Python socket.INADDR_ANY属性代码示例

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def _create_ipv4_sockets(loopback_enabled):
    # Open a multicast send socket, with IP_MULTICAST_LOOP enabled or disabled as requested.
    mcast_address = "224.0.1.195"
    port = 49501
    group = (mcast_address, port)
    txsock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
    txsock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
    if loopback_enabled:
        txsock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_LOOP, 1)
    else:
        txsock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_LOOP, 0)
    txsock.connect(group)
    # Open a multicast receive socket and join the group
    rxsock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
    req = struct.pack("=4sl", socket.inet_aton(mcast_address), socket.INADDR_ANY)
    rxsock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, req)
    rxsock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
    rxsock.bind(group)
    return (txsock, rxsock) 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def receive(*, group=DEFAULT_GROUP, port=DEFAULT_PORT, timeout=None):
    s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
    try:
        s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
        try:
            s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEPORT, 1)
        except AttributeError:
            # not available on Windows
            pass
        s.bind(('', port))

        s.settimeout(timeout)

        mreq = struct.pack('4sl', socket.inet_aton(group), socket.INADDR_ANY)
        s.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, mreq)
        try:
            data, sender_addr = s.recvfrom(4096)
        finally:
            s.setsockopt(socket.IPPROTO_IP, socket.IP_DROP_MEMBERSHIP, mreq)
    finally:
        s.close()
    return data, sender_addr 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def __init__(self, summary_table, group=DEFAULT_GROUP, port=DEFAULT_PORT, timeout=None):
        self._dummy_socket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
        self._socket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
        try:
            self._socket.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
            try:
                self._socket.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEPORT, 1)
            except AttributeError:
                # not available on Windows
                pass
            self._socket.bind(('', port))

            self._socket.settimeout(timeout)

            self._mreq = struct.pack('4sl', socket.inet_aton(group), socket.INADDR_ANY)
            self._socket.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, self._mreq)
        except Exception:
            self._dummy_socket.close()
            self._socket.close()
            raise
        self._is_shutdown = False
        self._summary_table = summary_table
        self._group = group
        self._port = port 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def check_udp_connectivity(url, timeout=None):
    """Check UDP connectivity."""
    ipaddr, port = url.rsplit(':', 1)
    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
    sock.settimeout(timeout)
    sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
    sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEPORT, 1)
    sock.bind(('', int(port)))
    mreq = struct.pack("4sl", socket.inet_aton(ipaddr), socket.INADDR_ANY)
    sock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, mreq)
    try:
        if sock.recv(10240):
            return True
    except socket.timeout:
        pass
    return False 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def _create_mcast_socket(self):
        sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
        sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)

        if self._interface != 'any':
            if platform.system() != "Windows":
                sock.bind((self.MULTICAST_ADDRESS, self.MULTICAST_PORT))
            else:
                sock.bind((self._interface, self.MULTICAST_PORT))

            mreq = socket.inet_aton(self.MULTICAST_ADDRESS) + socket.inet_aton(self._interface)
        else:
            if platform.system() != "Windows":
                sock.bind((self.MULTICAST_ADDRESS, self.MULTICAST_PORT))
            else:
                sock.bind(('', self.MULTICAST_PORT))
            mreq = struct.pack("=4sl", socket.inet_aton(self.MULTICAST_ADDRESS), socket.INADDR_ANY)

        sock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, mreq)
        return sock 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def _init_socket(self):
        sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM,
                             socket.IPPROTO_UDP)
        sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
        sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, 10)
        sock.bind((self._root.bind_ip, COAP_PORT))
        if self._root.host_ip:
            mreq = struct.pack("=4s4s",
                               socket.inet_aton(COAP_IP),
                               socket.inet_aton(self._root.host_ip))
        else:
            mreq = struct.pack("=4sl",
                               socket.inet_aton(COAP_IP),
                               socket.INADDR_ANY)
        sock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, mreq)
        sock.settimeout(15)
        self._socket = sock 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def __init__(self, group="239.255.255.250", port=1900):
        self.group, self.port = group, port
        self.callbacks = {}
        # multicast socket
        sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
        sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
        logger.debug("[SSDP] bind: 0.0.0.0:%s" % port)
        sock.bind(('0.0.0.0', port))
        mreq = struct.pack("=4sl", socket.inet_aton(group), socket.INADDR_ANY)
        logger.debug("[SSDP] add membership: UDP/%s" % group)
        sock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, mreq)
        self.listening = False
        self.sock = sock
        self.devices = {}

    # Start listening 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def handle_membership(self, cmd):
        if self._listen_interfaces is None:
            mreq = struct.pack(
                str("4sI"), socket.inet_aton(self._multicast_address[0]),
                socket.INADDR_ANY)
            self.socket.setsockopt(socket.IPPROTO_IP,
                                   cmd, mreq)
        else:
            for interface in self._listen_interfaces:
                try:
                    if_addr = socket.inet_aton(interface)
                except socket.error:
                    if_addr = get_interface_address(interface)
                mreq = socket.inet_aton(self._multicast_address[0]) + if_addr
                self.socket.setsockopt(socket.IPPROTO_IP,
                                       cmd, mreq) 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def create_sockets(mcst_ipaddr, mcst_port):
        mreq = struct.pack("4sl", socket.inet_aton(mcst_ipaddr),
                           socket.INADDR_ANY)

        s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM,
                          socket.IPPROTO_UDP)
        s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
        s.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, mreq)

        if platform.system() == "Windows":
            s.bind(("", mcst_port))
            return (s, )

        else:
            s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEPORT, 1)
            s.bind((mcst_ipaddr, mcst_port))

            bsock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM,
                                  socket.IPPROTO_UDP)
            bsock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
            bsock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEPORT, 1)
            bsock.bind(("", 1901))

            return (s, bsock) 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def init_socket(self):
        ok = True
        self.ip = '239.255.255.250'
        self.port = 1900
        try:
            #This is needed to join a multicast group
            self.mreq = struct.pack("4sl",socket.inet_aton(self.ip),socket.INADDR_ANY)

            #Set up server socket
            self.ssock = socket.socket(socket.AF_INET,socket.SOCK_DGRAM,socket.IPPROTO_UDP)
            self.ssock.setsockopt(socket.SOL_SOCKET,socket.SO_REUSEADDR,1)

            try:
                self.ssock.bind(('',self.port))
            except Exception, e:
                dbg("WARNING: Failed to bind %s:%d: %s" , (self.ip,self.port,e))
                ok = False

            try:
                self.ssock.setsockopt(socket.IPPROTO_IP,socket.IP_ADD_MEMBERSHIP,self.mreq)
            except Exception, e:
                dbg('WARNING: Failed to join multicast group:',e)
                ok = False 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def bind_to_multicast(port=45454, multicast_group='239.255.43.21'):
    import struct
    # Create the socket
    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
    sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
    # Bind to the server address
    # sock.bind((multicast_group, port))
    sock.bind(('', port))
    # Tell the operating system to add the socket to the multicast group
    # on all interfaces.
    # group = socket.inet_aton(multicast_group)
    # mreq = struct.pack('4sL', group, socket.INADDR_ANY)
    mreq = struct.pack('4sl', socket.inet_aton(multicast_group), socket.INADDR_ANY)

    sock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, mreq)
    return sock 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def create_socket_ipv4_rx_mcast(self):
        try:
            sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
        except (IOError, OSError) as err:
            self.warning("Could not create IPv4 UDP socket: %s", err)
            return None
        self.enable_addr_and_port_reuse(sock)
        try:
            sock.bind((self._multicast_address, self._local_port))
        except (IOError, OSError) as err:
            self.warning("Could not bind IPv4 UDP socket to address %s port %d: %s",
                         self._multicast_address, self._local_port, err)
            return None
        if sock is None:
            return None
        if self._local_ipv4_address:
            req = struct.pack("=4s4s", socket.inet_aton(self._multicast_address),
                              socket.inet_aton(self._local_ipv4_address))
        else:
            req = struct.pack("=4sl", socket.inet_aton(self._multicast_address), socket.INADDR_ANY)
        try:
            sock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, req)
        except (IOError, OSError) as err:
            self.warning("Could not join IPv4 group %s for local address %s: %s",
                         self._multicast_address, self._local_ipv4_address, err)
            return None
        if not MACOS:
            try:
                # pylint:disable=no-member
                sock.setsockopt(socket.IPPROTO_IP, socket.IP_PKTINFO, 1)
            except (IOError, OSError) as err:
                # Warn, but keep going; this socket option is not supported on macOS
                self.warning("Could not set IP_PKTINFO socket option: %s", err)
        try:
            sock.setblocking(0)
        except (IOError, OSError) as err:
            self.warning("Could set multicast receive IPv4 UDP to non-blocking mode: %s", err)
            return None
        return sock 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def getfiles(self):
        sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
        sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
        sock.settimeout(3)
        sock.bind((self.mcast_grp, self.mcast_port))
        mreq = struct.pack("=4sl", socket.inet_aton(self.mcast_grp), socket.INADDR_ANY)
        sock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, mreq)
        loop = True
        chunk = {}
        chunk["end"] = 0
	N = 335
        #Wait for an end chunk to start by the beginning
        while not (chunk["end"]):
            chunk = self._getchunk(sock)
            firstfile = str(chunk["filetype"])+"_"+str(chunk["fileid"])
        #Loop until firstfile
        while (loop):
                xmldata=""
                chunk = self._getchunk(sock)
                #Discard headers
                body=chunk["data"]
                while not (chunk["end"]):
                        xmldata+=body
                        chunk = self._getchunk(sock)
                        body=chunk["data"]
                #Discard last 4bytes binary footer?
                xmldata+=body[:-4]
                self._files[str(chunk["filetype"])+"_"+str(chunk["fileid"])]=xmldata
		N = N - 1
                if (str(chunk["filetype"])+"_"+str(chunk["fileid"]) == firstfile or N == 0):
                    loop = False
        sock.close() 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def _multicast_struct(self, address):
        return struct.pack(
            '4sl', socket.inet_aton(address), socket.INADDR_ANY) 

# 需要导入模块: import socket [as 别名]
# 或者: from socket import INADDR_ANY [as 别名]
def init_socket(self):
        ok = True
        self.ip = '239.255.255.250'
        self.port = 1900
        try:
            #This is needed to join a multicast group
            self.mreq = struct.pack("4sl",socket.inet_aton(self.ip),socket.INADDR_ANY)

            #Set up server socket
            self.ssock = socket.socket(socket.AF_INET,socket.SOCK_DGRAM,socket.IPPROTO_UDP)
            self.ssock.setsockopt(socket.SOL_SOCKET,socket.SO_REUSEADDR,1)

            try:
                self.ssock.bind(('',self.port))
            except Exception as e:
                self.LogError("WARNING: Failed to bind %s:%d: %s" , (self.ip,self.port,e))
                ok = False

            try:
                self.ssock.setsockopt(socket.IPPROTO_IP,socket.IP_ADD_MEMBERSHIP,self.mreq)
            except Exception as e:
                self.LogError('WARNING: Failed to join multicast group:'+str(e))
                ok = False

        except Exception as e:
            self.LogError("Failed to initialize UPnP sockets:"+str(e))
            return False
        if ok:
            self.LogDebug("Listening for UPnP broadcasts")

    # ---------------- upnp_broadcast_responder.fileno -------------------------