本文整理汇总了Python中serial.win32.PURGE_TXCLEAR属性的典型用法代码示例。如果您正苦于以下问题：Python win32.PURGE_TXCLEAR属性的具体用法？Python win32.PURGE_TXCLEAR怎么用？Python win32.PURGE_TXCLEAR使用的例子？那么恭喜您, 这里精选的属性代码示例或许可以为您提供帮助。您也可以进一步了解该属性所在类serial.win32的用法示例。
在下文中一共展示了win32.PURGE_TXCLEAR属性的6个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Python代码示例。
示例1: reset_output_buffer
# 需要导入模块: from serial import win32 [as 别名]
# 或者: from serial.win32 import PURGE_TXCLEAR [as 别名]
def reset_output_buffer(self):
"""\
Clear output buffer, aborting the current output and discarding all
that is in the buffer.
"""
if not self._port_handle:
raise portNotOpenError
win32.PurgeComm(self._port_handle, win32.PURGE_TXCLEAR | win32.PURGE_TXABORT) 示例2: flushOutput
# 需要导入模块: from serial import win32 [as 别名]
# 或者: from serial.win32 import PURGE_TXCLEAR [as 别名]
def flushOutput(self):
"""Clear output buffer, aborting the current output and
discarding all that is in the buffer."""
if not self.hComPort: raise portNotOpenError
win32.PurgeComm(self.hComPort, win32.PURGE_TXCLEAR | win32.PURGE_TXABORT) 示例3: reset_output_buffer
# 需要导入模块: from serial import win32 [as 别名]
# 或者: from serial.win32 import PURGE_TXCLEAR [as 别名]
def reset_output_buffer(self):
"""\
Clear output buffer, aborting the current output and discarding all
that is in the buffer.
"""
if not self.is_open:
raise portNotOpenError
win32.PurgeComm(self._port_handle, win32.PURGE_TXCLEAR | win32.PURGE_TXABORT) 示例4: flushOutput
# 需要导入模块: from serial import win32 [as 别名]
# 或者: from serial.win32 import PURGE_TXCLEAR [as 别名]
def flushOutput(self):
"""\
Clear output buffer, aborting the current output and discarding all
that is in the buffer.
"""
if not self.hComPort: raise portNotOpenError
win32.PurgeComm(self.hComPort, win32.PURGE_TXCLEAR | win32.PURGE_TXABORT) 示例5: open
# 需要导入模块: from serial import win32 [as 别名]
# 或者: from serial.win32 import PURGE_TXCLEAR [as 别名]
def open(self):
"""Open port with current settings. This may throw a SerialException
if the port cannot be opened."""
if self._port is None:
raise SerialException("Port must be configured before it can be used.")
if self._isOpen:
raise SerialException("Port is already open.")
# the "\\.\COMx" format is required for devices other than COM1-COM8
# not all versions of windows seem to support this properly
# so that the first few ports are used with the DOS device name
port = self.portstr
try:
if port.upper().startswith('COM') and int(port[3:]) > 8:
port = '\\\\.\\' + port
except ValueError:
# for like COMnotanumber
pass
self.hComPort = win32.CreateFile(port,
win32.GENERIC_READ | win32.GENERIC_WRITE,
0, # exclusive access
None, # no security
win32.OPEN_EXISTING,
win32.FILE_ATTRIBUTE_NORMAL | win32.FILE_FLAG_OVERLAPPED,
0)
if self.hComPort == win32.INVALID_HANDLE_VALUE:
self.hComPort = None # 'cause __del__ is called anyway
raise SerialException("could not open port %r: %r" % (self.portstr, ctypes.WinError()))
try:
self._overlappedRead = win32.OVERLAPPED()
self._overlappedRead.hEvent = win32.CreateEvent(None, 1, 0, None)
self._overlappedWrite = win32.OVERLAPPED()
#~ self._overlappedWrite.hEvent = win32.CreateEvent(None, 1, 0, None)
self._overlappedWrite.hEvent = win32.CreateEvent(None, 0, 0, None)
# Setup a 4k buffer
win32.SetupComm(self.hComPort, 4096, 4096)
# Save original timeout values:
self._orgTimeouts = win32.COMMTIMEOUTS()
win32.GetCommTimeouts(self.hComPort, ctypes.byref(self._orgTimeouts))
self._reconfigurePort()
# Clear buffers:
# Remove anything that was there
win32.PurgeComm(self.hComPort,
win32.PURGE_TXCLEAR | win32.PURGE_TXABORT |
win32.PURGE_RXCLEAR | win32.PURGE_RXABORT)
except:
try:
self._close()
except:
# ignore any exception when closing the port
# also to keep original exception that happened when setting up
pass
self.hComPort = None
raise
else:
self._isOpen = True 示例6: open
# 需要导入模块: from serial import win32 [as 别名]
# 或者: from serial.win32 import PURGE_TXCLEAR [as 别名]
def open(self):
"""Open port with current settings. This may throw a SerialException
if the port cannot be opened."""
if self._port is None:
raise SerialException("Port must be configured before it can be used.")
if self._isOpen:
raise SerialException("Port is already open.")
# the "\\.\COMx" format is required for devices other than COM1-COM8
# not all versions of windows seem to support this properly
# so that the first few ports are used with the DOS device name
port = self.portstr
try:
if port.upper().startswith('COM') and int(port[3:]) > 8:
port = '\\\\.\\' + port
except ValueError:
# for like COMnotanumber
pass
self.hComPort = win32.CreateFile(port,
win32.GENERIC_READ | win32.GENERIC_WRITE,
0, # exclusive access
None, # no security
win32.OPEN_EXISTING,
win32.FILE_ATTRIBUTE_NORMAL | win32.FILE_FLAG_OVERLAPPED,
0)
if self.hComPort == win32.INVALID_HANDLE_VALUE:
self.hComPort = None # 'cause __del__ is called anyway
raise SerialException("could not open port %s: %s" % (self.portstr, ctypes.WinError()))
# Setup a 4k buffer
win32.SetupComm(self.hComPort, 4096, 4096)
# Save original timeout values:
self._orgTimeouts = win32.COMMTIMEOUTS()
win32.GetCommTimeouts(self.hComPort, ctypes.byref(self._orgTimeouts))
self._rtsState = win32.RTS_CONTROL_ENABLE
self._dtrState = win32.DTR_CONTROL_ENABLE
self._reconfigurePort()
# Clear buffers:
# Remove anything that was there
win32.PurgeComm(self.hComPort,
win32.PURGE_TXCLEAR | win32.PURGE_TXABORT |
win32.PURGE_RXCLEAR | win32.PURGE_RXABORT)
self._overlappedRead = win32.OVERLAPPED()
self._overlappedRead.hEvent = win32.CreateEvent(None, 1, 0, None)
self._overlappedWrite = win32.OVERLAPPED()
#~ self._overlappedWrite.hEvent = win32.CreateEvent(None, 1, 0, None)
self._overlappedWrite.hEvent = win32.CreateEvent(None, 0, 0, None)
self._isOpen = True