("  %s/%d is an InterfaceKit" % ( attachedDevice.getDeviceName(),attachedDevice.getSerialNum()))
            #Create an interfacekit object
            try:
                newInterfaceKit = InterfaceKit()
            except RuntimeError as e:
                output("Runtime Exception: %s" % e.details)
                output("Exiting....")
                exit(1)

            output("  Opening...")
            try:
                newInterfaceKit.openPhidget()
            except PhidgetException as e:
                output("Phidget Exception %i: %s" % (e.code, e.details))
                output("Exiting....")

            output("  Setting handlers...")
            try:
                newInterfaceKit.setOnAttachHandler(interfaceKitAttached)
                newInterfaceKit.setOnDetachHandler(interfaceKitDetached)
                newInterfaceKit.setOnErrorhandler(interfaceKitError)
            except PhidgetException as e:
                output("Phidget Exception %i: %s" % (e.code, e.details))
                output("Exiting....")
                exit(1)

            output("  Attaching...")
            try:
                newInterfaceKit.waitForAttach(5000)
            except PhidgetException as e:
                output("Phidget Exception %i: %s" % (e.code, e.details))
                try:
                    newInterfaceKit.closePhidget()
                except PhidgetException as e:
                    output("Phidget Exception %i: %s" % (e.code, e.details))
                    output("Exiting....")
                    exit(1)
                output("Exiting....")
                exit(1)

            output("  Setting the data rate for each sensor index to 1000ms....")
            for i in range(newInterfaceKit.getSensorCount()):
                try:
                    newInterfaceKit.setDataRate(i, 1000)
                except PhidgetException as e:
                    output("Phidget Exception %i: %s" % (e.code, e.details))

            interfaceKits.kitList.append(newInterfaceKit)
            
        
    display_device_info(manager)
    return manager 

# 需要导入模块: from Phidgets.Devices.InterfaceKit import InterfaceKit [as 别名]
# 或者: from Phidgets.Devices.InterfaceKit.InterfaceKit import getSensorCount [as 别名]
class PhidgetSensorHandler(AbstractSensorHandler):

    def __init__(self):
        self.device = None
        self._attach_timeout = None
        self._data_rate = None
        self._sensors = None

    def _try_init(self):
        if all([self._data_rate, self._attach_timeout, self._sensors]):
            try:
                from Phidgets.Devices.InterfaceKit import InterfaceKit
                from Phidgets.PhidgetException import PhidgetException
                self.interface_kit = InterfaceKit()
                self.interface_kit.setOnAttachHandler(lambda e: self._attach(e))
                self.interface_kit.setOnDetachHandler(lambda e: self._detach(e))
                self.interface_kit.setOnErrorhandler(lambda e: self._error(e))
                self.interface_kit.setOnSensorChangeHandler(lambda e: self._sensor_change(e))
                self.interface_kit.openPhidget()
                self.interface_kit.waitForAttach(self._attach_timeout)
                for i in range(self.interface_kit.getSensorCount()):
                    self.interface_kit.setDataRate(i, self._data_rate)
                logging.info("Phidget Sensor Handler Initalized")
                for s in self._sensors:
                    if s.port_num is not None:
                        s.current_data = self.interface_kit.getSensorValue(s.port_num)
                        logging.debug("Setting Initial Value for Sensor {} to {}".format(s.port_num, s.current_data))
                    else:
                        logging.warn("Cannot set Initial Value for Sensor {}".format(s.port_num))
            except ImportError:
                self.interface_kit = None
                logging.error('Phidget Python Module not found. Did you install python-phidget?')
            except PhidgetException as e:
                self.interface_kit = None
                logging.error("Could not Initalize Phidget Kit: {}".format(e.details))

    def _read_sensors(self):
        ready_sensors = []
        for s in self._sensors:
            if s.data is not None:
                ready_sensors.append(s)
        return ready_sensors

    def _set_sensors(self, v):
        logging.debug('Adding Phidget Sensors :: {}'.format(v))
        self._sensors = v
        self._try_init()

    sensors = property(_read_sensors, _set_sensors)

    attach_timeout = property(lambda self: self._attach_timeout,
                              lambda self, v: self._set_config('attach_timeout', v))

    data_rate = property(lambda self: self._data_rate,
                         lambda self, v: self._set_config('data_rate', v))

    def _set_config(self, prop, value):
        if prop == 'data_rate':
            self._data_rate = value
        elif prop == 'attach_timeout':
            self._attach_timeout = value
        self._try_init()

    def _attach(self, e):
        self.device = e.device
        logging.info("Phidget InterfaceKit {} Attached".format(self.device.getSerialNum()))

    def _detach(self, e):
        logging.warn("Phidget InterfaceKit {} Removed".format(e.device.getSerialNum()))
        self.device = None

    def _error(self, e):
        logging.error("Phidget Error {} :: {}".format(e.eCode, e.description))

    def _sensor_change(self, e):
        # logging.debug("Phidget Analog Sensor Change :: Port: {} / Data: {}".format(e.index, e.value))
        for s in self._sensors:
            if s.port_type == 'analog' and s.port_num == e.index:

                # Set a default ID if none given in config file
                if s.id is None:
                    # Default ID is kit serial number::port
                    s.id = '{}:{}:{}'.format(self.device.getSerialNum(),
                                             s.port_type, s.port_num)

                s.current_data = e.value

# 需要导入模块: from Phidgets.Devices.InterfaceKit import InterfaceKit [as 别名]
# 或者: from Phidgets.Devices.InterfaceKit.InterfaceKit import getSensorCount [as 别名]

#.........这里部分代码省略.........
            cls=self.__class__.__name__
        )

    def __conform__(self, protocol):
        return json.dumps(self.json(), cls=ComplexEncoder)

    def displayDeviceInfo(self):pass
        
    #Event Handler Callback Functions
    def inferfaceKitAttached(self, e):
        attached = e.device
        self.logger.info("InterfaceKit %i Attached!" % (attached.getSerialNum()))

    def interfaceKitDetached(self, e):
        detached = e.device
        self.logger.info("InterfaceKit %i Detached!" % (detached.getSerialNum()))

    def interfaceKitError(self, e):
        try:
            if e.eCode not in (36866,):
                source = e.device
                self.logger.info("InterfaceKit %i: Phidget Error %i: %s" % (source.getSerialNum(), e.eCode, e.description))
        except PhidgetException as e:
            self.logger.exception(e)

    def interfaceKitInputChanged(self, e):
        input = self.get_input(e.index)
        if not input: return
        val = input.do_conversion(e.value)
        ob = input.json()
        self.publish(ob)
        self.logger.info("%s Input: %s" % (input.display, val))

    def interfaceKitSensorChanged(self, e):
        sensor = self.get_sensor(e.index)
        if not sensor: return
        val = sensor.do_conversion(float(e.value)) if sensor else 0
        ob = sensor.json()
        self.publish(ob)
        self.logger.info("%s Sensor: %s" % (sensor.display, val))

    def interfaceKitOutputChanged(self, e):
        output = self.get_output(e.index)
        if not output: return
        output.current_state = e.state
        ob = output.json()
        self.publish(ob)
        self.logger.info("%s Output: %s" % (output.display, output.current_state))


    def run(self):
        if LIVE: self.init_kit()
        while True: gevent.sleep(.1)

    def init_kit(self):
        try:
            self.interface_kit.setOnAttachHandler(self.inferfaceKitAttached)
            self.interface_kit.setOnDetachHandler(self.interfaceKitDetached)
            self.interface_kit.setOnErrorhandler(self.interfaceKitError)
            self.interface_kit.setOnInputChangeHandler(self.interfaceKitInputChanged)
            self.interface_kit.setOnOutputChangeHandler(self.interfaceKitOutputChanged)
            self.interface_kit.setOnSensorChangeHandler(self.interfaceKitSensorChanged)
        except PhidgetException as e:
            self.logger.exception(e)
            
        self.logger.info("Opening phidget object....")

        try:
            self.interface_kit.openPhidget()
        except PhidgetException as e:
            self.logger.exception(e)
            
        self.logger.info("Waiting for attach....")

        try:
            self.interface_kit.waitForAttach(10000)
        except PhidgetException as e:
            self.logger.exception(e)
            try:
                self.interface_kit.closePhidget()
            except PhidgetException as e:
                self.logger.exception(e)
                self.logger.info("Exiting....")
                exit(1)
            self.logger.info("Exiting....")
        else:
            self.displayDeviceInfo()

        self.logger.info("Initializing Sensors")
        for i in range(self.interface_kit.getSensorCount()):
            try:
                sensor = self.get_sensor(i)
                if sensor:
                    self.logger.info("Setting Up: %s" % sensor.display)
                    self.logger.info("Change: %s" % sensor.change)
                    self.logger.info("Data Rate: %s" % sensor.data_rate)
                    self.interface_kit.setSensorChangeTrigger(i, sensor.change)
                    self.interface_kit.setDataRate(i, sensor.data_rate)
            except PhidgetException as e:
                self.logger.exception(e)

# 需要导入模块: from Phidgets.Devices.InterfaceKit import InterfaceKit [as 别名]
# 或者: from Phidgets.Devices.InterfaceKit.InterfaceKit import getSensorCount [as 别名]

#.........这里部分代码省略.........
            self.interfaceKit.setOnAttachHandler(self.inferfaceKitAttached)
            self.interfaceKit.setOnDetachHandler(self.interfaceKitDetached)
            self.interfaceKit.setOnErrorhandler(self.interfaceKitError)
            self.interfaceKit.setOnInputChangeHandler(self.interfaceKitInputChanged)
            self.interfaceKit.setOnOutputChangeHandler(self.interfaceKitOutputChanged)
            self.interfaceKit.setOnSensorChangeHandler(self.interfaceKitSensorChanged)
        except PhidgetException as e:
            print("Phidget Exception %i: %s" % (e.code, e.details))
            print("Exiting....")
            exit(1)
        
        print("Opening phidget object....")
        
        try:
            self.interfaceKit.openPhidget()
        except PhidgetException as e:
            print("Phidget Exception %i: %s" % (e.code, e.details))
            print("Exiting....")
            exit(1)
        
        print("Waiting for attach....")
        
        try:
            self.interfaceKit.waitForAttach(10000)
        except PhidgetException as e:
            print("Phidget Exception %i: %s" % (e.code, e.details))
            self.closePhidgets()
        else:
            self.displayDeviceInfo()
        
        
        #get sensor count
        try:
            self.ChannelCount = self.interfaceKit.getSensorCount()
        except PhidgetException as e:
            print("Phidget Exception %i: %s" % (e.code, e.details))
            self.closePhidgets()
            sitwPara.KeyCount = 0 #no sensor has been detected
            self.prtMsg('   ****** No sensor has been detected !!!\n')
        
        
        print("Setting the data rate for each sensor index to 4ms....")
        for i in range(sitwPara.KeyCount):
            try:
                self.interfaceKit.setDataRate(i, 4)
            except PhidgetException as e:
                print("Phidget Exception %i: %s" % (e.code, e.details))
        
        
        ### depends on the low light performance of the sensor
        print("Setting the sensitivity for each sensor index to ???....")
        for i in range(sitwPara.KeyCount):
            try:
                self.interfaceKit.setSensorChangeTrigger(i, 2)              #~~~~*YL*~~~~
            except PhidgetException as e:
                print("Phidget Exception %i: %s" % (e.code, e.details))
        
        

    def closePhidgets(self):
        #print("Press Enter to quit....")
        #chr = sys.stdin.read(1)
        #print("Closing...")
        
        try:
            self.interfaceKit.closePhidget()

# 需要导入模块: from Phidgets.Devices.InterfaceKit import InterfaceKit [as 别名]
# 或者: from Phidgets.Devices.InterfaceKit.InterfaceKit import getSensorCount [as 别名]
def main():
    
    
    
    try:
        interfaceKit = InterfaceKit()
    except RuntimeError as e:
        print("Runtime Exception: %s" % e.details)
        print("Exiting....")
        exit(1)

    try:
        interfaceKit.setOnAttachHandler(inferfaceKitAttached)
        interfaceKit.setOnDetachHandler(interfaceKitDetached)
        interfaceKit.setOnErrorhandler(interfaceKitError)
        interfaceKit.setOnInputChangeHandler(interfaceKitInputChanged)
        interfaceKit.setOnOutputChangeHandler(interfaceKitOutputChanged)
        interfaceKit.setOnSensorChangeHandler(interfaceKitSensorChanged)
    except PhidgetException as e:
        print("Phidget Exception %i: %s" % (e.code, e.details))
        print("Exiting....")
        exit(1)

    print("Opening phidget object....")

    try:
        interfaceKit.openPhidget()
    except PhidgetException as e:
        print("Phidget Exception %i: %s" % (e.code, e.details))
        print("Exiting....")
        exit(1)

    print("Waiting for attach....")

    try:
        interfaceKit.waitForAttach(10000)
    except PhidgetException as e:
        print("Phidget Exception %i: %s" % (e.code, e.details))
        try:
            interfaceKit.closePhidget()
        except PhidgetException as e:
            print("Phidget Exception %i: %s" % (e.code, e.details))
            print("Exiting....")
            exit(1)
        print("Exiting....")
        exit(1)

    print("Setting the data rate for each sensor index to 4ms....")
    for i in range(interfaceKit.getSensorCount()):
        try:
            interfaceKit.setDataRate(i, 4)
        except PhidgetException as e:
            print("Phidget Exception %i: %s" % (e.code, e.details))

    sys.exit(app.exec_())
    try:
        interfaceKit.closePhidget()
    except PhidgetException as e:
        print("Phidget Exception %i: %s" % (e.code, e.details))
        print("Exiting....")
        exit(1)