Python opcode.EXTENDED_ARG属性代码示例

# 需要导入模块: import opcode [as 别名]
# 或者: from opcode import EXTENDED_ARG [as 别名]
def _unpack_opargs(code, inserted_code_list, current_index):
    """
    Modified version of `_unpack_opargs` function from module `dis`.
    We have to use it, because sometimes code can be in an inconsistent state: if EXTENDED_ARG
    operator was introduced into the code, but it hasn't been inserted into `code_list` yet.
    In this case we can't use standard `_unpack_opargs` and we should check whether there are
    some new operators in `inserted_code_list`.
    """
    extended_arg = 0
    for i in range(0, len(code), 2):
        op = code[i]
        if op >= HAVE_ARGUMENT:
            if not extended_arg:
                # in case if we added EXTENDED_ARG, but haven't inserted it to the source code yet.
                for code_index in range(current_index, len(inserted_code_list)):
                    inserted_offset, inserted_code = inserted_code_list[code_index]
                    if inserted_offset == i and inserted_code[0] == EXTENDED_ARG:
                        extended_arg = inserted_code[1] << 8
            arg = code[i + 1] | extended_arg
            extended_arg = (arg << 8) if op == EXTENDED_ARG else 0
        else:
            arg = None
        yield (i, op, arg) 

# 需要导入模块: import opcode [as 别名]
# 或者: from opcode import EXTENDED_ARG [as 别名]
def _add_attr_values_from_insert_to_original(original_code, insert_code, insert_code_list, attribute_name, op_list):
    """
    This function appends values of the attribute `attribute_name` of the inserted code to the original values,
     and changes indexes inside inserted code. If some bytecode instruction in the inserted code used to call argument
     number i, after modification it calls argument n + i, where n - length of the values in the original code.
     So it helps to avoid variables mixing between two pieces of code.

    :param original_code: code to modify
    :param insert_code: code to insert
    :param insert_code_obj: bytes sequence of inserted code, which should be modified too
    :param attribute_name: name of attribute to modify ('co_names', 'co_consts' or 'co_varnames')
    :param op_list: sequence of bytecodes whose arguments should be changed
    :return: modified bytes sequence of the code to insert and new values of the attribute `attribute_name` for
    original code
    """
    orig_value = getattr(original_code, attribute_name)
    insert_value = getattr(insert_code, attribute_name)
    orig_names_len = len(orig_value)
    code_with_new_values = list(insert_code_list)
    offset = 0
    while offset < len(code_with_new_values):
        op = code_with_new_values[offset]
        if op in op_list:
            new_val = code_with_new_values[offset + 1] + orig_names_len
            if new_val > MAX_BYTE:
                code_with_new_values[offset + 1] = new_val & MAX_BYTE
                code_with_new_values = code_with_new_values[:offset] + [EXTENDED_ARG, new_val >> 8] + \
                                       code_with_new_values[offset:]
                offset += 2
            else:
                code_with_new_values[offset + 1] = new_val
        offset += 2
    new_values = orig_value + insert_value
    return bytes(code_with_new_values), new_values 

# 需要导入模块: import opcode [as 别名]
# 或者: from opcode import EXTENDED_ARG [as 别名]
def add_jump_instruction(jump_arg, code_to_insert):
    """
    Note: although it's adding a POP_JUMP_IF_TRUE, it's actually no longer used now
    (we could only return the return and possibly the load of the 'None' before the
    return -- not done yet because it needs work to fix all related tests).
    """
    extended_arg_list = []
    if jump_arg > MAX_BYTE:
        extended_arg_list += [EXTENDED_ARG, jump_arg >> 8]
        jump_arg = jump_arg & MAX_BYTE

    # remove 'RETURN_VALUE' instruction and add 'POP_JUMP_IF_TRUE' with (if needed) 'EXTENDED_ARG'
    return list(code_to_insert.co_code[:-RETURN_VALUE_SIZE]) + extended_arg_list + [opmap['POP_JUMP_IF_TRUE'], jump_arg] 

# 需要导入模块: import opcode [as 别名]
# 或者: from opcode import EXTENDED_ARG [as 别名]
def compare_bytes_sequence(self, code1, code2, inserted_code_size):
        """
        Compare code after modification and the real code
        Since we add POP_JUMP_IF_TRUE instruction, we can't compare modified code and the real code. That's why we
        allow some inaccuracies while code comparison
        :param code1: result code after modification
        :param code2: a real code for checking
        :param inserted_code_size: size of inserted code
        """
        seq1 = [(offset, op, arg) for offset, op, arg in dis._unpack_opargs(code1)]
        seq2 = [(offset, op, arg) for offset, op, arg in dis._unpack_opargs(code2)]
        assert len(seq1) == len(seq2), "Bytes sequences have different lengths %s != %s" % (len(seq1), len(seq2))
        for i in range(len(seq1)):
            of, op1, arg1 = seq1[i]
            _, op2, arg2 = seq2[i]
            if op1 != op2:
                if op1 == 115 and op2 == 1:
                    # it's ok, because we added POP_JUMP_IF_TRUE manually, but it's POP_TOP in the real code
                    # inserted code - 2 (removed return instruction) - real code inserted
                    # Jump should be done to the beginning of inserted fragment
                    self.assertEqual(arg1, of - (inserted_code_size - 2))
                    continue
                elif op1 == EXTENDED_ARG and op2 == 12:
                    # we added a real UNARY_NOT to balance EXTENDED_ARG added by new jump instruction
                    # i.e. inserted code size was increased as well
                    inserted_code_size += 2
                    continue

            self.assertEqual(op1, op2, "Different operators at offset {}".format(of))
            if arg1 != arg2:
                if op1 in (100, 101, 106, 116):
                    # Sometimes indexes of variable names and consts may be different, when we insert them, it's ok
                    continue
                else:
                    self.assertEqual(arg1, arg2, "Different arguments at offset {}".format(of)) 

# 需要导入模块: import opcode [as 别名]
# 或者: from opcode import EXTENDED_ARG [as 别名]
def decode_codeobj(codeobj):
    # adapted from dis.dis
    extended_arg = 0
    if is_py3k:
        codestr = codeobj.co_code
    else:
        codestr = [ord(ch) for ch in codeobj.co_code]
    free = None
    i = 0
    while i < len(codestr):
        op = codestr[i]
        opname = opcode.opname[op]
        i += 1
        argval = None
        if op >= opcode.HAVE_ARGUMENT:
            oparg = codestr[i] + codestr[i + 1] * 256 + extended_arg
            i += 2
            extended_arg = 0
            if op == opcode.EXTENDED_ARG:
                extended_arg = oparg * 65536
                continue
            
            if op in opcode.hasconst:
                argval = codeobj.co_consts[oparg]
            elif op in opcode.hasname:
                argval = codeobj.co_names[oparg]
            elif op in opcode.hasjrel:
                argval = i + oparg
            elif op in opcode.haslocal:
                argval = codeobj.co_varnames[oparg]
            elif op in opcode.hascompare:
                argval = opcode.cmp_op[oparg]
            elif op in opcode.hasfree:
                if free is None:
                    free = codeobj.co_cellvars + codeobj.co_freevars
                argval = free[oparg]

        yield (opname, argval) 

# 需要导入模块: import opcode [as 别名]
# 或者: from opcode import EXTENDED_ARG [as 别名]
def instructions(code_obj):
    # easy for python 3.4+
    if sys.version_info >= (3, 4):
        for inst in dis.Bytecode(code_obj):
            yield inst
    else:
        # otherwise we have to manually parse
        code = code_obj.co_code
        NewInstruction = namedtuple('Instruction', ('opcode', 'arg'))
        if six.PY2:
            code = map(ord, code)
        i, L = 0, len(code)
        extended_arg = 0
        while i < L:
            op = code[i]
            i += 1
            if op < opcode.HAVE_ARGUMENT:
                yield NewInstruction(op, None)
                continue
            oparg = code[i] + (code[i + 1] << 8) + extended_arg
            extended_arg = 0
            i += 2
            if op == opcode.EXTENDED_ARG:
                extended_arg = oparg << 16
                continue
            yield NewInstruction(op, oparg) 

# 需要导入模块: import opcode [as 别名]
# 或者: from opcode import EXTENDED_ARG [as 别名]
def write_instruction(op, arg):
    if sys.version_info < (3, 6):
        if arg is None:
            return [chr(op)]
        elif arg <= 65536:
            return [chr(op), chr(arg & 255), chr((arg >> 8) & 255)]
        elif arg <= 4294967296:
            return [
                chr(opcode.EXTENDED_ARG),
                chr((arg >> 16) & 255),
                chr((arg >> 24) & 255),
                chr(op),
                chr(arg & 255),
                chr((arg >> 8) & 255)
            ]
        else:
            raise ValueError("Invalid oparg: {0} is too large".format(oparg))
    else:  # python 3.6+ uses wordcode instead of bytecode and they already supply all the EXTENDEND_ARG ops :)
        if arg is None:
            return [chr(op), 0]
        return [chr(op), arg & 255]
        # the code below is for case when extended args are to be determined automatically
        # if op == opcode.EXTENDED_ARG:
        #     return []  # this will be added automatically
        # elif arg < 1 << 8:
        #     return [chr(op), arg]
        # elif arg < 1 << 32:
        #     subs = [1<<24, 1<<16, 1<<8]  # allowed op extension sizes
        #     for sub in subs:
        #         if arg >= sub:
        #             fit = int(arg / sub)
        #             return [chr(opcode.EXTENDED_ARG), fit]  + write_instruction(op, arg - fit * sub)
        # else:
        #     raise ValueError("Invalid oparg: {0} is too large".format(oparg)) 

# 需要导入模块: import opcode [as 别名]
# 或者: from opcode import EXTENDED_ARG [as 别名]
def instructions(code_obj):
    # easy for python 3.4+
    if sys.version_info >= (3, 4):
        for inst in dis.Bytecode(code_obj):
            yield inst
    else:
        # otherwise we have to manually parse
        code = code_obj.co_code
        NewInstruction = namedtuple('Instruction', ('opcode', 'arg'))
        if six.PY2:
            code = map(ord, code)
        i, L = 0, len(code)
        extended_arg = 0
        while i < L:
            op = code[i]
            i+= 1
            if op < opcode.HAVE_ARGUMENT:
                yield NewInstruction(op, None)
                continue
            oparg = code[i] + (code[i+1] << 8) + extended_arg
            extended_arg = 0
            i += 2
            if op == opcode.EXTENDED_ARG:
                extended_arg = oparg << 16
                continue
            yield NewInstruction(op, oparg) 

# 需要导入模块: import opcode [as 别名]
# 或者: from opcode import EXTENDED_ARG [as 别名]
def write_instruction(op, arg):
    if sys.version_info < (3, 6):
        if arg is None:
            return [chr(op)]
        elif arg <= 65536:
            return [chr(op), chr(arg & 255), chr((arg >> 8) & 255)]
        elif arg <= 4294967296:
            return [chr(opcode.EXTENDED_ARG),
                    chr((arg >> 16) & 255),
                    chr((arg >> 24) & 255),
                    chr(op),
                    chr(arg & 255),
                    chr((arg >> 8) & 255)]
        else:
            raise ValueError("Invalid oparg: {0} is too large".format(oparg))
    else:  # python 3.6+ uses wordcode instead of bytecode and they already supply all the EXTENDEND_ARG ops :)
        if arg is None:
            return [chr(op), 0]
        return [chr(op), arg & 255]
        # the code below is for case when extended args are to be determined automatically
        # if op == opcode.EXTENDED_ARG:
        #     return []  # this will be added automatically
        # elif arg < 1 << 8:
        #     return [chr(op), arg]
        # elif arg < 1 << 32:
        #     subs = [1<<24, 1<<16, 1<<8]  # allowed op extension sizes
        #     for sub in subs:
        #         if arg >= sub:
        #             fit = int(arg / sub)
        #             return [chr(opcode.EXTENDED_ARG), fit]  + write_instruction(op, arg - fit * sub)
        # else:
        #     raise ValueError("Invalid oparg: {0} is too large".format(oparg)) 

# 需要导入模块: import opcode [as 别名]
# 或者: from opcode import EXTENDED_ARG [as 别名]
def disassemble(co):
    code = co.co_code
    labels = dis.findlabels(code)
    linestarts = dict(dis.findlinestarts(co))
    n = len(code)
    i = 0
    extended_arg = 0
    free = None
    lineno = None
    while i < n:
        c = code[i]
        op = ord(c)
        lineno = linestarts.get(i, lineno)
        is_label = i in labels
        ist = i
        i += 1
        if op >= opcode.HAVE_ARGUMENT:
            oparg = ord(code[i]) + ord(code[i + 1]) * 256 + extended_arg
            extended_arg = 0
            i += 2
            if op == opcode.EXTENDED_ARG:
                extended_arg = oparg * 65536L
            if op in opcode.hasconst:
                arg = co.co_consts[oparg]
            elif op in opcode.hasname:
                arg = co.co_names[oparg]
            elif op in opcode.hasjrel:
                arg = i + oparg
            elif op in opcode.haslocal:
                arg = co.co_varnames[oparg]
            elif op in opcode.hascompare:
                arg = opcode.cmp_op[oparg]
            elif op in opcode.hasfree:
                if free is None:
                    free = co.co_cellvars + co.co_freevars
                arg = free[oparg]
            else:
                arg = NOVAL
        else:
            arg = NOVAL
        yield ist, lineno, is_label, opcode.opname[op], arg 

# 需要导入模块: import opcode [as 别名]
# 或者: from opcode import EXTENDED_ARG [as 别名]
def emit(self, op, oparg, arg=None, lineno=-1):
    """
      Writes the bytecode and lnotab.
    """
    bytecode_inc, line_inc = 0, -1

    if op >= opcode.HAVE_ARGUMENT and oparg > 0xffff:
      self.append_code(opcode.EXTENDED_ARG)
      self.append_code((oparg >> 16) & 0xff)
      self.append_code((oparg >> 24) & 0xff)
      bytecode_inc += 3

    self.append_code(op)
    bytecode_inc += 1

    if op >= opcode.HAVE_ARGUMENT:
      self.append_code(oparg & 0xff)
      self.append_code((oparg >> 8) & 0xff)
      bytecode_inc += 2

    # We also adjust the lnotabs field
    if self.prev_lineno == -1:
      line_inc = 0
    else:
      line_inc = lineno - self.prev_lineno

    if line_inc == 0 and bytecode_inc == 0:
      self.lnotab.append(0)  # bytecode increment
      self.lnotab.append(0)  # lineno increment
    else:
      while bytecode_inc > 255:
        self.lnotab.append(255)
        self.lnotab.append(0)
        bytecode_inc -= 255

      while line_inc > 255:
        self.lnotab.append(0)
        self.lnotab.append(255)
        line_inc -= 255

      # Add the remainder
      self.lnotab.append(bytecode_inc)
      self.lnotab.append(line_inc)

    self.prev_lineno = lineno 

# 需要导入模块: import opcode [as 别名]
# 或者: from opcode import EXTENDED_ARG [as 别名]
def _update_label_offsets(code_obj, breakpoint_offset, breakpoint_code_list):
    """
    Update labels for the relative and absolute jump targets
    :param code_obj: code to modify
    :param breakpoint_offset: offset for the inserted code
    :param breakpoint_code_list: size of the inserted code
    :return: bytes sequence with modified labels; list of tuples (resulting offset, list of code instructions) with
    information about all inserted pieces of code
    """
    inserted_code = list()
    # the list with all inserted pieces of code
    inserted_code.append((breakpoint_offset, breakpoint_code_list))
    code_list = list(code_obj)
    j = 0

    while j < len(inserted_code):
        current_offset, current_code_list = inserted_code[j]
        offsets_for_modification = []

        for offset, op, arg in _unpack_opargs(code_list, inserted_code, j):
            if arg is not None:
                if op in dis.hasjrel:
                    # has relative jump target
                    label = offset + 2 + arg
                    if offset < current_offset < label:
                        # change labels for relative jump targets if code was inserted inside
                        offsets_for_modification.append(offset)
                elif op in dis.hasjabs:
                    # change label for absolute jump if code was inserted before it
                    if current_offset < arg:
                        offsets_for_modification.append(offset)
        for i in range(0, len(code_list), 2):
            op = code_list[i]
            if i in offsets_for_modification and op >= dis.HAVE_ARGUMENT:
                new_arg = code_list[i + 1] + len(current_code_list)
                if new_arg <= MAX_BYTE:
                    code_list[i + 1] = new_arg
                else:
                    # handle bytes overflow
                    if i - 2 > 0 and code_list[i - 2] == EXTENDED_ARG and code_list[i - 1] < MAX_BYTE:
                        # if new argument > 255 and EXTENDED_ARG already exists we need to increase it's argument
                        code_list[i - 1] += 1
                    else:
                        # if there isn't EXTENDED_ARG operator yet we have to insert the new operator
                        extended_arg_code = [EXTENDED_ARG, new_arg >> 8]
                        inserted_code.append((i, extended_arg_code))
                    code_list[i + 1] = new_arg & MAX_BYTE

        code_list = code_list[:current_offset] + current_code_list + code_list[current_offset:]

        for k in range(len(inserted_code)):
            offset, inserted_code_list = inserted_code[k]
            if current_offset < offset:
                inserted_code[k] = (offset + len(current_code_list), inserted_code_list)
        j += 1

    return bytes(code_list), inserted_code