Python OptionParser.install_connector_options方法代码示例

# 需要导入模块: from ClusterShell.CLI.OptionParser import OptionParser [as 别名]
# 或者: from ClusterShell.CLI.OptionParser.OptionParser import install_connector_options [as 别名]
    def testClushConfigSetRlimit(self):
        """test CLI.Config.ClushConfig (setrlimit)"""
        soft, hard = resource.getrlimit(resource.RLIMIT_NOFILE)
        hard2 = min(32768, hard)
        f = tempfile.NamedTemporaryFile(prefix='testclushconfig')
        f.write("""
[Main]
fanout: 42
connect_timeout: 14
command_timeout: 0
history_size: 100
color: auto
fd_max: %d
verbosity: 1
""" % hard2)

        f.flush()
        parser = OptionParser("dummy")
        parser.install_display_options(verbose_options=True)
        parser.install_connector_options()
        options, _ = parser.parse_args([])
        config = ClushConfig(options, filename=f.name)
        self.assert_(config != None)
        display = Display(options, config)
        self.assert_(display != None)

        # force a lower soft limit
        resource.setrlimit(resource.RLIMIT_NOFILE, (hard2/2, hard))
        # max_fdlimit should increase soft limit again
        set_fdlimit(config.fd_max, display)
        # verify
        soft, hard = resource.getrlimit(resource.RLIMIT_NOFILE)
        self.assertEqual(soft, hard2)
        f.close()

# 需要导入模块: from ClusterShell.CLI.OptionParser import OptionParser [as 别名]
# 或者: from ClusterShell.CLI.OptionParser.OptionParser import install_connector_options [as 别名]
    def testClushConfigSetRlimitValueError(self):
        """test CLI.Config.ClushConfig (setrlimit ValueError)"""
        soft, hard = resource.getrlimit(resource.RLIMIT_NOFILE)
        f = tempfile.NamedTemporaryFile(prefix='testclushconfig')
        f.write(dedent("""
            [Main]
            fanout: 42
            connect_timeout: 14
            command_timeout: 0
            history_size: 100
            color: auto
            # Use wrong fd_max value to generate ValueError
            fd_max: -1
            verbosity: 1"""))
        f.flush()
        parser = OptionParser("dummy")
        parser.install_config_options()
        parser.install_display_options(verbose_options=True)
        parser.install_connector_options()
        options, _ = parser.parse_args([])
        config = ClushConfig(options, filename=f.name)
        f.close()
        display = Display(options, config)

        class TestException(Exception): pass

        def mock_vprint_err(level, message):
            if message.startswith('Warning: Failed to set max open files'):
                raise TestException()

        display.vprint_err = mock_vprint_err
        self.assertRaises(TestException, set_fdlimit, config.fd_max, display)

        soft2, _ = resource.getrlimit(resource.RLIMIT_NOFILE)
        self.assertEqual(soft, soft2)

# 需要导入模块: from ClusterShell.CLI.OptionParser import OptionParser [as 别名]
# 或者: from ClusterShell.CLI.OptionParser.OptionParser import install_connector_options [as 别名]
    def testClushConfigFull(self):
        """test CLI.Config.ClushConfig (full)"""

        f = tempfile.NamedTemporaryFile(prefix='testclushconfig')
        f.write("""
[Main]
fanout: 42
connect_timeout: 14
command_timeout: 0
history_size: 100
color: auto
node_count: yes
verbosity: 1
ssh_user: root
ssh_path: /usr/bin/ssh
ssh_options: -oStrictHostKeyChecking=no
""")

        f.flush()
        parser = OptionParser("dummy")
        parser.install_display_options(verbose_options=True)
        parser.install_connector_options()
        options, _ = parser.parse_args([])
        config = ClushConfig(options, filename=f.name)
        self.assert_(config != None)
        self.assertEqual(config.color, WHENCOLOR_CHOICES[2])
        self.assertEqual(config.verbosity, VERB_STD)
        self.assertEqual(config.node_count, True)
        self.assertEqual(config.fanout, 42)
        self.assertEqual(config.connect_timeout, 14)
        self.assertEqual(config.command_timeout, 0)
        self.assertEqual(config.ssh_user, "root")
        self.assertEqual(config.ssh_path, "/usr/bin/ssh")
        self.assertEqual(config.ssh_options, "-oStrictHostKeyChecking=no")
        f.close()

# 需要导入模块: from ClusterShell.CLI.OptionParser import OptionParser [as 别名]
# 或者: from ClusterShell.CLI.OptionParser.OptionParser import install_connector_options [as 别名]
    def testClushConfigDefault(self):
        """test CLI.Config.ClushConfig (default)"""

        f = tempfile.NamedTemporaryFile(prefix='testclushconfig')
        f.write(dedent("""
            [Main]
            fanout: 42
            connect_timeout: 14
            command_timeout: 0
            history_size: 100
            color: auto
            verbosity: 1
            #ssh_user: root
            #ssh_path: /usr/bin/ssh
            #ssh_options: -oStrictHostKeyChecking=no""").encode())
        f.flush()
        parser = OptionParser("dummy")
        parser.install_clush_config_options()
        parser.install_display_options(verbose_options=True)
        parser.install_connector_options()
        options, _ = parser.parse_args([])
        config = ClushConfig(options, filename=f.name)
        display = Display(options, config)
        display.vprint(VERB_STD, "test")
        display.vprint(VERB_DEBUG, "shouldn't see this")
        self.assertEqual(config.color, WHENCOLOR_CHOICES[2])
        self.assertEqual(config.verbosity, VERB_STD)
        self.assertEqual(config.node_count, True)
        self.assertEqual(config.fanout, 42)
        self.assertEqual(config.connect_timeout, 14)
        self.assertEqual(config.command_timeout, 0)
        self.assertEqual(config.ssh_user, None)
        self.assertEqual(config.ssh_path, None)
        self.assertEqual(config.ssh_options, None)
        f.close()

# 需要导入模块: from ClusterShell.CLI.OptionParser import OptionParser [as 别名]
# 或者: from ClusterShell.CLI.OptionParser.OptionParser import install_connector_options [as 别名]
    def testClushConfigDefaultWithOptions(self):
        """test CLI.Config.ClushConfig (default with options)"""

        f = tempfile.NamedTemporaryFile(prefix='testclushconfig')
        f.write(dedent("""
            [Main]
            fanout: 42
            connect_timeout: 14
            command_timeout: 0
            history_size: 100
            color: auto
            verbosity: 1""").encode())
        f.flush()
        parser = OptionParser("dummy")
        parser.install_clush_config_options()
        parser.install_display_options(verbose_options=True)
        parser.install_connector_options()
        options, _ = parser.parse_args(["-f", "36", "-u", "3", "-t", "7",
                                        "--user", "foobar", "--color",
                                        "always", "-d", "-v", "-q", "-o",
                                        "-oSomething"])
        config = ClushConfig(options, filename=f.name)
        display = Display(options, config)
        display.vprint(VERB_STD, "test")
        display.vprint(VERB_DEBUG, "test")
        self.assertEqual(config.color, WHENCOLOR_CHOICES[1])
        self.assertEqual(config.verbosity, VERB_DEBUG) # takes biggest
        self.assertEqual(config.fanout, 36)
        self.assertEqual(config.connect_timeout, 7)
        self.assertEqual(config.command_timeout, 3)
        self.assertEqual(config.ssh_user, "foobar")
        self.assertEqual(config.ssh_path, None)
        self.assertEqual(config.ssh_options, "-oSomething")
        f.close()

# 需要导入模块: from ClusterShell.CLI.OptionParser import OptionParser [as 别名]
# 或者: from ClusterShell.CLI.OptionParser.OptionParser import install_connector_options [as 别名]
    def testClushConfigAlmostEmpty(self):
        """test CLI.Config.ClushConfig (almost empty)"""

        f = tempfile.NamedTemporaryFile(prefix="testclushconfig")
        f.write(
            """
[Main]
"""
        )

        parser = OptionParser("dummy")
        parser.install_display_options(verbose_options=True)
        parser.install_connector_options()
        options, _ = parser.parse_args([])
        config = ClushConfig(options, filename=f.name)
        self.assert_(config != None)
        self.assertEqual(config.color, WHENCOLOR_CHOICES[-1])
        self.assertEqual(config.verbosity, VERB_STD)
        self.assertEqual(config.node_count, True)
        self.assertEqual(config.fanout, 64)
        self.assertEqual(config.connect_timeout, 30)
        self.assertEqual(config.command_timeout, 0)
        self.assertEqual(config.ssh_user, None)
        self.assertEqual(config.ssh_path, None)
        self.assertEqual(config.ssh_options, None)
        f.close()

# 需要导入模块: from ClusterShell.CLI.OptionParser import OptionParser [as 别名]
# 或者: from ClusterShell.CLI.OptionParser.OptionParser import install_connector_options [as 别名]
 def testOptionParser2(self):
     """test CLI.OptionParser (2)"""
     parser = OptionParser("dummy")
     parser.install_nodes_options()
     parser.install_display_options(verbose_options=True, separator_option=True)
     parser.install_filecopy_options()
     parser.install_connector_options()
     options, _ = parser.parse_args([])

# 需要导入模块: from ClusterShell.CLI.OptionParser import OptionParser [as 别名]
# 或者: from ClusterShell.CLI.OptionParser.OptionParser import install_connector_options [as 别名]
    def testClushConfigUserOverride(self):
        """test CLI.Config.ClushConfig (XDG_CONFIG_HOME user config)"""

        # XXX Test should be improved when CLUSTERSHELL_CONFIG is available
        # Improvement: override CLUSTERSHELL_CONFIG and set a sys clush config
        # then verify that user config overrides CLUSTERSHELL_CONFIG as
        # expected...
        # For now, it has been tested manually. This test only really only
        # ensures that user config is taken into account.

        xdg_config_home_save = os.environ.get('XDG_CONFIG_HOME')

        # Create fake XDG_CONFIG_HOME
        dname = make_temp_dir()
        try:
            os.environ['XDG_CONFIG_HOME'] = dname

            # create $XDG_CONFIG_HOME/clustershell/clush.conf
            usercfgdir = os.path.join(dname, 'clustershell')
            os.mkdir(usercfgdir)
            cfgfile = open(os.path.join(usercfgdir, 'clush.conf'), 'w')
            cfgfile.write("""
[Main]
fanout: 42
connect_timeout: 14
command_timeout: 0
history_size: 100
color: never
verbosity: 2
ssh_user: trump
ssh_path: ~/bin/ssh
ssh_options: -oSomeDummyUserOption=yes
""")

            cfgfile.flush()
            parser = OptionParser("dummy")
            parser.install_config_options()
            parser.install_display_options(verbose_options=True)
            parser.install_connector_options()
            options, _ = parser.parse_args([])
            config = ClushConfig(options) # filename=None to use defaults!
            self.assertEqual(config.color, WHENCOLOR_CHOICES[0])
            self.assertEqual(config.verbosity, VERB_VERB) # takes biggest
            self.assertEqual(config.fanout, 42)
            self.assertEqual(config.connect_timeout, 14)
            self.assertEqual(config.command_timeout, 0)
            self.assertEqual(config.ssh_user, 'trump')
            self.assertEqual(config.ssh_path, '~/bin/ssh')
            self.assertEqual(config.ssh_options, '-oSomeDummyUserOption=yes')
            cfgfile.close()

        finally:
            if xdg_config_home_save:
                os.environ['XDG_CONFIG_HOME'] = xdg_config_home_save
            else:
                del os.environ['XDG_CONFIG_HOME']
            shutil.rmtree(dname, ignore_errors=True)

# 需要导入模块: from ClusterShell.CLI.OptionParser import OptionParser [as 别名]
# 或者: from ClusterShell.CLI.OptionParser.OptionParser import install_connector_options [as 别名]
    def testClushConfigError(self):
        """test CLI.Config.ClushConfig (error)"""

        f = tempfile.NamedTemporaryFile(prefix='testclushconfig')
        f.write(dedent("""
            [Main]
            fanout: 3.2
            connect_timeout: foo
            command_timeout: bar
            history_size: 100
            color: maybe
            node_count: 3
            verbosity: bar
            ssh_user: root
            ssh_path: /usr/bin/ssh
            ssh_options: -oStrictHostKeyChecking=no
            """).encode())

        f.flush()
        parser = OptionParser("dummy")
        parser.install_clush_config_options()
        parser.install_display_options(verbose_options=True)
        parser.install_connector_options()
        options, _ = parser.parse_args([])
        config = ClushConfig(options, filename=f.name)
        try:
            c = config.color
            self.fail("Exception ClushConfigError not raised (color)")
        except ClushConfigError:
            pass
        self.assertEqual(config.verbosity, 0) # probably for compatibility
        try:
            f = config.fanout
            self.fail("Exception ClushConfigError not raised (fanout)")
        except ClushConfigError:
            pass
        try:
            f = config.node_count
            self.fail("Exception ClushConfigError not raised (node_count)")
        except ClushConfigError:
            pass
        try:
            f = config.fanout
        except ClushConfigError as e:
            self.assertEqual(str(e)[0:20], "(Config Main.fanout)")

        try:
            t = config.connect_timeout
            self.fail("Exception ClushConfigError not raised (connect_timeout)")
        except ClushConfigError:
            pass
        try:
            m = config.command_timeout
            self.fail("Exception ClushConfigError not raised (command_timeout)")
        except ClushConfigError:
            pass
        f.close()

# 需要导入模块: from ClusterShell.CLI.OptionParser import OptionParser [as 别名]
# 或者: from ClusterShell.CLI.OptionParser.OptionParser import install_connector_options [as 别名]
 def testClushConfigWithInstalledConfig(self):
     """test CLI.Config.ClushConfig (installed config required)"""
     # This test needs installed configuration files (needed for
     # maximum coverage).
     parser = OptionParser("dummy")
     parser.install_display_options(verbose_options=True)
     parser.install_connector_options()
     options, _ = parser.parse_args([])
     config = ClushConfig(options)
     self.assert_(config != None)

# 需要导入模块: from ClusterShell.CLI.OptionParser import OptionParser [as 别名]
# 或者: from ClusterShell.CLI.OptionParser.OptionParser import install_connector_options [as 别名]
def main():
    """clush script entry point"""
    sys.excepthook = clush_excepthook

    #
    # Argument management
    #
    usage = "%prog [options] command"

    parser = OptionParser(usage)

    parser.add_option("--nostdin", action="store_true", dest="nostdin",
                      help="don't watch for possible input from stdin")

    parser.install_config_options('clush.conf(5)')
    parser.install_nodes_options()
    parser.install_display_options(verbose_options=True)
    parser.install_filecopy_options()
    parser.install_connector_options()

    (options, args) = parser.parse_args()

    #
    # Load config file and apply overrides
    #
    config = ClushConfig(options)

    # Should we use ANSI colors for nodes?
    if config.color == "auto":
        color = sys.stdout.isatty() and (options.gatherall or \
                                         sys.stderr.isatty())
    else:
        color = config.color == "always"

    try:
        # Create and configure display object.
        display = Display(options, config, color)
    except ValueError, exc:
        parser.error("option mismatch (%s)" % exc)

# 需要导入模块: from ClusterShell.CLI.OptionParser import OptionParser [as 别名]
# 或者: from ClusterShell.CLI.OptionParser.OptionParser import install_connector_options [as 别名]
def main():
    """clush script entry point"""
    sys.excepthook = clush_excepthook

    #
    # Argument management
    #
    usage = "%prog [options] command"

    parser = OptionParser(usage)

    parser.add_option("-n", "--nostdin", action="store_true", dest="nostdin",
                      help="don't watch for possible input from stdin")

    parser.install_groupsconf_option()
    parser.install_clush_config_options()
    parser.install_nodes_options()
    parser.install_display_options(verbose_options=True)
    parser.install_filecopy_options()
    parser.install_connector_options()

    (options, args) = parser.parse_args()

    set_std_group_resolver_config(options.groupsconf)

    #
    # Load config file and apply overrides
    #
    config = ClushConfig(options, options.conf)

    # Initialize logging
    if config.verbosity >= VERB_DEBUG:
        logging.basicConfig(level=logging.DEBUG)
        logging.debug("clush: STARTING DEBUG")
    else:
        logging.basicConfig(level=logging.CRITICAL)

    # Should we use ANSI colors for nodes?
    if config.color == "auto":
        color = sys.stdout.isatty() and (options.gatherall or \
                                         sys.stderr.isatty())
    else:
        color = config.color == "always"

    try:
        # Create and configure display object.
        display = Display(options, config, color)
    except ValueError as exc:
        parser.error("option mismatch (%s)" % exc)

    if options.groupsource:
        # Be sure -a/g -s source work as espected.
        std_group_resolver().default_source_name = options.groupsource

    # Compute the nodeset and warn for possible use of shell pathname
    # expansion (#225)
    wnodelist = []
    xnodelist = []
    if options.nodes:
        wnodelist = [NodeSet(nodes) for nodes in options.nodes]

    if options.exclude:
        xnodelist = [NodeSet(nodes) for nodes in options.exclude]

    for (opt, nodelist) in (('w', wnodelist), ('x', xnodelist)):
        for nodes in nodelist:
            if len(nodes) == 1 and exists(str(nodes)):
                display.vprint_err(VERB_STD, "Warning: using '-%s %s' and "
                                   "local path '%s' exists, was it expanded "
                                   "by the shell?" % (opt, nodes, nodes))

    # --hostfile support (#235)
    for opt_hostfile in options.hostfile:
        try:
            fnodeset = NodeSet()
            with open(opt_hostfile) as hostfile:
                for line in hostfile.read().splitlines():
                    fnodeset.updaten(nodes for nodes in line.split())
            display.vprint_err(VERB_DEBUG,
                               "Using nodeset %s from hostfile %s"
                               % (fnodeset, opt_hostfile))
            wnodelist.append(fnodeset)
        except IOError as exc:
            # re-raise as OSError to be properly handled
            errno, strerror = exc.args
            raise OSError(errno, strerror, exc.filename)

    # Instantiate target nodeset from command line and hostfile
    nodeset_base = NodeSet.fromlist(wnodelist)
    # Instantiate filter nodeset (command line only)
    nodeset_exclude = NodeSet.fromlist(xnodelist)

    # Specified engine prevails over default engine
    DEFAULTS.engine = options.engine

    # Do we have nodes group?
    task = task_self()
    task.set_info("debug", config.verbosity >= VERB_DEBUG)
    if config.verbosity == VERB_DEBUG:
        std_group_resolver().set_verbosity(1)
#.........这里部分代码省略.........