当前位置: 首页>>代码示例>>Python>>正文

Python MOD.play_stream方法代码示例

本文整理汇总了Python中MOD.play_stream方法的典型用法代码示例。如果您正苦于以下问题：Python MOD.play_stream方法的具体用法？Python MOD.play_stream怎么用？Python MOD.play_stream使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类MOD的用法示例。


在下文中一共展示了MOD.play_stream方法的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Python代码示例。

示例1: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "Gallery"
    ScriptName = "stress"
    ScriptIndex = "7"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

    # macros
    searching_from_wizard_general_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_E501 = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_E501 = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_ALL = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 5000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "down 1 1000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    load_regions_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_E501 = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]
    load_regions_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_ALL = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]

############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    UART.start_app("")
    RC.push(["key_1", "key_2", "key_3"])    # set of the RC buttons
    sleep(0)
    RC.push("[macros_name]")    # RC macros from remote_control.ini file
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("active")
    UART.default_settings()
    UART.start_app("")
    RC.push([""])
    sleep(0)
    GRAB.compare(testcase)
###################################################################################
    status("active")
    MOD.stop(Modulator)
    GRAB.stop_capture()
开发者ID:yupasik，项目名称:AT，代码行数:59，代码来源:stress.py

示例2: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "Settings"
    ScriptName = "08-blocking"
    ScriptIndex = "8"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

    # macros
    searching_from_wizard_general_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_E501 = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_E501 = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_ALL = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 5000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "down 1 1000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    load_regions_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_E501 = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]
    load_regions_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_ALL = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]

############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    if platform in ["E501", "E502", "A230"]:
        RC.push(searching_from_wizard_general_E501)
    else:
        RC.push(searching_from_wizard_general_ALL)
    UART.start_app("settings")
    RC.push(["right 6 3000"])
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("active")
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3
    status("active")
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4
    status("active")
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5
    status("active")
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    status("active")
    RC.push(["down", "ok 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 7 ##########################################
    testcase = 7
    status("active")
    RC.push(["1 8 2000", "ok 1 3000", "up 1 2000", "right", "left", "down 1 2000", "ok 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 8 ##########################################
    testcase = 8
    status("active")
    RC.push(["1 8 2000", "ok 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 9 ##########################################
    testcase = 9
    status("active")
    GRAB.compare(testcase)
############################ TestCase 10 ##########################################
    testcase = 10
    status("active")
    GRAB.compare(testcase)
############################ TestCase 11 ##########################################
    testcase = 11
    status("active")
    GRAB.compare(testcase)
############################ TestCase 12 ##########################################
    testcase = 12
    status("active")
    GRAB.compare(testcase)
############################ TestCase 13 ##########################################
    testcase = 13
    status("active")
    GRAB.compare(testcase)
############################ TestCase 14 ##########################################
    testcase = 14
#.........这里部分代码省略.........
开发者ID:yupasik，项目名称:AT，代码行数:103，代码来源:08-blocking.py

示例3: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "Helper"
    ScriptName = "functionality"
    ScriptIndex = "1"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Stream2 = "\\DRE Services\\X_0000_00000_MUX_38000_DRE4_Infocas_1.ts"
    Stream3 = "\\DRE Services\\X_0000_00000_MUX_38000_DRE4_TVMail_1.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

    # macros
    searching_from_wizard_general_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_E501 = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_E501 = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_ALL = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 5000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "down 1 1000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    load_regions_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_E501 = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]
    load_regions_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_ALL = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]

    """############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    UART.start_app("")
    RC.push(["key_1", "key_2", "key_3"])    # set of the RC buttons
    sleep(0)
    RC.push("[macros_name]")    # RC macros from remote_control.ini file
    GRAB.compare(testcase)"""
############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.stop(Modulator)
    UART.default_settings()
    RC.push(["exit 1 1000"])
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("active")
    UART.default_settings()
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    RC.push(["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000"])
    if platform == "E212":
        RC.push(["left 1 1000", "ok 1 1000"])
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3 # Terrestrial search
    status("inactive")
    UART.default_settings
    RC.push([""])
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4 # Siberia
    status("inactive")
    RC.push([""])
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5 # Siberia
    status("inactive")
    RC.push([""])
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    status("active")
    UART.default_settings()
    RC.push(["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000"])
    if platform == "E212":
        RC.push(["left 1 1000", "ok 1 1000"])
    RC.push(["standby 1 10000", "standby 1 15000"])
    GRAB.compare(testcase)
############################ TestCase 7 ##########################################
    testcase = 7
    status("active")
    UART.default_settings()
    RC.push(["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000"])
    if platform == "E212":
        RC.push(["left 1 1000", "ok 1 1000"])
    UART.reboot()
    GRAB.compare(testcase)
############################ TestCase 8 ##########################################
    testcase = 8
    status("active")
#.........这里部分代码省略.........
开发者ID:yupasik，项目名称:AT，代码行数:103，代码来源:functionality.py

示例4: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "Settings"
    ScriptName = "12-scripts"
    ScriptIndex = "12"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

    # macros
    searching_from_wizard_general_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_E501 = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_E501 = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_ALL = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 5000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "down 1 1000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    load_regions_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_E501 = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]
    load_regions_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_ALL = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]

############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)k
    UART.default_settings()
    if platform in ["E501", "E502", "A230"]:
        RC.push(searching_from_wizard_general_E501)
    else:
        RC.push(searching_from_wizard_general_ALL)
    UART.start_app("settings")
    RC.push(["cinemahalls"])
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("active")
    RC.push(["help"])
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3
    status("active")
    MOD.stop(Modulation)
    MOD.play(Modulation)
    UART.start_app("scheduler")
    RC.push(["red", "ok 1 2400", "down 4 1000", "ok", "ok", "right 1 1000", "up 2 1000", "ok", "ok", "exit 5 2400"])
    UART.start_app("settings")
    sleep(80)
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4
    status("manual")
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5
    status("manual")
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    status("manual")
    GRAB.compare(testcase)
############################ TestCase 7 ##########################################
    testcase = 7
    status("manual")
    GRAB.compare(testcase)
############################ TestCase 8 ##########################################
    testcase = 8
    status("active")
    RC.push(["VolUp 1 2400"])
    GRAB.compare(testcase)
############################ TestCase 9 ##########################################
    testcase = 9
    status("active")
    RC.push(["VolDown 1 2400"])
    GRAB.compare(testcase)
############################ TestCase 10 ##########################################
    testcase = 10
    status("active")
    RC.push(["mute"])
    GRAB.compare(testcase)
############################ TestCase 11 ##########################################
    testcase = 11
    status("active")
    RC.push(["guide"])
    GRAB.compare(testcase)
############################ TestCase 12 ##########################################
    testcase = 12
#.........这里部分代码省略.........
开发者ID:yupasik，项目名称:AT，代码行数:103，代码来源:12-scripts.py

示例5: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "KidProfile_2"
    ScriptName = "editing_cases"
    ScriptIndex = "1"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream2 = "\\Kid Profile\\X_0000_00000_MUX_38000_kidsprofile-test_12226_20130905a.ts"
    Stream = "\\Kid Profile\\X_0000_00000_MUX_38000_KidProfile_Auto_20140905a.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

    # macros
    searching_from_wizard_general_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_E501 = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_E501 = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_ALL = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "down 1 1000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    load_regions_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_E501 = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]
    load_regions_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_ALL = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]

############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    UART.default_settings()
    MOD.stop(Modulator)
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    OPER.search()
    RC.push(["exit 1 1000", "exit 1 1000"])
    
    #-----Activating KID Profile-----#
    #UART.activate_app("kidsmode")
    #UART.start_app("settings")
    #sleep(5)
    #RC.push(["right 1 1500", "right 1 1500", "right 1 1500", "right 1 1500", "right 1 1500", "right 1 1500", "right 1 1500", "OK 1 1500", "down 1 1500", "4 1 1500", "3 1 500", "2 1 500", "1 1 500", "1 1 500", "1 1 500", "1 1 500", "1 1 500", "1 1 500", "1 1 500", "1 1 1500", "1 1 1500", "1 1 1500", "1 1 1500", "1 1 1500", "1 1 1500", "1 1 1500", "1 1 1500", "1 1 5500", "exit 1 1500", "exit 1 1500", "exit 1 1500", "exit 1 1500"])
    sleep(3)
    RC.push(["kid_1 1 10500", "exit 1 1500", "left 1 1000", "OK 1 7000"])
    UART.start_app("channelseditor")
    RC.push(["up 1 1000", "up 1 10000", "right 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("active")
    RC.push(["OK 1 1000"])
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3
    status("active")
    RC.push(["exit 1 1000", "up 1 1000", "up 1 1000"])
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4
    status("active")
    RC.push(["down 1 1000", "down 1 1000", "down 1 1000"])
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5
    status("active")
    RC.push(["ChUp 1 1000"])
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    status("active")
    RC.push(["ChDown 1 1000"])
    GRAB.compare(testcase)
############################ TestCase 7 ##########################################
    testcase = 7
    status("active")
    RC.push(["right 1 1000"])
    GRAB.compare(testcase)
############################ TestCase 8 ##########################################
    testcase = 8
    status("active")
    RC.push(["left 1 1000"])
    GRAB.compare(testcase)
############################ TestCase 9 ##########################################
    testcase = 9
    status("active")
    RC.push(["right 1 1000", "green 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 10 ##########################################
    testcase = 10
    status("active")
    RC.push(["exit 1 1000", "yellow 1 1000"])
    GRAB.compare(testcase)
#.........这里部分代码省略.........
开发者ID:yupasik，项目名称:AT，代码行数:103，代码来源:editing_cases.py

示例6: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "ManualSearch"
    ScriptName = "conflicts"
    ScriptIndex = "3"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

    # macros
    searching_from_wizard_general_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_E501 = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_E501 = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_ALL = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 5000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "down 1 1000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    load_regions_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_E501 = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]
    load_regions_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_ALL = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]

############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    if platform in ["E501", "E502", "A230"]:
        RC.push(searching_from_wizard_general_E501)
    else:
        RC.push(searching_from_wizard_general_ALL)
    MOD.stop(Modulator)
    MOD.play(Modulator)
    UART.start_app("scheduler")
    RC.push(["red", "ok 1 2400", "down 2 1000", "ok 1 2000", "ok 1 2000", "right 1 1000", "up 2 1000", "ok 1 2000", "ok 1 2000", "exit 5 2400", "1 1 2400"])
    UART.start_app("dvbsmanualscanner")
    sleep(120)
    RC.push(["exit 2 3000", "red 1 2500"])
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("manual")
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3
    status("manual")
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4
    status("manual")
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5
    status("manual")
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    RC.push(["exit 2 2400"])
    UART.activate_app("dvbsmanualscanner")
    UART.start_app("dvbsmanualscanner")
    RC.push(["cinemahalls"])
    GRAB.compare(testcase)
############################ TestCase 7 ##########################################
    testcase = 7
    status("active")
    RC.push(["mail"])
    GRAB.compare(testcase)
############################ TestCase 8 ##########################################
    testcase = 8
    status("active")
    RC.push(["red"])
    GRAB.compare(testcase)
############################ TestCase 9 ##########################################
    testcase = 9
    status("active")
    RC.push(["blue"])
    GRAB.compare(testcase)
############################ TestCase 10 ##########################################
    testcase = 10
    status("active")
    RC.push(["yellow"])
    GRAB.compare(testcase)
############################ TestCase 11 ##########################################
    testcase = 11
#.........这里部分代码省略.........
开发者ID:yupasik，项目名称:AT，代码行数:103，代码来源:conflicts.py

示例7: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "Settings"
    ScriptName = "01-navigation"
    ScriptIndex = "1"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

    # macros
    searching_from_wizard_general_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_E501 = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_E501 = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_ALL = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 5000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "down 1 1000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    load_regions_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_E501 = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]
    load_regions_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_ALL = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]

    """############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    UART.start_app("")
    RC.push(["key_1", "key_2", "key_3"])    # set of the RC buttons
    sleep(0)
    RC.push("[macros_name]")    # RC macros from remote_control.ini file
    GRAB.compare(testcase)"""
############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    UART.default_settings()
    MOD.stop(Modulator)
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    OPER.search()
    UART.start_app("settings")
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("active")
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3
    status("active")
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4
    status("active")
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5
    status("active")
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    status("active")
    RC.push(["exit 1 1000", "exit 1 1000", "menu 1 2000"])
    GRAB.compare(testcase)
############################ TestCase 7 ##########################################
    testcase = 7
    status("active")
    RC.push(["exit 1 1000", "exit 1 1000", "menu 1 1000", "left 1 1000", "OK 1 1000", "exit 1 1000"])
    GRAB.compare(testcase)
############################ TestCase 8 ##########################################
    testcase = 8
    status("manual")
    GRAB.compare(testcase)
############################ TestCase 9 ##########################################
    testcase = 9
    status("active")
    UART.start_app("settings")
    RC.push(["menu 1 1000"])
    GRAB.compare(testcase)
############################ TestCase 10 ##########################################
    testcase = 10
    status("active")
    UART.start_app("settings")
    RC.push(["last 1 1000"])
    GRAB.compare(testcase)
############################ TestCase 11 ##########################################
    testcase = 11
    status("active")
    UART.start_app("settings")
#.........这里部分代码省略.........
开发者ID:yupasik，项目名称:AT，代码行数:103，代码来源:01-navigation.py

示例8: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "Gallery"
    ScriptName = "empty_flash"
    ScriptIndex = "2"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

    # macros
    searching_from_wizard_general_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_E501 = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_E501 = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_ALL = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 5000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "down 1 1000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    load_regions_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_E501 = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]
    load_regions_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_ALL = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]

############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    if platform in ["E501", "E502", "A230"]:
        RC.push(searching_from_wizard_general_E501)
    else:
        RC.push(searching_from_wizard_general_ALL)
    UART.start_app("photos")
    sleep(60)
    RC.push(["down 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("active")
    RC.push(["ok 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3
    status("active")
    RC.push(["exit 1 3000", "menu 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4
    status("active")
    UART.start_app("photos")
    RC.push(["down 1 3000", "last 1 2500"])
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5
    status("active")
    UART.start_app("photos")
    RC.push(["down 1 3000", "exit 1 2500"])
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    status("active")
    UART.start_app("photos")
    RC.push(["down 1 3000", "standby 1 5000", "standby 1 10000"])
    GRAB.compare(testcase)
############################ TestCase 7 ##########################################
    testcase = 7
    status("active")
    UART.start_app("photos")
    RC.push(["down 1 3000", "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "clock", "stb", "www", "id", "format", "tv/radio", "guide", "red", "green", "blue", "yellow", "cinemahalls", "rec", "reclist", "forward", "backward", "play", "stop", "mute", "VolUp", "VolDown 1 2500"])
    GRAB.compare(testcase)
############################ TestCase 8 ##########################################
    testcase = 8
    status("active")
    RC.push(["exit 3 3500"])
    UART.start_app("photos")
    RC.push(["down 1 2000", "ok 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 9 ##########################################
    testcase = 9
    status("active")
    RC.push(["right 1 3000", "left 2 3000"])
    GRAB.compare(testcase)
############################ TestCase 10 ##########################################
    testcase = 10
    status("active")
    RC.push(["exit 1 2000", "ok 1 3000", "right 3 3000"])
    GRAB.compare(testcase)
############################ TestCase 11 ##########################################
#.........这里部分代码省略.........
开发者ID:yupasik，项目名称:AT，代码行数:103，代码来源:empty_flash.py

示例9: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "ManualSearch"
    ScriptName = "manual_search"
    ScriptIndex = "1"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    RC.push(["exit 2 2400"])
    UART.activate_app("dvbsmanualscanner")
    UART.start_app("dvbsmanualscanner")
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("active")
    RC.push(["menu 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3
    status("manual")
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4
    status("manual")
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5
    status("manual")
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    status("active")
    UART.start_app("dvbsmanualscanner")
    RC.push(["standby 1 5000", "standby 1 20000"])
    GRAB.compare(testcase)
############################ TestCase 7 ##########################################
    testcase = 7
    status("active")
    RC.push(["exit 1 3000"])
    UART.start_app("dvbsmanualscanner")
    RC.push(["VolUp 1 2400"])
    GRAB.compare(testcase)
############################ TestCase 8 ##########################################
    testcase = 8
    status("active")
    RC.push(["VolDown 1 2400"])
    GRAB.compare(testcase)
############################ TestCase 9 ##########################################
    testcase = 9
    status("active")
    RC.push(["mute 1 2400"])
    GRAB.compare(testcase)
############################ TestCase 10 ##########################################
    testcase = 10
    status("active")
    RC.push(["last 1 2400"])
    GRAB.compare(testcase)
############################ TestCase 11 ##########################################
    testcase = 11
    status("active")
    UART.start_app("dvbsmanualscanner")
    RC.push(["up 1 2400"])
    GRAB.compare(testcase)
############################ TestCase 12 ##########################################
    testcase = 12
    status("active")
    RC.push(["down 1 2400"])
    GRAB.compare(testcase)
############################ TestCase 13 ##########################################
    testcase = 13
    status("active")
    RC.push(["down 4 2400", "right 1 2400"])
    GRAB.compare(testcase)
############################ TestCase 183 ##########################################
    testcase = 183
    status("active")
    RC.push(["left 1 2400", "up 2 2000", "right 1 2400"])
    GRAB.compare(testcase)
############################ TestCase 184 ##########################################
    testcase = 184
    status("active")
    RC.push(["left 1 2400", "up 1 2000", "right 1 2400"])
    GRAB.compare(testcase)
############################ TestCase 14 ##########################################
#.........这里部分代码省略.........
开发者ID:yupasik，项目名称:AT，代码行数:103，代码来源:manual_search.py

示例10: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "Menu_on_OK_2"
    ScriptName = "main"
    ScriptIndex = "1"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\036E_20000_LCN-25_20140418a.ts"
    Stream_2 = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Frequency = 1476
    Modulator = "1"
    Modulator_2 = "2"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)
    MOD.stop(Modulator_2)

    # macros
    searching_from_wizard_E501 = ["ok 1 2400", "ok 1 2400", "ok 1 2400", "right 1 2400", "ok 1 2400", "ok 1 45000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_ALL = ["ok 1 2400", "ok 1 2400", "right 1 2400", "ok 1 2400", "ok 1 45000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]

############################ TestCase 1 ##########################################
    """testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    OPER.search()
    RC.push(["ok 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("active")
    MOD.stop(Modulator)
    UART.default_settings()
    RC.push(["exit 2 2400", "ok 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    OPER.search()
    RC.push(["up 2 5000", "ok 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    OPER.search()
    RC.push(["tv/radio 1 5000", "ok 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5
    status("active")
    UART.default_settings()
    OPER.search()
    OPER.fav_create("123")
    RC.push(["blue 1 3000", "left 1 3000", "down 20 5000", "ok 2 5000", "exit 1 3000", "ok 1 5000"])
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    status("active")
    UART.default_settings()
    OPER.search()
    RC.push(["blue 1 3000", "left 1 3000", "down 3 5000", "ok 2 5000", "exit 1 3000", "ok 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 95 ##########################################
    testcase = 95
    status("inactive")
    #UART.default_settings()
    #if platform in ["E501", "E502", "A230"]:
    #    RC.push(searching_from_wizard_E501)
    #else:
    #    RC.push(searching_from_wizard_ALL)
    #GRAB.compare(testcase)
############################ TestCase 7 ##########################################
    testcase = 7
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream_2, Frequency, Modulator)
    UART.default_settings()
    OPER.search()
    RC.push(["ok 1 3000", "down 2 3000"])
    GRAB.compare(testcase)
############################ TestCase 8 ##########################################
    testcase = 8
    status("active")
    RC.push(["exit 1 1000"])
    OPER.fav_create("123")
    RC.push(["ok 1 3000", "down 2 3000"])
    GRAB.compare(testcase)
############################ TestCase 9 ##########################################
    testcase = 9
    status("active")
    GRAB.compare(testcase)
#.........这里部分代码省略.........
开发者ID:yupasik，项目名称:AT，代码行数:103，代码来源:main.py

示例11: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "Settings"
    ScriptName = "10-stb"
    ScriptIndex = "10"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

    # macros
    searching_from_wizard_general_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_E501 = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_E501 = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_ALL = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 5000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "down 1 1000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    load_regions_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_E501 = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]
    load_regions_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_ALL = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]

############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    if platform in ["E501", "E502", "A230"]:
        RC.push(searching_from_wizard_general_E501)
    else:
        RC.push(searching_from_wizard_general_ALL)
    UART.start_app("settings")
    RC.push(["right 8 3000"])
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    if platform in ["E501", "E502", "A230"]:
        status("active")
    else:
        status("inactive")
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3
    status("active")
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4
    status("active")
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5
    if platform in ["E501", "E502", "A230"]:
        status("active")
    else:
        status("inactive")
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    if platform in ["E501", "E502", "A230"]:
        status("active")
    else:
        status("inactive")
    GRAB.compare(testcase)
############################ TestCase 7 ##########################################
    testcase = 7
    if platform in ["E501", "E502", "A230"]:
        status("active")
    else:
        status("inactive")
    GRAB.compare(testcase)
############################ TestCase 8 ##########################################
    testcase = 8
    if platform in ["E501", "E502", "A230"]:
        status("active")
    else:
        status("inactive")
    GRAB.compare(testcase)
############################ TestCase 9 ##########################################
    testcase = 9
    if platform in ["E501", "E502", "A230"]:
        status("active")
    else:
        status("inactive")
    GRAB.compare(testcase)
############################ TestCase 10 ##########################################
    testcase = 10
    if platform in ["E501", "E502", "A230"]:
#.........这里部分代码省略.........
开发者ID:yupasik，项目名称:AT，代码行数:103，代码来源:10-stb.py

示例12: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "Gallery"
    ScriptName = "test_flash"
    ScriptIndex = "3"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

    # macros
    searching_from_wizard_general_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_E501 = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_E501 = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_ALL = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 5000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "down 1 1000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    load_regions_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_E501 = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]
    load_regions_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_ALL = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]

############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    if platform in ["E501", "E502", "A230"]:
        RC.push(searching_from_wizard_general_E501)
    else:
        RC.push(searching_from_wizard_general_ALL)
    UART.start_app("photos")
    sleep(60)
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("active")
    RC.push(["left 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3
    status("active")
    RC.push(["right 1 5000"])
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4
    status("active")
    RC.push(["left 1 3000", "up 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5
    status("active")
    RC.push(["down 1 3000", "down 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    status("active")
    RC.push(["up 1 3000", "ok 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 7 ##########################################
    testcase = 7
    status("active")
    RC.push(["exit 1 3000", "menu 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 8 ##########################################
    testcase = 8
    status("active")
    UART.start_app("photos")
    RC.push(["last 1 2500"])
    GRAB.compare(testcase)
############################ TestCase 9 ##########################################
    testcase = 9
    status("active")
    UART.start_app("photos")
    RC.push(["exit 1 2500"])
    GRAB.compare(testcase)
############################ TestCase 10 ##########################################
    testcase = 10
    status("active")
    UART.start_app("photos")
    RC.push(["standby 1 5000", "standby 1 10000"])
    GRAB.compare(testcase)
############################ TestCase 11 ##########################################
    testcase = 11
    status("active")
    UART.start_app("photos")
    RC.push(["ok", "right", "left 1 3000"])
#.........这里部分代码省略.........
开发者ID:yupasik，项目名称:AT，代码行数:103，代码来源:test_flash.py

示例13: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "EPG"
    ScriptName = "genres"
    ScriptIndex = "1"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

    # macros
    searching_from_wizard_general_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 45000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 45000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 45000", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_E501 = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 45000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 45000", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 45000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 45000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 45000", "down", "ok 1 5000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 45000", "down 1 1000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 45000", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    load_regions_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 45000"]
    load_regions_english_E501 = ["up 3 2400", "right 1 1000", "down 3 2400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 45000"]
    load_regions_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 45000"]
    load_regions_english_ALL = ["up 3 2400", "right 1 1000", "down 3 2400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 45000"]

    """############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    UART.start_app("")
    RC.push(["key_1", "key_2", "key_3"])    # set of the RC buttons
    sleep(0)
    RC.push("[macros_name]")    # RC macros from remote_control.ini file
    GRAB.compare(testcase)"""
############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    UART.default_settings()
#    RC.push(["exit 1 500", "exit 1 500", "exit 1 500", "menu 1 1000", "left 1 1000", "left 1 1000", "ok 1 1000", "right 1 1000", "right 1 1000", "right 1 1000", "right 1 1000", "right 1 1000", "right 1 1000", "right 1 1000", "right 1 1000", "down 1 1500",  "ok 1 1500", "left 1 1000", "ok 1 1000"])
    sleep(15)
    MOD.stop(Modulator)
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    if platform in ["E501", "E502", "A230"]:
        RC.push(["ok 1 2000", "ok 1 2000", "ok 1 2000", "right 1 2000", "ok 1 2000", "ok 1 60000", "ok 1 15000", "ok 1 5000", "ok 1 10000", "exit 2 2000"])
    else:
        RC.push(["ok 1 2000", "ok 1 2000", "right 1 2000", "ok 1 2000", "ok 1 15000", "ok 1 60000", "ok 1 5000", "exit 2 2000"])
    sleep(3)
    RC.push(["0 1 3500", "guide 1 5000", "exit 1 20000", "guide 1 3000", "down 1 2000", "right 1 2000", "right 1 2000", "down 1 2000", "left 1 2000", "ok 1 2000"])
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("active")
    RC.push(["ok 1 1500", "down 1 1500", "ok 1 1500"])
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3
    status("active")
    RC.push(["ok 1 1000", "down 1 1000", "ok 1 1500"])
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4
    status("active")
    RC.push(["ok 1 1000", "down 1 1000", "ok 1 1500"])
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5
    status("active")
    RC.push(["ok 1 1000", "down 1 1000", "ok 1 1500"])
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    status("active")
    RC.push(["ok 1 1000", "down 1 1000", "ok 1 1500"])
    GRAB.compare(testcase)
############################ TestCase 7 ##########################################
    testcase = 7
    status("active")
    RC.push(["ok 1 1000", "down 1 1000", "ok 1 1500"])
    GRAB.compare(testcase)
############################ TestCase 8 ##########################################
    testcase = 8
    status("active")
    RC.push(["ok 1 1000", "down 1 1000", "ok 1 1500"])
    GRAB.compare(testcase)
############################ TestCase 9 ##########################################
    testcase = 9
    status("active")
    RC.push(["ok 1 1000", "down 1 1000", "ok 1 1500"])
    GRAB.compare(testcase)
#.........这里部分代码省略.........
开发者ID:yupasik，项目名称:AT，代码行数:103，代码来源:genres.py

示例14: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "Helper"
    ScriptName = "content"
    ScriptIndex = "2"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

    # macros
    searching_from_wizard_general_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_E501 = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_E501 = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_ALL = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 5000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "down 1 1000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    load_regions_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_E501 = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]
    load_regions_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_ALL = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]

    """############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    UART.start_app("")
    RC.push(["key_1", "key_2", "key_3"])    # set of the RC buttons
    sleep(0)
    RC.push("[macros_name]")    # RC macros from remote_control.ini file
    GRAB.compare(testcase)"""
############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.stop(Modulator)
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    RC.push(["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000"])
    if platform == "E212":
        RC.push(["left 1 1000", "ok 1 1000"])
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("active")
    RC.push(["right 1 1000", "OK 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3
    status("active")
    RC.push(["OK 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4
    status("active")
    RC.push(["OK 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5
    status("active")
    RC.push(["OK 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    status("active")
    RC.push(["OK 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 7 ##########################################
    testcase = 7
    status("active")
    RC.push(["OK 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 8 ##########################################
    testcase = 8
    status("active")
    RC.push(["OK 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 9 ##########################################
    testcase = 9
    status("active")
    RC.push(["OK 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 10 ##########################################
    testcase = 10
    status("active")
    RC.push(["OK 1 3000"])
    GRAB.compare(testcase)
#.........这里部分代码省略.........
开发者ID:yupasik，项目名称:AT，代码行数:103，代码来源:content.py

示例15: runTest

# 需要导入模块: import MOD [as 别名]
# 或者: from MOD import play_stream [as 别名]
def runTest():
    status("active")
    TestName = "Settings"
    ScriptName = "11-Antenna"
    ScriptIndex = "11"
    Grabber = DO.grab_define()
    platform = DO.load_platform()
    Modulation = "DVBS"
    FEC = "3/4"
    SR = "27500000"
    Stream = "\\X_0000_00000_MUX_32000_EPG_Software_20130328a.ts"
    Frequency = 1476
    Modulator = "1"
    COM = "COM7"
    settings = [ScriptName, ScriptIndex, Grabber, Modulation, FEC, SR, Stream, Frequency, Modulator, COM]
    DO.save_settings(settings)
    GRAB.start_capture()
    MOD.stop(Modulator)

    # macros
    searching_from_wizard_general_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_E501 = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_E501 = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_general_english_ALL = ["up 2 3400", "right 1 1000", "down 2 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "ok 1 5000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_centre_english_ALL = ["up 3 3400", "right 1 1000", "down 3 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200", "down 1 1000", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    searching_from_wizard_south_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200", "down", "down", "ok 1 15000", "ok 1 10000", "exit 2 3000"]
    load_regions_E501 = ["ok 1 3400", "ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_E501 = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]
    load_regions_ALL = ["ok 1 3400", "ok 1 3400", "right 1 3400", "ok 1 3400", "ok 1 22200"]
    load_regions_english_ALL = ["up 2 2400", "right 1 1000", "down 2 2400", "ok 1 3400", "ok 1 3400", "right", "ok 1 3400", "ok 1 22200"]

############################ TestCase 1 ##########################################
    testcase = 1
    status("active")
    MOD.play_stream(Modulation, FEC, SR, Stream, Frequency, Modulator)
    UART.default_settings()
    if platform in ["E501", "E502", "A230"]:
        RC.push(searching_from_wizard_general_E501)
    else:
        RC.push(searching_from_wizard_general_ALL)
    UART.start_app("settings")
    RC.push(["right 9 3000"])
    GRAB.compare(testcase)
############################ TestCase 2 ##########################################
    testcase = 2
    status("active")
    GRAB.compare(testcase)
############################ TestCase 3 ##########################################
    testcase = 3
    status("active")
    GRAB.compare(testcase)
############################ TestCase 4 ##########################################
    testcase = 4
    status("active")
    RC.push(["down", "right 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 5 ##########################################
    testcase = 5
    status("active")
    RC.push(["left 1 3000"])
    GRAB.compare(testcase)
############################ TestCase 6 ##########################################
    testcase = 6
    status("active")
    RC.push(["ok 1 3000"])
    GRAB.compare(testcase)
###################################################################################
    status("active")
    MOD.stop(Modulator)
    GRAB.stop_capture()
开发者ID:yupasik，项目名称:AT，代码行数:76，代码来源:11-Antenna.py


注：本文中的MOD.play_stream方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。