Python Display.View类代码示例

本文整理汇总了Python中Display.View类的典型用法代码示例。如果您正苦于以下问题：Python View类的具体用法？Python View怎么用？Python View使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了View类的7个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Python代码示例。

示例1: init

    def __init__(self, parent = None):
        """
        Constructor
        """
#        QDialog.__init__(self, parent, Qt.FramelessWindowHint)
        QDialog.__init__(self, parent)
        self.setupUi(self)
        
        self.nerfModel = Model()
        
        pipeInData = gen_sin(F = 1.0, AMP = 100.0,  T = 2.0)
        self.nerfModel.SendPipe(pipeInData)
        
        self.dispView = View(None, VIEWER_REFRESH_RATE, CHIN_PARAM)

        self.dispView.show()
        self.data = []
        self.isLogData = False
        
        # Create float_spin for each input channel
        self.ctrl_all = []
        for (trig_id, name, type, value) in CHOUT_PARAM:
            exec interp('self.ctrl_#{name} = CtrlChannel(hostDialog=self, name=name, id=trig_id, type=type, value=value)')
            exec interp('self.connect(self.ctrl_#{name}.doubleSpinBox, SIGNAL("editingFinished()"), self.onNewWireIn)')
            exec interp('self.connect(self.ctrl_#{name}.doubleSpinBox, SIGNAL("valueChanged(double)"), self.onNewWireIn)')
            exec interp('self.ctrl_all.append(self.ctrl_#{name})')        
        
        # Timer for pulling data, separated from timer_display
        self.timer = QTimer(self)
        self.connect(self.timer, SIGNAL("timeout()"), self.onSyncData)       
        self.timer.start(VIEWER_REFRESH_RATE )
        
        
        self.on_horizontalSlider_valueChanged(5)

开发者ID:wonjsohn，项目名称:sarcos，代码行数:34，代码来源:temp_Controls.py

示例2: init

    def __init__(self, parent = None):
        """
        Constructor
        """
#        QDialog.__init__(self, parent, Qt.FramelessWindowHint)
        QDialog.__init__(self, parent)
        self.setupUi(self)
        
        self.nerfModel = Model()
        self.dispView = View(None, NUM_CHANNEL, DISPLAY_SCALING, VIEWER_REFRESH_RATE, \
                             CHANNEL_COLOR)
                             

        self.dispView.show()
        self.data = []
        self.isLogData = False
        
        self.connect(self.dispView.timer, SIGNAL("timeout()"), self.onCheckMoney)
#        self.connect(self, SIGNAL("initRT"), self.on_horizontalSlider_sliderMoved)
#        self.emit(SIGNAL("initRT"), 1)
        self.on_horizontalSlider_valueChanged(1)
        
#        self.connect(self.doubleSpinBox_0, SIGNAL("editingFinished()"), self.onNewWire00In)
#        self.connect(self.doubleSpinBox_0, SIGNAL("valueChanged(double)"), self.onNewWire00In)
#
#        self.connect(self.doubleSpinBox_1, SIGNAL("editingFinished()"), self.onNewWire01In)
#        self.connect(self.doubleSpinBox_1, SIGNAL("valueChanged(double)"), self.onNewWire01In)

        self.connect(self.doubleSpinBox_2, SIGNAL("editingFinished()"), self.onNewWireIn2)
        self.connect(self.doubleSpinBox_2, SIGNAL("valueChanged(double)"), self.onNewWireIn2)

        self.connect(self.doubleSpinBox_3, SIGNAL("editingFinished()"), self.onNewWireIn3)
        self.connect(self.doubleSpinBox_3, SIGNAL("valueChanged(double)"), self.onNewWireIn3)
#
        self.connect(self.doubleSpinBox_4, SIGNAL("editingFinished()"), self.onNewWireIn4)
        self.connect(self.doubleSpinBox_4, SIGNAL("valueChanged(double)"), self.onNewWireIn4)

        self.connect(self.doubleSpinBox_5, SIGNAL("editingFinished()"), self.onNewWireIn5)
        self.connect(self.doubleSpinBox_5, SIGNAL("valueChanged(double)"), self.onNewWireIn5)

        self.connect(self.doubleSpinBox_6, SIGNAL("editingFinished()"), self.onNewWireIn6)
        self.connect(self.doubleSpinBox_6, SIGNAL("valueChanged(double)"), self.onNewWireIn6)
#
#        self.connect(self.doubleSpinBox_7, SIGNAL("editingFinished()"), self.onNewWire07In)
#        self.connect(self.doubleSpinBox_7, SIGNAL("valueChanged(double)"), self.onNewWire07In)
#        
#        self.connect(self.doubleSpinBox_8, SIGNAL("editingFinished()"), self.onNewWire08In)
#        self.connect(self.doubleSpinBox_8, SIGNAL("valueChanged(double)"), self.onNewWire08In)
#
#        self.connect(self.doubleSpinBox_9, SIGNAL("editingFinished()"), self.onNewWire09In)
#        self.connect(self.doubleSpinBox_9, SIGNAL("valueChanged(double)"), self.onNewWire09In)

        self.connect(self.doubleSpinBox_14, SIGNAL("editingFinished()"), self.onNewWireIn14)
        self.connect(self.doubleSpinBox_14, SIGNAL("valueChanged(double)"), self.onNewWireIn14)
        
        self.connect(self.doubleSpinBox_15, SIGNAL("editingFinished()"), self.onNewWireIn15)
        self.connect(self.doubleSpinBox_15, SIGNAL("valueChanged(double)"), self.onNewWireIn15)

开发者ID:usc-bbdl，项目名称:R01_HSC_NI_system，代码行数:57，代码来源:Controls.py

示例3: init

    def __init__(self, parent = None):
        """
        Constructor
        """
#        QDialog.__init__(self, parent, Qt.FramelessWindowHint)
        QDialog.__init__(self, parent)
        self.setupUi(self)
        
        rawxem = ok.FrontPanel()
        #count = 2
        count = rawxem.GetDeviceCount()
        print count
    
        self.xemList = []
          
        BIT_FILE_LIST = [BIT_FILE,  BIT_FILE2]
        #BIT_FILE_LIST = [BIT_FILE]
        for i in xrange(count):
            
            serX = rawxem.GetDeviceListSerial(i)
            print "serial = ",  serX    
            self.nerfModel = FpgaDevice(serX,  BIT_FILE_LIST[i])
            self.xemList.append(self.nerfModel)
      
            
        # SEND SINEWAVE ALWAYS 
        pipeInData = gen_sin(F = 1.0, AMP = 100.0,  T = 2.0)
        self.xemList[1].SendPipe(pipeInData)
        
    
        
        self.dispView = View(None, VIEWER_REFRESH_RATE, CHIN_PARAM)

        self.dispView.show()
        self.data = []
        self.isLogData = False
        
        # Create float_spin for each input channel
        self.ctrl_all = []
        for (trig_id, name, type, value) in CHOUT_PARAM:
            exec interp('self.ctrl_#{name} = CtrlChannel(hostDialog=self, name=name, id=trig_id, type=type, value=value)')
            exec interp('self.connect(self.ctrl_#{name}.doubleSpinBox, SIGNAL("editingFinished()"), self.onNewWireIn)')
            exec interp('self.connect(self.ctrl_#{name}.doubleSpinBox, SIGNAL("valueChanged(double)"), self.onNewWireIn)')
            exec interp('self.ctrl_all.append(self.ctrl_#{name})')        
        
        # Timer for pulling data, separated from timer_display
        self.timer = QTimer(self)
        self.connect(self.timer, SIGNAL("timeout()"), self.onSyncData)       
        self.timer.start(VIEWER_REFRESH_RATE )
        
        
        self.on_horizontalSlider_valueChanged(5)

开发者ID:wonjsohn，项目名称:sarcos，代码行数:52，代码来源:Controls.py

示例4: User

class User(QDialog, Ui_Dialog):
    """
    Class documentation goes here.
    """
    def __init__(self, parent = None):
        """
        Constructor
        """
#        QDialog.__init__(self, parent, Qt.FramelessWindowHint)
        QDialog.__init__(self, parent)
        self.setupUi(self)
        
        self.nerfModel = Model()
        
        pipeInData = gen_sin(F = 1.0, AMP = 100.0,  T = 2.0)
        self.nerfModel.SendPipe(pipeInData)
        
        self.dispView = View(None, VIEWER_REFRESH_RATE, CHIN_PARAM)

        self.dispView.show()
        self.data = []
        self.isLogData = False
        
        # Create float_spin for each input channel
        self.ctrl_all = []
        for (trig_id, name, type, value) in CHOUT_PARAM:
            exec interp('self.ctrl_#{name} = CtrlChannel(hostDialog=self, name=name, id=trig_id, type=type, value=value)')
            exec interp('self.connect(self.ctrl_#{name}.doubleSpinBox, SIGNAL("editingFinished()"), self.onNewWireIn)')
            exec interp('self.connect(self.ctrl_#{name}.doubleSpinBox, SIGNAL("valueChanged(double)"), self.onNewWireIn)')
            exec interp('self.ctrl_all.append(self.ctrl_#{name})')        
        
        # Timer for pulling data, separated from timer_display
        self.timer = QTimer(self)
        self.connect(self.timer, SIGNAL("timeout()"), self.onSyncData)       
        self.timer.start(VIEWER_REFRESH_RATE )
        
        
        self.on_horizontalSlider_valueChanged(5)
        


    def onSyncData(self):
        """
        Core function of Controller, which polls data from Model(fpga) and sends them to Viewer.
        """
        newData = []
        for xaddr, xtype in zip(DATA_OUT_ADDR, CH_TYPE):
            #newData[i] = self.nerfModel.ReadFPGA(DATA_OUT_ADDR[i], CH_TYPE[i])
#            if i == 3: 
#                newData[i] = newData[i] / 100
            newData.append(max(-16777216, min(16777216, self.nerfModel.ReadFPGA(xaddr, xtype))))
            print newData[0::6]   # printing 
            #        newSpike1 = self.nerfModel.ReadPipe(0xA0, 5000) # read ## bytes
#        newSpike2 = self.nerfModel.ReadPipe(0xA1, 5000) # read ## bytes
#        newSpike3 = self.nerfModel.ReadPipe(0xA2, 5000) # read ## bytes
#        newSpike4 = self.nerfModel.ReadPipe(0xA3, 5000) # read ## bytes
#        newSpike5 = self.nerfModel.ReadPipe(0xA4, 5000) # read ## bytes
        newSpike1 = ""
        newSpike2 = ""
        newSpike3 = ""
        newSpike4 = ""
        newSpike5 = ""
        

        #newSpike = "" # read ## bytes
        
        self.dispView.newDataIO(newData, [newSpike1, newSpike2, newSpike3, newSpike4, newSpike5])
        #self.dispView.newDataIO(newData, [])
        if (self.isLogData):
            self.data.append(newData)
        
    def onClkRate(self, value):   
        """ value = how many times of 1/10 real-time
        """
        # F_fpga = C * NUM_NEURON * V * F_emu ,  (C : cycles_per_neuron = 2,  V = 365)
        # if F_fpga = 200Mhz,  F_emu = 1khz)
        # halfcnt = F_fpga / F_neuron / 2 = F_fpga / (C * NUM_NEURON * V * F_emu) / 2
        NUM_CYCLE = 2
        newHalfCnt = 200 * (10 **6) / (NUM_CYCLE * NUM_NEURON * value * SAMPLING_RATE/10 ) /2 
        print 'halfcnt=%d' %newHalfCnt
        print 'value=%d' %value

        self.nerfModel.SendPara(bitVal = newHalfCnt, trigEvent = DATA_EVT_CLKRATE)
        
    def onNewWireIn(self):
        for ctrl in self.ctrl_all:
            newWireIn = ctrl.doubleSpinBox.value()
            if newWireIn != ctrl.currVal:
                ctrl.currValue = newWireIn
                if (ctrl.type == 'int32'):
                    bitVal = ConvertType(floor(newWireIn),  fromType = 'i',  toType = 'I')
#                    print bitVal
                elif (ctrl.type == 'float32'):
                    bitVal = ConvertType(newWireIn, fromType = 'f', toType = 'I')
                self.nerfModel.SendPara(bitVal = bitVal, trigEvent = ctrl.id)
                


    def plotData(self, data):
        from pylab import plot, show, subplot
#.........这里部分代码省略.........

开发者ID:wonjsohn，项目名称:sarcos，代码行数:101，代码来源:temp_Controls.py

示例5: User

class User(QDialog, Ui_Dialog):
    """
    Class documentation goes here.
    """
    def __init__(self, parent = None):
        """
        Constructor
        """
#        QDialog.__init__(self, parent, Qt.FramelessWindowHint)
        QDialog.__init__(self, parent)
        self.setupUi(self)
        
        self.nerfModel = Model()
        self.dispView = View(None, NUM_CHANNEL, DISPLAY_SCALING, VIEWER_REFRESH_RATE, \
                             CHANNEL_COLOR)
                             

        self.dispView.show()
        self.data = []
        self.isLogData = False
        
        self.connect(self.dispView.timer, SIGNAL("timeout()"), self.onCheckMoney)
#        self.connect(self, SIGNAL("initRT"), self.on_horizontalSlider_sliderMoved)
#        self.emit(SIGNAL("initRT"), 1)
        self.on_horizontalSlider_valueChanged(1)
        
#        self.connect(self.doubleSpinBox_0, SIGNAL("editingFinished()"), self.onNewWire00In)
#        self.connect(self.doubleSpinBox_0, SIGNAL("valueChanged(double)"), self.onNewWire00In)
#
#        self.connect(self.doubleSpinBox_1, SIGNAL("editingFinished()"), self.onNewWire01In)
#        self.connect(self.doubleSpinBox_1, SIGNAL("valueChanged(double)"), self.onNewWire01In)

        self.connect(self.doubleSpinBox_2, SIGNAL("editingFinished()"), self.onNewWireIn2)
        self.connect(self.doubleSpinBox_2, SIGNAL("valueChanged(double)"), self.onNewWireIn2)

        self.connect(self.doubleSpinBox_3, SIGNAL("editingFinished()"), self.onNewWireIn3)
        self.connect(self.doubleSpinBox_3, SIGNAL("valueChanged(double)"), self.onNewWireIn3)
#
        self.connect(self.doubleSpinBox_4, SIGNAL("editingFinished()"), self.onNewWireIn4)
        self.connect(self.doubleSpinBox_4, SIGNAL("valueChanged(double)"), self.onNewWireIn4)

        self.connect(self.doubleSpinBox_5, SIGNAL("editingFinished()"), self.onNewWireIn5)
        self.connect(self.doubleSpinBox_5, SIGNAL("valueChanged(double)"), self.onNewWireIn5)

        self.connect(self.doubleSpinBox_6, SIGNAL("editingFinished()"), self.onNewWireIn6)
        self.connect(self.doubleSpinBox_6, SIGNAL("valueChanged(double)"), self.onNewWireIn6)
#
#        self.connect(self.doubleSpinBox_7, SIGNAL("editingFinished()"), self.onNewWire07In)
#        self.connect(self.doubleSpinBox_7, SIGNAL("valueChanged(double)"), self.onNewWire07In)
#        
#        self.connect(self.doubleSpinBox_8, SIGNAL("editingFinished()"), self.onNewWire08In)
#        self.connect(self.doubleSpinBox_8, SIGNAL("valueChanged(double)"), self.onNewWire08In)
#
#        self.connect(self.doubleSpinBox_9, SIGNAL("editingFinished()"), self.onNewWire09In)
#        self.connect(self.doubleSpinBox_9, SIGNAL("valueChanged(double)"), self.onNewWire09In)

        self.connect(self.doubleSpinBox_14, SIGNAL("editingFinished()"), self.onNewWireIn14)
        self.connect(self.doubleSpinBox_14, SIGNAL("valueChanged(double)"), self.onNewWireIn14)
        
        self.connect(self.doubleSpinBox_15, SIGNAL("editingFinished()"), self.onNewWireIn15)
        self.connect(self.doubleSpinBox_15, SIGNAL("valueChanged(double)"), self.onNewWireIn15)


    def onCheckMoney(self):
        """
        This method is the handler for "WANT MONEY" messages,
        """
        newData = [0.0 for ix in range(NUM_CHANNEL)]
        
        for i in xrange(NUM_CHANNEL):
            newData[i] = self.nerfModel.ReadFPGA(DATA_OUT_ADDR[i], CH_TYPE[i])
            #if i == 3: 
                #newData[i] = newData[i] / 100
            #newData[i] = max(-65535, min(65535, self.nerfModel.ReadFPGA(DATA_OUT_ADDR[i], CH_TYPE[i])))
            if i == 5:
                print newData[i]
            
#        newSpike = self.nerfModel.ReadPipe(0xA1, 4000) # read ## bytes
        
        self.dispView.newData(newData)
#        if (self.isLogData):
#            self.data.append(newData)
        
    def onClkRate(self, value):   
        newHalfCnt = 100 * (10 **6) / SAMPLING_RATE / NUM_NEURON / value / 2 / 4
        self.nerfModel.SendPara(newVal = newHalfCnt, trigEvent = DATA_EVT_CLKRATE)
        
#    def onNewWireIn(self, evt):
#        newWireIn = eval('self.doubleSpinBox_'+str(evt)+u'.value()')
#        self.nerfModel.SendPara(newVal = newWireIn, trigEvent = evt)
   
    def onNewWireIn2(self):
        newWireIn = eval('self.doubleSpinBox_'+str(2)+u'.value()')
        self.nerfModel.SendPara(newVal = newWireIn, trigEvent = 2)

    def onNewWireIn3(self):
        newWireIn = self.doubleSpinBox_3.value()
        if SEND_TYPE[3] == 'int32': newWireIn = int(newWireIn)
        self.nerfModel.SendPara(newVal = newWireIn, trigEvent = 3)
        
#.........这里部分代码省略.........

开发者ID:usc-bbdl，项目名称:R01_HSC_NI_system，代码行数:101，代码来源:Controls.py

示例6: init

    def __init__(self, parent = None):
        """
        Constructor
        """
#        QDialog.__init__(self, parent, Qt.FramelessWindowHint)
        QDialog.__init__(self, parent)
        self.setupUi(self)
        
        rawxem = ok.FrontPanel()
        #count = 2
        count = rawxem.GetDeviceCount()
        print count
    
        
        
        self.xemList = []
        
        
        
        BIT_FILE_LIST = [BIT_FILE,  BIT_FILE2]
        
        """    Getting 2 devices   """
        #BIT_FILE_LIST = [BIT_FILE]
#        for i in xrange(count=2):
#            serX = rawxem.GetDeviceListSerial(i)
#            print "serial = ",  serX    
#            self.nerfModel = FpgaDevice(serX,  BIT_FILE_LIST[i])
#            self.xemList.append(self.nerfModel)
        """ Typing in the series numbers directly for each boards"""  
        """ working board choices: 1137000222  /  1201000216/  12320003RM / 12320003RN """
        self.nerfModel = FpgaDevice("1137000222",  BIT_FILE_LIST[0])  # short latency part + muscle / spindle
        self.xemList.append(self.nerfModel)
        self.nerfModel = FpgaDevice("12320003RN",  BIT_FILE_LIST[1])  # transcortical part
        self.xemList.append(self.nerfModel)
            
        


#        # SEND SINEWAVE ALWAYS 
#        pipeInData = gen_sin(F = 1.0, AMP = 100.0,  T = 2.0)
#        self.xemList[1].SendPipe(pipeInData)
#        
        
        #pipeInData = gen_sin(F = 1.0, AMP = 100.0,  T = 2.0)
        #self.nerfModel.SendPipe(pipeInData)
        
        self.dispView = View(None, VIEWER_REFRESH_RATE, CHIN_PARAM)

        self.dispView.show()
        self.data = []
        self.isLogData = False
        
        # Create float_spin for each input channel
        self.ctrl_all = []
        for (trig_id, name, type, value) in CHOUT_PARAM:
            exec interp('self.ctrl_#{name} = CtrlChannel(hostDialog=self, name=name, id=trig_id, type=type, value=value)')
            exec interp('self.connect(self.ctrl_#{name}.doubleSpinBox, SIGNAL("editingFinished()"), self.onNewWireIn)')
            exec interp('self.connect(self.ctrl_#{name}.doubleSpinBox, SIGNAL("valueChanged(double)"), self.onNewWireIn)')
            exec interp('self.ctrl_all.append(self.ctrl_#{name})')        
        
        # Timer for pulling data, separated from timer_display
        self.timer = QTimer(self)
        self.connect(self.timer, SIGNAL("timeout()"), self.onSyncData)       
        self.timer.start(VIEWER_REFRESH_RATE )
        
        
        self.on_horizontalSlider_valueChanged(5)

开发者ID:usc-bbdl，项目名称:R01_HSC_NI_system，代码行数:67，代码来源:Controls.py

示例7: User

class User(QDialog, Ui_Dialog):
    """
    Class documentation goes here.
    """
    def __init__(self, parent = None):
        """
        Constructor
        """
#        QDialog.__init__(self, parent, Qt.FramelessWindowHint)
        QDialog.__init__(self, parent)
        self.setupUi(self)
        
        self.nerfModel = Model()
        self.dispView = View(None, NUM_CHANNEL, DISPLAY_SCALING, VIEWER_REFRESH_RATE, \
                             CHANNEL_COLOR)
                             

        self.dispView.show()
        self.data = []
        self.isLogData = False
        
        self.connect(self.dispView.timer, SIGNAL("timeout()"), self.onCheckMoney)
#        self.connect(self, SIGNAL("initRT"), self.on_horizontalSlider_sliderMoved)
#        self.emit(SIGNAL("initRT"), 1)
        self.on_horizontalSlider_valueChanged(1)
        
#        self.connect(self.doubleSpinBox_0, SIGNAL("editingFinished()"), self.onNewWire00In)
#        self.connect(self.doubleSpinBox_0, SIGNAL("valueChanged(double)"), self.onNewWire00In)
#
#        self.connect(self.doubleSpinBox_1, SIGNAL("editingFinished()"), self.onNewWire01In)
#        self.connect(self.doubleSpinBox_1, SIGNAL("valueChanged(double)"), self.onNewWire01In)

        self.connect(self.doubleSpinBox_2, SIGNAL("editingFinished()"), self.onNewWireIn2)
        self.connect(self.doubleSpinBox_2, SIGNAL("valueChanged(double)"), self.onNewWireIn2)

#        self.connect(self.doubleSpinBox_3, SIGNAL("editingFinished()"), self.onNewWire03In)
#        self.connect(self.doubleSpinBox_3, SIGNAL("valueChanged(double)"), self.onNewWire03In)
#
        self.connect(self.doubleSpinBox_4, SIGNAL("editingFinished()"), self.onNewWireIn4)
        self.connect(self.doubleSpinBox_4, SIGNAL("valueChanged(double)"), self.onNewWireIn4)

        self.connect(self.doubleSpinBox_5, SIGNAL("editingFinished()"), self.onNewWireIn5)
        self.connect(self.doubleSpinBox_5, SIGNAL("valueChanged(double)"), self.onNewWireIn5)

#        self.connect(self.doubleSpinBox_6, SIGNAL("editingFinished()"), self.onNewWire06In)
#        self.connect(self.doubleSpinBox_6, SIGNAL("valueChanged(double)"), self.onNewWire06In)
#
#        self.connect(self.doubleSpinBox_7, SIGNAL("editingFinished()"), self.onNewWire07In)
#        self.connect(self.doubleSpinBox_7, SIGNAL("valueChanged(double)"), self.onNewWire07In)
#        
#        self.connect(self.doubleSpinBox_8, SIGNAL("editingFinished()"), self.onNewWire08In)
#        self.connect(self.doubleSpinBox_8, SIGNAL("valueChanged(double)"), self.onNewWire08In)
#
#        self.connect(self.doubleSpinBox_9, SIGNAL("editingFinished()"), self.onNewWire09In)
#        self.connect(self.doubleSpinBox_9, SIGNAL("valueChanged(double)"), self.onNewWire09In)

        self.connect(self.doubleSpinBox_14, SIGNAL("editingFinished()"), self.onNewWireIn14)
        self.connect(self.doubleSpinBox_14, SIGNAL("valueChanged(double)"), self.onNewWireIn14)
        
        self.connect(self.doubleSpinBox_15, SIGNAL("editingFinished()"), self.onNewWireIn15)
        self.connect(self.doubleSpinBox_15, SIGNAL("valueChanged(double)"), self.onNewWireIn15)


    def onCheckMoney(self):
        """
        This method is the handler for "WANT MONEY" messages,
        """
        newData = [0.0 for ix in range(NUM_CHANNEL)]
        
        for i in xrange(NUM_CHANNEL):
            #newVal[i] = self.nerfModel.ReadFPGA(DATA_OUT_ADDR[i])
            newData[i] = max(-65535, min(65535, self.nerfModel.ReadFPGA(DATA_OUT_ADDR[i], CH_TYPE[i])))
#            if i == 0:
#                print newData[i]
            
        self.dispView.newData(newData)
        if (self.isLogData):
            self.data.append(newData)
        
    def onClkRate(self, value):   
        newHalfCnt = 200 * (10 **6) / SAMPLING_RATE / NUM_NEURON / value / 2 / 4
        self.nerfModel.SendPara(newVal = newHalfCnt, trigEvent = DATA_EVT_CLKRATE)
        
#    def onNewWireIn(self, evt):
#        newWireIn = eval('self.doubleSpinBox_'+str(evt)+u'.value()')
#        self.nerfModel.SendPara(newVal = newWireIn, trigEvent = evt)
   
    def onNewWireIn2(self):
        newWireIn = eval('self.doubleSpinBox_'+str(2)+u'.value()')
        self.nerfModel.SendPara(newVal = newWireIn, trigEvent = 2)

    def onNewWireIn4(self):
        newWireIn = self.doubleSpinBox_4.value()
        print newWireIn, 
        self.nerfModel.SendPara(newVal = newWireIn, trigEvent = 4)

    def onNewWireIn5(self):
        newWireIn = self.doubleSpinBox_5.value()
        self.nerfModel.SendPara(newVal = newWireIn, trigEvent = 5)

#.........这里部分代码省略.........

开发者ID:usc-bbdl，项目名称:R01_HSC_NI_system，代码行数:101，代码来源:Controls.py

注：本文中的Display.View类示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

示例1: __init__

示例2: __init__

示例3: __init__