Python CANONLoader.oa1_files方法代码示例

本文整理汇总了Python中CANON.CANONLoader.oa1_files方法的典型用法代码示例。如果您正苦于以下问题：Python CANONLoader.oa1_files方法的具体用法？Python CANONLoader.oa1_files怎么用？Python CANONLoader.oa1_files使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类CANON.CANONLoader的用法示例。

在下文中一共展示了CANONLoader.oa1_files方法的9个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Python代码示例。

示例1:

# 需要导入模块: from CANON import CANONLoader [as 别名]
# 或者: from CANON.CANONLoader import oa1_files [as 别名]
  'eastward_sea_water_velocity_HR', 'northward_sea_water_velocity_HR',
  'SEA_WATER_SALINITY_HR', 'SEA_WATER_TEMPERATURE_HR', 'SW_FLUX_HR', 'AIR_TEMPERATURE_HR',
  'EASTWARD_WIND_HR', 'NORTHWARD_WIND_HR', 'WIND_SPEED_HR'
]

cl.m1_startDatetime = startdate
cl.m1_endDatetime = enddate

# Mooring 0A1
#cl.oa1_base = 'http://dods.mbari.org/opendap/data/oa_moorings/deployment_data/OA1/201401/'
#cl.oa1_files = [
#               'OA1_201401.nc'
#               ]
cl.oa1_base = 'http://dods.mbari.org/opendap/data/oa_moorings/deployment_data/OA1/201607/realTime/'
cl.oa1_files = [
               'OA1_201607.nc'  ## new deployment
               ]
cl.oa1_parms = [
               'wind_dir', 'avg_wind_spd', 'atm_press', 'air_temp', 'water_temp',
               'sal', 'O2_conc', 'chl', 'pCO2_water', 'pCO2_air', 'pH',
               ]
cl.oa1_startDatetime = startdate
cl.oa1_endDatetime = enddate

# Mooring 0A2
cl.oa2_base = 'http://dods.mbari.org/opendap/data/oa_moorings/deployment_data/OA2/201609/'
cl.oa2_files = [
               'realTime/OA2_201609.nc'
               ]
cl.oa2_parms = [
               'wind_dir', 'avg_wind_spd', 'atm_press', 'air_temp', 'water_temp',

开发者ID:danellecline，项目名称:stoqs，代码行数:33，代码来源:loadCANON_os2017.py

示例2:

# 需要导入模块: from CANON import CANONLoader [as 别名]
# 或者: from CANON.CANONLoader import oa1_files [as 别名]
cl.m1_base = 'http://dods.mbari.org/opendap/data/ssdsdata/deployments/m1/'
cl.m1_files = [
  '201708/OS_M1_20170808hourly_CMSTV.nc',]
cl.m1_parms = [
  'eastward_sea_water_velocity_HR', 'northward_sea_water_velocity_HR',
  'SEA_WATER_SALINITY_HR', 'SEA_WATER_TEMPERATURE_HR', 'SW_FLUX_HR', 'AIR_TEMPERATURE_HR',
  'EASTWARD_WIND_HR', 'NORTHWARD_WIND_HR', 'WIND_SPEED_HR'
]

cl.m1_startDatetime = startdate
cl.m1_endDatetime = enddate

# Mooring 0A1
cl.oa1_base = 'http://dods.mbari.org/opendap/data/oa_moorings/deployment_data/OA1/201607/realTime/'
cl.oa1_files = [
               'OA1_201607.nc'
               ]
cl.oa1_parms = [
               'wind_dir', 'avg_wind_spd', 'atm_press', 'air_temp', 'water_temp',
               'sal', 'O2_conc', 'chl', 'pCO2_water', 'pCO2_air', 'pH',
               ]
cl.oa1_startDatetime = startdate
cl.oa1_endDatetime = enddate

# Mooring 0A2
cl.oa2_base = 'http://dods.mbari.org/opendap/data/oa_moorings/deployment_data/OA2/201609/'
cl.oa2_files = [
               'realTime/OA2_201609.nc'
               ]
cl.oa2_parms = [
               'wind_dir', 'avg_wind_spd', 'atm_press', 'air_temp', 'water_temp',

开发者ID:danellecline，项目名称:stoqs，代码行数:33，代码来源:loadCANON_may2018.py

示例3:

# 需要导入模块: from CANON import CANONLoader [as 别名]
# 或者: from CANON.CANONLoader import oa1_files [as 别名]
#                'OS_M1_20150729hourly_CMSTV.nc'
                 'OS_M1_20150730hourly_CMSTV.nc'
              ]
cl.m1_parms = [
                'eastward_sea_water_velocity_HR', 'northward_sea_water_velocity_HR',
                'SEA_WATER_SALINITY_HR', 'SEA_WATER_TEMPERATURE_HR', 'SW_FLUX_HR', 'AIR_TEMPERATURE_HR',
                'EASTWARD_WIND_HR', 'NORTHWARD_WIND_HR', 'WIND_SPEED_HR'
              ]

cl.m1_startDatetime = startdate
cl.m1_endDatetime = enddate

# Mooring 0A1
cl.oa1_base = cl.dodsBase + 'CANON/2015_OffSeason/Platforms/Moorings/OA1/'
cl.oa1_files = [
               'OA1_Canon2015_OffSeason.nc'
               ]
cl.oa1_parms = [
               'wind_dir', 'avg_wind_spd', 'atm_press', 'air_temp', 'water_temp',
               'sal', 'O2_conc', 'chl', 'pCO2_water', 'pCO2_air', 'pH',
              ]
cl.oa1_startDatetime = startdate
cl.oa1_endDatetime = enddate

# Mooring 0A2
cl.oa2_base = cl.dodsBase + 'CANON/2015_OffSeason/Platforms/Moorings/OA2/'
cl.oa2_files = [
               'OA2_Canon2015_OffSeason.nc'
               ]
cl.oa2_parms = [
               'wind_dir', 'avg_wind_spd', 'atm_press', 'air_temp', 'water_temp',

开发者ID:carueda，项目名称:stoqs，代码行数:33，代码来源:loadCANON_os2015.py

示例4:

# 需要导入模块: from CANON import CANONLoader [as 别名]
# 或者: from CANON.CANONLoader import oa1_files [as 别名]
    "northward_sea_water_velocity_HR",
    "SEA_WATER_SALINITY_HR",
    "SEA_WATER_TEMPERATURE_HR",
    "SW_FLUX_HR",
    "AIR_TEMPERATURE_HR",
    "EASTWARD_WIND_HR",
    "NORTHWARD_WIND_HR",
    "WIND_SPEED_HR",
]

cl.m1_startDatetime = startdate
cl.m1_endDatetime = enddate

# Mooring 0A1
cl.oa1_base = cl.dodsBase + "CANON/2015_OffSeason/Platforms/Moorings/OA1/"
cl.oa1_files = ["OA1_Canon2015_OffSeason.nc"]
cl.oa1_parms = [
    "wind_dir",
    "avg_wind_spd",
    "atm_press",
    "air_temp",
    "water_temp",
    "sal",
    "O2_conc",
    "chl",
    "pCO2_water",
    "pCO2_air",
    "pH",
]
cl.oa1_startDatetime = startdate
cl.oa1_endDatetime = enddate

开发者ID:josephmfaulkner，项目名称:stoqs，代码行数:33，代码来源:loadCANON_os2015.py

示例5:

# 需要导入模块: from CANON import CANONLoader [as 别名]
# 或者: from CANON.CANONLoader import oa1_files [as 别名]
                'OS_M1_20150729hourly_CMSTV.nc',
                'm1_hs2_20150730.nc',
              ]
cl.m1_parms = [
                'eastward_sea_water_velocity_HR', 'northward_sea_water_velocity_HR',
                'SEA_WATER_SALINITY_HR', 'SEA_WATER_TEMPERATURE_HR', 'SW_FLUX_HR', 'AIR_TEMPERATURE_HR',
                'EASTWARD_WIND_HR', 'NORTHWARD_WIND_HR', 'WIND_SPEED_HR', 
                'bb470', 'bb676', 'fl676',
              ]
cl.m1_startDatetime = startdate
cl.m1_endDatetime = enddate

# Mooring 0A1
cl.oa1_base = cl.dodsBase + 'CANON/2015_Sep/Platforms/Moorings/OA1/'
cl.oa1_files = [
               'OA1_Canon2015_Sep.nc'
               ]
cl.oa1_parms = [
               'wind_dir', 'avg_wind_spd', 'atm_press', 'air_temp', 'water_temp',
               'sal', 'O2_conc', 'chl', 'pCO2_water', 'pCO2_air', 'pH',
              ]
cl.oa1_startDatetime = startdate
cl.oa1_endDatetime = enddate

# Mooring 0A2
cl.oa2_base = cl.dodsBase + 'CANON/2015_Sep/Platforms/Moorings/OA2/'
cl.oa2_files = [
               'OA2_Canon2015_Sep.nc'
               ]
cl.oa2_parms = [
               'wind_dir', 'avg_wind_spd', 'atm_press', 'air_temp', 'water_temp',

开发者ID:josephmfaulkner，项目名称:stoqs，代码行数:33，代码来源:loadCANON_september2015.py

示例6:

# 需要导入模块: from CANON import CANONLoader [as 别名]
# 或者: from CANON.CANONLoader import oa1_files [as 别名]
                'OS_M1_20150729hourly_CMSTV.nc'
              ]
cl.m1_parms = [
                'eastward_sea_water_velocity_HR', 'northward_sea_water_velocity_HR',
                'SEA_WATER_SALINITY_HR', 'SEA_WATER_TEMPERATURE_HR', 'SW_FLUX_HR', 'AIR_TEMPERATURE_HR',
                'EASTWARD_WIND_HR', 'NORTHWARD_WIND_HR', 'WIND_SPEED_HR'
              ]

cl.m1_startDatetime = startdate
cl.m1_endDatetime = enddate

# Mooring 0A1
# note the new location. Location and data by deployment, instead of by campaign
cl.oa1_base = 'http://dods.mbari.org/opendap/data/oa_moorings/deployment_data/OA1/'
cl.oa1_files = [
               '201607/realTime/OA1_201607.nc'
               ]
cl.oa1_parms = [
               'wind_dir', 'avg_wind_spd', 'atm_press', 'air_temp', 'water_temp',
               'sal', 'O2_conc', 'chl', 'pCO2_water', 'pCO2_air', 'pH',
              ]
cl.oa1_startDatetime = startdate
cl.oa1_endDatetime = enddate

# Mooring 0A2
# note the new location. Location and data by deployment, instead of by campaign
cl.oa2_base = 'http://dods.mbari.org/opendap/data/oa_moorings/deployment_data/OA2/201505/'  ## May 2015 to end of May 2016
cl.oa2_files = [
               'OA2_201505.nc'
               ]
#cl.oa2_base = 'http://dods.mbari.org/opendap/data/oa_moorings/deployment_data/OA2/201606/realTime/' # new deployment about June 1 2016

开发者ID:brutzman，项目名称:stoqs，代码行数:33，代码来源:loadCANON_os2016.py

示例7:

# 需要导入模块: from CANON import CANONLoader [as 别名]
# 或者: from CANON.CANONLoader import oa1_files [as 别名]
    "SEA_WATER_SALINITY_HR",
    "SEA_WATER_TEMPERATURE_HR",
    "SW_FLUX_HR",
    "AIR_TEMPERATURE_HR",
    "EASTWARD_WIND_HR",
    "NORTHWARD_WIND_HR",
    "WIND_SPEED_HR",
]

cl.m1_startDatetime = startdate
cl.m1_endDatetime = enddate

# Mooring 0A1
# note the new location. Location and data by deployment, instead of by campaign
cl.oa1_base = "http://dods.mbari.org/opendap/data/oa_moorings/deployment_data/OA1/201401/"
cl.oa1_files = ["OA1_201401.nc"]
cl.oa1_parms = [
    "wind_dir",
    "avg_wind_spd",
    "atm_press",
    "air_temp",
    "water_temp",
    "sal",
    "O2_conc",
    "chl",
    "pCO2_water",
    "pCO2_air",
    "pH",
]
cl.oa1_startDatetime = startdate
cl.oa1_endDatetime = enddate

开发者ID:vitoupen，项目名称:stoqs，代码行数:33，代码来源:loadCANON_os2016.py

示例8:

# 需要导入模块: from CANON import CANONLoader [as 别名]
# 或者: from CANON.CANONLoader import oa1_files [as 别名]
# Mooring M1 Combined file produced by DPforSSDS processing - for just the duration of the campaign
cl.m1_base = 'http://dods.mbari.org/opendap/data/ssdsdata/deployments/m1/201407/'
cl.m1_files = [
                'OS_M1_20140716hourly_CMSTV.nc',
              ]
cl.m1_parms = [ 'eastward_sea_water_velocity_HR', 'northward_sea_water_velocity_HR',
                'SEA_WATER_SALINITY_HR', 'SEA_WATER_TEMPERATURE_HR', 'SW_FLUX_HR', 'AIR_TEMPERATURE_HR',
                'EASTWARD_WIND_HR', 'NORTHWARD_WIND_HR', 'WIND_SPEED_HR',
              ]
cl.m1_startDatetime = startdate
cl.m1_endDatetime = enddate

# Mooring 0A1
cl.oa1_base = cl.dodsBase + 'CANON/2015_May/Platforms/Moorings/OA1/'
cl.oa1_files = [
               'OA1_Canon2015_May.nc'
               ]
cl.oa1_parms = [
               'wind_dir', 'avg_wind_spd', 'atm_press', 'air_temp', 'water_temp',
               'sal', 'O2_conc', 'chl', 'pCO2_water', 'pCO2_air', 'pH',
              ]
cl.oa1_startDatetime = startdate
cl.oa1_endDatetime = enddate

# Mooring 0A2
cl.oa2_base = cl.dodsBase + 'CANON/2015_May/Platforms/Moorings/OA2/'
cl.oa2_files = [
               'OA2_Canon2015_May.nc'
               ]
cl.oa2_parms = [
               'wind_dir', 'avg_wind_spd', 'atm_press', 'air_temp', 'water_temp',

开发者ID:StevenLudwig，项目名称:stoqs，代码行数:33，代码来源:loadCANON_may2015.py

示例9:

# 需要导入模块: from CANON import CANONLoader [as 别名]
# 或者: from CANON.CANONLoader import oa1_files [as 别名]
                'OS_M1_20150729hourly_CMSTV.nc'
              ]
cl.m1_parms = [
                'eastward_sea_water_velocity_HR', 'northward_sea_water_velocity_HR',
                'SEA_WATER_SALINITY_HR', 'SEA_WATER_TEMPERATURE_HR', 'SW_FLUX_HR', 'AIR_TEMPERATURE_HR',
                'EASTWARD_WIND_HR', 'NORTHWARD_WIND_HR', 'WIND_SPEED_HR'
              ]

cl.m1_startDatetime = startdate
cl.m1_endDatetime = enddate

# Mooring 0A1
# note the new location. Location and data by deployment, instead of by campaign
cl.oa1_base = 'http://dods.mbari.org/opendap/data/oa_moorings/deployment_data/OA1/201401/'
cl.oa1_files = [
               'OA1_201401.nc'
               ]
cl.oa1_parms = [
               'wind_dir', 'avg_wind_spd', 'atm_press', 'air_temp', 'water_temp',
               'sal', 'O2_conc', 'chl', 'pCO2_water', 'pCO2_air', 'pH',
              ]
cl.oa1_startDatetime = startdate
cl.oa1_endDatetime = enddate

# Mooring 0A2
# note the new location. Location and data by deployment, instead of by campaign
cl.oa2_base = 'http://dods.mbari.org/opendap/data/oa_moorings/deployment_data/OA2/201505/'
cl.oa2_files = [
               'OA2_201505.nc'
               ]
cl.oa2_parms = [

开发者ID:devonrusconi，项目名称:stoqs，代码行数:33，代码来源:loadCANON_os2016.py

注：本文中的CANON.CANONLoader.oa1_files方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。