Python Utils.canonstr方法代码示例

# 需要导入模块: from Mailman import Utils [as 别名]
# 或者: from Mailman.Utils import canonstr [as 别名]
 def getMemberName(self, member):
     name = self.select_on('name', member)
     if len(name):
       try:
         return Utils.canonstr(name[0])
       except:
         return name[0]
     self.__assertIsMember(member)

# 需要导入模块: from Mailman import Utils [as 别名]
# 或者: from Mailman.Utils import canonstr [as 别名]
    def _setValue(self, mlist, property, val, doc):
        if property == 'real_name' and \
               val.lower() <> str(mlist.real_name.lower()):
            # These values can't differ by other than case
            doc.addError(_("""<b>real_name</b> attribute not
            changed!  It must differ from the list's name by case
            only."""))
        elif property == 'new_member_options':
            # Get current value because there are valid bits not in OPTIONS.
            # If we're the admin CGI, we then process the bits in OPTIONS,
            # turning them on or off as appropriate.  Otherwise we process all
            # the bits in mm_cfg.OPTINFO so that config_list can set and reset
            # them.
            newopts = mlist.new_member_options
            if isinstance(doc, Document):
                opts = OPTIONS
            else:
                opts = mm_cfg.OPTINFO
            for opt in opts:
                bitfield = mm_cfg.OPTINFO[opt]
                if opt in val:
                    newopts |= bitfield
                else:
                    newopts &= ~bitfield
            mlist.new_member_options = newopts
        elif property == 'subject_prefix':
            # Convert any html entities to Unicode
            mlist.subject_prefix = Utils.canonstr(
                val, mlist.preferred_language)
        elif property == 'info':
            if val <> mlist.info:
                if 0 and Utils.suspiciousHTML(val):
                    doc.addError(_("""The <b>info</b> attribute you saved
contains suspicious HTML that could potentially expose your users to cross-site
scripting attacks.  This change has therefore been rejected.  If you still want
to make these changes, you must have shell access to your Mailman server.
This change can be made with bin/withlist or with bin/config_list by setting
mlist.info.
                        """))
                else:
                    mlist.info = val
        elif property == 'admin_member_chunksize' and (val < 1
                                          or not isinstance(val, IntType)):
            doc.addError(_("""<b>admin_member_chunksize</b> attribute not
            changed!  It must be an integer > 0."""))
        else:
            GUIBase._setValue(self, mlist, property, val, doc)

# 需要导入模块: from Mailman import Utils [as 别名]
# 或者: from Mailman.Utils import canonstr [as 别名]
def process_form(mlist, doc, cgidata, lang):
    listowner = mlist.GetOwnerEmail()
    realname = mlist.real_name
    results = []

    # The email address being subscribed, required
    email = cgidata.getvalue('email', '').strip()
    if not email:
        results.append(_('You must supply a valid email address.'))

    fullname = cgidata.getvalue('fullname', '')
    # Canonicalize the full name
    fullname = Utils.canonstr(fullname, lang)
    # Who was doing the subscribing?
    remote = os.environ.get('HTTP_FORWARDED_FOR',
             os.environ.get('HTTP_X_FORWARDED_FOR',
             os.environ.get('REMOTE_ADDR',
                            'unidentified origin')))
    # Are we checking the hidden data?
    if mm_cfg.SUBSCRIBE_FORM_SECRET:
        now = int(time.time())
        # Try to accept a range in case of load balancers, etc.  (LP: #1447445)
        if remote.find('.') >= 0:
            # ipv4 - drop last octet
            remote1 = remote.rsplit('.', 1)[0]
        else:
            # ipv6 - drop last 16 (could end with :: in which case we just
            #        drop one : resulting in an invalid format, but it's only
            #        for our hash so it doesn't matter.
            remote1 = remote.rsplit(':', 1)[0]
        try:
            ftime, fhash = cgidata.getvalue('sub_form_token', '').split(':')
            then = int(ftime)
        except ValueError:
            ftime = fhash = ''
            then = 0
        token = Utils.sha_new(mm_cfg.SUBSCRIBE_FORM_SECRET +
                              ftime +
                              mlist.internal_name() +
                              remote1).hexdigest()
        if ftime and now - then > mm_cfg.FORM_LIFETIME:
            results.append(_('The form is too old.  Please GET it again.'))
        if ftime and now - then < mm_cfg.SUBSCRIBE_FORM_MIN_TIME:
            results.append(
    _('Please take a few seconds to fill out the form before submitting it.'))
        if ftime and token != fhash:
            results.append(
                _("The hidden token didn't match.  Did your IP change?"))
        if not ftime:
            results.append(
    _('There was no hidden token in your submission or it was corrupted.'))
            results.append(_('You must GET the form before submitting it.'))
    # Was an attempt made to subscribe the list to itself?
    if email == mlist.GetListEmail():
        syslog('mischief', 'Attempt to self subscribe %s: %s', email, remote)
        results.append(_('You may not subscribe a list to itself!'))
    # If the user did not supply a password, generate one for him
    password = cgidata.getvalue('pw', '').strip()
    confirmed = cgidata.getvalue('pw-conf', '').strip()

    if not password and not confirmed:
        password = Utils.MakeRandomPassword()
    elif not password or not confirmed:
        results.append(_('If you supply a password, you must confirm it.'))
    elif password <> confirmed:
        results.append(_('Your passwords did not match.'))

    # Get the digest option for the subscription.
    digestflag = cgidata.getvalue('digest')
    if digestflag:
        try:
            digest = int(digestflag)
        except (TypeError, ValueError):
            digest = 0
    else:
        digest = mlist.digest_is_default

    # Sanity check based on list configuration.  BAW: It's actually bogus that
    # the page allows you to set the digest flag if you don't really get the
    # choice. :/
    if not mlist.digestable:
        digest = 0
    elif not mlist.nondigestable:
        digest = 1

    if results:
        print_results(mlist, ERRORSEP.join(results), doc, lang)
        return

    # If this list has private rosters, we have to be careful about the
    # message that gets printed, otherwise the subscription process can be
    # used to mine for list members.  It may be inefficient, but it's still
    # possible, and that kind of defeats the purpose of private rosters.
    # We'll use this string for all successful or unsuccessful subscription
    # results.
    if mlist.private_roster == 0:
        # Public rosters
        privacy_results = ''
    else:
        privacy_results = _("""\
#.........这里部分代码省略.........

# 需要导入模块: from Mailman import Utils [as 别名]
# 或者: from Mailman.Utils import canonstr [as 别名]
def process_form(mlist, doc, cgidata, lang):
    listowner = mlist.GetOwnerEmail()
    realname = mlist.real_name
    results = []

    # The email address being subscribed, required
    email = cgidata.getvalue('email', '').strip()
    if not email:
        results.append(_('You must supply a valid email address.'))

    fullname = cgidata.getvalue('fullname', '')
    # Canonicalize the full name
    fullname = Utils.canonstr(fullname, lang)
    # Who was doing the subscribing?
    remote = os.environ.get('REMOTE_HOST',
                            os.environ.get('REMOTE_ADDR',
                                           'unidentified origin'))
    # Was an attempt made to subscribe the list to itself?
    if email == mlist.GetListEmail():
        syslog('mischief', 'Attempt to self subscribe %s: %s', email, remote)
        results.append(_('You may not subscribe a list to itself!'))
    # If the user did not supply a password, generate one for him
    password = cgidata.getvalue('pw', '').strip()
    confirmed = cgidata.getvalue('pw-conf', '').strip()

    if not password and not confirmed:
        password = Utils.MakeRandomPassword()
    elif not password or not confirmed:
        results.append(_('If you supply a password, you must confirm it.'))
    elif password <> confirmed:
        results.append(_('Your passwords did not match.'))

    # Get the digest option for the subscription.
    digestflag = cgidata.getvalue('digest')
    if digestflag:
        try:
            digest = int(digestflag)
        except ValueError:
            digest = 0
    else:
        digest = mlist.digest_is_default

    # Sanity check based on list configuration.  BAW: It's actually bogus that
    # the page allows you to set the digest flag if you don't really get the
    # choice. :/
    if not mlist.digestable:
        digest = 0
    elif not mlist.nondigestable:
        digest = 1

    if results:
        print_results(mlist, ERRORSEP.join(results), doc, lang)
        return

    # If this list has private rosters, we have to be careful about the
    # message that gets printed, otherwise the subscription process can be
    # used to mine for list members.  It may be inefficient, but it's still
    # possible, and that kind of defeats the purpose of private rosters.
    # We'll use this string for all successful or unsuccessful subscription
    # results.
    if mlist.private_roster == 0:
        # Public rosters
        privacy_results = ''
    else:
        privacy_results = _("""\
Your subscription request has been received, and will soon be acted upon.
Depending on the configuration of this mailing list, your subscription request
may have to be first confirmed by you via email, or approved by the list
moderator.  If confirmation is required, you will soon get a confirmation
email which contains further instructions.""")

    try:
        userdesc = UserDesc(email, fullname, password, digest, lang)
        mlist.AddMember(userdesc, remote)
        results = ''
    # Check for all the errors that mlist.AddMember can throw options on the
    # web page for this cgi
    except Errors.MembershipIsBanned:
        results = _("""The email address you supplied is banned from this
        mailing list.  If you think this restriction is erroneous, please
        contact the list owners at %(listowner)s.""")
    except Errors.MMBadEmailError:
        results = _("""\
The email address you supplied is not valid.  (E.g. it must contain an
`@'.)""")
    except Errors.MMHostileAddress:
        results = _("""\
Your subscription is not allowed because the email address you gave is
insecure.""")
    except Errors.MMSubscribeNeedsConfirmation:
        # Results string depends on whether we have private rosters or not
        if privacy_results:
            results = privacy_results
        else:
            results = _("""\
Confirmation from your email address is required, to prevent anyone from
subscribing you without permission.  Instructions are being sent to you at
%(email)s.  Please note your subscription will not start until you confirm
your subscription.""")
    except Errors.MMNeedApproval, x:
#.........这里部分代码省略.........

# 需要导入模块: from Mailman import Utils [as 别名]
# 或者: from Mailman.Utils import canonstr [as 别名]
            if user in gmlist.getDigestMemberKeys():
                extra += ', ' + _('digest')
            link = HTMLFormatObject(link, 0) + extra
            onlists.append((gmlist.real_name, link))
        onlists.sort()
        items = OrderedList(*[link for name, link in onlists])
        doc.AddItem(items)
        print doc.Format()
        return

    if cgidata.has_key('change-of-address'):
        # We could be changing the user's full name, email address, or both.
        # Watch out for non-ASCII characters in the member's name.
        membername = cgidata.getvalue('fullname')
        # Canonicalize the member's name
        membername = Utils.canonstr(membername, language)
        newaddr = cgidata.getvalue('new-address')
        confirmaddr = cgidata.getvalue('confirm-address')

        oldname = mlist.getMemberName(user)
        set_address = set_membername = 0

        # See if the user wants to change their email address globally.  The
        # list admin is /not/ allowed to make global changes.
        globally = cgidata.getvalue('changeaddr-globally')
        if globally and not is_user_or_siteadmin:
            doc.addError(_("""The list administrator may not change the names
            or addresses for this user's other subscriptions.  However, the
            subscription for this mailing list has been changed."""),
                         _('Note: '))
            globally = False