Python select.POLLERR属性代码示例

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def _parse_events(self, events):
        """Parse ``events``.

        ``events`` is a list of events as returned by
        :meth:`select.poll.poll()`.

        Yield all parsed events.

        """
        for fd, event_mask in events:
            if self._has_event(event_mask, select.POLLNVAL):
                raise IOError('File descriptor not open: {0!r}'.format(fd))
            elif self._has_event(event_mask, select.POLLERR):
                raise IOError('Error while polling fd: {0!r}'.format(fd))

            if self._has_event(event_mask, select.POLLIN):
                yield fd, 'r'
            if self._has_event(event_mask, select.POLLOUT):
                yield fd, 'w'
            if self._has_event(event_mask, select.POLLHUP):
                yield fd, 'h' 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def pollmask_to_str(mask):
        """
        Conver pool mast to string

        :param mask: poll return mask
        """
        out = ""
        if (mask & select.POLLIN):
            out += "IN "
        if (mask & select.POLLPRI):
            out += "PRI IN "
        if (mask & select.POLLOUT):
            out += "OUT "
        if (mask & select.POLLERR):
            out += "ERR "
        if (mask & select.POLLHUP):
            out += "HUP "
        if (mask & select.POLLMSG):
            out += "MSG "
        return out 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def poll(self, timeout=None):
        if not isinstance(timeout, (int, float, type(None))):
            raise TypeError("Invalid timeout type, should be integer, float, or None.")

        # Setup poll
        p = select.poll()
        p.register(self._line_fd, select.POLLIN | select.POLLPRI | select.POLLERR)

        # Scale timeout to milliseconds
        if isinstance(timeout, (int, float)) and timeout > 0:
            timeout *= 1000

        # Poll
        events = p.poll(timeout)

        return len(events) > 0 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def read(self, size=1):
        """Read size bytes from the serial port. If a timeout is set it may
           return less characters as requested. With no timeout it will block
           until the requested number of bytes is read."""
        if self.fd is None: raise portNotOpenError
        read = bytearray()
        poll = select.poll()
        poll.register(self.fd, select.POLLIN|select.POLLERR|select.POLLHUP|select.POLLNVAL)
        if size > 0:
            while len(read) < size:
                # print "\tread(): size",size, "have", len(read)    #debug
                # wait until device becomes ready to read (or something fails)
                for fd, event in poll.poll(self._timeout*1000):
                    if event & (select.POLLERR|select.POLLHUP|select.POLLNVAL):
                        raise SerialException('device reports error (poll)')
                    #  we don't care if it is select.POLLIN or timeout, that's
                    #  handled below
                buf = os.read(self.fd, size - len(read))
                read.extend(buf)
                if ((self._timeout is not None and self._timeout >= 0) or 
                    (self._interCharTimeout is not None and self._interCharTimeout > 0)) and not buf:
                    break   # early abort on timeout
        return bytes(read) 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def readwrite(obj, flags):
    try:
        if flags & select.POLLIN:
            obj.handle_read_event()
        if flags & select.POLLOUT:
            obj.handle_write_event()
        if flags & select.POLLPRI:
            obj.handle_expt_event()
        if flags & (select.POLLHUP | select.POLLERR | select.POLLNVAL):
            obj.handle_close()
    except OSError as e:
        if e.args[0] not in _DISCONNECTED:
            obj.handle_error()
        else:
            obj.handle_close()
    except _reraised_exceptions:
        raise
    except:
        obj.handle_error() 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def poll(self, timeout = None):
            events = self._poll.poll(timeout)
            processed = []
            for fd, evt in events:
                mask = ""
                if evt & (select_module.POLLIN | select_module.POLLPRI):
                    mask += "r"
                if evt & select_module.POLLOUT:
                    mask += "w"
                if evt & select_module.POLLERR:
                    mask += "e"
                if evt & select_module.POLLHUP:
                    mask += "h"
                if evt & select_module.POLLNVAL:
                    mask += "n"
                processed.append((fd, mask))
            return processed 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def poll(self, timeout):
            if timeout is not None:
                # convert from seconds to milliseconds
                timeout *= 1000
            changes = self._poll.poll(timeout)
            results = []
            for fd, events in changes:
                f = self._get_file_object(fd)
                if events & (select.POLLIN | select.POLLPRI):
                    results.append((f, POLLER_EVENT_READ))
                elif events & (select.POLLOUT):
                    results.append((f, POLLER_EVENT_WRITE))
                elif events & (select.POLLHUP):
                    results.append((f, POLLER_EVENT_HUP))
                elif events & (select.POLLERR | select.POLLNVAL):
                    results.append((f, POLLER_EVENT_ERROR))
            return results 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def __init__(self, termfd, endpoint, obj):
        """
        \param termfd is a file descriptor on which to select() to
        wait for termination requests from the main CallPipe_Callee
        thread
        \param Endpoint is an endpoint of a bidirectional multiprocessing.Pipe
        \param obj is the object on which to perform the method calls
        """
        threading.Thread.__init__(self)
        self.__endpoint = endpoint
        self.__obj      = obj
        self.__waitset  = select.poll()
        eventmask = select.POLLIN | select.POLLERR \
                    | select.POLLHUP | select.POLLPRI
        self.__waitset.register(self.__endpoint.fileno(), eventmask)
        self.__waitset.register(termfd, eventmask) 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def _ensure_pipes(self):

        "Ensure that the channel is capable of communicating."

        if self.read_pipe is None or self.write_pipe is None:

            # Accept any incoming connections.

            endpoint, address = self.endpoint.accept()
            self.read_pipe = endpoint.makefile("rb", 0)
            self.write_pipe = endpoint.makefile("wb", 0)

            # Monitor the write pipe for error conditions.

            fileno = self.write_pipe.fileno()
            self.poller.register(fileno, select.POLLOUT | select.POLLHUP | select.POLLNVAL | select.POLLERR) 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def _ensure_communication(self, timeout=None):

        "Ensure that sending and receiving are possible."

        while 1:
            self._ensure_pipes()
            fileno = self.write_pipe.fileno()
            fds = self.poller.poll(timeout)
            for fd, status in fds:
                if fd != fileno:
                    continue
                if status & (select.POLLHUP | select.POLLNVAL | select.POLLERR):

                    # Broken connection: discard it and start all over again.

                    self._reset_pipes()
                    break
            else:
                return 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def __init__(self, *args, **kwargs):
        result = super(self.__class__, self).__init__(*args, **kwargs)

        # Setting O_NONBLOCK on stdin, strout, stderr
        fcntl.fcntl(self.stdin, fcntl.F_SETFL, fcntl.fcntl(self.stdin, fcntl.F_GETFL) | os.O_NONBLOCK)
        fcntl.fcntl(self.stdout, fcntl.F_SETFL, fcntl.fcntl(self.stdout, fcntl.F_GETFL) | os.O_NONBLOCK)
        fcntl.fcntl(self.stderr, fcntl.F_SETFL, fcntl.fcntl(self.stderr, fcntl.F_GETFL) | os.O_NONBLOCK)
        
        # Using poll to get file status
        self.poller = Poll() # My own class with len()
        self.poller.register(self.stdin, select.POLLOUT | select.POLLERR | select.POLLHUP)
        self.poller.register(self.stdout, select.POLLIN | select.POLLPRI | select.POLLERR | select.POLLHUP)
        self.poller.register(self.stderr, select.POLLIN | select.POLLPRI | select.POLLERR | select.POLLHUP)

        return result

    #def __del__(self, *args, **kwargs):
        #super(self.__class__, self).__del__()
        #map(self.poller.unregister, (self.stdin, self.stdout, self.stderr)) 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def readwrite(obj, flags):
    try:
        if flags & select.POLLIN:
            obj.handle_read_event()
        if flags & select.POLLOUT:
            obj.handle_write_event()
        if flags & select.POLLPRI:
            obj.handle_expt_event()
        if flags & (select.POLLHUP | select.POLLERR | select.POLLNVAL):
            obj.handle_close()
    except socket.error, e:
        if e.args[0] not in _DISCONNECTED:
            obj.handle_error()
        else:
            obj.handle_close() 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def poll2(timeout=0.0, map=None):
    # Use the poll() support added to the select module in Python 2.0
    if map is None:
        map = socket_map
    if timeout is not None:
        # timeout is in milliseconds
        timeout = int(timeout*1000)
    pollster = select.poll()
    if map:
        for fd, obj in map.items():
            flags = 0
            if obj.readable():
                flags |= select.POLLIN | select.POLLPRI
            if obj.writable():
                flags |= select.POLLOUT
            if flags:
                # Only check for exceptions if object was either readable
                # or writable.
                flags |= select.POLLERR | select.POLLHUP | select.POLLNVAL
                pollster.register(fd, flags)
        try:
            r = pollster.poll(timeout)
        except select.error, err:
            if err.args[0] != EINTR:
                raise
            r = []
        for fd, flags in r:
            obj = map.get(fd)
            if obj is None:
                continue
            readwrite(obj, flags) 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def poll2(timeout=0.0, map=None):
    # Use the poll() support added to the select module in Python 2.0
    if map is None:
        map = socket_map
    if timeout is not None:
        # timeout is in milliseconds
        timeout = int(timeout*1000)
    pollster = select.poll()
    if map:
        for fd, obj in map.items():
            flags = 0
            if obj.readable():
                flags |= select.POLLIN | select.POLLPRI
            # accepting sockets should not be writable
            if obj.writable() and not obj.accepting:
                flags |= select.POLLOUT
            if flags:
                # Only check for exceptions if object was either readable
                # or writable.
                flags |= select.POLLERR | select.POLLHUP | select.POLLNVAL
                pollster.register(fd, flags)
        try:
            r = pollster.poll(timeout)
        except select.error, err:
            if err.args[0] != EINTR:
                raise
            r = []
        for fd, flags in r:
            obj = map.get(fd)
            if obj is None:
                continue
            readwrite(obj, flags) 

# 需要导入模块: import select [as 别名]
# 或者: from select import POLLERR [as 别名]
def read(self, size=1):
        """\
        Read size bytes from the serial port. If a timeout is set it may
        return less characters as requested. With no timeout it will block
        until the requested number of bytes is read.
        """
        if not self.is_open:
            raise portNotOpenError
        read = bytearray()
        poll = select.poll()
        poll.register(self.fd, select.POLLIN | select.POLLERR | select.POLLHUP | select.POLLNVAL)
        if size > 0:
            while len(read) < size:
                # print "\tread(): size",size, "have", len(read)    #debug
                # wait until device becomes ready to read (or something fails)
                for fd, event in poll.poll(self._timeout * 1000):
                    if event & (select.POLLERR | select.POLLHUP | select.POLLNVAL):
                        raise SerialException('device reports error (poll)')
                    #  we don't care if it is select.POLLIN or timeout, that's
                    #  handled below
                buf = os.read(self.fd, size - len(read))
                read.extend(buf)
                if ((self._timeout is not None and self._timeout >= 0) or
                        (self._inter_byte_timeout is not None and self._inter_byte_timeout > 0)) and not buf:
                    break   # early abort on timeout
        return bytes(read)