本文整理汇总了Python中UtilLibrary类的典型用法代码示例。如果您正苦于以下问题:Python UtilLibrary类的具体用法?Python UtilLibrary怎么用?Python UtilLibrary使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了UtilLibrary类的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Python代码示例。
示例1: addPerson
def addPerson(hostname,port,numberOfPersons):
#FOR RPC TO WORK PROPERLY THE FIRST ENTRY SHOULD BE VIA RESTCONF
if(numberOfPersons==0):
strId =str(numberOfPersons)
payload = SettingsLibrary.add_person_payload_template.substitute(personId="user"+strId,gender="unknown",age=0,
address=strId + "Way, Some Country, Some Zip "+strId,
contactNo= "some number"+strId)
# Send the POST request using RESTCONF
resp = UtilLibrary.nonprintpost(SettingsLibrary.getAddPersonUrl(hostname,port),"admin", "admin",payload)
return resp
genderToggle = "Male"
for x in range(1, numberOfPersons+1):
if(genderToggle == "Male"):
genderToggle = "Female"
else:
genderToggle = "Male"
strId = str(x)
payload = SettingsLibrary.add_person_rpc_payload_template.substitute(personId="user"+strId,gender=genderToggle,age=(20+x%100),
address=strId + "Way, Some Country, Some Zip "+str(x%1000),
contactNo= "some number"+strId)
# Send the POST request using RPC
resp = UtilLibrary.post(SettingsLibrary.getAddPersonRpcUrl(hostname,port),"admin", "admin",payload)
print("payload formed after template substitution=")
print(payload)
print("the response of the POST to add person=")
print(resp)
return resp
示例2: addCarPerson
def addCarPerson(hostname,port,numberOfCarPersons):
#FOR RPC TO WORK PROPERLY THE FIRST ENTRY SHOULD BE VIA RESTCONF
if(numberOfCarPersons==0):
payload = SettingsLibrary.add_car_person_template.substitute(Id=str(numberOfCarPersons),personId="user"+str(numberOfCarPersons))
# Send the POST request REST CONF
resp = UtilLibrary.nonprintpost(SettingsLibrary.getAddCarPersonUrl(hostname,port),"admin", "admin",payload)
return
for x in range(1, numberOfCarPersons+1):
strId = str(x)
payload = SettingsLibrary.add_car_person_template.substitute(Id=strId,personId="user"+strId)
# Send the POST request REST CONF
resp = UtilLibrary.post(SettingsLibrary.getAddCarPersonUrl(hostname,port),"admin", "admin",payload)
print("payload formed after template substitution=")
print(payload)
print("the response of the POST to add car_person=")
print(resp)
print("getting the car_persons for verification")
resp=getCarPersonMappings(hostname,port,0)
示例3: addCarPerson
def addCarPerson(hostname, port, numberOfCarPersons):
"""This method is not exposed via commands as only getCarPersons is of interest
addCarPerson entry happens when buyCar is called
<note>
To enable RPC a non-user input car-person entry is created with personId=user0
</note>
"""
# FOR RPC TO WORK PROPERLY THE FIRST ENTRY SHOULD BE VIA RESTCONF
if (numberOfCarPersons == 0):
payload = SettingsLibrary.add_car_person_template.substitute(
Id=str(numberOfCarPersons), personId="user" + str(numberOfCarPersons))
# Send the POST request REST CONF
resp = UtilLibrary.nonprintpost(SettingsLibrary.getAddCarPersonUrl(hostname, port), "admin", "admin", payload)
return resp
for x in range(1, numberOfCarPersons + 1):
strId = str(x)
payload = SettingsLibrary.add_car_person_template.substitute(Id=strId, personId="user" + strId)
# Send the POST request REST CONF
resp = UtilLibrary.post(SettingsLibrary.getAddCarPersonUrl(hostname, port), "admin", "admin", payload)
print("payload formed after template substitution=")
print(payload)
print("the response of the POST to add car_person=")
print(resp)
print("getting the car_persons for verification")
resp = getCarPersonMappings(hostname, port, 0)
# TBD detailed validation
return resp
示例4: addPerson
def addPerson(hostname, port, numberOfPersons, *expected):
"""Creates the specified number of persons based on People yang model using main RPC
<note>
To enable RPC a non-user input person entry is created with personId=user0
</note>
"""
# FOR RPC TO WORK PROPERLY THE FIRST ENTRY SHOULD BE VIA RESTCONF
if (numberOfPersons == 0):
strId = str(numberOfPersons)
payload = SettingsLibrary.add_person_payload_template.substitute(
personId="user" + strId, gender="unknown", age=0,
address=strId + "Way, Some Country, Some Zip " + strId,
contactNo="some number" + strId)
# Send the POST request using RESTCONF
resp = UtilLibrary.nonprintpost(SettingsLibrary.getAddPersonUrl(hostname, port), "admin", "admin", payload)
return resp
genderToggle = "Male"
for x in range(1, numberOfPersons + 1):
if(genderToggle == "Male"):
genderToggle = "Female"
else:
genderToggle = "Male"
strId = str(x)
payload = SettingsLibrary.add_person_rpc_payload_template.substitute(
personId="user" + strId, gender=genderToggle, age=(20 + x % 100),
address=strId + "Way, Some Country, Some Zip " + str(x % 1000),
contactNo="some number" + strId)
# Send the POST request using RPC
resp = UtilLibrary.post(SettingsLibrary.getAddPersonRpcUrl(hostname, port), "admin", "admin", payload)
print("payload formed after template substitution=")
print(payload)
print("the response of the POST to add person=")
print(resp)
if expected and str(resp.status_code) not in expected:
raise RuntimeError('Add person failed for {}:{} with status {}'.
format(hostname, port, resp.status_code))
return resp
示例5: getPersons
def getPersons(hostname, port, ignore):
"""Uses the GET on people:people resource to get all persons in the store using RESTCONF
<note>
This also returns the dummy entry created for routed RPC
with personId being user0
</note>
"""
resp = UtilLibrary.get(SettingsLibrary.getPersonsUrl(hostname, port), "admin", "admin")
resp.encoding = 'utf-8'
print(resp.text)
return resp
示例6: getClusterRoles
def getClusterRoles(shardName, numOfShards=3, numOfTries=3, sleepBetweenRetriesInSecs=1, port=8181, *ips):
"""Given a shardname (e.g. shard-inventory-config), number of shards and bunch of ips
determines what role each ip has in an Akka (Raft based) cluster
result would look like
{'10.194.126.118':'Leader', '10.194.126.118':'Follower', '10.194.126.117': None}
"""
dict = {}
for ip in ips:
i = 1
dict[ip] = None
while i <= numOfShards:
shardMemberName = "member-" + str(i) + "-" + shardName
j = 1
while j <= numOfTries:
print("Try number " + str(j))
try:
print("finding if" + ip + "is leader for shardName =" + shardMemberName)
url = SettingsLibrary.getJolokiaURL(ip, str(port), str(i), shardName)
resp = UtilLibrary.get(url)
print(resp)
if resp.status_code != 200:
sleep(sleepBetweenRetriesInSecs)
continue
print(resp.text)
data = json.loads(resp.text)
if 'value' in data:
dataValue = data['value']
print("datavalue RaftState is", dataValue['RaftState'])
if dataValue['RaftState'] == 'Follower':
dict[ip] = 'Follower'
break
elif dataValue['RaftState'] == 'Leader':
dict[ip] = 'Leader'
except:
e = sys.exc_info()[0]
print("Try" + str(j) + ":An error occurred when finding leader on" + ip +
" for shardName:" + shardMemberName)
print(e)
sleep(sleepBetweenRetriesInSecs)
continue
finally:
j = j + 1
if dict[ip] is not None:
break
i = i + 1
return dict
示例7: initCar
def initCar(hostname, port):
"""Initiales the car shard"""
x = 0
strId = str(x)
payload = SettingsLibrary.add_car_init_payload_template.substitute(
id=strId, category="category" + strId, model="model" + strId,
manufacturer="manufacturer" + strId,
year=(2000 + x % 100))
print("Initialization payload=")
print(payload)
resp = UtilLibrary.post(SettingsLibrary.getAddCarInitUrl(hostname, port), "admin", "admin", payload)
print("the response of the POST to add car=")
print(resp)
return resp
示例8: addCar
def addCar(hostname,port,numberOfCars):
for x in range(1, numberOfCars+1):
strId = str(x)
payload = SettingsLibrary.add_car_payload_template.substitute(id=strId,category="category"+strId,model="model"+strId,
manufacturer="manufacturer"+strId,
year=(2000+x%100))
print("payload formed after template substitution=")
print(payload)
# Send the POST request
resp = UtilLibrary.post(SettingsLibrary.getAddCarUrl(hostname,port),"admin", "admin",payload)
print("the response of the POST to add car=")
print(resp)
return resp
示例9: buyCar
def buyCar(hostname,port,numberOfCarBuyers):
for x in range(1, numberOfCarBuyers+1):
strId = str(x)
payload = SettingsLibrary.buy_car_rpc_template.substitute(personId="user"+strId,carId=strId)
# Send the POST request using RPC
resp = UtilLibrary.post(SettingsLibrary.getBuyCarRpcUrl(hostname,port),"admin", "admin",payload)
print("payload formed after template substitution=")
print(payload)
print("the response of the POST to buycar=")
print(resp)
print("getting the car_persons for verification")
resp=getCarPersonMappings(hostname,port,0)
示例10: addCar
def addCar(hostname, port, numberOfCars):
"""Creates the specified number of cars based on Cars yang model using RESTCONF"""
for x in range(1, numberOfCars+1):
strId = str(x)
payload = SettingsLibrary.add_car_payload_template.substitute(
id=strId, category="category" + strId, model="model" + strId,
manufacturer="manufacturer" + strId,
year=(2000 + x % 100))
print("payload formed after template substitution=")
print(payload)
# Send the POST request
resp = UtilLibrary.post(SettingsLibrary.getAddCarUrl(hostname, port), "admin", "admin", payload)
print("the response of the POST to add car=")
print(resp)
time.sleep(5) # Let the add finish
return resp
示例11: addCar
def addCar(hostname, port, numberOfCars, *expected):
"""Creates the specified number of cars based on Cars yang model using RESTCONF"""
for x in range(1, numberOfCars + 1):
strId = str(x)
payload = SettingsLibrary.add_car_payload_template.substitute(
id=strId, category="category" + strId, model="model" + strId,
manufacturer="manufacturer" + strId,
year=(2000 + x % 100))
print("payload formed after template substitution=")
print(payload)
# Send the POST request
resp = UtilLibrary.post(SettingsLibrary.getAddCarUrl(hostname, port), "admin", "admin", payload)
print("the response of the POST to add car=")
print(resp)
if expected and str(resp.status_code) not in expected:
raise RuntimeError('Add car failed for {}:{} with status {}'.
format(hostname, port, resp.status_code))
return resp
示例12: getClusterRoles
def getClusterRoles(shardName,numOfShards=3,numOfTries=3,sleepBetweenRetriesInSecs=1,port=8181,*ips):
dict={}
for ip in ips:
i=1
dict[ip]=None
bFollower = 0
while i <= numOfShards:
shardMemberName = "member-"+str(i)+"-"+shardName;
j=1
while j <= numOfTries:
print "Try number "+str(j)
try:
print "finding if"+ ip +"is leader for shardName ="+shardMemberName
url = SettingsLibrary.getJolokiaURL(ip,str(port),str(i),shardName)
resp = UtilLibrary.get(url)
print resp
if(resp.status_code != 200):
continue
data = json.loads(resp.text)
if('value' in data):
dataValue = data['value']
if(dataValue['RaftState']=='Follower'):
dict[ip]='Follower'
break;
elif(dataValue['RaftState']=='Leader'):
dict[ip]='Leader'
except:
e = sys.exc_info()[0]
print "Try"+str(j)+":An error occurred when finding leader on"+ip+" for shardName:" +shardMemberName
print e
sleep(sleepBetweenRetriesInSecs)
continue
finally:
j=j+1
if(dict[ip]!=None):
break;
i=i+1
return dict
示例13: buyCar
def buyCar(hostname, port, numberOfCarBuyers, start=0):
"""Invokes an RPC REST call that does a car purchase by a person id
<note>
It is expected that the Car and Person entries are already created
before invoking this method
</note>
"""
for x in range(start, start+numberOfCarBuyers):
strId = str(x+1)
payload = SettingsLibrary.buy_car_rpc_template.substitute(personId="user" + strId, carId=strId)
# Send the POST request using RPC
resp = UtilLibrary.post(SettingsLibrary.getBuyCarRpcUrl(hostname, port), "admin", "admin", payload)
print(resp)
print(resp.text)
if (resp.status_code != 204):
return False
return True
示例14: deleteAllCarsPersons
def deleteAllCarsPersons(hostname,port,ignore):
UtilLibrary.delete(SettingsLibrary.getCarPersonsUrl(hostname,port),"admin","admin")
resp = getPersons(hostname,port,ignore)
print("Persons in store after deletion:"+ str(resp))
示例15: getCarPersonMappings
def getCarPersonMappings(hostname,port,ignore):
resp = UtilLibrary.get(SettingsLibrary.getCarPersonUrl(hostname,port),"admin","admin")
resp.encoding = 'utf-8'
print (resp)
return resp