Python JPSRunTestDriver.run_test方法代码示例

# 需要导入模块: from JPSRunTest import JPSRunTestDriver [as 别名]
# 或者: from JPSRunTest.JPSRunTestDriver import run_test [as 别名]
import sys
utestdir = os.path.abspath(os.path.dirname(os.path.dirname(sys.path[0])))
from sys import *
sys.path.append(utestdir)
from JPSRunTest import JPSRunTestDriver
from utils import *

__author__ = 'Oliver Schmidts'


def runtest3(inifile, trajfile):
    #       x     y1   y2
    #       |     |    |
    #       v     v    v
    door= [8.5, 2.0, 3.0] # value from geometry file. Door is at 9.0 m shifted by 0.5 m
    maxtime = get_maxtime(inifile)
    fps, N, traj = parse_file(trajfile)
    evac_time = (max(traj[:, 1]) - min(traj[:, 1])) / float(fps)
    if evac_time > maxtime*0.5 or not PassedLineX(traj, door):
        logging.info("%s exits with FAILURE. evac_time = %f (maxtime =  %f) or not passed exit" % (argv[0], evac_time, maxtime))
        exit(FAILURE)
    else:
        logging.info("evac_time = %f (maxtime =  %f)" % (evac_time, maxtime))


if __name__ == "__main__":
    test = JPSRunTestDriver(3, argv0=argv[0], testdir=sys.path[0], utestdir=utestdir)
    test.run_test(testfunction=runtest3)
    logging.info("%s exits with SUCCESS" % (argv[0]))
    exit(SUCCESS)

# 需要导入模块: from JPSRunTest import JPSRunTestDriver [as 别名]
# 或者: from JPSRunTest.JPSRunTestDriver import run_test [as 别名]
        logging.critical("%s exists with FAILURE. Flows are almost equal:", argv[0])
        exit(FAILURE)

def run_rimea_test13(inifile, trajfile):
    fps, N, traj = parse_file(trajfile)
    exit_basement = 0
    start_stair = 12
    J_corridor = flow(fps, N, traj, exit_basement)
    J_stair = flow(fps, N, traj, start_stair)
    logging.info("J_corridor = %.2f, J_stair = %.2f (tolerance = %.2f)",
                 J_corridor, J_stair, tolerance)
    return (J_corridor, J_stair)

if __name__ == "__main__":
    test = JPSRunTestDriver(13, argv0=argv[0], testdir=sys.path[0], utestdir=utestdir)
    results = test.run_test(testfunction=run_rimea_test13)
    eval_results(results)
    logging.info("%s exits with SUCCESS" % (argv[0]))
    exit(SUCCESS)

# 需要导入模块: from JPSRunTest import JPSRunTestDriver [as 别名]
# 或者: from JPSRunTest.JPSRunTestDriver import run_test [as 别名]
    fd_exp = results[0]
    fd_sim = results[1]
    dexp = results[0]
    dsim = results[1]
    fig = plt.figure()
    ax = fig.add_subplot(1, 1, 1)
    plt.plot(dsim[:, 1], dsim[:, 2], ".b", alpha=0.5, label="simulation")
    plt.plot(dexp[:, 0], dexp[:, 1], "xr", label="experiment")
    plt.ylabel(r"$v\; [m/s]$", size=ms)
    plt.xlabel(r"$\rho \; [1/m]$", size=ms)
    plt.ylim([0, 1.5])
    plt.xlim([0, 3.0])
    plt.xticks(fontsize=mt)
    plt.yticks(fontsize=mt)
    plt.legend(loc="best", numpoints=1)
    fig.set_tight_layout(True)
    plt.savefig("fd1d.png", dpi=300)

def run_validation_1(inifile, trajfile):
    return 0

if __name__ == "__main__":
    test = JPSRunTestDriver(101, argv0=argv[0],
                            testdir=sys.path[0],
                            utestdir=utestdir)

    results = test.run_test(testfunction=run_validation_1, fd=1)
    eval_results(results)
    logging.info("%s exits with SUCCESS" % (argv[0]))
    exit(SUCCESS)

# 需要导入模块: from JPSRunTest import JPSRunTestDriver [as 别名]
# 或者: from JPSRunTest.JPSRunTestDriver import run_test [as 别名]
sys.path.append(utestdir)
from JPSRunTest import JPSRunTestDriver
from utils import *

def run_rimea_test11(inifile, trajfile):
    files = glob.glob("trajectories/*_exit*")

    for f in files:
        # Read data
        data = np.loadtxt(f)
        
        num_evacuated = data[-1, 1]
        logging.info("%d peds evacuated from exit <%s>", num_evacuated, f.split(".dat")[0].split("_id_")[1])

if __name__ == "__main__":
    test = JPSRunTestDriver(11, argv0=argv[0], testdir=sys.path[0], utestdir=utestdir)
    test.run_test(testfunction=run_rimea_test11)
    logging.info("%s exits with SUCCESS" % (argv[0]))
    exit(SUCCESS)

# 需要导入模块: from JPSRunTest import JPSRunTestDriver [as 别名]
# 或者: from JPSRunTest.JPSRunTestDriver import run_test [as 别名]
    ny = plt.hist(y, bins=10)[0]

    px = scipy.stats.chisquare(nx)[1]
    py = scipy.stats.chisquare(ny)[1]

    return (px, py)
    # PX.append(px)
    # PY.append(py)



if __name__ == "__main__":
    PX = []  #p-value for x
    PY = []  #p-value for y
    test = JPSRunTestDriver(14, argv0=argv[0], testdir=sys.path[0], utestdir=utestdir)
    results = test.run_test(testfunction=runtest14)
    results = np.array(results)
    PX = results[:, 0]
    PY = results[:, 1]
    
    plotit(PX, PY)

    if np.mean(PX) < 0.1 or np.mean(PY)< 0.1:
        logging.info("%s exits with FAILURE PX = %f   PY = %f"%(argv[0], np.mean(PX), np.mean(PY)))
        exit(FAILURE)

    else:
        logging.info("PX = %f  PY = %f"%(np.mean(PX), np.mean(PY)))
        logging.info("%s exits with SUCCESS"%(argv[0]))
    exit(SUCCESS)

# 需要导入模块: from JPSRunTest import JPSRunTestDriver [as 别名]
# 或者: from JPSRunTest.JPSRunTestDriver import run_test [as 别名]
import os
import sys
utestdir = os.path.abspath(os.path.dirname(os.path.dirname(sys.path[0])))
from sys import *
sys.path.append(utestdir)
from JPSRunTest import JPSRunTestDriver
from utils import *

__author__ = 'Oliver Schmidts'

def runtest12(inifile, trajfile):
    maxtime = get_maxtime(inifile)
    fps, N, traj = parse_file(trajfile)
    y2 = traj[traj[:, 0] == 2][:, 3]
    y4 = traj[traj[:, 0] == 4][:, 3]
    dy2 = np.sum(np.abs(np.diff(y2)))
    # evac_time = ( max( traj[:,1] ) - min( traj[:,1] ) ) / float(fps)
    tolerance = 0.005
    if dy2 > tolerance:
        logging.info("%s exits with FAILURE dy2 = %f (tolerance=%f)", argv[0], dy2, tolerance)
        exit(FAILURE)
    else:
        logging.info("dy2 = %f (tolerance=%f)", dy2, tolerance)

if __name__ == "__main__":
    test = JPSRunTestDriver(12, argv0=argv[0], testdir=sys.path[0], utestdir=utestdir)
    test.run_test(testfunction=runtest12)
    logging.info("%s exits with SUCCESS" % (argv[0]))
    exit(SUCCESS)

# 需要导入模块: from JPSRunTest import JPSRunTestDriver [as 别名]
# 或者: from JPSRunTest.JPSRunTestDriver import run_test [as 别名]
    plt.plot(num_threads, evac_times, "o-b", alpha=0.5)

    plt.ylabel(r"Evacuation Time [s]", size=ms)
    plt.xlabel(r"#Threads", size=ms)
    plt.xlim([min(num_threads)-0.5, max(num_threads)+0.5])
    plt.xticks(fontsize=mt)
    plt.xticks(num_threads, fontsize=mt)
    plt.title("mean = %f (+-%f) [s]" % (mean, std))
    plt.grid(alpha=0.7)
    plt.savefig("evactimes.png", dpi=300)

def run_test_9(inifile, trajfile):
    maxtime = get_maxtime(inifile)
    num_threads = get_num_threads(inifile)
    fps, N, traj = parse_file(trajfile)
    if not N:
        logging.critical(" N = %d"%N)
        exit(FAILURE)
    evac_time = (max(traj[:, 1]) - min(traj[:, 1])) / float(fps)
    return (num_threads, evac_time)

if __name__ == "__main__":
    test = JPSRunTestDriver(9, argv0=argv[0],
                            testdir=sys.path[0],
                            utestdir=utestdir)

    results = test.run_test(testfunction=run_test_9)
    eval_results(results)
    logging.info("%s exits with SUCCESS" % (argv[0]))
    exit(SUCCESS)

# 需要导入模块: from JPSRunTest import JPSRunTestDriver [as 别名]
# 或者: from JPSRunTest.JPSRunTestDriver import run_test [as 别名]
    e2 = [18, 1, 2] # x, y1, y2
    logging.info("Checking the exits of pedestrians ...")
    for ped in peds:
        traj1 = traj[ traj[:,0] == ped ]
        x = traj1[:,2]
        y = traj1[:,3]
        if PassedLineX(traj1, e2):
            logging.critical("ped %d exits from Exit (%1.2f, %1.2f) | (%1.2f, %1.2f)"%(ped, e2[0], e2[1], e2[0], e2[2]))
            failure = True

    if failure:
        logging.critical("%s exists with failure!"%argv[0])
        exit(FAILURE)


def PassedLineX(p, exit):
    """
    check if pedestrian (given by matrix p) passed the vertical line x, [y1, y2] y1<y2
    """
    x = exit[0]
    y1 = exit[1]
    y2 = exit[2]
    return any(p[:,2] <= x) & any(p[:,2] >= x) & any(p[:,3] >= y1) & any(p[:,3] <= y2)


if __name__ == "__main__":
    test = JPSRunTestDriver(7.1, argv0=argv[0], testdir=sys.path[0], utestdir=utestdir)
    test.run_test(testfunction=runtest71)
    logging.info("%s exits with SUCCESS" % (argv[0]))
    exit(SUCCESS)

# 需要导入模块: from JPSRunTest import JPSRunTestDriver [as 别名]
# 或者: from JPSRunTest.JPSRunTestDriver import run_test [as 别名]
    exec_time = -1
    evac_time = -2
    logsim = "inifiles/log.P0.dat"
    if not os.path.exists(logsim):
        logging.critical("logsim <%s> does not exist"%logsim)
        exit(FAILURE)
    logging.info("open  <%s> "%logsim)
    f = open(logsim, "r")
    for line in f:
        if line.startswith("Exec"):
            exec_time = float(line.split()[-1])

        if line.startswith("Evac"):
            evac_time = float(line.split()[-1])

    f.close()

    # if evac_time < exec_time:
    #     logging.info("%s exits with FAILURE evac_time = %f, exec_time = %f)"%
    #                  (argv[0], evac_time, exec_time))
    #     exit(FAILURE)
    # else:
    logging.info("evac_time = %f  exec_time = %f)"%(evac_time, exec_time))
        

if __name__ == "__main__":
    test = JPSRunTestDriver(15, argv0=argv[0], testdir=sys.path[0], utestdir=utestdir)
    test.run_test(runtest15)
    logging.info("%s exits with SUCCESS"%(argv[0]))
    exit(SUCCESS)